Used Maka Hc 57 R for sale (48)

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: Fpsdpjvmywqefx Ag Hef - Mobile protective cabin with safety bumpers on the operator side.

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases. Fpodpfxjvmpx Re Ag Hef

Condition: used, Year of construction: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Fodpfov S Dn Dox Ag Hjpf Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Various tools and tool holders can be taken over by agreement. The machine can be inspected in Hermaringen.

Condition: good (used), Year of construction: 1998, functionality: fully functional, MAKA ECM 27 R Year of manufacture: 1998 - High-performance CNC milling center for 5-axis machining, ideal for machining aluminum and for mold making. - MAKA ECM 27 R in portal design. - Equipped with automatic central lubrication and control cabinet with air conditioning unit. - CNC control BWO 900C, memory 1 MB, in integrated PC. - Portable control panel BWO RC 910. Fpsdpfx Agot Dl U Es Hof Technical data: Working areas / cube dimensions: with tool length 130 mm and -Ø 60 mm X-axis: 3,000 mm Y-axis: 2,250 mm Z-axis: 800 mm, with 170 mm fixture height A-axis: 540° (+/- 270°) B-axis: 200° (+/- 100°) Rapid traverse speed: X/Y-axis: 40 m/min. Z-axis: 15 m/min. A/B axis: 10,000 °/min. 1 milling spindle 11 kW, Speed infinitely variable from 2,000 - 17,000 rpm, With ceramic bearings, liquid cooling. SK 40 tool holder with tool changing device. 1 chain tool magazine for 12 tools up to Ø 160 mm, including 2 for holding an angle drill head (fixed position coded), SK 40. 1 steel surface table 3,000 x 2,250 mm with T-slots. 1 vacuum pump approx. 140 m²/h, with 250 liter tank. 1 piece vacuum clamping circuit. Work safety: With safety cabin for the rear of the machine, side access door, the cabin is open at the top. Slatted curtain on the operator side and safety bumper on the front of the table. Repairs / renewal before delivery: - Maintenance. Connected loads: Voltage: 400 V (max. +/- 5%), frequency: 50 Hz Rated power: 22.5 kW The use of an RCD in the machine supply line is not possible. Operating temperature: 10 - 35° C Pneumatics: 6 bar, approx. 10 m³/h Tool holders and processing tools are not included in the scope of delivery. Used machine, without any guarantee or warranty. Optional: incl. installation and commissioning with production-ready handover!

Condition: excellent (used), Year of construction: 1995, still preserved CNC because little in use was used for door production , but can be used for any purpose . Double table, can be mounted from left and right side 4 axes Fodpfjig T Epsx Ag Hepf x 5000 mm y 1350 mm z 450 mm a 190° main spindle SK 40 8 kw water cooled up to 17 000 rpm chain magazine with 24 places

Condition: excellent (used), Year of construction: 1995, upon request Fpsdofxgmgepfx Ag Hsf

Condition: ready for operation (used), Year of construction: 1999, Two Maka Machines: Year: 1999 · Machine No: 422 799 Key specifications Model: MAKA KPF 334R Control: BWO 900C CNC (integrated PC, ~1 MB memory) Working area: X = 1,000 mm, Y = 1,000 mm, Z = 300 mm (fixture height ~120 mm) A/B axes: A = 540°, B = ±100° (200° total) Rapid traverse: X/Y = 45 m/min, Z = 15 m/min, A/B = 10,000°/min Fpodpfsxwux Tox Ag Hjf Spindle: HSD high-speed spindle — 6.8 kW, 2,000–24,000 rpm, ceramic bearings, air-cooled (nominal power from 12,000 rpm) Tooling: SK30 spindle taper; 10-place drum tool magazine (tools up to Ø60 mm, length ≈130 mm depending on diameter) Table: Aluminium work table ~1,000 × 1,000 mm (T-slots / grid) Vacuum: Vacuum clamping system (vacuum pump spec commonly listed as ~54 m³/h on similar units) Lube: Central automatic lubrication system Electrical: 400 V, 50 Hz (verify on site) MAKA KPF 334 RT – 5-Axis CNC Machining Centre Year: 1999 · Machine No: 422 799 Key Specifications – MAKA KPF 334 RT Working travel: X ≈ 2,750 mm · Y ≈ 2,400 mm · Z ≈ 700 mm A-axis rotation: ~540° · B-axis swivel: ~200° Rapid traverse: X/Y ~40 m/min · Z ~15 m/min · A/B ~10,000°/min Dual work tables: ~1,000 × 1,000 mm each (coupleable) Control system: BWO 900 / BWO 900C CNC Spindle: High-speed milling spindle (eg ~27,000 rpm capacity) Tool magazine: Multi-station drum (tools up to Ø60 mm / L approx 130 mm, check actual) Vacuum clamping system & automatic central lubrication Electric: 400 V / 50 Hz (buyer to verify local connection)

Condition: excellent (used), Motor power 2,02 kW Pneumatic clamps Pneumatic depth Fpedpoh Im S Njfx Ag Hef Shoulder length 220 cm Working depth 16 cm

Condition: used, Year of construction: 1999, Used MAKA KPF 334 RT 5-Axis CNC Machining Center Year of Manufacture: 1999 High-performance CNC milling center for 5-axis machining, ideal for machining deep-drawn parts. Compact design with control cabinet integrated into the base frame. Equipped with automatic central lubrication and a control cabinet with air conditioning unit. Model/Version: Gantry-type machine with two aluminum tables Axis Data: Axis: Size / Travel / Speed X-Axis: 2,750 mm / 40 m/min. Y-/V-Axis: 2,400 mm / 40 m/min. Z-Axis: 700 mm / 15 m/min. Rotation Axis: 540° / 10,000°/min. Swivel Axis: 200° / 10,000°/min. Machine connection: Voltage: 400V Voltage deviation: max. +/- 5% Operating temperature: 10 - 35° Air pressure: 6 bar Working areas / workpiece cube dimensions: X-axis: 2 x 1,000 mm (coupled 2,150 mm) Y-axis: 1,000 mm Z-axis: 400 mm These specifications are based on a fixture height of 170 mm / tool length of 60 mm. 1 Equipment 1.1 Table design Two aluminum surface tables with threaded bushings for mounting, each measuring 1,000 x 1,000 mm. The tables can be coupled for machining large components. Both table tops are also equipped with threaded bushings and centering bushings (or dowel pins) to accommodate the customer's milling fixture, as specified. 1.2 Vacuum supply Machine equipped with a vacuum system. 1 Vacuum Pump 1.3 Clamping System 1 Vacuum clamping circuit with vacuum distribution unit, pressure gauge, and pressure switch. Plug-in couplings mounted on the machine table. 1.4 Milling Unit: 1 DFM 83/90 milling spindle, ER16 / M22 x 1.5 2.5 kW / 27,000 rpm Universal unit for 5-axis milling with 90° head, tool holder ER16 / M22 x 1.5 1,000 to 27,000 rpm (infinitely variable speed), air-cooled. A-axis 540° (rotation axis +/- 270°) B-axis 200° (swivel axis +/- 100°) 1.5 Axis Drives Ball screw in the X/Y and Z axes; A/B axes with hollow shaft drives. 1.6 Work Safety 1 sliding door per table, automatically opening. Includes protective cabin. 1.7 Control System 1 BWO 900 machine control unit with 1 BWO 900C control unit, mounted on a mobile control panel. 1.8 Mains Voltage The machine is equipped for the following mains voltage: Voltage: 400 V (max. +/- 5%) Installed power: approx. 9 kW Fsdpfx Asv S Ut Deg Hepf Frequency: 50 Hz The use of residual current protection in the machine supply line is not permitted. 1.9 Country Specification Technical machine documentation in German. Consisting of: - Operating instructions for the machine - Operating instructions for the control system - Electrical and pneumatic circuit diagrams - Control system language in German.

Condition: good (used), Year of construction: 2000, MAKA KPF 334R Year of manufacture: 2000 Compact design with control cabinet integrated in the base frame. CNC control BWO 900C, memory 1 MB, in integrated PC. Technical data: Working areas / cube dimension: with tool length 130 mm and -Ø 60 mm X-axis: 1.000 mm Y-axis: 1.000 mm Z-axis: 300 mm, with 120 mm fixture height A-axis: 540 B axis: 200° (+/- 100°) Fpsdpfx Aeir Aq Tjg Hof Rapid traverse speed: X/Y axis: 45 m/min. Z axis: 15 m/min. A/B axis: 10,000 °/min. 1 piece high-speed milling spindle HSD 6,8 kW, speed infinitely variable from 2,000 - 24,000 1/min, nominal power from 12.000 1/min. With ceramic bearings, air-cooled. Tool holder SK 30 with tool changing device. 1 piece travelling drum tool magazine for 10 tools up to Ø 60 mm and - depending on the tool diameter - 130 mm length from face contact. Aluminum table top 1.000 x 1.000 mm with grid holes 1 piece vacuum pump 54 m²/h, 1 x vacuum clamping circuit Automatic central lubrication, control cabinet with air conditioning unit. Working safety: Sliding door for front loading, protective cabin for the rear of the machine, with side access door, the cabin is open at the top. Connection values: Voltage: 400 V (max. +/- 5%) Frequency: 50 Hz. It is not possible to use a residual current device in the machine supply line. Operating temperature: 10 - 35° C Pneumatic: 6 bar, approx. 18 m³/h Tool holders and machining tools are not included in the delivery. Second-hand machine, without any guarantee and warranty.

Year of construction: 1997, condition: repair required (used), Mortising machines Maka Db-6 v Second hand 1977 Make: Maka Model: Db-6 v Description: Fsdpfjfd Rxqox Ag Hopf VERTICAL MORTISER MAKA DB-6 V Year of construction: 1977 Machine condition: very good afer repairs capital Offertype: used machine offer Location: Poland Technical data: AFTER REPARIRS VERY IMPORTENT VERTICAL Year: 1977

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Available immediately Fjdpegiwl Defx Ag Hjpf

Condition: excellent (used), Band saw Manufacturer: Maka Model: HB 600 Max. cutting height: 370 mm Wheel diameter: 600 mm Throat depth: 585 mm Table size: 800 x 580 mm Blade width: 28 mm Fodpfx Agsy Afxws Hopf Transport dimensions: Width: 630 mm Length: 1050 mm Height: 2250 mm, with pallet Weight: 265 kg, with pallet

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 1,645 mm, travel distance Y-axis: 1,760 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, controller model: 840D s, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis MAKA DC 3 was manufactured in 2016. It features a spindle speed range of 18,000 rpm and impressive axis travels of 1645 mm in the X-axis, 1760 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a table size of 1200 x 1400 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the MAKA DC 3 vertical machining centre we have for sale. Contact us for further details. • Table size: 1200 × 1400 mm Technical Specification Taper Size SK 40 Fjdpjyycdlsfx Ag Hspf

Condition: good (used), Year of construction: 1994, functionality: fully functional, Forward/reverse operation, 3–1,000 rpm, brake motor with Haffner 3-roller feed, 8 speeds, good condition. Transport available at additional cost! Fsdpfxsybv A Ao Ag Hopf

Condition: good (used), Year of construction: 1990, Table milling machine with power feed Fjdpfx Aeyy I R Rjg Hjpf Tilting spindle With table extension on both sides

Condition: excellent (used), Catalogue number 7266 TECHNICAL DATA - Shaft width: 530mm - 4-knife shaft - Noise-reducing comb - Shaft guard - Table length: 2900mm - Longer infeed table: 1655mm - Cast iron tables - Both tables adjustable - Original adjustable cast iron fence - Brake - Extraction port diameter: 140mm - Motor: 4kW - Dimensions (L/W/H): 2900x1000x1210mm - Weight: 695kg ADVANTAGES – German-made – 4-knife shaft – Brake – Noise-reducing comb – Longer infeed table – Unpainted – Used jointer, in very good condition Fjdpfx Agoyz Nntj Hspf Original photos Start-up video of the machine: youtube.com/watch?v=v_3ECkLDWVI Net price: 18,900 PLN Net price: 4,500 EUR (depending on exchange rate 4.2 EUR) (Prices may change with greater fluctuations)

Condition: used, Year of construction: 1973, Storage location: Nattheim Fpedpfovvkt Ujx Ag Hef

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: 8905829, power: 3 kW (4.08 HP), input voltage: 380 V, planing width: 430 mm, total width: 600 mm, total height: 1,200 mm, table length: 2,750 mm, Planing width: max. 430mm, table length 2750mm 4-blade shaft with reversible blade, toothed table lips Chip thickness adjustment via handwheel with magnifying glass display Fpodeuivw Tjpfx Ag Hof Motor: 3kW, 380V Condition and details see pictures

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Weight approx. 700 kg Availability: by arrangement Fsdpsw I Uinefx Ag Hspf Location: Flörsheim

Condition: ready for operation (used), Year of construction: 1999, number of axes: 5, This 5-axis MAKA FPM 470 CNC Wood Machining Centre was manufactured in 1999. Ideal for complex woodworking projects, it offers precision and versatility. If you are looking to get high-quality milling capabilities, consider the MAKA FPM 470 machine we have for sale. Contact us for more information about this machine. Additional equipment • Energy Chains: Various models Machine Benefits Technical Machine Benefits • Universal 2-axis module • 5-axis cnc machining center • A-axis rotation: 540° • B-axis swivel: ±100° (200° total) • Z-axis travel: increased from 350mm to 700mm • Harmonie drive upgrade for a and b axis • Pre-configured measuring system cables • Robot cable assembly and guide carriages Extra Information Control Unit Upgraded Control Interface Supports 32 axes and 8 channels 256MB NC Memory Dual-Core Processor Ethernet RJ45 (1 Gbit/s) No buffer battery needed Controller Upgraded from previous model to new unit Fjdpfxsx D Ebxe Ag Hopf Machine-Specific Data New Z-Axis Components: Ball screw drive Gear rack Bearings Guide rails and carriages Energy chain

Condition: excellent (used), 530mm Jointer MAKA Fjdpfxjyybv Hs Ag Hspf 4 traditional knives width: 530mm table length: 2900mm noise-reducing bars tilt-adjustable fence power supply: 380V, 4KW brake solid machine, very good condition, inspected

Condition: used, Year of construction: 1992, with Centrofix cutterhead Used, good condition, low operating hours Manufacturer: Maka Model: AH 430 Year of manufacture: 1992 Machine no.: 9201531 GS-tested for wood dust Motor: 3.0 kW Control panel on top Planing width: approx. 430 mm Infeed table length: approx. 1500 mm Outfeed table length: approx. 1200 mm Pendulum guard Table lips slotted/low-noise Number of knives: 4 pcs Centrofix cutter block Table adjustment via handwheel automatic brake Extraction connection: D 140 mm Required space: approx. 2700 mm x 1200 mm x 1400 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected, Fpedjxuv Rrspfx Ag Hsf without any warranty or guarantee

Condition: excellent (used), IM Very good condition. Fpodoyxnxlopfx Ag Hsf

Condition: used, Year of construction: 1999, Dowel hole drilling device: Pitch 16, 22, 25, 32 Drilling depth: 145 mm Fsdpev S Diuofx Ag Hopf Slot length: 240 mm Height adjustment range: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Extraction connection: 100 mm Machine length: 1280 mm Machine width: 960 mm Weight: 250 kg