Used Log Conveyer for sale (27,972)

Condition: used, maximum load weight: 17,450 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 03/2022, next inspection (TÜV): 03/2026, Equipment: ABS, Type Sierra, underrun protection steel, plastic mudguards, continuous aluminum frame cover, manual mechanical support (5t support load), drum brakes, 2 LED work lights, chassis structure, 4 x Doll steel bolster type Mammut, 8 x Doll square fixed stakes 2550mm, loading lengths: 2 x 2000 mm/2500 mm/3000 mm or 1 x 4000 mm/5000 mm/6000 mm, 50 mm towing eye. Blsdpfx Adexc R Uno Aer

Condition: used, Year of construction: 1989, machine/vehicle number: 1025, arm reach: 13,300 mm, load capacity: 2,300 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 1989 (factory overhaul 2007) Machine number: 1025 Track, m: 3.0 Crane type: OBX IV (year of manufacture 2007) Reach: 13.3 m Load capacity without grab: 2,300 kg / 13.0 m Grapple: included Crane arrangement: behind the cabin Cab side: left Saw: 1.3 m Alpha Bledpfx Adjv Ddtke Aer Measurement: dividing aid with 2-level measurement Year of manufacture 2007 !! Sold on behalf of the customer!! Available from April 2025

Condition: reconditioned (used), Totally renovated Log Haul Conveyor 8 Meters long Bsdpfx Asncft Usd Aslr

Condition: used, Year of construction: 2019, conveyors 3500 x 7000 mm (138" x 275" large printer) ENGLISH: • LISEC production line, which prints in up to 350 cm width, is about 20 meters long An entire production line consists of 1 x the cleaning, flame, Bljdov Ibmpspfx Ad Ajr 1 x the primer station 1 x the respective conveyor belts between the stations. • After cleaning, are placed on a mobile table, which is driven to the next station l receives the print jobs from the prepress department and controls the transport through the flame and the primer. In the flame station, the glass is flame-flamed with an open flame in the continuous process. This improves the uniformity of the surface tension of the glass, burns residues or dirt that has not been removed during washing and improves the adhesion of the primer with silane gas. A buffer tape transports the glass to the primer station, where the adhesion promoter is sprayed onto the glass at high speed from four nozzles. Then the glass runs onto the long positioning tape, which serves on the one hand as a buffer in front of the printing press and at the same time aligns the glass perpendicularly in the exact XY direction for the printing press. The electronic control of the 20-meter-long production line takes into account the format of the respective glass panes during the flame and prime and monitors their transport with sensors. LISEC transport unit 33/40 Pyrosil System 500 HE (Pyrosil application for UV Ink) LISEC transport unit 33/45S Primer station 500 HE LISEC transport unit 33/68 LISEC transport unit 33/28 mobile exhaust system pretreatment LISEC system control

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 113 kg, total width: 840 mm, total length: 1,620 mm, total height: 920 mm, fuel: super 95, fuel tank capacity: 3 l, Equipment: trailer coupling, The HS12288 log splitter from HZC Power impresses with a splitting force of 12 tons and a maximum splitting length of 530 mm. The 6.5 hp petrol engine ensures sufficient power and efficient work, while the splitting cycle of just 11 seconds guarantees fast wood processing. The device works in a horizontal position and is equipped with a fixed splitting wedge/splitting cross, which presses the wood against the wedge via the cylinder. The two-handed operation ensures additional safety. The log splitter is easy to transport thanks to the trailer coupling. General data: Manufacturer: HZC Power Model: HS12288 Splitting force: 12 t Bljdpfjwalutex Ad Aer Maximum splitting length: 530 mm Splitting cycle: 11 s Oil pressure: 270 bar Hydraulic oil capacity: 10 l (HLP46) Product weight: 113 kg Shipping weight: 140 kg Dimensions assembled (LxWxH): 162 cm x 84 cm x 92 cm Dimensions with packaging (LxWxH): 110 cm x 54 cm x 80 cm Special features: Splitting wedge: 15 cm x 20 cm (LxW) Trailer coupling: For easy transportation Working position: Horizontal Operation: 2-hand safety control Splitting wedge/splitting cross: Permanently mounted, wood is pressed against the splitting wedge via the cylinder Motor: Manufacturer: Jiao Model: 6.5 HP / 208 cc Engine technology: Single-cylinder, 4-stroke, air-cooled, OHV (overhead valves) Displacement: 208 cc Cylinder: Cylinder with cast iron sleeve Bore: 68.3 mm Stroke: 55.9 mm Fuel tank capacity: 3.1 l Oil capacity: 0.6 l Engine weight: 16 kg Dimensions (WxLxH): 321 x 376 x 346 mm These details summarize the most important technical specifications and equipment features of the HS12288 log splitter from HZC Power. Splitting force: 12 t - For effortless splitting of wood up to 530 mm in length and a maximum diameter of 50 cm. Cable starter: Easy engine start, even in cold temperatures. Splitting wedge/splitting cross: Permanently mounted, ensures effective splitting without constant readjustment. Hydraulic system: Powerful system with 270 bar oil pressure, ensures high efficiency and durability. Working position: Horizontal - allows you to work comfortably while lying down. Two-hand operation: For maximum safety when operating the log splitter. Oil filter: Integrated oil filter for a longer service life of the appliance. Trailer coupling: For easy transportation on private land, but without road approval. Robust frame: Sturdy frame ensures that the split material is held securely during the splitting process. Compact dimensions: With a width of 84 cm, the splitter can be easily transported on a trailer. Engine: 6.5 hp petrol engine with 208 cc displacement for powerful splitting. Integrated table surface: Provides additional space for storing pieces of wood while working.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2021, next inspection (TÜV): 05/2024, Equipment: ABS, -axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board Bjdpon I Id Eofx Ad Aelr * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic mudguards, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Also available for rent at short notice. We are happy to provide you with further information

Condition: used, maximum load weight: 33,960 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2026, 8 pairs of ALU stanchions / steel stools Exte D7 8 pairs of ALU stanchions and steel stool structure EXTE D7 Bjdpsn Ryfasfx Ad Aslr

Condition: used, empty load weight: 6,150 kg, maximum load weight: 32,850 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2022, loading space length: 13,000 mm, loading space width: 2,330 mm, loading space height: 1 mm, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, SAF axles, air suspension, first axle liftable, raise/lower function, ABS (Anti-lock Braking System), underrun protection, side aluminium underrun protection, landing gear, toolbox, stanchions. Body: 3-axle timber transport semi-trailer with 8 Ecco Steel stanchion cradles, LIKE NEW! 3x 9t SAF axles, disc brakes, first axle liftable, interchangeable 2" king pin, unladen saddle height approx. 1150mm, minimum free front clearance from the coupling center: 2240mm, lightweight chassis made from high-strength fine-grained steel. Loading height approx. 1540mm. Prices: model year 2021 from EUR 25,900.00 net up to new from stock for EUR 29,900.00 net! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! - . Bledpfow Ryuhsx Ad Asr

Condition: used, functionality: fully functional, Log yard complete with 66 boxes + Nicholson debarker (diameter 35") Bledpfx Adjvtmqws Aor

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Bedpfx Adeupiape Aelr Total weight 100 kg

Condition: used, maximum load weight: 15,030 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2021, total width: 2,550 mm, total height: 1,210 mm, Equipment: ABS, For enquiries regarding the vehicle, Mr. Seidel will be happy to assist you (by phone). Pavic HTA 20 QSTE 690 Short Timber Trailer Bsdpfx Adow Sf Ehe Aolr * Mileage: 230,265 km * Aluminium rims * Additional headlights on left, right, and rear of vehicle * Air suspension * Trailer coupling, 40 mm towing eye, Duomatic * SAF axles * Disc brakes * Wabco ABS * Spring brake actuators * Wabco smartboard * Permissible gross weight: 18,000 kg * Unladen weight: 2,970 kg * Payload: 15,030 kg * Tyre tread depth: 1st axle 12-14 mm, 2nd axle 8-14 mm We are happy to provide you with a leasing or financing offer upon request. Mr. Seidel (phone) will be happy to assist you. Further information can be found on our homepage. !!! Errors, changes, and prior sale reserved !!!

Condition: new, maximum load weight: 32,600 kg, overall weight: 40,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, PAVIC OptiPa PRSH 27 platform semi-trailer for transporting timber and long materials. * Chassis length approx. 13510 mm (head frame-head frame) * Chassis width approx. 2540 mm (outer frame-outer frame) * Sturdy steel bulkhead approx. 2,500 mm high * 16x OptiPa A7 one-piece aluminum stanchions Blodpon Hrrijfx Ad Aor * Steel floor 4/6 mm tear plate cover * Technically permissible total weight 43,000 kg * Unloaded ride height approx. 1400 mm with saddle height 1200 mm * Max. fifth wheel load approx. 16000 kg * 2" kingpin in accordance with SAE standard, interchangeable from below * 16x Optipa quick-release fastener system embedded in the outer frame and 8x as storage for stanchions distributed centrally over the entire length * 3x 9t axle with large disc brake and air suspension unit for 9t load capacity each Total lift approx. 180 mm * Lifting and lowering device with rotary slide valve * Axle lift first axle, automatic function, with starting aid * Smartboard/TIM/Infocenter * EBS brake system make Knorr or Wabco of our choice with Roll Stability program * Brand tires 385/65 R 22.5 * LED work lights * LED lighting system * 2x toolbox * CDP with zinc phosphating plus powder, maximum corrosion protection (only if powder paint is available) For further information please do not hesitate to contact us

Condition: used, maximum load weight: 28,550 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 03/2002, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, Wooden trailer with stanchions Bodpfxstuy Dro Ad Aslr 3 axles Air-suspended

Year of construction: 2020, condition: like new (used), Tapered rollers 550mm for log transport solid construction, good condition Bodpfx Aegvvvlsd Ajlr 2 pieces available roller length: 800 mm roller diameter: 400 mm shaft diameter: 45 mm 2 stationary bearings INA Sprocket: z= 25, zt=30, diameter: approx. 280 mm

Condition: used, functionality: fully functional, Year of construction: 2011, total length: 7,500 mm, block train used Blodpfx Ajvtmg Eed Ajr

Condition: new, functionality: fully functional, Year of construction: 2024, color: red, overall weight: 100 kg, total height: 1,000 mm, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more Blsdpsuph Uxjfx Ad Asr For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2011, Year of construction: 2011, Equipment: ABS, Errors and prior sale excepted. Viewing by appointment only. WhatsApp inquiries will not be answered. Blodpfx Asxbwpped Aor

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Blsdpfxjw Ug Ago Ad Aor

Condition: ready for operation (used), Two identical Burkle curved belt conveyors are available. Effective width: 400mm, length: 1800mm, feed rate: 37m/min, curvature: 90°. Documentation available. On-site inspection is possible. Bedowydg Ijpfx Ad Ajlr

Condition: used, empty load weight: 6,000 kg, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 02/2019, loading space length: 13,000 mm, loading space width: 2,330 mm, loading space height: 1 mm, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, first axle liftable, raise/lower function, ABS (anti-lock braking system), underrun protection, lateral aluminium side guards, support legs, storage box, stanchions. Body: 3-axle timber transport trailer with 6 Ecco Steel stanchion sockets, 3x 9t SAF axles, disc brakes, first axle liftable, interchangeable 2" kingpin, unladen fifth wheel height approx. 1150mm, minimum free front distance from fifth wheel center approx. 2240mm, lightweight frame made of high-strength fine-grained steel. Loading height approx. 1540mm! Bodpfxjwkvqao Ad Aslr Multiple units in stock from insolvency! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, intermediate sale, and errors!

Condition: used, functionality: fully functional, Year of construction: 2011, double turning device Bledpfx Adevtmk Dj Asr

Condition: used, Year of construction: 2025, The Holzkraft HSE 5-520 KH log splitter is designed for convenient and safe splitting of short logs for home or semi-professional use. Its compact design and easy operation enable efficient work even in tight spaces. Ideal for firewood preparation. Splitting force: 5 tons Splitting material length: max. 520 mm Splitting material diameter: max. 250 mm Bodpfx Adswxc Dij Aslr drive: Electric 230 V mass: about 50 kg

Condition: good (used), Year of construction: 2007, Built in: 2007 Bodpfxsqqi Sce Ad Ajlr Size: max 480 x 320 mm; min 200 x 110 mm bar length (pressed): max 1200 mm; min 800 mm Type of pallet: Euro pallet Cycle time: min 30 s/unit Air requirement: 10 Nm3/h, 6 bar Electrics: 380 VAC Electrics: 3 PH Electrics: 50 Hz Electrics: 5,5 kW Dimensions (L x W x H): 2000 x 3000 x 3100 mm Weight: 2000 kg

Condition: used, empty load weight: 6,150 kg, maximum load weight: 32,850 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2021, loading space length: 13,000 mm, loading space width: 2,330 mm, loading space height: 1 mm, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, liftable first axle, raise/lower function, ABS (anti-lock braking system), underrun protection, side aluminum underrun protection, support legs, storage box, stakes. Superstructure: 3-axle timber transport semi-trailer with 8 Ecco Steel stanchion bolsters, AS NEW! 3x 9t SAF axles, disc brakes, first axle liftable, replaceable 2" kingpin, chassis height unladen approx. 1150mm, minimum front clearance from kingpin center approx. 2240mm, lightweight frame made of high-strength fine-grain steel. Loading height approx. 1540mm! Available upon request also as model year 2022 for an extra charge of 1,000 EUR! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Blodjv Igvvepfx Ad Ajr

Condition: used, functionality: fully functional, Year of construction: 1995, cross conveyor - steep conveyor - disc inserter Blodpfx Adevtm Ucj Asr