Used Material Feeder for sale (18,060)

Condition: used, Spectro SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx for professional metal and alloy analysis. The device is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, as well as various non-ferrous alloys. It is a proven industrial instrument widely used in foundries, laboratories, and quality assurance departments. Technical Data: Device Information: Device type: Optical Emission Spectrometer (OES) Manufacturer: SPECTRO / AMETEK Model: SPECTRO MAXx Design: Benchtop device Electrical Specifications: Power supply: 115 / 230 V AC Frequency: 50 / 60 Hz Power consumption during measurement: approx. 400 VA Power consumption in standby: approx. 180 VA Fusing: 16 A (slow-blow) Gas Supply: Operating gas: Argon (Ar) Argon purity: min. 4.8 (99.998%) Input pressure: approx. 7 bar Argon consumption: Stand-by: approx. 6 l/h Constant operation: approx. 23 l/h Analysis mode: approx. 200 l/h Ambient Conditions: Operating temperature: +10 °C to +30 °C Humidity: 20–80%, non-condensing Dimensions & Weight: Dimensions (W × D × H): approx. 600 × 740 × 460 mm Weight: approx. 60 kg Kjdpsybcfkjfx Ahzowt Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photos) - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals & software media (Errors and changes in the technical data, as well as prior sale, reserved!) If you have further questions, we are happy to answer them by phone.

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press Kwjdpfx Ahjitdikszet -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Condition: used, tank capacity: 1,500 l, GENERAL Design: Container Remarks: Frame made of V2A/V4A; manway diameter approx. 455 mm; one opening at the cone end, diameter approx. 600 mm (closure for this opening is missing) Overall width: 1,200 mm Overall height: 1,890 mm Overall length: 1,200 mm Location: Bremen Nameplate: Volume: 1,500 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Kwodpfx Aeyclv Iehzjt Last application: pharmaceutical industry TANK Bottom: conical bottom Support type: frame EQUIPMENT Manhole/Dome: in the top head Note: manhole cover is missing

Condition: used, tank capacity: 590 l, GENERAL Design: Container Remarks: Frame made of V2A; Internal dimensions approx. 1100 x 700 mm; Wall height approx. 710 mm; Outlet approx. 100 x 100 mm with plastic components (presumably Teflon); Outlet design may vary on some containers (see last 3 photos) Total width: 810 mm Total height: 1,200 mm Total length: 1,230 mm Top: Open with loose cover Location: Bremen Kwodpfx Ajyck Dwohzst Volume: 590 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: Pharmaceutical TANK Bottom: Conical bottom Supporting structure: Frame EQUIPMENT Note: Signs of use

Condition: used, tank capacity: 760 l, GENERAL Kwsdpfsyci Nxsx Ahzot Equipment: Disc valve Design: Container Remarks: Frame, Fe (galvanized); Cleaning certificates available; Disc valves not present on all containers, some only with flanged closing caps (see photos); Housings of disc valves made of aluminum Overall width: 1,050 mm Overall height: 1,710 mm Overall length: 1,250 mm Location: Bremen Nameplate: Volume: 760 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last application: plant protection chemicals TANK Bottom structure: eccentric conical Support type: Frame EQUIPMENT Manhole / dome: on top head (DN 400) Outlet: 250 mm Note: Signs of use

Condition: good (used), Item: D-1035-Double bulk feeder with weight Stainless Steel double bulk feeder with weight. Kedpfxsd Nk Ucs Ahzswt Dimension: Vat L 1800 X W 850 X H 1300 mm Bigger lift: 460 mm, Small lift 100 mm, flight 80 mm L 2700 + weight 500 mm , Total L 3200 mm

Condition: good (used), power: 100 kW (135.96 HP), fuel type: diesel, Year of construction: 2014, operating hours: 13,725 h, General information Year of manufacture: 2014 Technical information Number of cylinders: 4 Empty weight: 23.000 kg Dimensions (LxBxH): 865 x 255 x 316 cm Functional Mast length: 9 m Kodpfeycl S Nex Ahzewt Condition Technical condition: good Visual appearance: good Financial information Price: On request Other information Emissions class: Stage IIIA Additional information Please contact Ferdinand Pater for more information

Condition: good (used), fuel type: diesel, Year of construction: 2014, operating hours: 9,535 h, Year of manufacture: 2014 Field of application: Construction Drive: Wheel CE mark: yes Ksdpfxsx Dzdve Ahzowt Technical condition: good Visual appearance: good Serial number: 074209 Please contact Ferdinand Pater for more information

Condition: used, functionality: fully functional, With this offer, you are purchasing a used A3 colour printing system ‘Ricoh IM C4510A’. Item for sale: 1 x Ricoh IM C4510A with the following equipment: Includes output finisher Includes 2-compartment cassette cabinet Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 29,251 pages Colour: Approx. 19,903 pages Black: Approx. 9,348 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Kwedsyam D Iopfx Ahzet Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track - Excl. chain Kwodpex Tdpiofx Ahzst - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 Kedsx Tdn Sjpfx Ahzjwt - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: Kwjdpsx Tdn Eefx Ahzst - Horizontal signature feeders: 1 - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 Kjdjx Tdnxspfx Ahzewt - Incl chain track - Excl. chain - Excluding pump(s)

Condition: used, Year of construction: 2004, Heidelberg TAL 400 Year: 2004 Description: - Horizontal signature feeders: 1 - Incl chain track Kwedpex Tdmuefx Ahzot - Excl. chain - Excluding pump(s)

Year of construction: 2024, condition: used, New: Yes Please contact us for more information. Kwsdeyawrcjpfx Ahzot

Year of construction: 1998, condition: good (used), Part of an old direct extrusion line for pipes (which is also still available). This machine is supplied with the following components: - 4-component Colortronic dosing system (new control installed in 2017) Kwodpfx Ahox S Rimjzst - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control system for dosing and extruder - Single-circuit oil tempering - Maag melt pump

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit Kedpfxsx Up Igs Ahzewt - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... Kwsdpfx Ahjx Td Ilszet -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Condition: good (used), Year of construction: 2009, operating hours: 15,100 h, Year of manufacture: 2009 Field of application: Construction Drive: Wheel Empty weight: 21.000 kg CE mark: yes Kwjdpfx Ahox Hk S Rozot Technical condition: good Visual appearance: good Please contact Ferdinand Pater for more information

Condition: good (used), power: 135 kW (183.55 HP), fuel type: diesel, color: green, Year of construction: 2007, operating hours: 12,287 h, Year of manufacture: 2007 Ksdot Dlxkspfx Ahzewt Drive: Wheel Empty weight: 27.500 kg Dimensions (LxBxH): 1110 x 275 x 330 cm Technical condition: good Serial number: 825.0.1055 Please contact Ferdinand Pater for more information Stock no. D33 Machine Brand Sennebogen Type: 825M D-series Weight: 28 Ton Serial number: 825.0.1055 Building year: 2007 Worked hours: 12287 Engine: Deutz TCD 2012 L06 2V 135kW Engine no. 10371260 Boom: K13 configuration, Boom = 7,4 m. and Stick = 5,8 m Safety check valves on boom and stick cylinders Cabin: Maxcab D270, Hydraulic Cab Riser, 2,7 m. in height. Upper carriage: Standard Sennebogen color, central greasing system Undercarriage: Mobile MP26, 4 points outrigger, 8 full rubber tires 10.00-20 Lights: Several lights on boom, stick and cabin Extra: Generator set Dimentions: LXBXH 11,10X2,75X3,30

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Kwodpfxsx A U Nce Ahzet Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz Kedjhlnzkopfx Ahzewt - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 122, Cover folder feeder, Minimum case size: 140 x 308 mm, Maximum case size: 485 x 1002 mm, Maximum mechanical speed: 1,000 - 6,000 cycles/h, Minimum case weight: 200 g/m², Maximum case weight: 400 g/m² Kjdpfx Ajx Apfrohzswt

Condition: used, Year of construction: 2002, functionality: fully functional, Used Kora Packmat friction feeder. Originally supplied by Nodema to the only customer who used this feeder. Taken back in working condition and ready for use again. Kwjdpfx Ajx Tuiashzot

Condition: ready for operation (used), Screening machine Eirich for fine materials Brand: Eirich Surface: 3000 x 1600 mm – 1 Deck Kjdporcxxijfx Ahzowt Driving: 4 kW E-motor On stock: 2 pieces.