Used Material Feeder for sale (17,622)

Condition: used, Year of construction: 2014, Sennebogen material handler 835    • 11,376 operating hours    • 6-cylinder water-cooled engine    • Dutch machine    • Equipped with central lubrication    • Solid rubber tires    • 4 stabilizers    • Cameras for all-round visibility    • Joystick control    • 2 units available! Condition: Used Todpfew Uq Dzox Adlsf Year of manufacture: 2014

Condition: used, GENERAL INFORMATION Comments: Internal width: 5,940 mm • Internal depth: 2,000 mm • Internal height: 2,000 mm • Exterior walls and roof: trapezoidal galvanized sheet metal • Interior walls: trapezoidal galvanized sheet metal • Interior ceiling: trapezoidal galvanized sheet metal • Floor: wooden floor made of tongue-and-groove planed boards • Roof drainage: via longitudinal gutters • Door type: double-leaf door Tsdexqdpujpfx Adlsf Total width: 2,170 mm Total height: 2,150 mm Total length: 6,080 mm Location: Bremen Condition: used

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each Tedpsua Nngefx Adlsf - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: used, Year of construction: 2022, - FANUC 0i-TF CNC Control - 60° slant bed - Cross slide with linear guides - Part separator - Coolant unit - Chip conveyor - Power on time: 2775 h - Machining time: 743 h - Year of manufacture: 2022 LNS Sprint 552 - Bar feeder - Bar diameter: 5 - 52 mm - Bar length: 3200 mm - Loading capacity: 11, 9, 8 bars Specifications Main spindle: - Bar capacity diameter: 32 mm - Max. spindle speed: 5000 rpm - Collets DIN6343: 171-E A36 - Collets DIN6343: 161-E A25 Working area: - Workpiece diameter/length: 32 / 75 mm - Travel in X: 300 mm - Travel in Y: 175 mm Tjdewrp Dpspfx Adlef Cross slide "Gang Type": - Rapid traverse X: 12 m/min - Rapid traverse Z: 20 m/min - Number of tools: 7 - Tool shank diameter: 20 mm - Tool holder (square): 12 x 12 mm Coolant system: - Coolant pressure: 6 bar - Tank capacity: 100 l Performance data: - Power 100%/40% DC: 3.7 / 4.4 kW - Torque: 20.2 Nm - Energy consumption: 5.4 kWh - Total power: 8.8 kW - Operating voltage: 400 V - Rated current: 16 A Dimensions & weight: - Footprint: 1900 x 1030 mm - Weight: 1230 kg

Condition: excellent (used), Material receiver for sander or planer Total length: 4500 mm Tedex Ahhrspfx Adlef Total width: 120 mm Pneumatic discharge Roller width: 260 mm

Condition: good (used), Used machine, good condition. Delivery time appr. 16 weeks after ordering Basic machine starts at 139.700 € net *Options at additional cost, see below Briquetting press e.g. for wood dust, spelled husks, activity material (e.g. for pigs to play and nibble around), animal feed, lucerne or wood shavings. *Optionally, short briquette tablets can be made Technical specifications: Throughput capacity up to a maximum of 750 kg/h (depending on the material) (e.g. sawdust with a bulk density of 250 kg/qbm) An exact statement about the throughput is only possible after a test with your material. Can vary greatly depending on the bulk density of the starting material. Goods tariff number: 84793010 Briquette Ø 65 mm including 2 m press channel Engine power main engine 37 kw Feed screw geared motor 2.2 kw Compressor screw 5.5 kw Hydraulic pump motor 0.37 kw Total connection value: approx. 47 kW Control panel with plain text display for operating states and utilization indicator for the main drive and feed screws PLC control with operating hours counter in the control cabinet Machine has CE mark Automatic start-stop function Dimensions 3100x860x1800 mm lxwxh Weight 3800kg Options at extra cost: Temperature control unit for the pressing tools to maintain the temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat Wired ready for connection - absolutely necessary for operation Todpfx Adefmqq Eslsf including the corresponding control + €7,850 net guillotine or pill crusher, for cutting the briquettes to length + €6,900 net Necessary for compressed air connection! Silo for MAP series + €19,940 net - Storage silo above the machine - Content approx. 6 sqm, stable steel construction with agitator discharge and level indicator. Transport line / cooling section (nominal value: 4x2m) each 2 meters 990 euros net Control System 4.995 € net Assembly / commissioning (nominal value approx. 2-3 days on site) according to expenditure on proof against separate calculation. The following sentences apply: Service technician/mechatronics technician per hour of assembly and travel: €129.00 Overtime: 25% surcharge 50% surcharge for each Saturday and night hour 100% surcharge for each Sunday and holiday hour Release per mechanic per day: depends on the country Per car and van and driven kilometer: 0.98 € / km Arrival and accommodation against receipt or flat rate billing at the expense of the client. . Test with the respective customer material: (by arrangement, up to a maximum of 750 kg) - 1,970 € net . Raw material requirements: - The moisture content (atro) must be between at least 6 and a maximum of 15% - Maximum chip length 18 mm - Installation temperature: room with a temperature of at least +5°C - The charge must be free of metals and mineral impurities. This can result in damage to the pressing tools and/or increased wear

Condition: used, functionality: fully functional, 2 x Händle BKS-1506 Box Feeders / Bunker / Feeding Hopper Box feeder BKS 1506 from Händle equipped with a steel plate apron conveyor and large extensions (25 cbm capacity). Tjdpfoxx Tcgsx Adljf Features two independently driven tearing shafts for processing challenging material. Suitable for clay, cohesive materials, substrates/humus, waste, etc. 2 units available. Control system (new) available upon request. Price on request.

Condition: used, Sturdy feed hopper Working area: 800 x 2,200 mm Electric motor, gearbox, eccentric reduction gear on a sturdy base frame Tjdou Dhncepfx Adlof

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder RNA Vibratory bowl, sorting device / Screw feeding system with vibratory feeder for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Tedpfx Adjxrgvmjlof Control voltage: 24 Volt DC (external power supply required) Power connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24VDC power supply). - REO controller type REOVIB R6 / 439 for adjustable vibration speed - The feeder was used for feeding automotive blade fuses - Mounted on base frame made from aluminum profile system Required space Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two main components: 1) Sorting bowl, in which the parts are aligned 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations and thereby moves the parts.

Condition: used, Year of construction: 2000, Book block feeder Solema Fastbook + Autoload Todpfxswwg T Es Adljf Year: 2000 This automatic book block feeder can be used with hard cover book lines, perfect binders or back gluing machines, etc. - Autoload

Condition: ready for operation (used), Year of construction: 2004, ARBURG Thermolift 100-2 – Dryer and Material Loader – 70 L – 6.2 kW – Made in Germany For sale: a reliable device for plastics processing – ARBURG Thermolift 100-2, fully operational and ready for immediate use. Manufactured in October 2004, industrial-grade build, German quality. ● Bin capacity: 70 L ● Year of manufacture: 10/2004 ● Supply voltage: 400 V / 3 phase / 50 Hz ● Heating power: 4.5 kW ● Blower: 1.68 kW ● Total power requirement: 6.2 kW ● Weight: 200 kg ● Model: Thermolift 100-2 Tjdpevi H Stefx Adlsf ● Serial number: 304380 Complete unit with electronic controls, mounted on transport casters. Excellent solution for use with injection moulding machines. Very good visual and technical condition.

Year of construction: 2025, condition: new, Material support stand No. 100006, height 650-1050 mm, powder-coated, RAL 7011 Tedpfoxqrghsx Adljf

Condition: good (used), Year of construction: 2007, Bar magazine Breuning Irco Bars up to 42 mm diameter and 3000 mm length Todpfxexxb S Aj Adljf

Condition: used, Year of construction: 1988, A fully automatic band saw with hydraulic material feed is for sale. Manufacturer: Amada Model: HA 250 Year of manufacture: 1988 Location: Bremen Tedpfsxrtr Ijx Adljf The machine was stored in fully functional condition as a backup unit in case another saw failed. It has not been used since and the warehouse is now being cleared. _____ Our general terms and conditions apply; in addition, the seller assumes no liability for typographical or data transmission errors. The information and images have been provided to us by the owner and authorized for publication. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the items offered are appropriate for their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Tsdpfx Adswvv Rqjljf Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Good condition

Condition: good (used), Planing width 20-230mm Planing height 8-160mm Number of heads 6 Arrangement of heads Tjdovbwzvopfx Adlef Bottom Right Left Right Top Bottom Drawing rollers in work table 4 Pneumatic pressures hydraulic feeder

Condition: good (used), Koch material separator 24 Volt Todpfx Asv Rcntjdlof price: 790 € contact: Mr. Rainer Eckerle

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser power: 100 W, laser wavelength: 1,070 nm, empty load weight: 1,200 kg, number of axes: 4, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Fibre Laser: Power: 100 W Wavelength: 1070 nm Number of axes: 4 Tsdpfxextmx Ds Adljf MACHINE DETAILS Dimensions & Weight Machine dimensions (L x W x H): 160 x 140 x 170 cm Machine weight: 1,200 kg Bar Feeder Model: Iemca Elite 112 / Type: 32LL Bar feeder year of manufacture: 2010 Bar feeder dimensions (L x W x H): 420 x 60 x 140 cm Bar feeder weight: 500 kg EQUIPMENT Iemca Elite 112 bar feeder

Condition: excellent (used), Matrix 530DP Double-Sided Pneumatic Laminator with Omni-Flow Feeder Price: Contact for pricing Location: Glendale, UK Availability: In stock – ready to ship Condition: Refurbished by trained engineers – Excellent condition, perfect working order Overview Boost your print finishing with the Matrix 530DP double-sided laminator, fully refurbished and tested by our trained engineers. Designed for professional print rooms, this automated laminating system includes the Omni-Flow Automatic Sheet Feeder, digital foiling/sleeking unit, and silent air compressor. It’s the perfect solution for short, medium, and long-run lamination and foiling. Key Features Tjdpfxew Tlk Ts Adlof Professional double-sided lamination up to B2 size (510mm width) in a single pass – saves 50% production time over single-sided models. Omni-Flow Automatic Feeder with deep pile (180mm capacity), handles sheets up to 460mm x 9000mm and stock up to 400gsm. Automatic sheet separation with lamination speeds up to 10 metres per minute. Digital foiling and sleeking unit for premium finishes: foil, holographic, glitter, and Spot UV-style effects. Silent pneumatic compressor for consistent roller pressure without noise disruption. Refurbished and serviced for excellent condition and reliable performance. Included in Package Matrix 530DP Double-Sided Laminator Omni-Flow Automatic Sheet Feeder Foiling/Sleeking Rewinder Silent Air Compressor Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert operator training and ongoing support – we help you get the best results from your equipment. Competitive pricing on consumables – keep running costs low with our affordable supplies. Established, trusted supplier – years of experience serving the print and finishing industry. Specifications Manufacturer Vivid Model Matrix 530DP Double Sided Laminator with Omni-Flow Sheet Feeder Condition Refurbished Stock Number 114957 Sheet Feeder Yes Pneumatic Pressure Yes Air Compressor Yes Max Speed 10 metres per minute Max Sheet Size 460mm x 740mm (550mm width in hand feed) Feeder capacity 180mm Paper Thickness 100-400gsm Warm Up Time 10 minutes Temperature Range 0-140°C Power Supply 32amp 220/240V. Dimensions (L)1800mm excluding exit tray x (W)860mm x (H)1600mm Machine Weight 380kg (Matrix & OmniFlow)

Condition: excellent (used), 1 x Packaging machinery powder feeder. Located Melksham, Lift out £20. UKFM1-6804 Tjdpfx Adoxgg Tueljf

Condition: used, Bleach & Fabric Softener Raw Material Intake & Production Plant 132,000 tonnes per year maximum bleach production capacity 27,000 tonnes per year maximum fabric softener production capacity Raw material reception & tank farm storage 36x Carlier and FIPP 50m3 composite vertical silos 150m3 sodium hypochlorite composite vertical silo Alliance Inox Industrie 49,500L stainless steel vertical silo Including pumps, pipework, instrumentation, hot water, softened water tanks and water treatment plant Product mixing facility Sirech Hostier 1,600L stainless steel premixing tank 3x Alfa Laval 11,500L stainless steel vertical mixing tanks Tsdpfxexr Am Ie Adlof 3x Alliance Inox Industrie 25,000L stainless steel vertical product holding tanks 6x Barriquand plate heat exchangers Pumps, pipework, manifolds & instrumentation throughout Chilled water system with CIAT chiller, chilled water tank & Barriquand plate heat exchanger Thick bleach production system including 2x composite tanks

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, bar length: 3,000 mm, bar diameter (max.): 20 mm, total length: 3,970 mm, total width: 480 mm, overall weight: 850 kg, Bar feeder with robust construction and easy operation! Designed for efficient production processes! Tedpoxp Nhyefx Adlef TECHNICAL DETAILS Diameter range: 2 mm to 20 mm Bar channel: 22 mm Maximum bar length: 3,000 mm MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 3,970 mm x 480 mm x 1,250 mm Weight: approx. 850 kg EQUIPMENT Integrated loading ramp with a capacity of 240 mm Special system in the guide channel to prevent material deflection Automatic opening of the guide channel during material feed Robust construction

Year of construction: 2006, condition: good (used), material conveyor MOTAN BCB 75 A HBS 7,5 kW, year: 2006, price: 3.100 €, contact: Mr. Rainer Eckerle Tedpfxsd Ewc Ae Adlof

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 880 kg, Specification: Protection rating: IP54 Tedpfxjwq R Rho Adlef Control voltage: 24V DC Fuse: 16A Power: 0.5kW The hydropneumatic press with feeder from Tox Pressotechnik is a versatile and efficient solution for the precise and reliable processing of a wide range of materials. By combining hydraulic power and pneumatic control, it allows for uniform force transmission as well as fast and controlled operation. The integrated feeder ensures a smooth material flow, increasing productivity and optimizing the production process.

Condition: good (used), material tank - 6.000 liter V2A, price: 2.900 €, contact: Herr Rainer Eckerle Todpfx Adsbbkhnslsf