Used Hot Water High Pressure Cleaner for sale (43,934)

Condition: used, Year of construction: 2001, operating hours: 78,118 h, High Pressure piston compressor, make Atelier Francois, type: CE68C, 510 U/min, 45m³/min, 40 bar, 418 kW, with frequency transformer with Emmerson Motor from 2017, compressed air tank make Römer 1000 lt content 45 bar, control cabinet, built 2001, 78118 operating hours, since 12/2023 dismantled. Cjdpfotvmpcox Aacjhd

Condition: used, High-pressure piston compressor Manufacturer: ATELIER FRANÇOIS Model: CE 2B Chsdpfx Aasw Tmfxsced Year of manufacture: 1993 Nominal capacity: 390 m3/h Current capacity: approx. 300 m3/h Pressure: 40 bar Technical condition: used, requires technical inspection, control cabinet missing

Year of construction: 2024, condition: as good as new (ex-display), AVAILABLE IMMEDIATELY! Manual cleaning is carried out using special gloves in the front section. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. A temperature of up to 60 °C can be set for the cleaning fluid in these devices. The pressure can be set from 1- 80 bar. Technical data: Work surface: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg Optional up to 150 kg Spray pressure: 1-80 bar adjustable Tank volume: 75 liters / heating capacity 2kW Basic version: - Blow-off gun in the interior - Frame, feet, cover and housing made of stainless steel - Removable stainless steel plates above the tank Codpfx Aaef A Nqqjcjhd - Flap can be opened upwards with 2 handles and gloves - Tempered glass window - Door opening/closing system supported by gas struts - Door opening monitored by safety limit switch - Filter on the suction side of the pump (500 micron) - Foot switch for operating the cleaning pump - Interior lighting - Neoprene gloves L 600mm (chemical resistant)- Adjustable feet +/- 50 mm - External mini-pneumatic oil separator

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Sugino high pressure plunger pump Type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Chjdor A Dm Ispfx Aaced Water pressure 600 bar Flow rate 43 L/min Weight 1100kg The set includes a set of gaskets and consumables for the pump

Year of construction: 2018, condition: as good as new (ex-display), GHIBLI DHR 8 is the standalone system for thermal weeding: the 100% ecological solution against weeds thanks to the action of high temperature saturated steam. Thermal weeding has many advantages for the environment and health as: • it uses only water • it is safe, even in close proximity to sensitive places such as kindergartens, schools, hospitals. • its use does not require prior notification under the legislation in the field; • it is safe for exposed workers, people and animals, during and after the treatments; Chjdpfx Aasg A Rhkjced

Condition: good (used), Extractor for laser, welding, dust, high-pressure self-cleaning LINCOLN brand. Cartridge filter cleaned during operation by pulses of compressed air, thus high efficiency of the device. High-pressure turbine motor with 5.5 Kw and a vacuum of 17.650 PA! Codpfxsg Th S Ao Aacshd capacity 500 m3/h

Condition: used, Jaw width: 125 mm Chsdpfx Aeu Sh Huoacsd Clamping width: 220 mm

Condition: excellent (used), Compressor type: Dry air Revolutions per minute 750 Outlet pressure: 42 bar Volume spawned: Number of cylinder lines 2/4 stages Supplied air: 7.73m³ / min; 464m³ / h Codewcgc Rspfx Aacjhd Motor power: 90kW

Year of construction: 2009, condition: used, functionality: unexamined, High pressure ventilator 0.75 kW, 2830rpm Codpfewczdpex Aacohd

Year of construction: 2023, operating hours: 0 h, condition: new, machine/vehicle number: 12134, Teljesítmény: 1000 L/óra, 7,5 kW Maximum hőmérséklet: 90 °C Feszültség: 400 V Méret: 1300x1600x1500 mm Súly:1000 kg FBF 1000 High pressure homogeniser Specification: Capacity: 1000 L/h 7,5 kW Maximum temperature: 90 °C Two homogenizing phase: 1.: 200 bar, 2.: 50 bar Feeding pressure requested: 2 bar Voltage: 400 V Consumption of water: 70-90 L/h Consumption of air: 5 bar, 0,3 Nl/minute Gross size: 1300x1600x1500 mm Gross weight:1000 kg Compression head and valve: - milled from one block - high pressure resistant pistons - vibration-free Structure: - vibration free pump - power transmission through „V” belts, 1:2 - automatic oil lubrication with oil level indicator Accessories: - wearing part set - tools - oil FBF 1000 Hochdruckhomogenisator - Leistung: 1000 L / h 7,5 kW - Maximale Betriebstemperatur: 90 ° C. - Zweistufige Homogenisierung: 1 .: 200 bar, 2 .: 50 bar - Versorgungsdruck mindestens 2 bar - Stromspannung: 400V - Wasserbedarf: 70-90 L / h Codjiu Hyzspfx Aacehd - Luftverbrauch: 5 bar, 0,3 Nl / min Kompressionskopf und Ventil: - Ein Block, der mit einer CNC-gesteuerten Maschine aus einem Block gefräst wurde, mit 5 Jahren Garantie. - Kolben aus speziell gehärtetem Edelstahl. - Energie- und kostengünstige Ventile sorgen aufgrund ihrer hohen Stabilität für einen vibrationsfreien Betrieb. Struktur: - Pumpe aus hochwertigem vibrationsfreiem Gusseisen - Die Übertragung erfolgt auf "Keilriemen" mit Doppelübertragung - 3-phasiger 4-poliger Motor - Ölgeschmiertes Gehäuse mit Ölstandsfenster Zubehör: - Verschleißteilset - Werkzeuge für die Wartung - Schmieröl - Anweisungen

Condition: new, Year of construction: 2025, functionality: fully functional, Mobile high-pressure waste container washers Cedpfxswmln Ts Aacehd

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Cjdpfx Aerhidmeacjhd Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 2010, functionality: fully functional, Max. working temperature 90° C. Max. working pressure: 2 kg/cm². Power 3.000.000 kcal Fuel: wood waste The MTN boiler is a hot water generator that uses sawdust as fuel, with "AUTOFOCO" type burner loading. The boiler is of horizontal type Tubular plates and shell are made of thick carbon steel sheet. The core is covered with refractory cement with a high percentage of alumina. At the rear there is a cast iron grate for burning solid pieces of wood, calculated for an output equal to 60% of the rated output of the boiler. The tube bundles are made of carbon steel. The base incorporating the hearth is of large dimensions, to allow the burner to be mounted with a plug. The boiler is supplied with an air distribution manifold. The boiler body is insulated with mineral wool and covered with cast iron Accessories: - 1 Adjustable thermostat - 1 safety thermostat - 1 safety thermostat with manual start - 1 thermometer - 1 hydrometer - 1 combustion control device - 1 thermostatically actuated valve positioned in the flue tube MANUAL FEED GRILL is a fixed grill made of special nodular cast iron bars, fixed in refractory material, easily interchangeable. 1 Complete electrical components, motor protections, contactors. 1 Complete set of wiring accessories Chjdotywzqopfx Aacsd 1 General circuit breaker 1 Power supply for auxiliary circuits 1 Circuit diagram 1 Pressure gauge 2 Temperature probes 1 Dust suction system consisting of a fan with belt transmission, with decanter cyclone, boiler-cyclone connections, cyclone-fan, fan-fan, fan-smoke stack, in painted carbon steel. 1 Chimney

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 521 S ÜÇLÜ SU TAHLİYE MAKİNESİ YÜKSEK FREKANS MOTORLU, - Possibility of opening water drainage channels for PVC and Aluminum Profiles - Possibility for three groups to work separately - Ability of the water drainage system to operate in an angled position - Pneumatic profile clamping system - Fully automated system operation - More efficient and long-term operation with high frequency motors (18000 rpm) - Vibration-free and better quality grooving due to high frequency motor Cedpfx Ajra Nrqjacohd

Year of construction: 2023, operating hours: 0 h, condition: new, machine/vehicle number: 1234, Teljesítmény: 300 L/óra, 4 kW Maximum hőmérséklet: 90 °C Feszültség: 400 V Méret: 850 x 1150 x 920 mm Súly: 365 kg FBF 1000 High pressure homogeniser Specification: Capacity: 300 L/h , 4 kW Maximum temperature: 90 °C Two homogenizing phase: 1.: 200 bar, 2.: 50 bar Feeding pressure requested: 2 bar Voltage: 400 V Consumption of water: 60 L/h Consumption of air: 5 bar, 0,3 Nl/minute Gross size: 850 x 1150 x 920 mm Gross weight: 365 kg Compression head and valve: - milled from one block - high pressure resistant pistons - vibration-free Structure: - vibration free pump - power transmission through „V” belts, 1:2 - automatic oil lubrication with oil level indicator Accessories: - wearing part set - tools - oil FBF 1000 Hochdruckhomogenisator - Leistung: 300 L / h 4 kW - Maximale Betriebstemperatur: 90 ° C. - Zweistufige Homogenisierung: 1 .: 200 bar, 2 .: 50 bar - Versorgungsdruck mindestens 2 bar - Stromspannung: 400V - Wasserbedarf: 60 L / h - Luftverbrauch: 5 bar, 0,3 Nl / min - Gewicht: 365 kg - Abmessungen: 850 x 1150 x 920 mm Kompressionskopf und Ventil: - Ein Block, der mit einer CNC-gesteuerten Maschine aus einem Block gefräst wurde, mit 5 Jahren Garantie. - Kolben aus speziell gehärtetem Edelstahl. - Energie- und kostengünstige Ventile sorgen aufgrund ihrer hohen Stabilität für einen vibrationsfreien Betrieb. Struktur: - Pumpe aus hochwertigem vibrationsfreiem Gusseisen - Die Übertragung erfolgt auf "Keilriemen" mit Doppelübertragung - 3-phasiger 4-poliger Motor - Ölgeschmiertes Gehäuse mit Ölstandsfenster Chodpfx Aajiu Hypscjd Zubehör: - Verschleißteilset - Werkzeuge für die Wartung - Schmieröl - Anweisungen

Condition: used, digital gauge Digibar Chedpfx Aaecf Rb Teced is suitable for measuring static and quasi-static fluid and gas pressures. PE 100 is the battery version.

Condition: used, Pressure watertight tie point, formwork accessories, KRASO tie point Chjdeb Eu S Ijpfx Aacod -monolithic connection of the vulcanized KRASO locking disc -easy installation -No assembly on site -easy closing of the clamping point -no time-consuming gluing of the plugs -no wage-intensive rework -absolutely watertight clamping point -Inside and OUTSIDE pressure water-tight tested -from company liquidation -Total length: 300 mm -1 mesh box approx. 350 pieces -Weight: including box 142 kg

Year of construction: 2022, condition: new, Kairos Engineering's energy recovery system is a technology that recovers the heat contained in the industrial hot wastewater, to transfer it to other water to be put back into the production process. The transfer takes place by means of shell and tube heat exchangers in which the two fluids, which never meet directly in order not to undergo contamination, they are sent against the current, that is, one against the other. Indicative savings of 30%. Cjdjh Akv Hjpfx Aacohd

Condition: used, Year of construction: 2007, max. plate size 625 x 550 mm max. speed plates 30 /h Codpfx Aajvfxi Nocohd resolution of impression max. 2540 dpi Violet Laser incl. Rip

Condition: used, axle configuration: 3 axles, first registration: 07/2020, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2020, Axle configuration Refenmaß: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 20%; Tire tread right: 20% Rear axle 2: Tire profile left: 10%; Tire profile right: 10% Rear axle 3: Tire profile left: 10%; Tire profile right: 10% Weights Unladen weight: 5,940 kg Chodpfxjxty N No Aacjd Payload: 32,060 kg GVW: 38,000 kg Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 07/2020, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2020, Axle configuration Axle brand: SAF Chedpjxty N Asfx Aacsd Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Reference dimension: 385/65 R22.5; Tire tread left: 10%; Tire tread right: 10% Rear axle 2: Refenmaß: 385/55 R22.5; Tire profile left: 15%; Tire profile right: 15% Rear axle 3: Reference dimension: 385/55 R22.5; Tire tread left: 45%; Tire tread right: 45% Weights Unladen weight: 5,940 kg Payload: 32,060 kg GVW: 38,000 kg Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 11/2020, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2020, Axle configuration Refenmaß: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread left: 10%; Tire tread right: 10% Rear axle 2: Tire profile left: 15%; Tire profile right: 15% Rear axle 3: Tire profile left: 20%; Tire profile right: 20% Weights Unladen weight: 5,940 kg Payload: 32,060 kg GVW: 38,000 kg Chjdpsxtyzlofx Aacod Condition Damage: none

Condition: used, axle configuration: 3 axles, first registration: 03/2023, suspension: air, color: other, Year of construction: 2023, Axle brand: BPW Brakes: Disc brakes Rear axle 1: Steered Rear axle 2: Suspension: Air suspension Rear axle 3: Suspension: Air suspension Chsdpfx Asxtynlsaced Damage: None

Condition: used, axle configuration: > 3 axles, first registration: 01/2024, suspension: steel, color: other, Year of construction: 2024, Suspension: leaf suspension Damage: none Chjdpfxjxtyh So Aacjd

Condition: used, first registration: 02/2016, color: other, Year of construction: 2016, Unladen weight: 8,440 kg Payload: 30,560 kg Chodpoxtyfkefx Aaced Gross vehicle weight: 39,000 kg Damage: none