Used Hydraulic Hose Press for sale (25,589)

Condition: used, Single-column hydraulic press MAE type S63SZ SO . 551277 Year of manufacture approx. 1977 Nominal pressing force: 63 tons Pressing force: 50 tons (practically tested) Cededzp Trepfx Aa Nepw Throat depth: 320 mm Table area: 850 x 630 mm Ram area: 1050 x 500 mm Ram stroke: 500 mm Max. installation height: approx. 730 mm Table height above floor: 970 mm Hydraulic tank capacity: 600 liters Drive power: 15 kW Power supply: 380 Volt, 50 Hz - Hydraulic draw cushion below the table with bores through the tabletop - Two-hand operation - Electrical control cabinet damaged Required space (L x W x H): 2000 x 1200 x 3420 mm Weight approx. 5 tons The machine is operational, the control cabinet is mechanically damaged. During test run, the machine achieves a pressing force of 50 tons, presumably a pressure relief valve is venting.

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 Codpfx Aajdzp Tce Nepw pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Spreading and pressing device with hydraulic unit WEBER type E45 / 59600.0 High-pressure unit + hydraulic spreader pliers, hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic unit type E45 / 59600.0 Maximum operating pressure: 630 bar Cpodpfx Ajdzp S Rsa New Flow rate: approx. 2 l/min Tank capacity: approx. 10 liters Spreader device - pliers WEBER type SP30 / 059 198.0 Reach (arm length): 340 mm Maximum spread distance: 810 mm Maximum spreading force in working range: 132 kN Closing force: 99 kN - Twin hose with quick-connect coupling Rated power: 0.9 kW Power supply: 220 Volt, 50 Hz Weight of hydraulic unit: approx. 40 kg Weight of spreader device: approx. 25 kg Very good condition Hydraulic rescue set for fire brigades with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart structures. Also suitable for compressing or lifting loads. Versatile in use due to the multifunctional design of the spreader jaws, made of drop-forged and hardened steel.

Condition: used, Year of construction: 1990, pressure 100 t table surface area 800 x 800 mm ram stroke 450 mm throat 400 mm dayligth 800 mm table height over floor 900 mm die cushion capacity 40 t die cushion stroke 200 mm oil volume 700 l Cjdpfeyif Nrex Aa Nepw rapid traverse - down 185 mm/sec rapid traverse - up 160 mm/sec working feed 55 mm/sec total power requirement 17 kW weight of the machine ca. 5 t dimensions of the machine ca. 2,2 x 1,2 x 3,4 m Machine has cushion in table.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, bending force (max.): 40 t, Hydraulic Press Brake, PB-H12540. As a dealer of MAC Bending in Europe, we offer the MAC Bending 12540: a high-quality press brake with a bending length of 1250 mm and a capacity of 40 tons. This machine combines a robust construction with high precision and repeatability. Thanks to its compact design, the 12540 is ideal for workshops where efficiency and optimal use of space are important. Suitable for bending steel, stainless steel, and other materials in both single pieces and series production. The MAC Bending 12540 stands for reliability, user-friendliness, and excellent value for money. Contact us for more information or a quote. The sturdy construction ensures stability and durability, while the easy-to-use controls guarantee high reproducibility and flexibility. Ideal for metal fabricators seeking reliability, precision, and a favorable price-performance ratio. Key features: Bending length: 1250 mm Press force: 40 tons Compact design, suitable for smaller production areas High accuracy and consistent bending quality Suitable for various sheet thicknesses and materials Easy operation and low maintenance requirement Supplied including knives/tooling Optionally available with WILA tooling Cedpfx Asyaq Tyja Nspw Alternative tooling possible on request

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Cpodpfsyabf Hjx Aa Njw

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Cpsdpfjyq R D Hjx Aa Njw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, bending force (max.): 230 t, throat depth: 300 mm, distance between stands: 4,050 mm, back gauge: 600 mm, working length: 5,000 mm, TECHNICAL DETAILS Pressing force: 230 t Bending length: 5,000 mm Distance between uprights: 4,050 mm Csdpeyg D Abefx Aa Nspw Installation height: 800 mm Ram stroke: 500 mm Throat depth: 300 mm Backgauge: 600 mm Control: BC 45 Graphic MACHINE DETAILS Total power requirement: 18.7 kW Machine weight: approx. 22.0 t Space required: approx. 6.0 x 2.2 x 3.75 m EQUIPMENT 4 backgauge fingers Crowning device Manual finger height adjustment via crank 140 mm Front groove in the table Various tools

Condition: ready for operation (used), functionality: fully functional, bending force (max.): 200 t, stroke length: 250 mm, throat depth: 315 mm, distance between stands: 3,650 mm, working length: 4,050 mm, The machine's control unit has been renewed! TECHNICAL DETAILS Pressing force: 200 t Bending length: 4,050 mm Frame width: 3,650 mm Stroke: 250 mm Throat depth: 315 mm Maximum tool width: 100 mm Table width: 190 mm Table height above floor: 800 mm Cjdpfx Aajyg Dtme Nspw Rapid traverse: 100 mm/s Working speed: 8 mm/s Return speed: 75 mm/s MACHINE DETAILS Control system: CYBELEC CybTouch 12 Total power requirement: 18.5 kW Current consumption: 25 A Protection: 50 A Tank capacity: 240 l Dimensions & Weight Space requirement: approx. 4.4 x 1.8 x 3.0 m Machine weight: approx. 17 t EQUIPMENT Swiveling operator panel, front right CNC electric backgauge (X axis) CNC electric depth adjustment (Y1 + Y2 axis) 4x manually adjustable, flip-up backgauge fingers Manually adjustable table crowning, via hand crank Rear and side safety guards 3x front support arms Free-moving double foot switch Universal die block

Condition: new, functionality: fully functional, throat depth: 225 mm, pressing force: 28 t, table width: 300 mm, table length: 325 mm, stroke length: 150 mm, TECHNICAL DETAILS Pressing force: 28.0 t Throat depth: 225 mm Cpjdpeyg Dr Ajfx Aa Nsw Stroke: 150 mm Table size: 325 x 300 mm Working speed: 2.0 - 9.8 mm/s Return speed: 12.8 mm/s MACHINE DETAILS Total power requirement: 4.0 kW Dimensions & Weight Space required: approx. 1,800 x 900 x 2,000 mm Machine weight: approx. 650 kg EQUIPMENT NC control for adjusting the ram stroke Selector switch for manual or semi-automatic operation Flow control and pressure relief valve Integrated pressure gauge Various tools can be mounted on the ram; there is a 40 mm hole inside for securing the tools.

Condition: excellent (used), functionality: fully functional, installation height: 500 mm, pressing force: 120 t, table width: 600 mm, table length: 1,000 mm, operating speed: 59 mm/s, overall weight: 6,000 kg, reverse speed: 180 mm/s, distance table to ram: 800 mm, clearance between the columns: 850 mm, stroke length: 300 mm, operating pressure: 290 bar, pressing speed: 11 mm/s, Used hydraulic press (120t) in good and fully functional condition with modern electrical system. The press is mounted on rollers, allowing for flexible use as a mobile unit. Cpodpjylk Eaefx Aa Njw

Condition: ready for operation (used), functionality: fully functional, controller model: Cybelec CypTouch 12 - 3 Achsen, bending force (max.): 125 t, stroke length: 250 mm, table height: 900 mm, working length: 3,550 mm, The machine control has been renewed! TECHNICAL DETAILS Pressure: 125 t Bending length: 3,550 mm Frame distance: 3,050 mm Stroke: 250 mm Throat depth: 320 mm Table width: 120 mm Table height: 900 mm Return speed: 100 mm/s Working speed: 10 mm/s MACHINE DETAILS Cjdpfx Ajygxk Tsa Nspw Control (renewed): Cybelec CypTouch 12 – 3 axes Oil volume: approx. 250 l Total power requirement: 11 kW Dimensions & Weight Space requirement: approx. 4 x 2 x 3 m Machine weight: approx. 11 t EQUIPMENT Hydraulic tool clamping Crowning system Swivelling operator control panel, front right Free-moving foot pedal Side safety guard (safety grille) Rear safety guard (safety grille)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 22613, bending force (max.): 200 t, stroke length: 400 mm, throat depth: 300 mm, distance between stands: 2,750 mm, working length: 3,100 mm, TECHNICAL DETAILS Press force: 200 t Bending length: 3,100 mm Frame gap: 2,750 mm Stroke: 400 mm Throat depth: 300 mm MACHINE DETAILS Control: CYBELEC DNC7000 Total power requirement: 18.5 kW Oil capacity: 330 l Suitability: Suitable only for thin sheet metal Dimensions & Weight Space requirement: approx. 4,300 x 2,400 x 3,600 mm Machine weight: approx. 18,500 kg EQUIPMENT Electric backgauge (X-axis) CNC crowning 4x controlled backgauge fingers 2x front support arms with SLIDING SYSTEM Hydraulic upper and lower tool clamping Side and rear safety guards Tools (3 cabinets) Foot switch Csdpfx Aajygw Azj Nopw Operating manual

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, stroke length: 240 mm, throat depth: 300 mm, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Machine weight: approx. 15 t EQUIPMENT CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling Cpodeygw Ahspfx Aa Now 2x front sheet supports Side and rear safety guards Operating manual

Condition: ready for operation (used), Year of construction: 1992, Available immediately from location: Edelhoff Hydraulic Single Column Press Type HEP 45 Year of manufacture 1992 Machine complies with the latest accident prevention regulations Pressure capacity 45 tons Table 1000 x 1000 mm Stroke 300 mm Drive 7.5 kW Csdpoyl T Ttsfx Aa Njpw Weight 6 tons Price: €5,000 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1968, Immediately available ex site: Hydraulic press brake Lotze Type P 100 – 3.5 Year of manufacture: 1968 Press force: 100 t Working length: 3500 mm Frame opening: 3050 mm Stroke: 315 mm Throat depth: 200 mm Drive: 11 kW Cpedpfx Aaoyl T Tmo New Complete set of upper and lower tooling Weight: 8 t Price: EUR 4,000—plus VAT, ex site

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Cedpfovvkmbsx Aa Nepw

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation Csdjv Srfwjpfx Aa Nepw - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: new, Year of construction: 2025, pressure 100 t Cpodpfx Aexu Nv Iea Njw stroke 380 mm table surface area 1100x424 mm dayligth 180/750 mm distance between columns 1100 mm diameter of piston 90 mm

Condition: new, Year of construction: 2025, pressure 060 t stroke 350 mm table surface area 750x344 mm dayligth 197/750 mm Codpfxexu Nvze Aa Nopw distance between columns 750 mm diameter of piston 75 mm

Condition: used, Year of construction: 1990, pressure 63 t stroke 250 mm throat 280 mm dayligth 400 mm table surface area 650 x 520 mm table height over floor 830 mm ram surface 500 x 390 mm Cpedpfeylzzfex Aa New feed down 100 mm/s feed up 465 mm/s working feed 25 mm/s oil volume 650 l power requirement 24,0 kW Weight 4,8 t dimensions of the machine ca. 1,5 x 1,9 x 3,4 mxmxm SPECIAL DEAL as is where is - as spare parts dispenser WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1986, pressure 63 t stroke 160 mm throat 270 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 850 mm ram surface 450 x 360 mm oil volume 360 l power requirement 23,0 kW Weight 4,60 t dimensions of the machine ca. 1,2 x 1,8 x 2,9 mxmxm hole in the table 280 x 190 mm SPECIAL DEAL as is where is, electrical control defective WITHOUT putting into operation / WITHOUT additional work Cpjdpfsylzwgex Aa New free loaded to truck

Condition: used, Year of construction: 1990, pressure 160 t stroke 200 mm throat 500 mm dayligth 500 mm table surface area 1140 x 980 mm table height over floor 860 mm ram surface 1000 x 800 mm oil volume 1000 l power requirement 50,0 kW Weight 18,0 t Cpjdpfx Aowvva Sja Nsw dimensions of the machine ca. 1,3 x 2,6 x 3,4 mxmxm hole in the table 180 mm yom 1981 - modernization 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1985, pressure 40 t stroke 500 mm throat 360 mm dayligth 1000 mm Cpodjvzxrpepfx Aa Njw table surface area 630 x 500 mm table height over floor 1060 / 720 mm ram surface 450 x 360 mm feed down 60 mm/s feed up 300 mm/s power requirement 7,5 kW Weight 2,75 t dimensions of the machine ca. 1,0 x 1,8 x 3,05 mxmxm hole in the table 200 mm permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oil-hydraulic drive, intermediate plate (height 340 mm) as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm Cedpsvuucksfx Aa Nopw dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation press can be inspected in running condition in our warehouse