Used In-House Exhibition for sale (17,583)

Condition: used, This listing is for theC Technologies IN-VPE-Flows Flowpipe Kdjdpfxexhfquj Acpsu The unit is in full working condition and is ready for immediate use 1. CTech™ FlowVPE or FlowVPX Systems These are variable pathlength UV–Vis spectrophotometer systems designed for inline process monitoring in bioprocessing. The FlowVPE System is built for flexible measurement configurations and lab-to-manufacturing scalability, while the FlowVPX System is tailored for GMP environments with compliance capabilities

Condition: used, Year of construction: 2011, Used Equipment Year of Manufacture: 2011 Condition: Currently installed Equipment and Technical Data: -Filter housing base ring NFHSU 9/9 with discharge chute for press - Discharge: 1.1 kW - Storage volume in the base ring approx.: 3.25 m³ - Dimensions L x W x H (incl. base ring) 2440 x 2440 x 900 mm - Ground clearance: 350 mm - Conveyor screw for briquetting press 0.75 kW - Extension and expansion rings are optional; max. storage volume approx. 12 m³ - Extension and injection ring NFHSU for 9/9 and 10/10 Jet, L x W x H: 2480 x 2480 x 500 mm - Expansion ring for NFHSU 9/9, 2480x2480x700 mm, with inspection door and type-tested explosion flap - Filter for filter housing NFHSU 9/9/20, filter area 116 m²: The Nestro filter system NFHSU is a solid filter construction made of 4 mm galvanized steel sheet and is designed for outdoor installation and weather resistance. This filter system is particularly robust and designed for underpressure operation up to -3,500 Pa. The filter system is equipped with upper and lower inspection doors 600 x 600 mm, with automatic filter regeneration, dry extinguishing system, differential pressure switch / volumetric flow monitoring and the necessary explosion protection. Note: Filter is equipped with high-quality filter material, BIA category M, antistatic, residual dust content < 0.1 mg/m³ and suitable for return air operation. Further technical data: - Filter tube length: 2,000 mm - Filter tube diameter: 230 mm - Number of filter tubes: 81 - Filter area: 116.0 m² - Filter regeneration: automatic/motorized - Number of vibrating motors: 4 pcs - Fan shroud for NFHSU 9/9 including inspection door - Fan US-FHN (clean gas) 22 kW 16,400 m³/h - 3,200 Pa: A Nestro high-performance fan with above-average efficiency and high energy saving potential when using a frequency inverter (optional). The robust welded construction is primed and painted in RAL 5015. The fan is delivered as standard with an inlet cone and backflow damper. Technical data at a glance: - Volumetric flow: 16,400 m³/h - Corresponding underpressure: 3,200 Pa - Electric motor: 22 kW / 400 Volt / 50 Hz - Speed: 3,000 rpm - Design: B5 - Pressure nozzle: without - Application area: Nestro underpressure filter and others - Injection nozzle d= 400 mm with flange ring - Injection nozzle d= 350 mm with flange ring - Backflow damper d= 350 mm with flange edge - Backflow damper d= 400 mm with flange edge - Briquetting press C150; 30 - 50 kg/h, hydraulic unit 5.5: Technical data: - Power consumption (hydraulics): 5.5 kW - Briquette diameter: 50 mm - Weight: 650 kg - Briquetting performance with a bulk density of approx. 250 kg/m³, material-dependent: 30 - 50 kg/h - Ground clearance with base frame (art. no. 710300): 350 mm - Briquetting press, dust-proof Kjdpfx Acezvz Tbspjdu - Briquetting press complete with hydraulic solenoid valve control for automatic operation, oil tank with 100 l oil, in welded construction, including main cylinder, stuffing cylinder, gripper cylinder, pressing jaw, electrical control panel with fully automatic control and 5 m cable The press is standardly equipped with: Monitoring switch for oil temperature, hardened press bushing, connection part for briquette line and automatic briquette length adjustment

Condition: defective spare-parts repository (used), Stainless steel housing for a vacuum furnace with a heating chamber made of molybdenum. Chamber size: 600 mm x 600 mm x 900 mm Internal diameter of the working chamber: 1,000 mm External diameter of the working chamber: 1,280 mm External diameter of the vessel (without flange): 1,450 mm Height without wooden pallet: 1,900 mm Height with wooden pallet: 2,100 mm Width: 1,900 mm Length: 1,900 mm Kdodpfx Acsvrh Iuopou Weight with wooden pallet: 1,750 kg Inspection by appointment is possible at any time.

Condition: new, Clean air dust collector AL-KO POWER UNIT 350 PLUS P-FU -Exhibition machine- Start-up with frequency converter, Pressure transmitter for demand-based control ----- Technical Data ----- Suction nozzle diameter: 355 mm, Nominal volume flow: 7,127 m³/h, Maximum volume flow: 10,000 m³/h, Maximum vacuum: 3,347 Pa, Filter area: 73 m², Kdodj Aaz S Aepfx Acpou Chip collection volume: 3 x 250 liters, Number of bags: 3 pieces, Motor 400 V: 15.0 kW, Dimensions (L x W x H): 3,320 x 1,058 x 2,361 mm, Sound pressure level: 73 dB(A), Weight: 1,064 kg, According to: GS - HO - new exhibition machine -

Condition: used, Bag filter housing – 2 size #2 bags – stainless steel 304 Number of bags 2 Bag size #2 Kdsdpfx Acez N Eu Ispeu Material Stainless steel 304 Housing dimension D (mm) 426 Height H (mm) 1580 Max. working pressure (bar) 8 Design pressure (bar) 10 Max. working temperature (°C) 130 Inlet/outlet DN65 flange Seal Silicone Surface Sandblasted Data source Individual drawing Dimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304; the drawing also applies geometrically where its title block specifies a different material.

Condition: used, Bag filter housing – 1 size #2 bag – stainless steel 304 Kdodpfx Ajz N Euuscpou Number of bags 1 Bag size #2 Material Stainless steel 304 Housing dimension D (mm) 204 × 2 Height H (mm) approx. 1405 Max. working pressure (bar) 6 Design pressure (bar) 8 Max. working temperature (°C) 100 Inlet/outlet 1½″ Quick Chuck Seal Silicone Surface Polished Data source Individual drawing Dimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304; the drawing also applies geometrically where its title block specifies a different material.

Condition: used, Bag filter housing – 4 size #2 bags – stainless steel 304 Number of bags 4 Bag size #2 Kdodpfx Asz N Evfscpsu Material Stainless steel 304 Housing dimension D (mm) 530 Height H (mm) approx. 1741 Max. working pressure (bar) 6 Design pressure (bar) 8 Max. working temperature (°C) 80 Inlet/outlet Ø108 flange Seal Silicone Surface Mirror polished Data source Individual drawing Dimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304; the drawing also applies geometrically where its title block specifies a different material.

Condition: used, Bag filter housing – 3 size #2 bags – stainless steel 304 Number of bags 3 Bag size #2 Material Stainless steel 304 Housing dimension D (mm) 450 ±3 Height H (mm) 1800 +3/−1 Max. working pressure (bar) 6 Design pressure (bar) 8 Max. working temperature (°C) 80 Kdedpfsz N Tafex Acpou Inlet/outlet TC50 Tri-Clamp Seal Viton Surface Sandblasted Data source Individual drawing Dimensions and operating limits follow the assigned technical drawing. The offered material is stainless steel 304; the drawing also applies geometrically where its title block specifies a different material.

Condition: used, Year of construction: 1993, offered without plates. Plates maximum: 100 Ksdpfxsz R Dimj Acpsdu Plate formats: 600x600 Platefilter features: Electric-Hydraulic press dimension ca. 380x80x120 cm Distance between first plate and spindle approx ca. 180cm

Condition: used, mileage: 29,065 km, power: 88 kW (119.65 HP), first registration: 06/1976, fuel type: diesel, tire size: 12/50 R20, axle configuration: 4x4, wheelbase: 3,500 mm, fuel: diesel, color: red, driver cabin: day cab, gearing type: mechanical, number of gears: 6, Year of construction: 1976, Equipment: power assisted steering, trailer coupling, = Additional options and accessories = - Tachometer = Further information = Kjdpfx Aovcqbrocpodu Technical information Number of cylinders: 6 Engine displacement: 5,675 cc Front tyre size: 12/50 R20 Weights Unladen weight: 4,423 kg Payload: 2,327 kg Gross vehicle weight: 6,750 kg Interior Interior colour: black Environment Emission class: Euro 0 Maintenance, history and condition APK (Main technical inspection): New TÜV upon delivery Number of keys: 2

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Kdedjz Snchspfx Acpeu Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: used, Year of construction: 2022, functionality: unexamined, 23 complete containerised pellet boiler houses for sale – 13 × Ba-120 (120 kW) and 10 × Pereko KSR 130 (130 kW), 2.86 MW in total. Price is per unit; volume pricing for 5+ units and for the complete lot of 23. Each unit is a self-contained mobile heat plant: boiler, burners, buffer tanks, plate heat exchanger, flue system and 12 m³ pellet silo in one insulated heavy-duty container. Crane it in, connect flow/return, heat on – no boiler room, no construction. BOILER - Ba-120: 120 kW, 70/90 °C, heats approx. 2,180 m² / 5,450 m³ - Pereko KSR 130: 130 kW, 57/95 °C, heats approx. 2,360 m² / 5,900 m³ - Both: 2 × ECOMAT 70 pellet burners (agro pellets / sunflower husk capable, up to 98 % combustion efficiency), turbulators in fire-tube heat exchanger, max. 1.5 bar, flue 300×300 mm, G3 connection, 230 V / 500 W, power modulation 90 % - EN 303-5:2012 (MSZ EN 303-5:2013) STANDARD PACKAGE (every unit) - Heat buffer: 2 × 1,000 L insulated (Hajdu PT1000) - Expansion: 3 × 200 L pressure vessels - Heat exchanger: APV / SPX TR1-MV-16I/2 plate HX, 140 kW, 10 bar Kjdpfxsz Iy Ilj Acpodu - Flue: hot-gas induced-draught fan 450 m³/h / 800 Pa, vortex-tube cyclone separator (92 %), insulated acid-resistant modular chimney, draught monitoring - Fuel: 12 m³ external double-insulated pellet silo + screw feeder to internal day hopper - Ash: Ø100 mm geared ash screw to closed external bin - Controls: manual / automatic mode, control cabinet with PC, remote monitoring & fault alerts via internet, heat meter - Container: 6 × 2.5 × 2.5 m internal, PIR sandwich panels U = 0.4 W/m²K, 6 t steel floor, crane lugs, security lock, 0.9 × 2.1 m door CONDITION Pre-owned, complete, in storage since 2022. Sold as is, where is. Inspection by appointment in Hungary. Transport and recommissioning can be arranged. Ideal for schools, clinics, municipal buildings, farms, greenhouses, worker camps and emergency / temporary district heating. Full technical documentation in English and Ukrainian available on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 2,400 h, load capacity: 2,500 kg, lifting height: 2,970 mm, free lift: 150 mm, fuel type: gas, mast type: duplex, construction height: 2,170 mm, gearing type: other, tire condition: 60 %, overall weight: 4,200 kg, Equipment: 4th hydraulic function, cabin, clamp, lighting, STILL RX 70-25T in very good condition with low operating hours. Equipment: Kdedoz Rlv Ispfx Acpeu Load capacity: 2,500 kg Standard lifting mast Lifting height: 2970 mm Free lift: 150 mm Overall height: 2170 mm Full cabin with heating Single-pedal control Additional hydraulics for 2 functions / 4 valves Kaup clamp fork 1.5T411 with an opening range of 550 mm - 1700 mm 3 LED work lights Superelastic tires The muffler was replaced in 2025. A test drive or inspection can be arranged at any time. Transport can be organized for an additional charge.

Year of construction: 2014, condition: excellent (used), 328 USED MIWE Roll In 60/80 rotary cart oven. Year of manufacture: 2014. EXTERNAL DIMENSIONS (in cm): - W: 155, - D: 160 (with hood: 230) - H: 257. The price is a net price. Kdodpoyqnq Dofx Acpju Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Includes 6 heating fans. Kdsdpfezyc Dijx Acpeu Details available upon request.

Condition: excellent (used), mileage: 571,992 km, power: 184 kW (250.17 HP), first registration: 04/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 7,280 mm, loading space width: 2,440 mm, loading space height: 2,490 mm, Equipment: ABS, AdBlue, central locking, power mirror, spoiler, tail-lift, = Additional options and accessories = - Radio/CD player - Roof Spoiler - Side door - Sun visor - Tailgate = More information = General information Number of doors: 2 Year of construction: 2015 Cab: single Registration number: 1FYP557 Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Front axle: Steering Rear axle: Double wheels Weights Empty weight: 7.540 kg Carrying capacity: 4.460 kg GVW: 12.000 kg Functional Tail lift: dhollandia DHLM 20, tail lift, 1500 kg Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Kdjdsz Sunpepfx Acpsu Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2009, DCE filter box extraction system 12 m² filter surface area Kdjdpfexc Etfsx Acpsu without fan See our other listings VMA Wekerom

Condition: excellent (used), Silverson 275 LS High Sheer In Line Mixer / Homogenizer 1.5" Inlet & Outlet 3 ~ Removed from the stores of a pharma plant in Cork, Ireland. Device is in excellent condition. Kdsdpfxeym Akke Acpeu

Condition: new, Year of construction: 2010 Kedpsz A D Apofx Acpedu

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D Kdodpfxsr Ix Igs Acpsu 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Delivery on a Euro pallet, FOB Wuppertal

Condition: good (used), functionality: fully functional, empty load weight: 8,760 kg, maximum load weight: 25,240 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2022, loading space volume: 92 m³, suspension: air, tire size: 385/65 R22.5, Year of construction: 2022, Equipment: ABS, SCHWARZMÜLLER - WALKING FLOOR STEEL FLOOR! 4 units available! Brand: SCHWARZMÜLLER Model: J-Series S1 First registration: 03.2022 Unladen weight: 8,760 kg Payload: 25,240 kg Gross weight: 34,000 kg Technically permissible total weight: 39,000 kg - Robust and wear-resistant L-shaped steel floor profiles - STEEL FLOOR - ALUMINIUM chassis - Volume: approx. 92 m³ - Reinforced walls, continuous aluminium wear plates along the interior sides - Aluminium body - Portal doors - ABS/EBS Kedpfxjym En Sj Acpjdu - SAF axles - Lift axle - Disc brakes - Air suspension - Sliding roof tarpaulin - Standing platform at front wall - Hydraulic lifting and lowering system - Radio remote control - Toolbox - Underrun protection - Spare wheel holder - Tyres: 385/65 R22.5; tread approx. 70% / 80% / 90% - etc. Would you like to visit us? We offer a free pick-up service from Linz train station (4020 Linz). We handle all customs formalities for you. Want to trade in your current vehicle? If we reach an agreement, we are happy to accept your trade-in. This offer is non-binding and subject to prior sale. Errors and interim sale excepted.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, 1. Currently, everything is designed exclusively for use with Inarca connectors/housings. To use other connectors that are not physically identical to Inarca versions, conversion is necessary (the Komax team is most familiar with this). 2. Double crimping is not possible; only single crimping is supported. 3. The ZETA 633/654 machine is equipped with 4 presses. The ZETA 633/656 machine has 3 presses (refer to the PP image from the first email). 4. The Zeta 654 machine features automatic sleeve insertion on the fastons. This is possible for 6.3 and 4.8 terminals. Kdedpfx Acsy Nfm Ispeu 5. The system can be adapted for different connector pole counts. We used connectors with various pole configurations (2P, 3P, 4P, 7P, 8P), depending on the customer’s requirements. On the 654 machine, connector feeding into the machine is automatic via a vibratory feeder. On the 656 machine, connectors are manually placed onto a pallet (one is inserted, the other pallet is in the stack and conductors are automatically inserted). 6. The presses are “smart” and automatically adjust the clamping height to the conductor. 7. The machines do not have an injection molding unit. 8. In practice, the maximum processed length has been 1,500 mm. According to technical specifications, even longer lengths are possible (see technical data below for each machine). 9. On the Zeta 656, connectors can be crimped on both ends of the conductors. On the Zeta 654, this is only possible on one end (see image below).

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 5,000 rpm, Features - SF4-1: - Bed and tables made of cast iron with high precision - The cutter shaft is mounted in a rigid cast iron saddle Technical Specifications - SF4-1: The width of the workpiece being processed is max. 400 mm The length of the workpiece is min. 410 mm The maximum thickness of the removable layer is 6 mm Length of the tables: front 1504, rear 1004 mm The width of the tables is 410 mm The inclination of the side guide is 0 - 45 degrees Table lifting height: front 6, rear 2 mm The diameter of the cutter shaft is 125 mm The number of cutters on the shaft is 2 The shaft rotation frequency is 5000/min Motor power 2.8 kW The diameter of the chip extraction nozzle is 175 mm The extraction capacity is 1600 cubic meters per hour Kdsdsy S Aplspfx Acpsu Weight 620 kg Price 1800€ gross, ex works Werdau

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: VD 07.08.469, type of input current: DC, We are selling our Kallfass shrink tunnel. The display is defective, but the rest of the machine is fully functional. Kdedpfx Ajy Snw Ijcpeu Feel free to call if you have any questions.

Condition: new, Edge banding machine HOLZ-HER 1308 XL AURIGA POWER -Exhibition machine- New: GLUJET GJ725 This offer includes an equipment package. The following items and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Joiner milling unit FG201 with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feeder 1903 - Glu Jet GJ725 NC PUR PRO adhesive application system - Press unit 1912-3 pneumatic - Trimming unit 1918 pneumatic 60 mm - Multifunction milling unit FR301 MOT6 - Diamond cutter Ø 56/60 mm, R 2, left-hand rotation - Diamond cutter Ø 56/60 mm, R 2, right-hand rotation - Corner copying unit FF301 MOT1 - Scraping blade unit ZK301 MOT4 incl. high-gloss package - Tungsten carbide inserts for scraping blade carrier Kjdpfxju R Sy As Acpodu - Chip collection box for scraping blade unit - Buffing unit 1940 - Spray device TR301 for the infeed and outfeed area - Motorized adjustment of the pressure beam - iTronic adaptive pressure and adhesive quantity control - Infeed fence long 1,252 mm - Motorized adjustment of the infeed fence - Press unit DW301 with motorized NC axis - Extraction hoods for trimming unit 1918 - Shelving program - Surface scraping blade FK701 - Spray device GM301 after the press unit - new exhibition machine -