Used Material Separators for sale (21,622)

Condition: used, Magnetic Separator, Eddy Current Non-Ferrous Separator, Metal Sorting Conveyor, Magnetic Separator, WAGNER MAGNETE 0428-25/60, used machine Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 284956 Nodpezv S A Tefx Abuslh Weight: 1100 kg Electrical data: 400 V Belt dimensions: 1340 × 650 mm Overall dimensions: 2480 × 1850 × 1040 mm Design / Material: Robust industrial steel frame, with high-speed internal magnetic rotor and conveyor belt Conveyable / Separable material: Recovery and separation of metallic and non-ferrous metals (aluminum, copper, brass, bronze) from bulk material flows (waste, e-waste, shredder residue, glass) or any type of material from which magnetic particles/materials need to be separated

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Nlsdoppyhtopfx Abueh Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: excellent (used), Kongskilde cyclone separator with rotary valve For sale is a Kongskilde cyclone separator, including an installed rotary valve with gear motor and connecting hose. This unit is suitable for separating and discharging chips, granules, dust, or similar materials in dust extraction and conveying systems. The cyclone is mounted on a sturdy frame and stands on a transport pallet. Nodpjzrlznefx Abuelh Scope of supply as shown in the photos: Kongskilde cyclone separator Rotary valve with drive Frame Connecting pipe and flexible hose Inspection at our warehouse is possible by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: good (used), Pulsotronic magnetic separator (operating manual available) Magnetic separator for use with, e.g., material vacuum cleaners Nodpod Dpvhefx Abuolh New price: €4,850

Condition: new, The ideal addition to your grinding/deburring machine (we also have the suitable deburring machine in stock!): Ulmatec Wet Separator Extracted materials: steel / stainless steel / aluminium, dry dust All water-contact parts made of stainless steel. Control via display. Motor: 7.5 kW, 400 V, 50 Hz, IE3 Njdpfx Absx Diiajuslh Max. airflow: approx. 11,000 m³/h Max. negative pressure: approx. 4,000 Pa Inlet diameter: Ø 355 mm Discharge: Drain valve Filling: Automatic via solenoid valve Included: HEPA post-filter (for stainless steel processing) ATEX version (e.g. for aluminium processing) Excluding piping Maximum distance between extraction unit and machine: 10 m Connection to the on-site supply network is to be carried out by the customer.

Year of construction: 2026, condition: new, We also offer leasing and financing options. Feel free to contact us! For all recycling needs, we have shredders and other recycling machines in stock in Heilbronn! From copper recycling to plastic recycling, you can purchase all machines from us. Just ask! With Josan & Söhne Maschinenbau: Profitable copper processing! ‼️ We are happy to give you a live demonstration of the machines in Heilbronn! By appointment only! ‼️ We are a German company based in Heilbronn, operating under German law, with warranty and service! We also speak English! We are happy to advise you on all recycling matters! Material separation in all recycling applications – just ask us. Electrostatic separator for separating plastic or synthetic materials from copper, iron, or other metals. You can also separate plastics from metals in uPVC windows, or separate plastic from sand or different types of plastics. ➡️ Motor: 6.59 kW ➡️ Dimensions (LxWxH): 4000 x 1400 x 3000 mm ➡️ Weight: approx. 1,000 kg ➡️ Throughput: 150–300 kg per hour Price on request! Subject to errors and prior sale. Nsdpfx Asqvmpfobuolh Pictures, prices, and specifications may differ.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, TECHNICAL DETAILS Nodpfx Abozzp I Rjuelh Process and Feeding Low rotational speed Single-screw feeding system Gentle processing of raw materials Preservation of fiber and texture in the end product Application Area Suitable for red meat, poultry, pork, fish, fruits, and vegetables Machine Design Compact design with a small footprint Control elements mounted directly on the machine Versatile for use with different raw materials Product Quality Gentle separation for a high-quality, minced end product Preservation of fibers and texture EQUIPMENT Control unit arranged directly on the machine Single-screw feeding system Compact machine construction

Condition: good (used), Included in the delivery: 01x Standard separation bar, used Material color: Sendzimir galvanized Total length: approx. 2,440 mm Separation bar length: approx. 2,365 mm Total height: approx. 65 mm Separator height: approx. 38 mm Profile: 25 x 35 mm (H x W) Single-sided protective cap Weight per piece: approx. 2.19 kg Nedpfx Aboyk E T Nouelh Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Should transport or shipping be required, additional costs will apply. These can be queried separately with us, depending on the delivery location or scope of delivery.

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Nedpfjif Sg Ssx Abuslh Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Year of construction: 2008, operating hours: 10,795 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 330140 / 0201, TECHNICAL DETAILS Engine power: 103 kW (140.04 hp) MACHINE DETAILS Total weight: 22,800 kg Nedpfxj Afivas Abujlh Fuel type: Diesel Operating hours: 10,795 h

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Njdpjwwt Tlsfx Abuelh Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Condition: good (used), Extraction, filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator -Ventilation grille: louvered grille, Filter for oil mist separator -Material: aluminum -Total dimensions: 440/330/H345 mm -Weight: 13.8kg Nlodpfxoi I Hc Hj Abueh

Condition: used, This listing is for a SWECO PH06 Pharmaceutical Separator with matching SWECO Adjust-A-Vibe Control SELLERS NOTICE: If you have a competing quote for the item, we will always try to beat it. Items are ‘sold as seen’. ID: FFFF049 Nljdpfx Abjxzia Houeh Listing name: SWECO PH06Y2 Pharmaceutical Separator

Condition: ready for operation (used), Year of construction: 2011, Compact cable recycling machine, specifically designed for processing telecommunications, automotive, electronic, and other cables with small cross-sections. The unit consists of a granulator and a separator for use with copper or aluminum cables. The machine dry-separates the insulation from the metal using an air-vibration table. Manufacturer: I.R.S. ITALIA RECYCLING SYSTEM S.R.L. Name/Model: KOMBI Type: PLANT Supply voltage: 400 V Nlodpe Afpc Tefx Abuoh Year of manufacture: 2011 Power: 22 kW Capacity: 180-220 kg/h Dimensions: 2835x1570x2310 mm Technical condition: used machine, very good condition.

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Nlodpfx Aochuvrobueh Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, Description Solid/liquid separation unit based on a centrifugal sifter (Centri-Sifter): solids are conveyed along the basket/screen by a paddle, while the liquid is separated and discharged through a dedicated outlet. Adjustable inclination to optimize residence time and separation efficiency. Sold with a 1000 L hopper and a flexible screw conveyor. In like-new condition (used only for testing), fully functional, and available immediately. Nodezc H H Ijpfx Abuelh Main equipment – Centri-Sifter • Type: centrifugal sifter (liquid outlet + solid outlet) • Construction: 304 stainless steel • Basket/screen: wedge wire basket (304 stainless steel) • Paddle: “expanded 7.5°” (304 stainless steel) • Safety: inspection door with interlock (operator safety) • Weight (machine): ≈ 220 kg • Purge air/gas (seals): clean/dry/filtered air/gas required Motor (motor plate) • Motor 3~: 2.2 kW, 50 Hz, 230 V Δ / 400 V Y • Speed: 1450 rpm (50 Hz) • Protection / efficiency: IP55, IE3 • Mounting: IM B35, service S1 Included equipment (sold with) 1) Hopper • Volume: 1000 L • 304 stainless steel, open design, “food grade” finish (Type C Plus) • Level probes: high + low • 30° outlet 2) Flexible screw conveyor • Supplier: Spiroflow Ltd • Model: 146SH • Length / inclination: 3 m 30° • Outlet: Ø300, 30° standard • Components: reverse bung / drop trap / QR flanges (quick disassembly) Price and conditions • Availability: immediate • Location: Martigny (Switzerland) • Condition: like new, functional • Visit / inspection: upon request Transportation costs are the responsibility of the buyer.

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI bulk product packaging line – a complete installation For sale, a complete and fully functional bulk product packaging line for products such as: - pellets, - anthracite coal, - granulated fertilizers, - aggregates, - and other bulk materials. The machine enables the packaging of products into plastic bags weighing from 1 to 20 kg. It supports: - simple bags, - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 take-off conveyor, - frame with an operating platform, - filling hopper with a bucket elevator, - dust extraction system (2 filters), - screw compressor, - compressed air storage tank, - compressed air dryer. Technical data Nljdsz T Ahmepfx Abujh Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – no. 3016 Weighing dispenser RW-04 – no. 2093 Take-off conveyor RC-50 – no. 3018

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. The oil drip tray is used for the storage of non-spillable or opened containers such as paint cans, paint buckets, cleaning agents, etc. The oil drip tray can be optimally placed in a shelf rack. The scope of delivery includes: 01x oil drip tray, II. choice (new goods) Manufacturer: SSI Schäfer Type: OAW 4800 Material color: sendzimir galvanized Capacity: approx. 60 liters load capacity: 200,00 kg total width: approx. 1.020 mm Usable width: approx. 970 mm Nlodpfx Abon Atm Djush Total depth: approx. 790 mm Usable depth: approx. 784 mm Total height: approx. 125 mm Useful height: approx. 95 mm Material thickness: approx. 3.00 mm Weight | pc.: approx. 26,960 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Nedpfx Aez Iy Hzebuolh Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.

Year of construction: 2021, condition: like new (used), We are offering a Senro optical sorter, manufactured in 2021, for sale. The machine has been used for a limited number of hours. It consists of an infeed conveyor, which transports the product to the sorting machine. The sorting machine is equipped with an air bar containing nozzles that use air pressure to propel the product to be sorted across the bar. The hopper can be equipped with either NIR detection or visual detection. Cameras are still installed. Price negotiable; indicative price €50,000. Nsdpfszw I Hdox Abuelh If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2016, Manufacturer: Baader Model: 604-530 Year: 2016 Condition: Used Serial number: 120002207 Stock number: 3450 Drum: 10 mm Infeed height: 2400 mm Outfeed height: 900 mm Power: 3 x 400V, 50Hz, 9.3kW Dimensions: 1600 x 1650 x 2900 mm Nljdpfx Asz R Niaobujh Weight: 1700 kg Machine has only 1348 operating hours. Infeed hopper with mixing arm, touch screen control. Includes drum trolley, extra 10 mm drum, extra knife, and extra squeezing belt.

Condition: used, empty load weight: 5,710 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2017, suspension: air, load capacity: 36,290 kg, 20" 30" 40" 45" STORAGE BOX MANUAL DRAWER EXTENDABLE FRONT AND REAR Nsdpfs Aa U R Eox Abuelh LIFTABLE FIRST AXLE

Condition: good (used), Year of construction: 2005, operating hours: 3,736 h, functionality: fully functional, overall weight: 21,000 kg, For sale: Westeria wind sifter. Type: WS Raupe Operating hours: 3736 In good working condition. Nlodpfozbk U Tsx Abujh Year of manufacture: 2005. Fully mobile, with good tracks. Includes a generator. Ready for use. Keywords: Recycling, waste, sorting, wind sifter, sifter, screening, windshifter, windsifter, tracks, generator, power unit, tracks, mobile

Condition: used, functionality: fully functional, Year of construction: 2000, color: red, Material / tool or workshop container with 3 aluminum roller shutters on each side, and a tailgate at the rear. Various drawers, pull-out tables, and ramps. In good, well-maintained condition. Loading possible. Nljdjzv Dy Dspfx Abuoh

Year of construction: 2026, operating hours: 3 h, condition: new, WPS-1000 Eddy Current Separator with Magnetic Separator and Vibrating Table We offer a complete set for the separation of ferrous and non-ferrous metals from bulk materials, designed for professional installations and recycling lines. The set consists of: WPS-1000 eddy current separator, vibrating table, belt-type magnetic separator with a magnetic drum. The system enables uniform material feeding, removal of ferrous metals, and subsequent separation of non-ferrous metals, such as aluminum, copper, and brass. Nlodpfx Aszzn Aasbujh WPS-1000 Eddy Current Separator The separator is designed for the automatic separation of non-ferrous metals from a material stream transported on a belt. A high-speed rotor equipped with NdFeB magnets generates a variable magnetic field. The eddy currents generated in the non-ferrous metals cause them to be rejected from their natural trajectory, separating them from the remaining material. Technical data: magnetic rotor length: 1000 mm magnets: NdFeB rotor motor: 7.5 kW belt motor: 1.5 kW smooth rotor speed control smooth belt speed control PVC belt with sealing flange adjustable separation baffle enclosed construction control cabinet with IP55 safety system device color selectable Vibrating Table + Magnetic Separator The vibrating table is responsible for the uniform distribution of the material before further separation. Then, the material is fed onto a conveyor equipped with a powerful magnetic drum, which removes ferrous metals before the material is fed into the WPS-1000. Technical data: vibrating table width: approx. 1000 mm vibration drive: 2 × approx. 0.8 kW magnetic drum width: approx. 1100 mm magnetic strength: up to approx. 12,000 Gauss magnetic roller diameter: approx. 200 mm belt drive motor: approx. 1.1 kW reinforced PVC belt partially stainless steel construction Application The set can be used, among other things, for processing: mixed scrap, electrical and electronic waste, plastics containing metals, shredded cables and wires, fractions after shredding, other materials containing ferrous and non-ferrous metals. Separation process: vibrating table → separation of ferrous metals → eddy current separator → separation of non-ferrous metals. The devices can operate as a complete set or be integrated into an existing technological line.