Used Infrared Paint Dryer for sale (6,054)

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Hnedpfx Aioyb Rpdorst The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Year of construction: 2000, condition: good (used), functionality: fully functional, The system is suitable for the accelerated drying of painted components, which are transported through the dryer on trolleys with a chain conveyor. The dryer has a total length of approx. 20m and is equipped with a high-speed door on both sides. Maximum component length is approx. 5m. The heating medium is hot water 90°/70°C. The plant can currently still be viewed in operation. Hedpjvi Hdvofx Airjnt

Condition: ready for operation (used), machine/vehicle number: 89915, Drive system = compressed air, Material/air ratio = 16:1, Maximum material pressure = 90 bar, Air inlet pressure = 1 to 6 bar, 4 double strokes per 1 liter of material, with MX type spray gun with double hose, unused since the last maintenance in 01/20, Hjdpfeiv Huwox Airjnt Condition as inspected, Ex works, from warehouse Seevetal, subject to prior sale.

Condition: good (used), Year of construction: 2011, Refrigerant dryer Hedpfjzvqwcsx Airsnt Manufacturer: Atlas Copco Type: FD150 Year of manufacture: 2011 Power: 1 kW Volumetric flow rate: 9 m³/min

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW Hnedpfx Aiszg Dx Ujrst - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Year of construction: 2009, condition: good (used), For Sale: Make: Kittner Type: Crate washing machine + dryer Automatic feed Included: - Crate washer + dryer - Electrical diagrams Hedpfx Aoznhwqoirjnt The crate washer is adjustable in height and width. Maximum crate dimensions: width x height 420 mm x 270 mm Overall machine dimensions: length x width x height 4000 mm x 1200 mm x 1640 mm It is possible to view this crate washer on site. If you have any questions or comments, please do not hesitate to contact us. Sincerely, Leo Holland

Condition: excellent (used), Year of construction: 2004, This Pilot Plat has an ice condenser capacity of 100 litres and is designed to freeze-dry solids or liquids in ampoules, small bottles etc. Technical Data: Ice Condenser capacity: 12 kg Hjdpfx Aiew Snufjrent Ice Condenser output: 8 g / 24 h Ice Condenser temperature: - 75° C Manufacturer: Christ Year of construction: 2004 Floor Space: 130 x 130 x 200 cm + 180 x 60 x 200 cm

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel Hedjw H Aw Sjpfx Airsnt VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: new, functionality: fully functional, Laser Core Identification YLP: Ytterbium Laser Pulsed. This identifies it as a pulsed nanosecond fiber laser operating in the near-infrared spectrum (typically 1064 nm wavelength). HP: High Power. Indicates the heavy-duty sub-series designed for fast processing speeds and high ablation rates compared to the standard, low-power desktop marking modules. Hnsdpfjy Udyqsx Airot 1: Indicates the Optical Beam Quality (\(M^{2}\)) standard or series generation (typically targeting a beam parameter product near \(M^2 \leq 2.0\) for clean, tight focal spots). 30x240: Pulse Width / Duration Configuration. Refers to its tunable or specific pulse length capability (in nanoseconds), optimizing it for balancing rapid material removal without massive heat-affected zones. 200-200: Defines the power metrics.200 W Average Output Power: Capable of sustaining continuous pulsed work at 200 Watts. 200 kHz Pulse Repetition Rate (PRR): The maximum frequency of the laser pulses, determining how quickly it can scribe or clean surfaces. Electrical Requirements (90-240 VAC) Power Input: Features a universal, autoranging power supply unit (PSU). It safely plugs directly into standard global wall grids spanning 90V to 240V AC (Single Phase, 50/60 Hz) without needing heavy industrial 3-phase transformers. Core Applications Because of its high 200W power and high-frequency pulsed delivery, this model is typically integrated into CNC machinery or robotic cells for: High-Speed Laser Cleaning / Ablation: Removing rust, paint, oxides, and coatings from metals without damaging the base substrate. Deep Laser Engraving & Marking: Precision engraving on hard metals, ceramics, and highly reflective materials (like aluminum or copper). Silicon / Solar Panel Scribing: High-throughput cutting or edge deletion tasks in manufacturing. Brand new never used. Please check out our other listings as well.

Year of construction: 1991, condition: used, functionality: fully functional, machine/vehicle number: L7-614-14H, PRODUCTION LINE FOR THE PRODUCTION OF 330 X 330 MM ¼ FOLD NAPKINS. PRICE: PRINTING MACHINE Producer: Hobema Model: 14H Serial number: L7-614-14H Production date: 1991 EQUIPMENT 1. Double unwinder for reels up to: 1500 mm with lift • intake for roll core R 70 or 76 mm • max roll weight 200 kg • single motor drive with multi-V-belt • drive speed controlled by dancer • automatic machine stop at reel end • dust removal system 2. Calendering Unit • for equalizing the tissue thickness, reducing of dust, and improving the printing quality • drive from the central engine • hardened and ground cylinders 3. Web Aligner No. AND • FIFO web aligner positioned in front of printing station 4. Flexographic Printing Press • one printing tower frame for max five (5) printing units • moveable operating platform for operating the printing units • push-button operator panel • maximum format range 330 mm 2 • one central engine for all printers • motorized 360° radial register • ceramic coated anilox roller • one set mounting cylinders – for 330mm (Lunch) napkins formats • external air pumps to supply paint • lifting and dropping of ink trays • protection covers, safety switches 5. Strobe device for print control. 6. Infrared Drying Equipment • one drying infra-red cassette with temperature regulation • one fan for cooling the casette • automatic shut-off when the end of the material roll. 7. FIFO web Aligner No. II for embossing 8. Double embossing station • two-position embossing station • two sets rollers for embosiing – Formats: Lunch 330x330mm, round 330x330mm 9. Vertical folding frame with a cutting knife 10. ¼ Folding Head 11. Two-way product output and automatic transfer to packing machine 12. Electrical Equipment TECHNICAL DATA Max printing speed: 300m/min Real speed printing: 230 – 250 m/min Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Control – Siemens S5 Max Power 120 KW. ELECTRICAL DATA Supply voltage: 230 / 400 V, 3 – phases + PE, 50 Hz Max power 30 KW. Hjdjwnyatspfx Airjnt

Condition: used, Year of construction: 2000, functionality: fully functional, operating hours: 0 h, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 60 °C, inner dimension length: 12,500 mm, inner dimension width: 1,750 mm, inner dimension height: 2,000 mm, total length: 13,000 mm, total width: 2,000 mm, total height: 2,200 mm, overall weight: 4,000 kg, number of chambers: 1, number of shelf rows: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Good convection drying chamber with axial airflow, fan, and heating coil at the top and rear. Can be inspected at any time. Hsdszz Sapspfx Airjnt Functional.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Dryer: Manufacturer: Ryser GmbH, Switzerland Type: BAFAG ATU 35 Power: 3 kW Year of manufacture: 2015 Material conveying device: Manufacturer: Labotek Type: PGT 4-I/MV/MR/P1 Model: 101501 Year of manufacture: 2016 Hnjdpfx Aiju Rcz Dsrjt Power: 0.4 kW PRICE REDUCTION FROM 950 TO 750 EUR!!!

Condition: new, Year of construction: 2026, LUFT 700 VSD+PM COMPACT Screw Compressor with Refrigerated Air Dryer The LUFT 700 VSD+PM COMPACT screw compressor with an integrated refrigerated compressed air dryer combines state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 700 VSD+PM COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 5.5 kW motor and an impressive actual output of up to 690 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for sandblasting applications. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, large automotive workshops and manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 700 VSD+PM COMPACT oil-injected screw compressor with refrigerated air dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. Hodpjybvkaefx Airont The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 690 l/min ✅ Motor power: 5.5 kW Technical Specifications Parameter Specification Motor power 5.5 kW / 7.5 HP Voltage 400 V / 50 Hz Output at 0–6 bar Average 690 l/min Output at 6 bar 690 l/min Output at 8 bar 650 l/min Output at 10 bar 650 l/min Outlet connection diameter (G) 1/2" Dimensions 1350 × 600 × 850 mm Weight 200 kg

Condition: used, mileage: 43,595 km, power: 130 kW (176.75 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total length: 63,000 mm, total width: 25,600 mm, total height: 29,300 mm, Year of construction: 2009, Equipment: ABS, air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. [phone number]). Mercedes-Benz Atego 1018 A 4x4 with flatbed and tarpaulin Hnsdpfxszz U Ico Airet !!! Available in multiple units !!!, A70 Front axle differential lock, A71 Rear axle differential lock, AF8 Axle ratio i = 4.875 (H4/H5), AH7 Rear axle H4, 7.7 t, ring gear 368, AK6 Front axle 6.1 t, B02 Anti-lock braking system (ABS), B43 Trailer brake, 2-line, B56 Front coupling head for air replenishment, B65 Air dryer, heated, BB6 Drum brakes on front and rear axles, BB9 Pipeline rupture protection for braking system, C42 Stabilizer bar, rear axle, under frame, CC9 Omission of protective device, side, CL9 Power steering LS 6/LS 8, CR4 Mounting parts on the frame/hole pattern, CU0 Foldable under-ride guard, rear (Meiller), D15 Roof hatch, swiveling, D17 Turntable, E10 Camouflage light circuit, E21 Battery(ies), reinforced, E30 Battery main switch, 1-pole, E31 Power socket, E40 Trailer socket, 7-pole, E41 Trailer socket, 12-pole, E55 Socket for trickle charging, 24 V, E70 Intercom system, with socket, NATO, EC6 Trailer socket, 15-pole, EM8 PSM, body and trailer CAN, ISO 11992, ES8 Additional socket 24 V/15 A, cab railing, F07 Cab, double cab, steel, F20 S-cab, 180 mm extended, F30 Cab tilting hydraulics, FE5 Electric window lift, driver and passenger door, FN1 Distributor cockpit, FQ7 Storage compartment above windshield, 2 compartments, FS9 Exterior mirrors, electric, driver side, FV7 Pre-equipment, installation package, FW2 Omission of immobilizer (transponder), FX7 Front mirror, aerodynamic, front, GC5 Transmission G 60-6/9.2-1.0, GS1 Manual gearbox, GV5 Transfer gearbox VG550 3W, H03 Air conditioning, H04 Additional thermal insulation, HF2 Pollen filter, I42 Tires 365/80 R 20 front axle, IA1 Wheel formula 4x4, IB4 Model series LKN, IC1 Flatbed chassis, ID1 Leaf spring suspension, IL1 Domestic (Germany), IL8 Left-hand drive version, IP6 Wheelbase 3260 mm, IU5 10.5-ton truck, IX4 Inline engine, 4 cylinders, IY2 Hydraulic fluid, Pentosin CHF 11 S, JD3 Tachograph, digital, EG, speed limiter + additional recorder, ADR, JK3 Instrument cluster, graphic display, fuel economy meter, JZ1 Tachograph manufacturer VDO, K40 Fuel tank lock, K45 Filter, fuel tank filler neck, K81 Fuel pre-filter, heated water separator, KBCA Air reservoir and air dryer offset in frame, KCAH Steel bumper, KCR5 Frame head reinforced for special superstructures, KCUN Overhang modification 1135 mm, KCYQ Towing eyes front and rear, screwable front (not according to STANAG), KD6 Exhaust gas monitoring for nitrogen oxides (NOx), KE8 On-board diagnostics 1.0 with NOx control, KFKV Cab tilting pump relocation, KFMP Cab installation package for BWFPS, KG0 Stainless steel muffler with SCR catalytic converter, KJ1 Main muffler, right, side on the frame, KK45 Filter for fuel tank filler neck, KKSN Main tank, right, 200 L, steel, (540x620x620), KKVD AdBlue tank, offset to the left, KLSH Protective grid for rear lights, KLSJ Protective grid for turn signal lights, KMJN Compact air filter, standing behind cab, KP1 AdBlue tank, 25 l, KP9 AdBlue container, plastic, KQ29 Trailer or towing coupling, manufacturer RINGFEDER, KQBA Automatic hook coupling; size: K2 D/UN763 (for drawbar eyes acc. to VG740, KTBB Weight variant 11 t (6.1/6.2), KZYC Painting, bare parts, L72 Electrical system, for external superstructure, M89 Intake air preheating for cold start, MB1 Engine brake, with constant throttle, MD4 Speed limiter 90 km/h, EG, MD9 Cruis

Condition: ready for operation (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 070079A, total height: 4,500 mm, total length: 5,400 mm, total width: 5,500 mm, pressure: 6 bar, control cabinet height: 2,000 mm, control cabinet length: 2,500 mm, control cabinet width: 500 mm, operating temperature: 25 °C, working height: 950 mm, heating capacity: 107 kW (145.48 HP), number of seats: 66, workpiece length (max.): 3,200 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, emergency stop, Giardina drying oven, manufactured in 2007 with three different climate zones: evaporation zone - heating zone - drying zone Mobile pallets with conveyors, therefore no minimum size requirement for components Continuous vertical conveyor system Hsdszcnu Hopfx Airent

Condition: good (used), Year of construction: 2003, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Hodpfxozbau Ne Airjnt

Condition: used, mileage: 16,745 km, power: 130 kW (176.75 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total length: 61,500 mm, total width: 25,600 mm, total height: 29,300 mm, Year of construction: 2009, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (at the following telephone number). Hnsdpszz U Iisfx Airjt Mercedes-Benz Atego 1018 A 4x4 Flatbed with Cover !!! Available in multiple units !!!, A70 Front axle differential lock, A71 Rear axle differential lock, AF8 Axle ratio i = 4.875 (H4/H5), AH7 Rear axle H4, 7.7 t, ring gear 368, AK6 Front axle 6.1 t, B02 Anti-lock braking system (ABS), B43 Trailer brake 2-line, B56 Coupling head at the front, for air replenishment, B65 Compressed air dryer, heated, BB6 Drum brake on front and rear axles, BB9 Pipe rupture protection for braking system, C42 Stabilizer, rear axle, under frame, CC9 Deletion of protection device, lateral, CL9 Steering LS 6/LS 8, CR4 Mounting parts on the frame/hole grid, CU0 Underrun protection, foldable, rear (Meiller), D15 Roof hatch, swiveling, D17 Turntable, E10 Camouflage light circuit, E21 Battery(ies), reinforced, E30 Battery main switch, 1-pole, E31 Power socket, E40 Trailer socket, 7-pole, E41 Trailer socket, 12-pole, E55 Socket for trickle charging, 24 V, E70 Intercom system, with socket, NATO, EC6 Trailer socket, 15-pole, EM8 PSM, body and trailer CAN, ISO 11992, ES8 Auxiliary socket 24 V/15 A, cab bracket, F07 Cab double cab, steel, F20 S-cab, 180 mm extended, F30 Cab tilting hydraulics, FE5 Electric window lift, driver and passenger door, FN1 Distributor cockpit, FQ7 Storage compartment above windshield, 2 compartments, FS9 Exterior mirror, electric, driver's side, FV7 Pre-installation, installation kit, FW2 Deletion of immobilizer (transponder), FX7 Front mirror aerodynamic, front, GC5 Transmission G 60-6/9.2-1.0, GS1 Manual gearbox, GV5 Transfer gearbox VG550 3W, H03 Air conditioning, H04 Additional thermal insulation, HF2 Pollen filter, HH1 Hot water auxiliary heater, Eberspächer D5W S, I42 Tires 365/80 R 20 front axle, IA1 Wheel arrangement 4x4, IB4 Model series LKN, IC1 Flatbed chassis, ID1 Leaf spring suspension, IL1 Domestic (Germany), IL8 Left-hand drive version, IP6 Wheelbase 3260 mm, IU5 10.5-ton vehicle, IX4 In-line engine, 4 cylinders, IY2 Hydraulic fluid, Pentosin CHF 11 S, JD3 Tachograph, digital, EC, speed sensor + additional recording, ADR, JK3 Combination instrument, graphic display, fuel economy meter, JZ1 Tachograph manufacturer VDO, K40 Fuel tank lock, K45 Strainer, fuel tank filler neck, K81 Fuel pre-filter, heated water separator, KBCA Air reservoir and air dryer mounted offset in the frame, KCAH Steel bumper, KCR5 Frame head reinforced for special attachments, KCUN Overhang change 1135 mm, KCYQ Towing eyelets front and rear, screwable at the front (not according to STANAG), KD6 Exhaust gas monitoring for nitrogen oxide (NOx), KE8 On-board diagnosis 1.0 with NOx control, KFKV Cab tilting pump relocation, KFMP Cab installation package for BWFPS, KG0 Stainless steel silencer with SCR catalytic converter, KJ1 Main silencer right, lateral on the frame, KK45 Strainer for fuel tank filler neck, KKSN Main tank right 200L, steel, (540x620x620), KKVD AdBlue tank mounted offset to the left, KLSH Protective grille for taillights, KLSJ Protective grille for turn signal lights, KMJN Compact air filter standing behind the cab, KP1 AdBlue tank, 25 l, KP9 AdBlue container, plastic, KQ29 Trailer or towing hitch, manufacturer RINGFEDER, KQBA Automatic hitch; size: K2 D/UN763 (for towing lugs acc. to VG740, KTBB Weight variant 11 t (6.1/6.2), KZYC Painting of unpainted parts, L72 Electrical system, for third-party body, M89 Intake air preheating for cold start, MB1 Engine b

Condition: used, This listing is for the Stuart CR302 Infrared Hotplate stirrer Hsdpfxjxhfq Uj Airsnt The unit is in full working condition and is ready for immediate use Overview & Key Features Infrared (IR) Heating: Utilizes a 900 W infrared heater—this allows it to boil 1 litre of water over 30% faster than standard 1200 W ceramic hotplates. Powerful Magnetic Stirring: Equipped with rare-earth magnets, it can stir up to 15 litres of liquid. Stirring speed is adjustable, ranging from 100 to 1500 rpm, with feedback control to maintain steady rates. Temperature Capability: The hotplate can reach a maximum temperature of 400 °C. Size & Portability: Hotplate surface: 30 × 30 cm Overall dimensions: approximately 32 × 37 × 11 cm (W × D × H) Weight: about 4 kg Power Supply: Designed for use with 240 V, compatible with standard UK lab mains at 50/60 

Condition: good (used), functionality: fully functional, working width: 500 mm, total width: 1,100 mm, total length: 2,250 mm, total height: 1,400 mm, Water-cooled LED-UV dryer in operation; the machine is equipped with a control system allowing speed adjustment. It features two powerful water-cooled LED lamps for immediate surface drying. Hnjdpfjy Exz Rex Airot

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, Electrolux professional dryers, 2 models, UNUSED. - 2x Electrolux TD6-16, dimensions = 720x1210x1700 mm, 400V, 60 Hz, 14.3 Kw, PRICE = €3750 Hnedpfozg D Uisx Airjt The Electrolux TD6-17S is an industrial stack dryer with two drums and a total capacity of 2 x 17 kg. This double dryer is designed for maximum efficiency, fast drying times, and low energy consumption, making it ideal for professional laundries and self-service laundromats.

Condition: like new (used), Year of construction: 2012, operating hours: 4,541 h, functionality: fully functional, machine/vehicle number: SN:79004, travel distance X-axis: 1,035 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 620 mm, feed rate X-axis: 35 m/min, feed rate Y-axis: 35 m/min, feed rate Z-axis: 35 m/min, nominal power (apparent): 14 kVA, torque: 96 Nm, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 1,000 kg, total height: 2,850 mm, total length: 2,500 mm, total width: 2,910 mm, table width: 540 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 5,100 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,541 h, coolant supply: 3 bar, distance table to spindle center: 150 mm, spindle motor power: 1,400 W, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The machine is in excellent condition and is almost like new. It has been used almost exclusively for aluminum prototype construction. Disassembly upon request. Here are all the details from the technical description. SN: 79004, Year: 2012 Commissioned: February 2014 UVA 1035 PLUS Heidenhain Vertical machining center with HEIDENHAIN TNC 620 control, new price, after discount, net 79,900.00 Standard equipment of the UVA 1035 PLUS as ex works: - Computer-optimized, vibration-damping machine base made of gray cast iron - Large linear guides with 45 mm width in all axes Description Overall price - CNC control Heidenhain TNC 620 - Ergonomically arranged control panel with electronic handwheel - Digital Heidenhain drives in all axes - Ball screws (supported on both sides and preloaded) diameter 40 mm - Pitch 12 mm in all axes - Rapid traverse rate 35 m/min in all axes - Guide covers (telescopic) in all axes - Spindle taper SK 40 DIN 69871 A - Tool pull stud DIN 69872 - Main drive with 13 kW, 96 Nm - Main spindle speed range 10 - 10,000 1/min - Preparation for internal cooling 20 bar - Tool changer (dual-arm gripper) with 24 storage locations - Work area full protection with large viewing doors and 2 work area lights - Large coolant tank with 380 l capacity - 2 chip drawers for easy and quick manual chip disposal - Flood coolant 3 bar / 60 l/min - Chip flushing in the work area - Spray gun for cleaning the inside of the machine - Signal light 2-color - Festo pneumatic system - Automatic central lubrication in all axes - All axes: Positioning accuracy +/- 0.005 mm - Repeat accuracy +/- 0.003 mm (ISO 230-3) - Painting in light gray (RAL 7035) and blue gray (RAL 7031) - Documentation - UVA Unverzagt machining centers comply with the CE standard UVA 1035 PLUS Heidenhain Technical details of the machine Travel ranges Travel X-axis [mm] 1,035 Travel Y-axis [mm] 540 Travel Z-axis [mm] 620 Distance spindle bottom edge to table [mm] 150 - 770 Work table Table length [mm] 1,200 Table width [mm] 540 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 1,000 Feed Rapid traverse X and Y axis [m/min] 35 Rapid traverse Z axis [m/min] 35 Diameter ball screw X and Y axis [mm] 40 Diameter ball screw Z axis [mm] 40 Main spindle Main spindle speed max. [1/min] 10,000 Main spindle power [S6-40% ED kW] 14 Main spindle torque max. [Nm] [S6-25%] 96 Tool holder SK 40 Tool magazine Number of tool magazine positions 24 Tool change time [sec] 2.8 max. tool diameter [mm] 80 max. tool length [mm] 300 max. tool weight [kg] 7 Coolant system Volume coolant tank [l] 380 Through coolant pressure [bar] 3 Through coolant [l/min] 60 Internal coolant supply pressure [bar] 20 (optional) Air blow external yes Basic machine data Installation area width [mm] 2,910 Installation area depth [mm] 2,500 Machine height [mm] 2,850 Weight of the basic machine [kg] 5,100 Electrical connection power [kVA] 30 Required pneumatic connection [bar] 6 Required compressed air [l/min] 260 Control Manufacturer Heidenhain Hedpfozzrmpjx Airsnt Control type TNC 620

Condition: used, Year of construction: 2018, type of input current: three-phase, input current: 15 A, input voltage: 400 V, We offer this used Chiossi & Cavazzuti Asso 600 digital print machine dryer, year of construction 2018, PERFECTLY functional + extra motor (never had to use, just have it for backup) Power: 9.5 kW Phases: 3+PE Current: 15 A Hnodpozzd Nvefx Airot Voltage: 400 V Frequency: 50/60 Hz Serial number: 1908 Product code: 1390047 Year of manufacture: 2018 Weight: 440 kg Location: HUNGARY, Szolnok 5000 ZIP If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2022, operating hours: 360 h, functionality: fully functional, machine/vehicle number: 521080, total height: 3,780 mm, total length: 10,800 mm, total width: 5,160 mm, volume flow: 27,000 m³/h, type of input current: AC, inner dimension height: 3,000 mm, inner dimension length: 10,000 mm, inner dimension width: 5,000 mm, input voltage: 400 V, space requirement height: 3,780 mm, space requirement length: 10,800 mm, Equipment: cabin, documentation/manual, emergency stop, lighting, DURST combined painting and drying system D-LTA 30/30-ü-natural gas – Year of manufacture 2022 For sale is a high-quality combined painting and drying system from the manufacturer DURST, type D-LTA 30/30-ü-natural gas, year of manufacture 2022. The system is in very good and well-maintained condition and is suitable for the professional processing of both conventional and water-based paints. It can be used flexibly in spray and drying operations and features a powerful supply and exhaust air system, natural gas heating, heat recovery, and a modern PLC and frequency inverter control system. Technical highlights and features: • Manufacturer: DURST Lackier- und Trocknungsanlagen GmbH • Type: D-LTA 30/30-ü-natural gas • Year of manufacture: 2022 • Design: combined painting and drying booth • Booth internal dimensions: approx. 10,000 × 5,000 × 3,000 mm • Booth external dimensions: approx. 10,800 × 5,160 × 3,080–3,780 mm • Air flow rate: approx. 27,000 m³/h for both supply and exhaust air • Motor power of ventilation: 2 × 11 kW • Total electrical connection: approx. 25 kW • Heating power: up to approx. 250 kW • Heating: direct gas surface burner, natural gas • Drying temperature: up to approx. 70 °C • Air changes: approx. 180 times • Air velocity: approx. 0.50 m/s • Heat recovery via cross-flow heat exchanger • Manufacturer's specification for heat recovery: approx. 47 % efficiency on average per year, up to approx. 80 % recovery factor under optimal conditions • DURST EcoTronic system with frequency-controlled fan control • Operating modes including spray operation, partial load operation, stand-by operation, and hall heating operation • HPS heating program control for efficient drying, especially for water-based paints • PLC control with frequency inverters and monitoring devices • Remote maintenance module Hnjdpfx Aiszubtlsret • LED ceiling lighting, Ex-Zone 2 • Illumination level approx. 1,090 Lux • Rear extraction wall with paint mist separator • Pre- and post-filtration of the supply and exhaust air • Partial filter ceiling with fine dust filtration • Sectional door and two partially glazed emergency exit doors • Insulated, double-walled booth housing with 80 mm mineral wool panels In spray operation, the system operates in fresh air/exhaust air mode. The drawn-in fresh air is filtered and heated via the gas surface burner. The exhaust air is passed through the paint mist separator and post-filtration. In drying operation, the system operates primarily in recirculation mode with a fresh air proportion of approx. 10 %. The integrated HPS control system enables energy-efficient and uniform drying and is particularly interesting for processing modern water-based paints. Another significant advantage is the integrated heat recovery system, which allows a considerable amount of the heat contained in the exhaust air to be fed back into the process. The system dates from 2022 and is in very good condition. Due to the generous booth dimensions, the high air flow rate and the extensive control and energy technology, it is ideally suited for industrial and commercial painting applications. Further technical documents and documentation for the system are available and can be provided upon request.

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide-belt sanding machine with transverse and longitudinal sanding units for sanding, among other things, veneer before painting. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm (constant) Workpiece thickness: max. 3-140 mm Conveyor bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, incl. dust extraction system Feed speed: 4.5-22 m/min (adjustable) Sanding units: transverse/longitudinal/brush Brush roller unit: centrally adjustable in height Diameter: 150 mm Drive power: 1.5 kW Bristle material: fiber Hjdpfx Aeya I Rijirjnt 1. Transverse sanding unit: fail-safe braking system, pneumatic belt tension, belt monitoring, pressure pad belt system, intermittent belt extraction, sanding belt dimensions: 4900 x 150 mm, belt sanding speed: 12 + 24 m/s, drive power: 13 / 17 kW 2. Longitudinal sanding unit: stepless, electronic control of the sanding belt speed via a frequency converter, fail-safe braking system, pneumatic belt tension, intermittent belt extraction, infrared belt control, sanding belt running in the opposite direction, sanding belt dimensions: 2620 x 1350 mm, belt sanding speed: 0.3 – 12 m/s, drive power: 11 kW Graphical operator terminal for entering machine setting values, incl. numerical thickness adjustment and display of fault sources, workpiece throughput, and feed speed. Electronically controlled pressure bar. Distance between guide rollers: 40 mm Pneumatic belt tension. The contact surfaces of the pressure bar automatically adjust to the shape of the workpiece. Weight: approx. 5500 kg Space requirement: approx. 2550 x 2675 x 2400 mm

Condition: used, Year of construction: 2014, A high-performance, fully operational industrial roller coating line by CEFLA. All machines are from the 2014 and operated continuously until the end of 2024 (discontinued only due to the end of production), well-maintained, and ready for immediate integration into production. This setup is perfect for furniture factories, flooring manufacturers, and door producers seeking top-tier automation and flawless surface finishing Line Composition (15 Units Total): Fully operational: Coating & Filling Machines: 4 units - Smartcoater MF-EVO Roller Coaters 1 unit - CEFLA SP1-EVO Roller Filler/Spackling Machine UV Curing Ovens: 2 units - CEFLA UV-R M1 Curing Ovens 2 units - CEFLA UV-R M2 Curing Ovens Transporters: Hjdjzu Rufjpfx Airent 2 units – CEFLA TB900 Transfer Conveyors Dimensions: 900 x 1580 x Adjustable Height 860–940. Non-operational - for spare parts/repairs: 4 units – CEFLA Smartcoater MF-EVO Roller Coaters