Used Log Rounding Machine for sale (67,037)

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: - Bending and rolling processes performed manually, - Max. working width: 1020 mm - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of the upper die: approx. 85 mm - Max. adjustability of the bending die: 20 mm Iedpfxof S Tg Ts Acpjtn - Shaft diameter: 55 mm - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm - Weight: approx. 400 kg

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Itsdpozimgtjfx Acpon Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: new, Ostas 3-roll round bending machine SMR-S 1570 x 170 Technical specifications: Special equipment included in the price: motorized adjustment of the lower roll hardened rolls Itsdpjiw D Smsfx Acpon motorized adjustment of the rear roll 2 x digital display Sheet metal width 1570 mm Sheet metal thickness 8.0 mm max. Sheet metal thickness 7.0 mm for pre-bending Roll length 1570 mm Smallest diameter 255 mm Roll diameter 170 mm Weight 1960 kg Dimensions L-W-H 3200 x 920 x 1260 mm Motor 5.5 KW Equipment: Top and bottom rolls driven electrically Top roll can be swiveled out Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1980, machine/vehicle number: 4350, roller (bottom) diameter: 280 mm, roller (top) diameter: 300 mm, sheet thickness (max.): 20 mm, overall weight: 14,200 kg, working length: 2,000 mm, TECHNICAL DETAILS Bending length: 2,000 mm Max. sheet thickness: 20 mm Bending capacity: 15/11 mm Itedpfxezi D Sao Acpen Bottom roller diameter: 280 mm Top roller diameter: 300 mm MACHINE DETAILS Drive power, main drive: 16.2 kW Drive power, top roller drive: 4.8 kW Drive power, bottom roller drive: 3.7 kW Weight: 14,200 kg

Condition: new, Year of construction: 2026, - Capacity: 700 x 4 mm Isdpoh Rbvgofx Acpotn - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds - Conical rollers - Rotatable upper roller - Brake motor - Foot switch - Emergency stop - Documentation - 400V

Condition: good (used), Year of construction: 2005, machine/vehicle number: SBLG 0005, Proto Trax VL 3 jaw SMW chuck 11KW Spindle motor Isdpszb Ipzofx Acpjtn 104mm spindle bore Spindle speeds 30-1800RPM 350mm swing over cross slide X axis travel 280mm Z axis travel 1650mm 1750 mm between centres Coolant pump and tank

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1570 x 130 Special equipment included in the price: Motorized adjustment of the lower roll Itedpfx Acsiu Hvtspen Hardened rolls Motorized adjustment of the rear roll 2 x digital display Sheet metal width 1570 mm Sheet metal thickness 6.0 mm max. Sheet metal thickness for pre-bending 5.0 mm Roll length 1570 mm Smallest diameter 195 mm Roll diameter 130 mm Weight 1520 kg Dimensions L-W-H 3050 x 630 x 1020 mm Motor 2.2 kW Equipment: Top and bottom roll, electrically driven Top roll can be pivoted outwards Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3-Roll Round Bending Machine SBM 1270 x 95 Special equipment included in the price: Hardened rollers Motorized rear roller adjustment Digital display Features: • Asymmetrical 3-roll round bending machine with motorized drive • Hardened rollers • Motorized rear roller adjustment • Digital display • Top roller can be swiveled out • Taper bending device • Foot switch Technical details: • Sheet metal width: 1270 mm • Sheet metal thickness: 3.0 mm • Roller length: 1270 mm • Roller diameter: 95.0 mm • Smallest bending diameter: 140.0 mm • Motor power: 1.1 kW Itjdpfjg Tzbhex Acpon • Dimensions L-W-H: 2100 x 760 x 1250 mm • Weight: 470 kg

Condition: used, Year of construction: 2011, capacity / hour ca.: 6000 Ijdpfx Ajz Suupecpstn working direction: left-right Strom / Volt: 14 Technical data: working direction: left-right, rotative, clockwise capacity bph max.: 6000 labels: hot melt labels number of labelling stations: 1 number of bottle plates: 8 motor height adjustment: yes speed adjusment: frequence converter

Condition: new, Ostas 3-Roll Round Bending Machine ORM 1570 x 140 Special equipment included in the price: Hardened rolls Motorized rear roll adjustment Digital display Sheet metal width 1570 mm Sheet metal thickness 5.0 mm max. Sheet metal thickness 4.0 mm for pre-bending Roll length 1570 mm Roll diameter 140 mm Weight 1450 kg Dimensions L-W-H 2725 x 800 x 1100 mm Itjdpfoiu Hqgsx Acpen Motor: 2.2 KW Equipment: Top and bottom roll driven electrically Top roll can be swung out Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 130 Technical Specifications: Special equipment included in the price: Hardened rolls Motorized rear roll adjustment Digital display Sheet metal width 1070 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness 6.0 mm for pre-bending Roll length 1070 mm Smallest diameter 195 mm Roll diameter 130 mm Isdsiw D Dxspfx Acpstn Weight 1150 kg Dimensions L-W-H 2550 x 630 x 1020 mm Motor 3.75 kW Equipment: Top and bottom rolls, electrically driven Top roll can be swung out Taper bending device Asymmetrical roll arrangement Self-braking main motor Separate control and operating panel Safety cable, CE marking Values apply to St-37 / 240 N/mm²

Condition: new, Ostas 3-Roll Round Bending Machine SMR-S 1070 x 130 Technical Specifications: Special equipment included in the price: hardened rolls Isdpfx Acoiw D Dmspjtn motorized rear roll adjustment digital display sheet metal width 1070 mm sheet metal thickness 7.0 mm max. sheet metal thickness 6.0 mm for pre-bending roll length 1070 mm smallest diameter 195 mm roll diameter 130 mm weight 1150 kg dimensions L-W-H 2550 x 630 x 1020 mm motor 3.75 kW Equipment: top and bottom rolls driven by electric motor top roll can be swung out conical bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel safety rope, CE marking Values apply to St-37 / 240 N/mm²

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Isdsya H Nkepfx Acpjtn Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, functionality: fully functional, Year of construction: 2026, TECHNICAL SPECIFICATIONS: Number of rolls FOUR Itedpfegd T R Djx Acpen Geometry linear guides Maximum plate width mm 3000 Top roll diameter mm 390 Bottom roll diameter mm 370 Side rolls diameter mm 295 Installed power HP 40 Stepless variable rotation movement m/1' 4-8 Machine weight (guaranteed) Kg 19,000 Guaranteed performance with material yield point 260 N/mm² Rolling capacity (full working width) Ø 1950 mm 25 mm Bending performance (full working width) Ø 1950 mm 20 mm Rolling capacity (full working width) Ø 507 mm 18 mm Bending performance (full working width) Ø 507 mm 16 mm • Hardened and polished rollers • Siemens NC control • Cone bending device with electronic tilting

Condition: new, Year of construction: 2026, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, overall weight: 4,900 kg, total length: 4,050 mm, total width: 1,550 mm, total height: 1,470 mm, input voltage: 400 V, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, - 4 rolls - Capacity 2070 x 10 - Bending capacity 2070 x 8 - Hardened rollers - Diameter above roller 220 mm - Diameter under the roll 220 mm - Side roller diameter 180 mm - Hydraulic - Digital display for the left roller movement - Digital display for the movement of the lower middle roller - Digital display for the movement of the right-hand roller - The top roller can be folded out hydraulically - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down movement system with center and side rollers Isdpfx Aju Evqhjcpetn - Hydraulic balancing system - Overload protection - Documentation - 400V

Condition: new, Fastech 3-Roll Round Bending Machine FRS-S 2050 x 190 Technical Specifications: Ijdpfx Acjhzq D Uepotn Special equipment included in the price: hardened rolls motorized rear roll adjustment motorized lower roll adjustment 2 x digital display Sheet metal width 2050 mm Sheet metal thickness 7.0 mm max. Sheet metal thickness for pre-bending 6.0 mm Roll length 2050 mm Roll diameter 190 mm Smallest bending diameter 285 mm Weight 2,695 kg Dimensions L-W-H 3600 x 1100 x 1200 mm Motor: 4 kW Equipment: Top and bottom rolls electrically driven Top roll can be swung out Taper bending device asymmetrical roll arrangement self-braking main motor separate control and operating panel Safety cable Values apply to St-37 / 240 N/mm² CE marking

Condition: new, Year of construction: 2025, warranty duration: 12 months, cutting height (max.): 120 mm, cutting width (max.): 200 mm, power: 16 kW (21.75 HP), Equipment: rotational speed infinitely variable, Machine for processing components for modern log house construction with the perfect price-performance ratio for beginners, small productions, or as a supplement for special parts. Loading and positioning of the components is done manually – after starting the processing unit with the 2-hand buttons, the milling process runs automatically. Optional rolling tables and positioning stops are available for positioning the components. Itsdpfx Acewnt Htspsn

Condition: good (used), Fountain industrial bagging machine, suitable for the automated weighing and packing of fresh produce and other food products into bags. Designed for use within a commercial food-processing/packing environment and suitable for integration with an upstream weighing or feeding system. Itsdpfjzzzm Eex Acpjn

Condition: as good as new (ex-display), Year of construction: 2024, turntable diameter: 390 mm, bending angle (max.): 360 °, Stierli Radial 2500 CNC bending machine Radial bending machine with large rotary table for bends up to 360°. Iedpsgqfp Hjfx Acpstn Bending power 2500 Nm Bending capacity flat steel 60x15 mm S235 Bending capacity round steel ø30 mm S2353 turntable ø : 390 or 550mm Pre-feed machine year 2022 incl. hand- and foot pedal Machine as new Works like a classic hand bender, but driven, very precise and programmable. Incl. stop manual or programmable CNC stop 1, 2 or 3m. The bending angles as well as the stop positions are digitally programmable and can be stored in bending programs. The standard tooling is made by simple bending pins. A driver bends the material around these bending pins. These tools can also be manufactured very easily by the customer. In addition to the standard bending bolts, we (or our customers themselves) also manufacture tools for other sections. Possible are sheet metal bending, flat steel, round steel, various profiles, frames etc.. Bending jaws can also be screwed on, which allows bending of very small radii. (similar to a hand bending machine) This machine solves your bending tasks!

Condition: reconditioned (used), König Mini Rex 4000 Futura heading machine, 2-row, with forming station DR-RR400. For the production of circularly knitted, long-rolled, and wound products, as well as flat-compressed products. SK58-AK70 weight range: 30–120 g Itedpfx Ajz Ia H Iocpjn Output: 4000 pieces/hour Used and refurbished. Price upon request.

Condition: used, total length: 4,700 mm, total width: 1,200 mm, total height: 1,400 mm, Year of manufacture: 1991 Colour: Green Empty weight: 7.500 kg Price: On request - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 914931 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 14 - Max. prebending thickness [mm]: 6 - Max. working width [mm]: 3000 - Top roll diameter [mm]: 255 - Bottom roll diameter [mm]: 255 - Options: Cone rolling - Transport dimensions: 4700mm x 1200mm x 1400mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Itjdpfez Euawsx Acpjn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, roller diameter: 90 mm, working width: 700 mm, sheet thickness steel (max.): 35 mm, - Capacity 700 x 3.5 mm - Electrically adjustable rear roller - Digital display - Hardened rollers - 2 speeds Isdpfxjr Ign Ro Acpotn - Conical roller - Swiveling top roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: used, ATM Type: ATM Brillant 255 ATM Brillant 255 Cut-off Grinding Machine 400V Metallography Laboratory 2019 Description: A professional cut-off grinding machine, ATM Brillant 255, is for sale. Year of manufacture: [Year of manufacture] Industrial equipment for precise material separation in the field of metallography, laboratory, and material testing. Machine with base cabinet and integrated coolant system. Several matching cut-off wheels are available (see pictures). Very robust, professional quality. Technical data (according to the nameplate): Type: Brillant 255 Year of manufacture: [Year of manufacture] Manufacturer: ATM GmbH Electrical data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse rating: 32 A Mechanical data: Itodozizp Ajpfx Acpen Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel arbor: 32 mm Machine stands on a base cabinet with a coolant tank. Dimensions: Width: approx. 120 cm Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Eckenrundstossmaschine / Corner Rounding machine Tränklein EK Serial-No. ET104-1 Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Iodpfx Aoxlu E Aocpotn

Condition: used, Dough rolling and shaping machine, combination rolling machine, rolling machine -Roll width: approx. 600 mm -Rolling thickness: from 0.3 - 30 mm -with round and long wire type: SR0 -flour container -16 A-CEE plug -Connection: 380 V, 0.75 kW -The rolling machine is mobile Isdpob A Iciefx Acpotn -Dimensions: 1900/1250/H1900 mm -Weight: 430 kg