Used Material Separators for sale (19,484)

Condition: used, Straightening and welding plate made of steel, solid material Nljdpfx Ajhwn Tijh Soh Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - solid steel plate - milled surface - 4 bolted lifting lugs - plate equipped with some symmetrical holes Net weight approx. 2380 kg

Condition: used, functionality: fully functional, Scheugenpflug A310 K4750-X11 Material Preparation and Feeding unit. The all-round system A310 simultaneously prepares the dispensing material while loading it from the barrel. Temperature control also helps to optimise the viscosity of the dispensing medium. The applied vacuum evacuates air trapped in the material already during preparation. Degassed material is required for a bubble-free dispensing process. Circulating the dispensing material continuously prevents sedimentation of the contained filler materials and keeps the properties of the dispensing material components at a constant level. The stirring intensity is adjusted to the dispensing material being prepared. Used for l Materials: • One and two component • Liquid to medium viscous • Non-abrasive to highly abrasive • Non-filled to highly filled Technical Data: • W x H x D (1C-60 l) 700 x 1950 x 1000 mm W x H x D (2C-60/60 l) 700 x 1950 x 1400 mm • Weight: 240 kg (1C-60 l) 400 kg (2C-60/60 l) • Feeding volume: 250 ml/stroke • Power supply: 3~ 400 V, 50/60 Hz, CEE 16 A • Ejector evacuation power: 12 l/min (at 6 bar) • Vacuum pump evac. power: 242 - 283 l/min • Heating capacity: up to 80°C • Peripheral speed of agitation blade: 39 rpm • Tank heater power: (230 V) approx. 1000 W Nodpstp Df Hsfx Ah Selh Good working condition. Please check out our other listings as well.

Year of construction: 2017, condition: used, Wolf Bucket Separator TSP.124 is designed for heavy-duty continuous operation on construction sites, storage yards, or landfills. The bearings are maintenance-free and the chain boxes are filled with semi-fluid grease, which is distributed by the movement of the bucket and running of the chain to ensure lubrication at all points. This means the Terra-Star does not require re-lubrication and is maintenance-free. The machine is equipped with M80X mixing shafts, and the tools in the wear zones are reinforced with hardfacing wire. Combined use on excavators and wheel loaders is easily possible. The adapter is not included in the price. For excavators from 18 t Nodpfew U Utasx Ah Solh For wheel loaders from 10 t Weight in kg: 1850 Throughput: 52 - 77 m³/h Required drain line: 1 Series: TSP.124.022

Condition: excellent (used), Year of construction: 2023, operating hours: 421 h, functionality: fully functional, Equipment: CE marking, Multiplas V4 Injection molding Machine (new 2024) We are offering for sale a well-maintained vertical injection molding machine from 2024 which is currently being used in a clean and well maintained production facility outside of Oslo, Norway. Price: 25.000 EUR This Multiplas vertical injection molding machine ensures precise positioning, enhancing the overall quality of your products. With precise control over injection speed, pressure, and temperature, you can produce high-quality parts with tight tolerances, minimizing waste and maximizing yield. Traditional horizontal injection molding machines require significant floor space, limiting your production capacity. In contrast, vertical injection molding machines utilize vertical space efficiently, allowing you to maximize your factory's footprint. With a smaller footprint, you can optimize your layout and increase machine density. Vertical injection molding machines excel in molding complex, intricate parts with precision. Their vertical clamping and injection units facilitate seamless integration into multi-component molding processes, enabling you to manufacture diverse products with varying material properties. General information: • Manufacturer: Multiplas Enginery Co. LTD • Model: Multiplas V4, V2C-50T • Serial number: on request • Year of manufacturing: 2023, delivered 2024 • Operating hours: 421 • Dimensions (L/W/H): 2,3 x 1,5 x 3.7 m • Weight: 3,4 ton • Functionality: fully operational • Condition: very well maintained Extras: • TPU Screw and barrel • CE Certificate • Color RAL 9002 • 400V Transformer • Installation guide • Machine Manual Machine Specifications: • Screw diameter: 35 mm • Theoretical Injection Volume: 154 cm3 • Injection Capacity (PVC): 145 gm • Injection Pressure: 1383 kg/cm2 • Injection Rate: 69cm3/sec • Plasticizing Capacity (PVC): 53 kg/hr • Screw Rotation speed: 186 r.p.m. • Heater Capacity: 3,9 kw • Clamping Force: 55 ton • Min. mold Thickness: 350 mm • Opening Stroke: 300 mm • Max. opening Thickness: 650 mm Nedpsw S Ewqefx Ah Solh • Ejector power: 1,8 ton • Electrical Power: 10/7,5 hp/kw • Oil tank Capacity: 160 L • Cooling water Capacity: 230 l/hr • Machine size: 2,3 x 1,5 x 3,7 m • Machine weight: 3,4 ton Can be viewed on site. More pictures and videos can be sent to interested buyers. The machine is ready to be sold immediately.

Condition: not inspected (used), functionality: fully functional, Wooden crate with nuts, bolts, screws, and other fasteners. 820kg (weight is excluding the wooden crate) Njdpfxsw Hrw Ie Ah Solh Lot includes the wooden crate.

Condition: used, Year of construction: 2023, Weights Empty weight: 174 kg Functional Mast: articulated arm Lifting capacity: 350 kg Identification Serial number: 09-237302 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Max. horizontal reach: 0 m Transport dimensions (LxWxH): 0x0x1.87 Additional information Nsdpfjtr Ilxex Ah Solh Please contact PFEIFER GROUP for more information

Condition: used, Decoiler, pivoting decoiler GSW SCHWABE Type LHD 50/800 Sond Double decoiler, double mandrel decoiler Factory No.: 5775 Year of manufacture: approx. 1995 Coil weight: 50 kg per side Coil width: max. 130 mm Coil inner diameter: 155 - 445 mm Coil outer diameter: 850 mm Support discs: Ø 850 mm Start rings: Ø 850 mm Distance from center of mandrel shaft to base: 980 mm - Manual 180° rotatable decoiler assembly with locking positions Nlodpfehubgwex Ah Sjh - Central expansion via rotation lever adjustment - Mechanical disc brake, adjustable brake shoes with knurled screw Required space (L x W x H): 1000 x 850 x 1500 mm Weight: 190 kg Good condition

Year of construction: 2023, condition: good (used), Top condition – with warranty Nsdpfsw Hycrjx Ah Solh Special equipment available on request. Price: On request The ideal attachment for wheel loaders to evenly distribute material such as concrete, asphalt, bulk goods (sand, grit, gravel, topsoil, salt, etc.) via a conveyor belt. Possible areas of application include road construction, pipeline and sports field construction, as well as municipal use. Cost-effective alternative to a berm paving machine. General description (including photos and application videos) and technical data for the product can be found on our Optimas website. The photos are for illustrative purposes and do not show the actual products for sale. If you are interested, please feel free to contact us at any time by phone or email.

Condition: excellent (used), Here we offer you an Objet Stratasys 3D printer. The Objet Connex 500 is the pioneering multi-material 3D printer from Objet. With a large footprint of 500 x 400 x 200 mm, designers and engineers can quickly prototype, Nljdeg S A N Topfx Ah Soh to more closely simulate the intended end product than any other technology. What is unique about the Objet Connex? With Objet's patented simultaneous multi-material molding technology, the Objet Connex 500 can produce print models from up to 14 different materials in a single print job. The system is ideal for designers and engineers who want to effectively highlight the different material components in complex or composite products. Freedom to choose your own materials The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™. It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics. Outstanding productivity The Objet Connex 500 offers: - Multi-material models - no more designing, printing and gluing together separate model elements. - Different parts. Different materials. Same tray - saves time and serves multiple needs at the same time. - Excellent 16 micron high resolution printing accuracy - 600 DPI X & Y resolution - Thin walls

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. Nledjg Sxmfepfx Ah Soh High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2016, condition: used, machine/vehicle number: TSP.123.003, For soil conditioning, mixing in lime, binders, sand, compost, and other soils. Crushing and breaking up soil clods, separating stones, branches, roots, etc. Particle size 0-60/80 mm. Aerating, crushing, shredding, and turning biomass, biowaste, and compost. Price without adapter. For excavators from 16 t. For wheel loaders from 9 t. Weight in kg: 1640. Throughput: 44 - 60 m³/hr. Leakage oil connection required: yes, absolutely essential. Series: TSP.123.003 Nledpjw Slcaofx Ah Seh

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. --- Technical specifications can be found in the handout. Nljdpfx Ahew Dd Rzo Soh Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Nedpfx Aoua Nngsh Selh Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Year of construction: 2009, condition: like new (used), functionality: fully functional, Still in CLEANROOM at the moment!!! with S!MPATI software with vacuum connection Nledpfxsv T I I Rj Ah Ssh Vötsch Drying Cabinet VTLF 160/150/110. Max temp 190°C. Drying format 1000x1400 mm. Stainless steel equipment. Filter H13. Function The VTLF cleanroom dryer for coating materials is designed and constructed according to EN 1539. After the load has been placed in the dryer and the doors are closed, the circulating air flows around the load in the dryer's usable space. The turbulent flow ensures good and spatially uniform heat transfer to the load. Technical Specifications Interior (usable space) m3 2.78 Internal dimensions Width Height Depth mm 1600 1500 1100 Weight (net) kg approx. 1400 Recirculation fan speed Min. setting range Max. setting range % 50 120 Minimum exhaust air flow rate (extraction mode) Reduced exhaust air flow rate (recirculation mode) m3/h 360 90 Flushing time 5 air changes per second 300 Total steam volume m3 4.5

Year of construction: 2009, condition: excellent (used), The Objet Connex 500 is Objet's groundbreaking 3D printer for multiple materials. 500 x 400 x 200 mm in size, designers and engineers can quickly create prototypes to simulate the intended end product closer than any other technology. What's unique about Objet Connex? With Objet's patented simultaneous multi-material spray technology, the Objet Connex 500 can print models of up to 14 different materials in a single print job.The Objet Connex500 offers an unmatched selection of over 60 materials, including up to 51 Digital Materials ™.It allows users to simulate various mechanical and physical properties, from rubber to rigid, opaque to transparent; and standard to ABS engineering plastics.Outstanding Productivity The Objet Connex 500 offers:- Multi-Material Models - No need to design, print, and glue separate model elements- Different parts- Multiple materials models - No need to design, print, and glue separate model elements- No need to design, print, and glue separate parts- No need to select your own materials to effectively highlight different material components in complex or composite products. Different materials. Same compartment - saves time and meets multiple requirements simultaneously - Excellent 16 micron high resolution pressure accuracy - 600 DPI X Nledpfod Sukxsx Ah Soh

Year of construction: 2025, condition: used, machine/vehicle number: TSC.154.304, Wolf Bucket Separator Terra-Star Compactline TSC.154 consistently amazes customers with its high throughput. The TSC.154 requires only 20 to 30 seconds to process a capacity of 1.25 m³. With 50 loads, this results in well over 60 m³ per hour. The ability to quickly and easily change the shafts makes the Terra-Star Compactline range unique on the market. The separator is equipped with screening shafts and star discs with a separation distance of 15mm, yielding a grain size of 0-20/25 mm. The tools are hard-faced with armor wire in wear areas. Price without adapter Suitable for excavators from 14 t Suitable for wheel loaders from 10 t Weight in kg: 1450 Throughput: 44 - 54 m³/h Leak oil connection required: no Nledpow Sky Refx Ah Sjh Serial no.: TSC.154.304

Condition: excellent (used), Labotek Type: FMD-M-M-15-15-V Model 101134 The Labotek FMD-M-M-15-15-V model is part of the FMD-M series by Labotek, a leading manufacturer of material drying, dosing, and conveying systems for the plastics industry. The FMD-M series comprises modular dryers designed for processing plastic granules. Technical Specifications of the FMD-M Series Model designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are specifically designed for processing plastic granules and are characterized by their modular construction, allowing flexible adaptation to a wide range of production requirements. Voltage: 3x400 Vac+PE Current: 10.4 Amp Overcurrent protection: 16 Amp Power: 2.6 kW Frequency: 50/60 Hz The Labotek AVR3G is an industrial vacuum conveyor with a 1-liter capacity, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical factors. Technical data for Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed material: Free-flowing, granular raw material (minimum grain size 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Nodpfswwh Evjx Ah Sslh Maximum material temperature: 80°C Alarm function: Low material level Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data. Details are provided without obligation!) If you have further questions, we are happy to assist you by phone.

Year of construction: 2021, condition: used, machine/vehicle number: TSC.153.028, Wolf bucket separator Terra-Star Compactline TSC.153 continuously impresses customers with its high throughput. The TSC.153 requires only 20 to 30 seconds to process a capacity of 0.95 m³. With 50 fills, this results in well over 45 m³ per hour. Nsdpfx Asw Skvroh Sslh The ability to quickly and easily convert the shafts makes the Terra-Star Compactline series unique on the market. The separator is equipped with screening shafts, star discs with a separation gap of 30mm – producing a grain size of 0-35/40 mm. In wear zones, the tools are reinforced with hardfacing wire. Price without adapter For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 34 - 50 m³/h Leak oil connection required: no

Year of construction: 2017, condition: used, machine/vehicle number: TSC.184.001, Here we have a special separator designed for processing organic waste, biomass, compost, etc. The separator is equipped with special shafts, making it possible to process soft materials such as beets, potatoes, bread, etc., which are shredded and torn apart. Organic waste is thus shredded and broken down, allowing for better bacterial penetration. It is ideally suited for mixing and aerating compost. We took the separator back from a customer who no longer needed it. Nljdpfew Sgv Iox Ah Sjh The housing was originally designed for a four-shaft separator, but we modified it so that only three shafts are now installed, providing more space between the shafts. Since the shafts rotate in opposite directions, material is drawn in more effectively. The unit is fitted with a Volvo wheel loader mounting. In operation with compost, the loader should weigh approximately 8 tons. I am happy to provide personal consultation. Jürgen Wolf Suitable for excavators from 16 t Suitable for wheel loaders from 8 t Weight in kg: 1600 Throughput: 52 - 77 m³/h Leak oil connection required: no

Year of construction: 2025, condition: used, machine/vehicle number: TSC.154.266, Application: For soil conditioning, incorporation of lime, mixed binders, sand, compost, and other soils. Crushing and disintegrating soil clumps, separating stones, branches, roots, etc. Particle size 0-60/80 mm. Aerating, shredding, tearing, and turning of biomass, organic waste, and compost. Nodpfx Aow R Ukdjh Selh Price without mounting plate Suitable for excavators from 14 t Suitable for wheel loaders from 8.5 t Weight in kg: 1450 Throughput: 44 - 65 m³/hr Leak oil connection required: no

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: TSC.154.293, Wolf bucket separator for screening coarse material and construction debris. Equipped with screening shafts with a spacing of 40mm, producing a screened fraction of 0-45/50mm. The shafts are reinforced with hardfacing wire in wear zones. Currently fitted with a Likufix SW33 excavator adapter combined with a wheel loader mount, compatible with Volvo as well as Liebherr/CAT. The hydraulic hose assembly is connected by screw couplings for fully hydraulic switching from excavator to wheel loader. Price without adapter, other adapters can be mounted on request. For excavators from 14 t For wheel loaders from 10 t Weight (kg): 1450 Throughput: 44 - 65 m³/h Leak oil connection required: no Nlodpfx Asw R D S Rsh Soh

Year of construction: 2024, condition: used, machine/vehicle number: TSC.154.309, Application: For soil conditioning, mixing lime, binding agents, sand, compost, and other soils. Crushing and pulverizing soil clumps, separating stones, branches, roots, etc. Grain size 0-60/80 mm Aerating, shredding, tearing, and turning biomass, bio-waste, and compost. Price without adapter For excavators from 14 t Nljdow Rrg Ajpfx Ah Ssh For wheel loaders from 8.5 t Weight in kg: 1450 Throughput: 44 - 65 m³/h Leak oil connection required: no

Year of construction: 2024, condition: used, machine/vehicle number: TSC.153.042, Wolf Bucket Separator Terra-Star Compactline TSC.153 continually astonishes customers with its high throughput. The TSC.153 requires only 20 to 30 seconds for a capacity of 0.95 m³. With 50 fillings, this results in well over 45 m³ per hour. The ability to quickly and easily change the shafts makes the Terra-Star Compactline series unique in the market. The separator is equipped with screening shafts and star discs with a separation gap of 15mm – producing a grain size of 0-20/25 mm. Tools in the wear zones are armoured with hardfacing wire. Nledjw Rqz Eopfx Ah Soh Price without adapter For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 34 - 50 m³/h Drain line connection required: 2

Year of construction: 2024, condition: used, Applications and use: The separator is best suited when a light excavator needs to handle heavy, stubborn materials. It is derived from the wider TSC.154 and features the same drive and bearing assembly, resulting in increased power output on a smaller screening surface. The built-in star discs are 5 mm thicker than the standard discs and are additionally fitted with welded-on wear protection. The disc separation gap is 20 mm, resulting in a screened particle size of 0-25/30 mm, ideal for producing backfill material. Price does not include the mounting plate. Nedpfew Rkxqjx Ah Selh Adapters for excavators can also be custom fabricated and supplied upon request. Price on request. For excavators from 11 t For wheel loaders from 8 t Weight in kg: 1200 Throughput: 30 - 45 m³/hr Leak oil connection required: no

Year of construction: 2025, condition: like new (used), shovel volume: 0.7 m³, Separator features screening shafts and screens fraction sizes of 0-15/20 mm, suitable for fine screening of stones and soil. Ideal for screening and backfilling pipe and trench works with high throughput. As new condition – only one bucket has been processed. Head plate for all systems possible upon request. For excavators from 9/10 t Nljdpfjw Rkicsx Ah Ssh For wheel loaders from 6.5 t Weight in kg: 905 Throughput: 25 - 38 m³/h Leak oil connection required: no