CNC Lathe

HURCO TMX 8MYSi

Condition: ready for operation (used), Year of construction: 2023, operating hours: 346 h, number of axes: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max turning diameter: 508 mm • Max turning length: 560 mm • Max part diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max driven tool speed: 5000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Main spindle max speed: 4500 rpm • Sub-spindle max speed: 6000 rpm • Synchronous spindle speed: 2500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar capacity: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Largest motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short circuit rating: 5 kA RMS symmetrical • Interrupt capacity: 10000 A Rodpjym T Itefx Abusch • Max ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7500 kg • Transport weight: 8250 kg • The BMT65 mounts are included; swivel mounts are not.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: NT2000, total height: 4,300 mm, total width: 3,300 mm, total length: 2,980 mm, load capacity per storage section: 250 kg, construction height: 435,000 mm, input voltage: 415 V, warranty duration: 12 months, load capacity: 250 kg, Equipment: documentation/manual, safety light barrier, Kardex 500 Shuttle NT2000 1 Available Rcjdpsrgqxmjfx Abuoh 415v 3 phase netural & Earth 16 amps into an isolator required Colour Blue & Grey Max load per tray 250Kg Number of trays 20 per machine Machine Dimensions 4300mm Height x 3300mm Width x 2980mm depth Tray Dimensions 3000mm width x 860mm depth Delivery, installation & 12 months warranty available Supply only available without warranty Service & Maintenance contracts available for these machines

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC lathe Okuma LB 3000 EX II-MY C 450 Control system: OSP-300LA Year of manufacture: 2018 Internal machine number: 77 Rcedpfx Aez D Tt Tebuoh Turning diameter over bed: 580 mm Turning diameter over slide: 470 mm Travel in X-axis: 260 mm Travel in Y-axis: 120 mm Travel in Z-axis: 510 mm Travel in C-axis: 360 mm Max. turning diameter: 340 mm Max. turning length: 450 mm Main spindle speed: 45 - 5,000 rpm Tool holder: BMT Tool turret: V12 (powered) Equipment: - Chip conveyor - One-touch IGF - Touch setter - Main spindle Kitagawa B210 - Coolant system

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, USED YAMAZAKI MAZAK HORIZONTAL MILLING AND TURNING CENTER INTEGREX J-200 X 500 with Smooth G CNC - 36-tool magazine package (500U) - 15 kW AC turning spindle power - B-axis with mechanical locking every 1° - 15 bar coolant through the milling spindle and onto the flange Rcedpfxsz Ihmpj Abujh - Lateral chip conveyor with belt (500U) - High/low pressure selection (requires opening/closing of the chucks with the spindle stopped) - Radio probing system - Renishaw RMP60 (complete system including probe and Mazatrol probing cycles, excluding the Renishaw "Inspection Plus" software) - SEI FILTRATION system - Tooling and mandrel kit Complete with operating manuals, CE certification, and standard accessories.

Condition: used, Year of construction: 2023, turning diameter 120 mm turning length 640 mm Rsdpfx Aey Nfdmjbuech control Fanuc 32iT total power requirement 45 kW weight of the machine ca. 8,5 t

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1100 mm Travel distance Y :560 mm Travel distance Z: 510 mm Number of axis: 3 milling machine / machining center Control: HEIDENHAIN TNC 620 spindle chuck: SK 40 / ISO 40 spindle revolutions: 12000 rpm Rsdpfx Aboz A Apusuech Speed range from: 20 U/min Speed range to: 12000 U/min table size X: 1400 mm table size Y: 560 mm max. workpiece weight: 1000 kg tool changer: 30 - time input Power : 13 kW Rapid traverse: 30 m/min spindle cooling chip conveyor control Heidenhain DMG MORI CMX 1100 V Year of manufacture: 2018 3-axis vertical machining center HEIDENHAIN TNC 620 control 12 bar high-pressure coolant system 30-position tool magazine 30 ISO 40 tool holders included Chip conveyor Electronic handwheel Machine is currently under power Demonstration under power possible by appointment

Condition: ready for operation (used), Year of construction: 2025, operating hours: 1,351 h, controller manufacturer: FANUC, controller model: i Series iPlus, This 6-axis DN Solutions DNX 2100S Advanced was manufactured in 2025. It features a FANUC i-Series control, a 6-axis configuration including B and C axes, and a tool magazine with 60 positions. The machine offers full turn-mill capabilities, through-spindle coolant up to 70 bar, and a Renishaw probing system. Consider the opportunity to buy this DN Solutions DNX 2100S turn-mill centre. Contact us for more information about this machine. • Axes Configuration: 6 axes (X, Y, Z, B, C1, C2) • B-axis milling spindle (indexing accuracy 0.0001°) Rsdpfxszv Ruuj Abujch • Milling/Main Spindle: • Tool Interface: HSK-C63 • Max Speed: 12000 rpm • Power: 18.5 / 15 kW • Max Torque: 58 Nm • B-axis Travel: 240° (±120°) • Left Spindle: • Chuck Size: Ø255 mm (10") • Max Speed: 4000 rpm • Power: 22 / 15 kW • Max Torque: 456 Nm • Right (Sub) Spindle: • Chuck Size: Ø210 mm (8") • Max Speed: 5000 rpm • Power: 18.5 / 15 kW • Max Torque: 326 Nm • Tool Magazine: 60 positions • Features: Driven tools, Full turn-mill capability • Through-Spindle Coolant: 70 bar • Programmable Coolant Pressure (7 steps) • Coolant Through Opposite Spindle • Oil Skimmer • Chuck Washing • Work Area Washing: 4.5 bar • Coolant Level and Pressure Monitoring • Oil Mist Collector Preparation • Hinged Belt Chip Conveyor • Renishaw Probing System (Measuring Head Included) • Automatic Tool Measurement • Radio Tool Measurement System RMP60 • Manual Pulse Generator (MPG) • 3-Color Signal Tower

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. Rsdpszcpu Iofx Abujch The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: ready for operation (used), Offered is a used high-precision Studer S35 CNC cylindrical grinding machine. Center distance: 1000mm, center height: 175mm, swing diameter max. approx. 350mm, workpiece weight: approx. 80kg, resolution: measuring systems glass scales range 0.0001mm 0.1µm. Inspection by appointment possible. Rsdpfxeykuuce Abuech

Condition: reconditioned (used), Year of construction: 2008, operating hours: 13,600 h, functionality: fully functional, machine/vehicle number: 106, Machine partially overhauled by Willemin with new geometry and a new secondary spindle (6,000 rpm). New ball screws on X-Y-Z axes. Alignment and calibration. Ready for production. 5 axes – Fanuc 31i A5 – HSK40E – max 30,000 rpm – Year 2008. Country of manufacture: Switzerland Voltage: 3x400V / 60Hz; 50 A; 35 kVA Dimensions: 270x200x260 cm Net machine weight: 2,500 kg TECHNICAL SPECIFICATIONS WILLEMIN MACODEL 508 MT Control: Fanuc 31i A5 X axis: 450 mm Y axis: 200 mm Z axis: 425 mm B axis: -45° to +100° U axis: 300 mm Tool magazine: 48 PickUp stations Main spindle A: max Ø42 mm, max 6,000 rpm Main spindle C: max Ø42 mm, max 3,000 rpm Milling motor spindle: HSK40E, max 30,000 rpm Rodpfx Abew T Tlrousch All technical details are given without obligation and subject to errors or omissions.