Used Inspection Machine for sale (70,649)

Year of construction: 2018, condition: ready for operation (used), An optical inspection machine Göpel for the inspection of THT components, THT solder joints and wave-soldered SMD components is available. Component clearance: 120mm, max. component height top/bottom: 80mm/10mm, max. inspection dimensions X/Y: 540mm/450mm, max. workpiece dimensions X/Y: 620mm/510mm, inspection speed: approx. 100cm²/s, machine dimensions X/Y/Z: approx. 1200mm/1400mm/1800mm, weight: approx. 900kg. Documentation available. An on-site inspection is possible. Dusdpsy Aaflsfx Ag Rsr

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, air pressure: 6 bar, The principle of operation off the model PC40 machine is based on the automatic distribution, uninterrupted transfer and rotation of the parts which are visually inspected by two operators. The machine works according to the principle of uninterrupted kinematics, with the following advantage: 1. Uninterrupted transfer and rotation of the parts 2. Very limited wear of mechanical parts as the motion is continuous and without jerks. The products are automatically transferred one by one onto a driving chain fitted with dogs and an inclined place. The products rotate past two operators, sitting side by side. These operators check the products and remove manually those which they consider as defective. The other products are discharged into a box at the end of the chain. Feeding is ensured by automatic systems, Model AS-PC Workstation components: 2 machine workstations, A driving chain fitted with dogs ensures uninterrupted transfer of the products in front of the two operators. Workstation additional equipment: Normal discharge system for defective products after each visual inspection station. An emergency stop safety device. Four (4) mirrors for inspection of the products from particular angles, at the front and at the rear of the chain fitted with dogs Dsdpfx Aoyx Sayog Rsur

Year of construction: 2019, condition: ready for operation (used), An automatic optical inspection machine Göpel for inline quality control of electronic printed circuit boards is available. Inspection types: 2D/3D/360°/AOI, viewing angle: 45°, 3D camera module: ViewZ, resolution X/Y: 21µm/10.5µm, component clearance below/above the assembly: 50mm/40mm, max. inspection speed: 100cm²/s, max. inspection dimensions X/Y: 570mm/510mm, max. printed circuit board weight: 5kg, min. printed circuit board width: 80mm, machine dimensions X/Y/Z: approx. 1200mm/1450mm/1650mm, weight: approx. 950kg. Including licences. Documentation available. An on-site inspection is possible. Dedpfx Asymfcceg Rjur

Year of construction: 2014, condition: ready for operation (used), Two automatic optical inspection machines Koh Young for inline quality control of electronic printed circuit boards are available. Resolution: 15µm, height accuracy: +/-0%, max. 3D measurement height: 5mm, inspection speed: 18.3cm²/s, min. PCB dimensions X/Y: 50mm/50mm, max. PCB dimensions X/Y: 510mm/580mm, PCB thickness range: 0.4mm-5mm, component clearance below the assembly: 50mm. Machine dimensions X/Y/Z: approx. 1000mm/1270mm/1650mm, weight: approx. 600kg. Documentation available. An on-site inspection is possible. Duodpfx Aeymfcijg Rjr

Condition: ready for operation (used), Year of construction: 2013, A Heuft empty bottle inspector is available. Inspection areas: base/foot/sidewall/finish ring/underchip/finish, sensors: infrared, image processing system: Heuft reflexx, performance range: 5000-50000bottles/h, machine dimensions X/Y/Z: approx. 2050mm/1000mm/1850mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. Dedexqgxrepfx Ag Rsur

Year of construction: 2011, condition: ready for operation (used), Various laboratory devices are available for quality testing in the textile industry. 1) Textile tensile tester Textechno FPA ME, year of manufacture: 2000, max. speed of pull-off clamp: 5000mm/min, clamping dimensions X/Y: 46mm/10mm, clamping pressure 3bar/5bar/8bar: 1200N/2000N/3200N, max. clamping distance: 960mm, force transducer: E 10N/E100N/E1000N, accuracy: +/-1%, machine dimensions X/Y/Z: approx. 885mm/700mm/1730mm, weight: approx. 200kg, control: Textechno Bus. 2) Illuminated table White Screen Normlight, lighting: 3x 36W, machine dimensions X/Y/Z: approx. 1250mm/800mm/850mm. 3) Textile length measuring machine Yuan More YG086, year of manufacture: 2011, measurement: linear yarn density, yarn count: 1-6, frame circumference: 1000mm (+/-1mm), frame speed min./max.: 30r/270r/min, max. yarn frame turns: 9999, yarn traverse stroke: 35mm (+/-0.5mm), single yarn tension range: 0cN-100cN, machine dimensions X/Y/Z: approx. 850mm/680mm/550mm, weight: approx. 50kg. 4) Digital microscope Di-Li. 5) Light box Just color Viewing Light. 6) Cardwinder Graf & Co CCW15. Documentation available. On-site inspection is possible. Dusdeuanrwepfx Ag Rer

Condition: ready for operation (used), Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible. Duodjxz Ew Uopfx Ag Ror

Condition: ready for operation (used), Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible. Duodpfxjw R Uzvo Ag Ror

Year of construction: 2009, condition: ready for operation (used), Resolution X/Y (3D and 2D): 21μm/10.5μm, illumination: multispectral, multidirectional, component clearance above/below PCB: 40mm/100mm, max. inspection speed: 50cm²/s, inspection range X/Y: 450mm/350mm. Dimensions X/Y/Z: approx. 1150mm/1150mm/1450mm, weight: approx. 500kg, software: OptiCon Pilot 5.3. Including calibration tool, instructions, camera, lighting and repair software for error visualization. Computer was replaced in 2012. Documentation available. Djdpfx Ajtz Dkyog Reur

Condition: ready for operation (used), Year of construction: 2009, Two Polymaster sample display machines for the film industry are available. Working width: 1900mm/2100mm, roll weight: 100kg, machine dimensions X/Y/Z: approx. 2550mm/1050mm/2000mm. Documentation available. An on site inspection is possible. Dusdpfx Agjyh Nvte Rsr

Year of construction: 2009, condition: ready for operation (used), A Polytex foam coating machine is available. Roll width: 1900mm. Machine dimensions X/Y/Z: approx. 2350mm/2300mm/2500mm, weight: approx. 2400kg. Documentation available. An on-site inspection is possible. Dedjxt Rm Sopfx Ag Rjur

Condition: ready for operation (used), Year of construction: 2021, An automatic Gise inspection machine for nails is available. Inspection method: image processing system, camera system: Keyence CV-X300F, throughput: approx. 60nails/min, detection accuracy: 98%, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1100mm, weight: approx. 150kg, control system: Siemens S7-1500. Including segmented conveyor. Documentation available. An on-site inspection is possible. Dujdpfxoyarqaj Ag Rjr

Year of construction: 1995, condition: ready for operation (used), Max. roll diameter: 400mm, height: 1753mm, documentation available. Dedpfxofwml Re Ag Rsur

Condition: good (used), Year of construction: 2006, Stork FIM NT12+ HD Final Inspection Machine Poultry Dusdpfx Asv Hx Nfjg Rsr Manufacturer: Stork Model: FIM NT12+ HD Year: 2006 Number of units: 12 Capacity: 8000-9000 BPH Machine Dimensions LxWxH: 1.365x1.205x2.750 mm Machine Weight: 750 kg.

Year of construction: 2003, condition: used, functionality: fully functional, OPTREL SEMI-AUTOMATIC INSPECTION MACHINE, MODEL PWL Semi-automatic inspection machine, ideal for small volumes and critical products requiring inspection. Particles and imperfections are visually inspected by an operator using a high-magnification lens and a brightness-adjusted setup. Built in 2003. CHARACTERISTICS - Wide product range (ampoules, vials and cartridges for injectable liquid products) - Change parts optimized for quick change over PRODUCTION - Output: 100 units/min - Working height: 900 ± 25 mm - Size: 2250 x 1750 x 2100 mm Dusdjycxayopfx Ag Rjr

Condition: used, SPECOLA - FABRIC INSPECTION MACHINE TECNOTEAM USED, WORKING WIDTH 190 CM, TOP LIGHTING Duedpjx A Inlefx Ag Rer

Year of construction: 2025, condition: new, functionality: fully functional, Flexor 440IS with EyeC ProofRunner Web 450 print image inspection system and REA-JET HR 4K printing system. The Flexor 440IS is the ideal fully integrated 100% inspection solution. The 440IS machine allows the operator to inspect a web width of up to 440 mm and remove defects. The machine offers flexibility and high performance demanded by customers with the highest quality standards. High-speed inspection, low maintenance costs, and full integration of the 100% inspection camera provide converters with a package that exceeds all expectations. The offer price is exclusive of camera and inkjet unit. These can be selected according to customer requirements and preferences. Have we sparked your interest? We would be happy to assist you! Duodpfewkt D Dox Ag Rsr

Condition: used, Year of construction: 2022, Koh Young Machine AL-SL-00713 1. LZALPHA L-S-20-4W-L-6.5M  1  AL-SL-00713 Zenith Alpha HS L-Size Single Lane 4W/8M L→R 20um L (Lean) Platform Platform: L (Lean) Platform (standard version) Type: Zenith Alpha, L-Size Camera Resolution: 20 microns Projection: 4-way grating projection Camera: 6.5 Megapixels Illumination: IR-RGB LED Operating System: Microsoft Windows 10 IOT Enterprise LTSC (Standard) Conveyor: Single lane Conveyor Type: Front fixed (Standard) Conveyor Belt Type: Timing belt - ESD (Standard) Conveyor PCB Transfer Height: 870–950 mm (Standard) Conveyor PCB Direction: L→R (Standard) Max. PCB Size: 490 × 510 mm (front fixed, Standard) Min. PCB Size: 50 × 50 mm PCB Thickness: 0.4–5 mm ESD: Standard + Extended Safety Option CE Declaration: English (Standard) Specification conforms to standard setup System Dimensions (W×D×H): 1000 × 1295 × 1627 mm HS Code: 9031.4990 Country of Origin: Republic of Korea 2. 803020-009105  1  to AL-SL-00713 AOI REVIEW STATION (REVIEW STATION SET, WINDOWS 10) Includes DELL XE3 PC with Windows 10, monitor, and keyboard HS Code: 8471.4900 Country of Origin: People's Republic of China 3. 101020-003007  1  to AL-SL-00713 Duodpfjx Tzhpsx Ag Rer UPS OPTION AOI_SPI (SMT750) APC – C-platform HS Code: 8504.4030 Country of Origin: Philippines

Condition: used, functionality: fully functional, BREVETTI CEA CARTRIDGE INSPECTION MACHINE, MODEL K32-400 Automatic inspection machine for the presence of bubbles, cap defects, stopper defects or wrong position in cartridges. With three inspection units for checking for particles. CHARACTERISTICS Duodpoxzupgefx Ag Rsr Height of infeed/outfeed: 900 +/- 25 mm AVAILABLE FORMAT PARTS - For containers: with a diameter of 8 to 52 mm and a height of up to 150 mm - For cartridges: Ø 8.65x63 mm and Ø 8.65x76 mm PRODUCTION -Output: up to 400 cartridges/min ENERGY CONSUMPTION - Electricity: 400V, 50/60Hz, 3Ph - Power: 8 kW - Compressed air: 5 bar DIMENSIONS - Size: 2400 x 2600 x 2440 mm (approx) - Net weight: 2800 kg (approx)

Condition: used, Year of construction: 2006, functionality: fully functional, MW TECHNOLOGIES BENCH TOP INSPECTION SYSTEM, MODEL MIH-DX Year of construction: 2006 Small machine optimized for small workstations, laboratories or production lines. For the inspection of vials, ampoules and other components for particulate particles. Suitable for integration in GMP-controlled environment; the stainless construction and enclosed hood facilitate cleanliness and inspection tasks. As the unit is rated 115 V/60 Hz, for operation in Europe (230 V/50 Hz) adapter or transformer may be required unless internal wiring has been converted. 7 units of this machine are available. CHARACTERISTICS Dedpfxsxzuite Ag Reur - Enclosed hood with viewing window and adjustable lighting system - Stainless-steel construction, robust and easy to clean - Controls on front panel: power switch, lighting selector, intensity dial - Lighting: On/off selection, intensity adjustment knob (as visible in photo) ENERGY CONSUMPTION - Voltage: 115 V AC (standard US mains) - Phase: single phase (1 PH) - Current: 5 A - Frequency: 60 Hz

Condition: not inspected (used), functionality: unexamined, overall weight: 70 kg, total height: 160 mm, jaw width: 160 mm, total length: 580 mm, total width: 350 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Jaw width: 160 mm Dodpfx Aeyn Dzgog Rjur MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 580 x 350 x 160 mm Weight: 70 kg External reference: Lot 8 /L.Schaible

Condition: not inspected (used), functionality: unexamined, overall weight: 70 kg, total height: 170 mm, jaw width: 160 mm, total length: 550 mm, total width: 160 mm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! Dusdpfx Agjyn Edpo Ror TECHNICAL DETAILS Jaw width: 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 550 x 160 x 170 mm Weight: 70 kg External reference: Lot 65/ Lotec

Condition: not inspected (used), functionality: unexamined, overall weight: 80 kg, total height: 130 mm, total length: 420 mm, total width: 300 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to collection within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. Auction of two vices with jaw widths of 120 mm & 160 mm! TECHNICAL DETAILS Jaw widths: 120 mm x 160 mm Dujdpfeyn Eakox Ag Rsr MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 420 x 300 x 130 mm Weight: 80 kg External reference: Lot 9 / L. Schaible

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: RLX10110, MACHINE SPECIFICATION Height of centres 240mm Distance between centres 1250mm Maximum cutting length 1080mm Swing over bed 480mm Swing over cross slide 257mm Swing in gap 700mm Gap width from faceplate 170mm Cross slide travel 230mm Spindle bore 80mm Spindle nose Camlock D1-8 Spindle speeds 25 to 2500rpm Main motor 7.5kW Tailstock quill travel 160mm Tailstock quill taper No. 5 MT Duodpfxext E Nne Ag Rer Approximate weight 2950Kg Dimensions W x D x H 2600mm x 1460mm x 1810mm MACHINE EQUIPPED WITH Prototrak RLX CNC control TRAKing Auxiliary output 3 jaw chuck Quick change toolpost and toolholders Enclosed guarding Coolant system Lighting

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Model - Thom SI‐900 Duodpfxjx Utd Ee Ag Ror Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.