Used Hurco Vmx 42 T for sale (157)

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor. Tjdpjzh I Agefx Abujd

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Tsdpfxey Tx Nqe Abued

Condition: good (used), Year of construction: 2020, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Tedpfx Aez Ha Ayobuod Spindle speed 40 – 12000 rpm, Hurco Winmax 5 Control, Spindle taper DIN40, 30 ATC, Coolant, Low volt light, Swarf Conveyor

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table width: 510 mm, table height: 610 mm, table length: 760 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The machine underwent a complete overhaul and modernization in the mid-2000s. The machine is in excellent condition and offers very high precision. It features a 10,000 rpm spindle and a high-pressure coolant system. It has been continuously maintained and serviced. A new Yaskawa servo card was replaced two years ago at a cost of EUR 3,000. The machine has a new touchscreen, plus one additional spare touchscreen, and the keyboard has also been replaced. The spindle motor was completely refurbished two years ago. Tsdpo Ab Eu Dsfx Abuod

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. • Operating hours: 12,567 h • The machine is equipped with a 30-tool magazine, and it also includes a chip conveyor and tool cooling system. Todpfxsy Naacs Abuod Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2022, Technical details: turning diameter: 336 mm turning length: 216 mm weight of the machine ca.: 8,3 t Tjdpfszv Rgwex Abued Article: CNC multi-axis lathe Manufacturer: Hurco Model: TMX 8MYSi Year of manufacture: 2022 CNC multi-axis lathe Excerpt from manufacturer’s specifications: Working area: Max. turning diameter: 336 mm Max. swing diameter: 560 mm Main spindle specifications: Max. speed: 4,500 rpm Chuck diameter: 210 mm Tie-bar diameter: 64.5 mm Counter-spindle specifications: Max. speed: 6,000 rpm Tool turret with driven tools Bar-Loading Magazine: SAMSYS M3000 (2022 model) HYDAC Cooler The machine can be visited under power. The tool configuration included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Ultimax, workpiece length (max.): 1,500 mm, workpiece width (max.): 660 mm, workpiece weight (max.): 1,300 kg, table load: 1,300 kg, rotational speed (max.): 10,000 rpm, CNC milling machine Hurco VMX 50 | Year of manufacture: 2006 | SK40 | Chip conveyor | Spare parts For sale is a Hurco VMX 50 CNC milling machine / CNC machining center, manufactured in 2006, from our machine inventory. The machine is in a well-maintained and good condition. It is ideally suited for workshops, job shops, as well as training and production companies. Technical data: - Manufacturer: Hurco - Model: VMX 50 - Year of manufacture: 2006 - Control: Hurco Ultimax - Travels X / Y / Z: 1,270 / 660 / 610 mm - Table size: 1,500 × 660 mm - Table load: approx. 1,300 kg - Tool holder: SK40 - Spindle speed: up to 10,000 rpm, depending on the model - Rapid traverse X / Y / Z: 30 / 30 / 20 m/min - Tool changer: 20-position - Internal coolant system: included - Coolant system: included Tedpfx Absz Iri Isusd - Chip conveyor: included Equipment: - Chip conveyor included - Various spare parts included - LAN-capable via existing WR box - Coolant system included Sale & Handling The machine is sold ex works. Pickup only. Inspection and demonstration under power are possible upon request. Loading can be arranged after consultation. Price: net plus statutory VAT. If you are interested, have any questions, or would like to arrange an inspection, please contact us.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Hurco VMX 64, Year of manufacture: 2002, Control system: Ultimax 4, Tedpfx Absy T Iuveuod Travel range X/Y/Z: 1625/860/760 mm, Tool changer: 40-position, Spindle speed: up to 8,000 rpm, High-pressure coolant system, Chip conveyor system, Pocket with islands, DXF, Simultaneous threading, Ultinet, Workpiece positioning detection, Ramping/helix plunging, Advanced Velocity Control, Z-axis cover defective.

Condition: excellent (used), Year of construction: 2022, operating hours: 6,500 h, functionality: fully functional, overall weight: 4,710 kg, A wide range of accessories is included. Tsdez I Rigopfx Abujd

Condition: good (used), Year of construction: 2016, HURCO CNC Machining Centre VMX 24 i Travels X-axis (mm): 610 Y-axis (mm): 508 Z-axis (mm): 610 Main Spindle Spindle taper (DIN 69871): SK 40 Max. spindle speed (rpm): 12,000 Max. spindle power (kW): 9 Max. spindle torque (Nm): 95 Feed Rapid traverse X/Y/Z-axis (m/min): 38 / 38 / 32 Tool Changer Magazine positions / optional: 30 Max. tool diameter (mm): 80 Max. tool length (mm): 300 Max. tool weight (kg): 7 Additional Data Required installation space (mm) (doors open, incl. control unit and chip conveyor): 3,930 x 4,041 x 2,725 Machine weight (kg): 4,750 Coolant tank capacity (l): 367 Tedjxvtihepfx Abujd Scraper belt conveyor: Standard Technical specifications subject to change without prior notice.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,000 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WinMax / MAX5, table width: 508 mm, table length: 760 mm, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details. Tedpfxezc Rzio Abusd - Tool Holder: SK40 / CAT40- Max. Torque: 95 Nm- Max. Tool Diameter: 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 7 kg- Rapid Traverse X/Y: 38 m/min- Rapid Traverse Z: 32 m/min- Additional Equipment: Automatic centralized lubrication, Chip flushing system, Scraper belt conveyor, Coolant unit, Electronic handwheel, Network connection- Included in Delivery: CNC milling machine Hurco VMX 24i- Excluded Items: Vise, tools, clamping devices, other accessories

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 950 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,270 mm Travel Y-axis: 660 mm Travel Z-axis: 610 mm Table size: 1,500 x 660 mm Max. table load: 950 kg Spindle speed: 10,000 rpm Spindle taper: CAT 40 Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 20 m/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.0025 mm MACHINE DETAILS Tjdpfxoxxld Aj Abujd Weight: 9 t EQUIPMENT 24-position automatic tool changer (ATC) Standard cooling Various tools

Condition: used, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,020 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 40, Vertical Machining Center Tjdpfx Aezaf Ixebujd Manufacturer: HURCO Model: VMX 40 Technical Data: - X-axis travel: 1,020 mm - Y-axis travel: 510 mm - Z-axis travel: 610 mm - Table size: 1,020 x 610 mm - Spindle speed: 10,000 rpm - Spindle taper: SK 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 18,571 h, functionality: fully functional, controller model: WINMAX, table width: 510 mm, table length: 760 mm, number of axes: 5, TECHNICAL DETAILS Tsdexxlc Sspfx Abued Table size: 760 x 510 mm Tool changer: 24 positions MACHINE DETAILS Control: WINMAX Operating hours: 18,571 h EQUIPMENT Fully integrated 4th/5th axis Simultaneous milling 5th axis can be removed when not required

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller model: WinMax, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 762 mm Travel range, Y-axis: 508 mm Travel range, Z-axis: 610 mm Tedpjz Ahx Dsfx Abued Spindle speed: 12,000 rpm Table area: 1,020 × 510 mm Table load capacity: 1,500 kg MACHINE DETAILS Control system: WinMax EQUIPMENT Internal cooling system (ICS) Fourth axis

Condition: used, A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment. Tedoz Hzd Sspfx Abued

Condition: good (used), Year of construction: 2010, HURCO CNC Machining Center VMX 30 U with WinMax control Travel distances in mm: X-axis 1060 Y-axis 610 Z-axis 520 Integrated rotary and swivel axis: Coolant system Rinsing system to support chip removal Chip splash-guard enclosure Coolant spray gun Signal light for machine operating status Work area machine lamp Set of leveling pads Machine manual on CD includes: WinMax control 2 color screens (text + graphics) 2 software modules (1 x conversational programming at the machine + 1 x for ISO code programming via external programming device or CAD/CAM system Tjdpjxvtf Aefx Abujd through RS-232 C or V 24 interface)

Condition: like new (used), Year of construction: 2015, operating hours: 987 h, functionality: fully functional, travel distance X-axis: 1,524 mm, travel distance Y-axis: 661 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 30 kVA, controller manufacturer: HURCO, controller model: WinMax 5, total height: 3,010 mm, total length: 4,800 mm, total width: 2,300 mm, table width: 660 mm, table height: 1,000 mm, table length: 1,680 mm, table load: 2,000 kg, overall weight: 8,420 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 987 h, distance table center to spindle nose: 101,711 mm, spindle motor power: 18 W, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 80 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, This CNC HURCO VMX60i machining center has seen very little use and is in excellent working condition. With only 987 operating hours and 4,115 power-on hours, it represents an ideal solution for those seeking a reliable, ready-to-use machine with extremely limited usage compared to its age. Key features: Todpfezmfn Rsx Abujd * CNC Hurco WinMax / MAX 5 * X/Y/Z axis travels: 1524 x 661 x 610 mm * ISO40 spindle at 12,000 rpm * 18 kW spindle motor * 1680 × 660 mm table with a load capacity of 2,000 kg * 30-position chain-type tool magazine The price refers to the machine in the configuration described in the technical data sheet. Upon request, the following equipment can also be provided: * Fourth-axis table * Tailstock * Set of tool holders The supply of the equipment will be quoted separately based on the customer's needs. For over 30 years, Otto Machine has been selecting and marketing used machine tools in Italy and abroad. The machines can be viewed in our showroom or via video call. Contact us to receive the complete technical data sheet, photographs, videos, and all the information about the machine. We can arrange a visit to our showroom or a video call to view it remotely.

Condition: good (used), Year of construction: 2005, Hurco VMX 30, Year of manufacture 2005, Ultimax 4 control system, travel X/Y/Z 780/510/610 mm, 24-position tool changer, Todpfxsu Ib A Uj Abujd SK 40 holder, Table size 1020 x 510 mm, max. table load 1,000 kg, Spindle speed up to 10,000 rpm, spindle drive 11 KW, chip tray,

Condition: good (used), Year of construction: 2020, functionality: fully functional, turning diameter over cross slide: 402 mm, turning diameter: 295 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 750 mm, overall weight: 5,000 kg, We offer in good condition Hurco TMM10i with the Winmax V11 software machine has following options: X-Axis travel: 250 mm Z-Axis travel: 750 mm Driven tools VDI 40 4.000 RPM Machine weight 5.000 kg Machine can be inspected under power. Machine has following options: Renishaw tool arm Internal coolant 20 bar Tedpfozpfb Nsx Abued

Condition: used, Year of construction: 2001, functionality: unexamined, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,500 mm, total length: 2,200 mm, total width: 2,400 mm, table length: 760 mm, table width: 510 mm, table load: 1,000 kg, For sale is a 3-axis CNC milling machine from the Hurco brand and the type VMX 24 Technical data: - Year of manufacture: 2001 - Control: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. part weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Pull bolts, which can be seen in pictures, are not part of the offer Transport and loading can be organized throughout Europe on request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Tsdpfxsv Tcfko Abusd For more information or contact options, visit us on our website

Condition: good (used), Year of construction: 2011, Due to liquidation, this machine is now available. Condition: very good. Regularly maintained. Tsdpfx Aezzlqhobusd Immediately available. Hurco VMX24t incl. KITAGAWA rotary table Year of manufacture: 2011 Number of axes: 5 X-axis travel: 610 mm Y-axis travel: 510 mm Z-axis travel: 610 mm 24-position tool changer Electric handwheel Internal cooling system Winmax control

Condition: used, Year of construction: 2001, BAZ Hurco VMX 40, year 2001 for sale in very good condition. Todpfx Asy Nlpcjbujd

Condition: excellent (used), Year of construction: 2008, operating hours: 7,400 h, functionality: fully functional, Controller WINMAX Singlemax (one screen) Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories - Coolant unit Tjdpfxe Agag Rj Abusd - Chip conveyor - SW options: 3D, pocket islands, rigid tapping, DXF, NCPP, ISNC, select surface, advanced graphics, material and tool databank - machine mounths

Condition: used, Year of construction: 2020, operating hours: 13,674 h, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 640 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 4,211 h, spindle nose: SK 50, Horizontal Machining Center Manufacturer: HURCO Model: HMX 500 Ti Year of manufacture: 2020 Todpezbmzvefx Abusd Control system: Ultimax Technical specifications: - X-travel: 810 mm - Y-travel: 610 mm - Z-travel: 640 mm - B-axis: 360° - Spindle speed: 8,000 rpm - Drive power: 56 kW - Tool holder: SK 50 - Rapid traverse: 45/40/45 m/min - Power-on hours: approx. 13,674 h - Spindle hours: approx. 4,211 h Equipment & accessories: - Internal Coolant Supply (ICS) 40 bar - 2-station pallet changer (500 mm x 500 mm) with tombstone and zero-point clamping system (Quant) In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.