Used Maka Stv 71 for sale (37)

Condition: used, used, top equipmentincluding setting gaugeMake MakaType STV-71Column machinewith caulking tools see picturesWorkpiece stop 2 piecesStop rail right / left 2150 mmWorkpiece blow-out 2xFoot switch2-hand safety circuitpneumatic workpiece clamping at the side 1 piecepneumatic workpiece clamping from above 2 piecesExtraction connection D 120 mmSpace requirement approx. 1200 mm x 800 mm x 1500 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaul,without guarantee and warranty Gkodpfx Akevwf I Nohed

Condition: used, Year of construction: 1986, comb. with handle olive drilling unitused, great condition, little usedMake MakaType STV-71-BYear of construction 1986Machine no. 864653pneumatic workpiece clamping laterally 1 piecepneumatic workpiece clamping from above 2 piecesRequired space approx. 1350 mm x 1200 x 1200 mmWeight approx. 1000 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenwithout guarantee and guarantee Gksdevwfz Nepfx Akhed

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, MAKA oscillating hammer drilling machine, slot drilling machine # TYPE STV 170 Year of manufacture: 1991 Includes 2 additional drilling units and a large amount of accessories, including stops, etc. Condition: see pictures (See pictures – as is) – a prior inspection is highly recommended. Subject to prior sale. All information without guarantee. The items can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. The shipping costs are an estimate and may vary depending on the distance and weight; please inquire. The stated selling price is the net price plus VAT. Gkodpfx Akez Efwyohed An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to commercial customers without any warranty, guarantee, or right of return. All information without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, any warranty is excluded. If the offered item is a new item, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 26010607, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 5,900 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 5,900 mm, workpiece width (max.): 1,600 mm, workpiece height (max.): 280 mm, number of axes: 5, number of slots in tool magazine: 20, controller manufacturer: SIEMENS SINUMERIK, total height: 3,200 mm, total length: 11,000 mm, total width: 4,700 mm, overall weight: 10,000 kg, table length: 5,900 mm, table width: 1,600 mm, Equipment: CE marking, MAKA PE 75 5-axis machining center – in good working order and ready for use. The machine was used for the production of wooden stairs. Maximum spindle speed: 24,000 rpm Tool holder: HSK-F63 Number of milling spindles: 1 Vertical drilling spindles: 16 Horizontal spindles in the X-axis: 2 Horizontal spindles in the Y-axis: 2 Vacuum pump: 130 m³/h Number of vacuum pumps: 1 Number of traverses/consoles: 8 Pneumatic pressure: 6 bar A-axis: ±90° / 180° Gkedpfxozwcfzs Akhjd C-axis: 540° Rapid traverse X/Y: 60 m/min Rapid traverse Z: 24 m/min Electrospindle cooling: liquid Table: traversing/console type Application: wood processing / stair production.

Condition: used, Year of construction: 2008, machine/vehicle number: MC00094230, functionality: unexamined, input voltage: 400 V, Equipment: CE marking, Thickness planer MAKA / GRIGGIO DH 520/A Year of manufacture: 2008 Machine number: MC00094230 Condition: Uninspected Delivery terms: Free on truck Location: 72178 Waldachtal Availability: Immediately - by arrangement Payment terms: Prepayment - by bank transfer Internal No.: 180-2 Technical data: - Planing width approx. 520 mm - 400 V - 50 Hz Gsdpfx Akoz Rqgxjhskd - Max. 8.85 kW - Max. 2900 rpm Scope of delivery: - Without additional accessories Dimensions & weights: - Installation dimensions L x W x H approx.: 1300 x 800 x 1400 mm - Weight approx.: 785 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►On request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of all warranties. ►Technical data subject to change without notice. ►Subject to prior sale. ❗The goods are sold exclusively to businesses❗

Condition: repair required (used), Year of construction: 2005, functionality: unexamined, operating hours: 52,751 h, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, number of slots in tool magazine: 32, controller manufacturer: BWO, overall weight: 16,600 kg, controller model: CNC 920, continuous operating pressure: 6 bar, nominal power (apparent): 12 kVA, number of spindles: 1, rotational speed (max.): 20,000 rpm, rotational speed (min.): 1,000 rpm, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of the portal including unit and tool changer: approx. 15,000 kg Weight of the control cabinet: approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 liters/hour (uncompressed) Control system type: BWO CNC 920 Controlled axes + max. travel distances: approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 revolutions per minute, speed range 1,000 - 20,000 revolutions per minute Lubrication: grease lubrication Tool holder: HSK 63 F Tool magazine: chain magazine with 32 positions / 160mm Machine table: 2 clamping stations with 6 support crossbars with clamping / pneumatic clamping devices Workpiece dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° Gkedpfev Rlpyox Akhsd Currently, the machine is not operational. The spindle including the conversion kit must be replaced with newer software (can be requested from Maka). The machine can be inspected in DE94424 Arnstorf by appointment. All information is without guarantee. Sale exclusively to commercial businesses (B2B). Sale only within Europe. The buyer organizes and bears the costs for the entire dismantling, collection, loading, and transport. Inspection and collection by arrangement in 94424 Arnstorf (Germany).

Condition: ready for operation (used), Year of construction: 1995, input voltage: 400 V, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: BWO, MAKA HC 57 R (Robot) CNC Machining Center 5-Axis Type HC-57 R / Machine No. 420 747 / Year of manufacture 1995 / Circuit diagram no. 320 177 The machine is operational and exceptionally robustly constructed (milling spindle, tool changer, vacuum pump, support, etc.) and equipped with existing electronics (control unit, circuit boards, transformer). Gsdpsz R Dqqefx Akhjkd It shows age-related wear in areas such as wiring, pneumatic lines, central lubrication lines, etc. It runs and is ready for operation, but due to the above-mentioned wear, it is being offered as a source of spare parts or for refurbishment. Collection from 41334 Nettetal, workshop edge. Price negotiable. If no buyer is found for the assembled, complete machine, the machining center will be dismantled. The spare parts will then be offered individually. Interested parties in MAKA spare parts can contact us in advance regarding details or spare parts inquiries.

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Gsdjzgtyhspfx Akhskd Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, For sale is a robust MAKA/Griggio surface planer, model AH 430. The machine features a robust, heavy-duty design and is suitable for professional use in carpentry, joinery, and woodworking. Technical data / Features: Manufacturer: MAKA/Griggio Model: AH 430 Planing width: 430 mm Year of manufacture: 1994 Motor power: 4.0 kW Connection: 380 V / 50 Hz / 3 phases long infeed and outfeed tables, total length approx. 2,600 mm 4-knife cutterblock CENTROFIX system with reversible knives adjustable fence manual chip thickness adjustment via handwheel dust extraction port motor brake GS-tested for dust emissions massive and robust construction Gedjzvu Uxopfx Akhskd The machine is in used condition, which is good considering its age. The surface planer was used as a training machine in a vocational school and is fully functional. The machine is subject to differential taxation. An inspection and demonstration can be arranged by appointment. Transportation is possible for an additional fee! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes reserved. All information without guarantee.

Condition: used, Year of construction: 2012, - Work area: X: 9000 mm / Y: 2700 mm - Gantry 1: 5-axis milling spindle 20/26 kW - 32-position tool changer - Gantry 2: 2x13 spindle drilling unit Technical data - Heavy-duty gantry system with 2 gantries - Gantries with drives on both sides (gantry drive) - CNC control SIEMENS 840D sl / PCU 50 with NCU 730 - Operator panel OP 15 with 15" display, mounted on a guide rail along the longitudinal axis Work area / machinable cube size with tool length/diameter of 160 mm - X-axis: 9000 mm with both gantries - Y-axis: 2700 mm - Z-axis: (Standard cube size 420 mm) - Customer-specific design for workpiece thicknesses up to 60 mm - 5-axis head Equipment, Gantry 1 - 1 universal head for 5-axis milling - Milling spindle power: 20/26 kW (S1/S6) - Speed adjustable up to 24,000 rpm - Water-cooled - Tool interface HSK F63 for automatic tool changes - Thread cutting is possible! - 1 chain-type tool magazine with 32 positions - With rotary gripper for fast tool changes - Magazine fixed on the operator side Equipment, Gantry 2 - 2 head mounting brackets - Equipped with 2 heavy-duty multi-spindle drilling units each - With common dust extraction hood - Each drilling unit with 13 drilling spindles (total of 26 drilling spindles) - Individually selectable vertically - Arrangement in an L-shape - 2 angled drilling spindles adjustable from 0 - 25° - 1 right, 1 left, each approx. 2.2 kW, n= 2800 rpm - Drill chuck collet Rego Fix ER 25 M Machine table - Base frame with linear guide - 12 table traverses on a linear guide for positioning in the X-direction, individually driven and positionable via NC drives - Vacuum supply integrated into the table traverse - Each traverse is individually vacuum-monitored and linked to the machine control system Workpiece infeed function - 1 belt conveyor consisting of 4 belt strands - Width 40 mm, each traverse with lifting devices - Lifting device NC-controlled - Stroke 110 mm (+10 mm, -100 mm) - The machine should be installed in a foundation pit of approx. 300 mm Gkjdpfx Aezuw Ixekhsd - Vacuum pump Bush type: Mink MM 1322 - Suction capacity 250 m³/h - With intermediate tank 500 l for rapid vacuum generation - 2 chip transport belts under the machining area for the removal of chips and/or small swarf up to a size of max. 100 x 100 x 100 mm - Automatic central lubrication Work safety - Moving protective cabin on both gantries - Protective cabin with safety bumpers and safety light curtain system on the operator and rear sides (due to automatic table adjustment)

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - rigid milling spindle; newly bearing-mounted - with table extension with extendable frame support 2500 mm Gkedpfxjzlbpuo Akhod - motor 5.5 kW - speeds 3000/4500/6000/8000/10000 rpm - milling fence with 2 adjustment options: - full fence - rear outfeed jaws - extraction hoods: 2 x 120 mm - automatic motor brake - clockwise/counter-clockwise rotation - with Haffner feed unit with 4 rollers Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: excellent (used), Spindle: 40 mm / 30 mm • Motor power: 7.5 kW • Table length: 250 cm Godpfxsyxnxls Akhokd • Table width: 80 cm In very good condition.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 82,340 h, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 420 mm, spindle speed (max.): 18,000 rpm, overall weight: 24,000 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 5, This 5-axis MAKA Moving Beam with 840D was manufactured in 2013. It features a Siemens Sinumerik 840D control unit and a nominal power of 55 kW. With its advanced capabilities, this gantry milling machine is ideal for precision machining tasks. If you are looking to get high-quality milling capabilities, consider the MAKA Moving Beam with 840D machine we have for sale. Contact us for further details. - 2 units available- Control Unit: Siemens Sinumerik 840D- Number of Axes: 5-Axis (X, Y, Z linear axes and A, C rotary/swivel axes)- Pneumatic Operating Pressure: 6 bar- Control Voltage: 24 V- Nominal Power: 55 kW- Nominal Current: 145 A- Foundation Requirement: Reinforced concrete floor, quality EN 206, load capacity 2500 kg/m²- Workplace Lighting: Hall lighting of 250-500 Lux required- Ambient Operating Temperature: 10-35° Celsius- Operating Voltage: 400 V / 50 Hz AC- Pneumatic Connection Thread: ½"- Pneumatic Supply Line: Clearance width min. 1"- Compressed Air Quality: Drained and cleaned- Compressed Air Consumption: approx. 800 NI/h uncompressed- Noise Protection: Machine completely enclosed in a soundproof booth, interior illuminated. Sound insulation max. 20 dB(A) in medium to high frequency range with booth closed.- Safety Measures: Fully enclosed soundproof cabin, safety bumpers on the front edges of the tables, safety contact strips on the closing edges of the automatic sliding doors, limit switch protection on all sliding and hinged doors, movable partition between the tables. Gkodpfx Akezd Dfvehod

Condition: repair required (used), Year of construction: 1989, machine/vehicle number: 426578, functionality: unexamined, power: 16 kW (21.75 HP), input voltage: 380 V, input current: 32 A, input frequency: 50 Hz, number of axes: 5, number of slots in tool magazine: 24, controller manufacturer: Num, total height: 3,000 mm, total length: 10,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, table length: 7,000 mm, table width: 2,000 mm, We offer this used MAKA KPF-6200 machining center, manufactured in 1989, as a source of spare parts. Gkodpfxsz Hlhns Akhsd Type: KPF-6200 Machine No.: 426578 Year of manufacture: 1989 Pneumatic pressure: 6 - 8 bar Hydraulic pressure: 180 bar Rated voltage: 380 V Rated frequency: 50 Hz Control voltage: 24 V Rated power: 16 kW Rated current: 32 A Wiring diagram no.: 3.96 - 123 Condition: in need of repair (used) Functionality: untested Tool changer in need of repair without milling cutters Sold as a source of spare parts The Num control unit with the switch cabinet is still functional. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Gkjdpfx Aksvr A A Tehjd Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced.

Condition: good (used), Year of construction: 2001, functionality: fully functional, CNC-controlled machining center for 5-axis machining CNC control Control type: bwo CNC 900 C, 512 KB RAM, PC 80486, 1 GB HD Controlled axes Travel distances: 14000 x 3300 x 200 mm Units Type designation: Milling motor HSK 63F Cooling: Water cooling Power: max. 20 kW Speed range: 1000-17000 min-1 Lubrication: Grease lubrication for 2000 operating hours Tool holder: HSK 63F Type designation: Chain tool changer Number of positions: 32, of which 4 are equipped with a torque support for holding angle/probing heads Holder: HSK 63F Diameter: 90 mm / arranged 160 mm Gkjdpfx Asy S Hahjkhed Tool length: 160 mm Workpiece cube dimensions X-axis: max. 3300 mm Y-axis: max. 14000 mm Z-axis: 200 mm A-axis: +270° rotary axis B-axis: ±98° swivel axis

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Gkjdpfsvmywqox Akhed Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: used, Year of construction: 2000, Used machine MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. Godjv S Dn Dspfx Akhekd 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Various tools and tool holders can be taken over by agreement. The machine can be inspected in Hermaringen.

Condition: used, Year of construction: 2003, Carriage length: 3000 mm Cutting width at rip fence: 1250 mm Cutting width at cross-cut fence: 2800 mm Cutting depth: 125 mm Scoring unit: no Saw blade height adjustment: handwheel Saw blade tilt adjustment: handwheel Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: - Rip fence display: scale Cross-cut fence display: scale Saw blade diameter: 400 mm Speeds: 3200 / 4000 / 6000 Motor power: 5.5 kW Motor brake: yes / automatic Extraction port: 80 mm and 125 mm Machine length: 3400 mm Godpfx Akoy A Hi Dshjkd Machine width: 1800 mm Weight: 820 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. Gksdpjvmpx Refx Akhsd - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Gsdpsv Hm Nmofx Akhskd Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: ready for operation (used), A Maka 5-axis CNC machining center for aluminum, plastic, or wood in need of repair is offered. Travel path X/Y/Z: 2500mm/1500mm/650mm, max. fixture height: 180mm, rapid traverse X/Y/Z: 60m/min, C-axis rotation: 540°, A-axis swivel: +/-98° (196° total range), number of work tables: 2, table size per table: 2500mm x 1500mm, magazine capacity: 20 tools per magazine, total tool positions: 2x20. The drive motor of the Z-axis is defective. Inspection possible by appointment. Gksdezcyq Hspfx Akhjd

Year of construction: 2005, condition: ready for operation (used), A Maka CNC 4-axis milling and drilling machine for plastic, wood and aluminum is available. Travel X/Y/Z: 2000mm/6000mm/250mm, C-axis: 360°, rapid traverse X/Y/Z: 45m/min/45m/min/24m/min, spindle mount: HSK63, spindle power: 12kW, spindle speed: 24000rpm. Tool places: 12, angle head places: 3, machine dimensions X/Y/Z: 12000mm/5700mm/3200mm, control: BWO 920, documentation available. On-site inspection is possible. Gkjdpfxovmq Tvo Akhod

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 12100mm/2350mm/800mm, swivel A-axis: +/-98°, rapid traverse X/Y/Z/A: 45/45/24/10 m/min, processing length: 11000mm, speed: 24000 rpm, table: 10 support crossbars, 2 hydraulically swiveling workpiece stops, control: BWO 930, operating hours: 23792h, dimensions X/Y: 18300mm/6250mm. Including moving gantry version with Gentry drive on both sides, coolant spraying system with minimum quantity fine atomization. Documentation available. Gedpfxstqfqxo Akhskd

Condition: excellent (used), Year of construction: 1995, upon request Gksdpsfxgmgefx Akhed