Used Micrometer for sale (149)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Gedow Uc Npspfx Ac Aetw Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: new, Year of construction: 2025, functionality: fully functional, LBM950 COMEC Line boring machine for cylinder heads and blocks - NEW machine Specifications: Boring capacity: 24 - 85 mm Max boring bar travel: 190 mm Min-Max distance height supports-bar C/L: 100 - 376 mm Max cylinder head and block length: 810 mm Max cylinder head and block width: 300 mm Variable spindle rotation speed: 0 - 1000 rpm Spindle traverse rate: 0 - 5000 mm/min Feed motor power: 1,27 Nm Spindle rotation motor power: 0,68 Nm Dimensions (LxWxH): 1780x800x1385 mm Weight: 375 kg Standard equipment: Single phase power supply (230V/50Hz/1ph) Bar displacement on linear guideways with ball screw drive system Bar displacement/rotation acted by brushless motors Touch screen control panel Operating software for manual and automatic working process Electronic handwheel for manual displacement (Fast-Medium-Fine speeds) Basement with equipment-tray Boring bar supporting arms Universal head clamping fixture BC0800 Dia. 24-85 mm chromed tool holder bar L = 800 mm AP0800 Dia. 50-85 mm toolholder ring for blocks Gsdpfxjykun Aj Ac Ajtw Set of boring tools DC0200 Centering device with dial gauge AC0093 (2 pieces) DT0100 Tool setting device complete of dial gauge with micrometer AC0091 Set of fixing screws for cylinder heads Wrench set Instruction manual EC declaration of conformity If you are interested, please feel free to contact us! Other machines for sale: Berco, Comec, Sunnen, Carmec, Kwik-Way, Serdi, PEG Valve grinders, surface grinders, valve seat milling machines, pressure testing machines, parts washing machines

Condition: new, Year of construction: 2024, functionality: fully functional, Baty SM300 profile projector - Compact and precise optical inspection The Baty SM300 profile projector is a versatile and precise projector designed specifically for demanding quality control on the shop floor or production floor. With a vertical light path and a 300 mm screen, it is ideal for inspecting small and medium-sized workpieces. The SM300 offers a high resolution of 0.5 microns and a measuring range of 150 mm x 50 mm, enabling detailed and precise measurement of components. The device is available with different magnification lenses, including 10x, 20x, 50x and 100x, to meet the specific requirements of your inspection tasks. The GMR display, which enables full geometric functionality, is available as a display option on this profile projector. These features make the SM300 an ideal choice for quality control applications where precision and efficiency are critical. Features: 300 mm screen with finely ground glass for clear projections. Robust design suitable for use in harsh environments. Magnification options: 10x, 20x, 50x, 100x. Measuring range of 150 mm x 50 mm with a resolution of 0.5 micrometers. Integrated profile and surface illumination for sharp and precise images. Digital angle measurement and complete geometric measurement functions with the GMR display system. Gtsdpfjuyh N Sex Ac Asw The SM300 is particularly suitable for workshops where reliable and precise inspection is required. The robust design ensures a long service life and consistently high measuring accuracy, even under difficult conditions.

Condition: not inspected (used), functionality: unexamined, total length: 800 mm, total width: 700 mm, total height: 1,100 mm, overall weight: 250 kg, No reserve price – guaranteed sale to the highest bidder! The workshop cabinet is being auctioned due to business closure. Placing a bid obligates timely collection between 26.01.2026 and 29.01.2026! Contents include: - VEITH test pins in various sizes - SUBITO internal micrometer & additional measuring tools - Magnetic plate (150 x 75 mm) MACHINE DETAILS Dimensions & weight Dimensions: 800 x 700 x 1,100 mm Weight: 250 kg Gedpoxqd Rfofx Ac Ajtw

Condition: not inspected (used), functionality: unexamined, overall weight: 400 kg, total length: 3,000 mm, total width: 700 mm, total height: 1,100 mm, No minimum price – guaranteed sale to the highest bidder! The workbenches are being auctioned off as part of a business closure. Submitting a bid obligates prompt collection between 26.01.2026 and 29.01.2026! Gtedpfxsxqc Sho Ac Asw 2 workbenches including contents. The contents comprise: Gauge block set (partially incomplete) Test pins Magnetic clamping plate (350 x 150 mm) Micrometer MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,000 x 700 x 1,100 mm Weight: 400 kg

Condition: not inspected (used), functionality: unexamined, total length: 730 mm, total width: 720 mm, total height: 1,100 mm, overall weight: 150 kg, No minimum price – guaranteed sale to the highest bidder! The accessories are being auctioned off as part of a business liquidation. Submitting a bid obligates the buyer to collect the items within the period from 26.01.2026 to 29.01.2026! Godpfoxqc A Hex Ac Astw Contents comprise: various micrometers (manual and digital) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 730 x 720 x 1100 mm Weight: 150 kg Note: The D’ANDREA boring head shown on the workshop cabinet is not included in the scope of delivery.

Condition: not inspected (used), functionality: unexamined, total length: 1,000 mm, total width: 800 mm, total height: 1,100 mm, overall weight: 250 kg, No minimum price – guaranteed sale to the highest bidder! The workshop cabinet is being auctioned off due to company closure. Bidding obligates timely collection between 26.01.2026 and 29.01.2026! Contents (manufacturer predominantly Etalon): • Twist drills in various types and sizes • Reamers • Calipers • Various micrometers Gtodsxqbbzjpfx Ac Asw • Inside micrometers • Go/no-go gauges • Three-point internal micrometers in various sizes MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 800 x 1,100 mm Weight: 250 kg

Condition: used, Fine boring head, spindle tool, boring head, bridge tool, fine boring head boring tool, boring spindle, boring bar Holder for bridge tool = SECO - epb GRAFLEX (Made in France) type A731 200 Boring head for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-010 Boring block for bridge tool = SECO - epb GRAFLEX (Made in France) Type A731-500 Counterweight for bridge tool = SECO - epb GRAFLEX (Made in France) type A731-600 Tool holder: GRAFLEX holder size G7 = Ø 46 mm Machining diameter: 200-280 mm Gtedpfxoqgpb Es Ac Aew Adjustment accuracy: 0.01 mm Machining depth without extension: max. 140 mm - Adjustment by micrometer spindle and vernier (in steps of 0.01 mm, graduation 2.5 µm, to the diameter) - Cutting insert holder for Route cutting insert with approx. 10 mm edge length Total tool length with extension and mounting spigot: 184 mm Weight complete: 11.5 kg Very good condition, as good as new - probably unused

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm Gtsdpfxjc Ipc Us Ac Aew → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: as good as new (ex-display), machine/vehicle number: 520511, Features: → robust machine housing made of cast iron → automatic loading and unloading of the test force → automatic change between lens and indenter body → LED illumination → digital measuring eyepiece → LCD color display touch screen → conversion to other hardness scales (e.g. HRC/HB) → easy operation Technical data: → test loads in grams (10 / 25 / 50 / 100 / 200 / 300 / 500 / 1000). → Vickers testing method → cross table 110 x 110 mm / travel 25 x 25mm → eyepiece 10X → automatic obejctive turret → objectives 10X / 40X / 60X → max. specimen height 90mm → max. specimen depth 110mm → conformity: DIN EN ISO 6507 / ASTM E-384 → weight approx. 50kg → power supply 230V / 50Hz Scope of delivery: → hardness tester → diamond indenter 136° → Cross table 110 x 110mm → Eyepiece 10X → revolving nosepiece → Objectives 10X / 40X / 60X → LED illumination → Power cord → Accessories case Godpoc Ipckofx Ac Ajtw → Instruction manual OPTIONAL → VMS3 software (video measurement system) → Digital micrometer (for transferring the edge distance into the VMS software) → Module "automatic measuring" (only in connection with VMS3 software) → PC system / monitor

Condition: refurbished (used), functionality: fully functional, Test method: Vickers Test forces: HV0.2 / 0.3 / 0.5 / 1 / 2 / 3 / 5 / 10 Scope of delivery: - Hardness tester - Diamond indenter 136° Vickers - LED illumination Gsdpodmz Uzsfx Ac Aotw - Cross table 135 x 135mm - Objective revolver - Objectives 20X / 40X / 60X Optional: - VMS3 (video measuring system) - Digital micrometer screw - PC system

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. Gedpfjt Hwruox Ac Aetw * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: new, Short and length grinding machine Gtedjd Idb Iepfx Ac Aew Brand HERZOG Model LY 600 400V version Length tolerance: ± 0.01 mm Angularity: ± 0.01 mm Diameter range: 1 – 25 mm Dimensions: 430 x 360 x 500 mm Weight: 87 kg Accessories: - Measuring stop with micrometer screw - Cup wheel and cutting wheel - Operating instructions

Condition: excellent (used), Various ZEISS eagle eye navigator as shown in the offer. Product description of the manufacturer: Rapid quality assurance in car body construction In addition to countless holes, edges are in the automotive industry to measure such as cuts and transitions as well. Straight in the series, the control of drilling is a very time-consuming job. With the EagleEye Navigator saves nearly half of the time for a complete body. Typical intensive working steps of the conventional method completely eliminated: no mounting and dismounting of hemisphere adapters, materials, storage and handling costs. Shortened lead times and high quality And that's not all: the use of ZEISS EagleEye navigator shortens the throughput time of measuring immediately and increases the quality of pressed parts at the same time. At the end of a high exactly can be evaluated result with details of the diameter, the position and shape of the measuring element - is exactly the micrometer. With ZEISS EagleEye navigator is the CMM to the means of production. Data and price: On request! We can make you a detailed offer! Note: Our offer is aimed exclusively at professionals! Gedpfxsdy Apvj Ac Aotw (Errors and omissions in the technical data, information and prices and subject to prior sale!)

Condition: new, Center height: 250 mm Swing diameter over slide: 350 mm Swing diameter in the bend: 695 mm center width: 1500 mm spindle nose: DIN 55029, Camlock, size 6 bed width: 305 mm cross slide travel: 272 mm top slide travel: 155 mm Gsdpfxsgt E Ilo Ac Astw spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth thread: (45) 2 - 72 TPI Metric thread: (39) 0.2 - 14 mm Diametrical thread: (21) 8 - 44 D.P.I. Module Thread: (18) 0.3 - 3.5 Module Longitudinal feeds: 0.04 - 1.00 mm/rev face feeds: 0,02 - 0,50 mm/rev motor power: 5,5 kW dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg Features: - Toolmaker accuracy - Infinitely variable speed control (3 preload stages) - Finely balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base frame - Adjustable precision taper roller bearings in the main spindle - Easy-to-operate feed gear with large feed range running in closed oil bath. - Low maintenance central lubrication - Removable bridge. - CE Equipment: - 3-axis digital display (resolution 0.005 mm) - frequency converter - Machine stand with high splash guard rear wall and integrated lighting - Chip tray can be pulled out to the front - 3-jaw lathe chuck - Fixed steady rest - Moving steady rest - Micrometer bed stop - Oil cooler - Two emergency stop pushbuttons and foot pedal with electric braking device - Limit switch protected chuck, rotating steel holder protection and cover of the lead and pull spindle according to the European safety standards CE - Coolant device - Fixed center punch - Reducing sleeve for main spindle - Operating tool in tool box

Condition: new, Made in Italy. Center height: 300 mm Turning diameter over bed: 600 mm turning diameter over slide: 380 mm center width: 1.500 mm bed width: 400 mm spindle bore: 82 mm spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm motor power: 9,2 kW (special equipment / standard: 7,5 kW) feed Z-axis: (93) 0,028 - 6,43 mm/rev feed X-axis: (93) 0,012 - 2,73 mm/rev Thread, metric: (54) 0.5 - 224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, modular: (54) 0.5 - 112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P. Cross slide stroke: 340 mm Top slide stroke: 150 mm Tailstock quill diameter: 85 mm Tailstock quill stroke: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital display - Automatic lubrication of the guideways - LED illumination - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick change holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X- and Z-axis - Electrical equipment from high quality brand components e.g. Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed center punches - All safety devices according to CE standards: Rotary chuck guard with plexiglass disc, micro limit switch secured. Rotating chuck guard with Plexiglas disc. Rear splash guard along the entire length. Lead screw and pull screw protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant device - fixed steady rest Godpsd Nk Ncsfx Ac Astw - travelling steady rest - operating tool, acceptance protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price incl. 3-axis digital display.

Condition: refurbished (used), Year of construction: 2025, Function The TAM 25/600 cuts off and face-grinds ejector pins, core-pins and punching-dies precisely within seconds! Workpieces from .032 to 1“ diameter, high speed steel or thungsten-carbide can be cut easily. Just insert the workpiece into the quick acting chuck, adjust to desired length and cut it at once. Optional there is an auxiliary chuck for very thin, short or stepped pins. Your advantages: • Quick acting chuck easy to use • Rapid insert and remove of workpieces • Cut-off and face-grind in one clamping • Auxiliary chuck for very thin, short or stepped pins After cutting off the work piece move it to end position, snap in lock-pin and measure it by a micrometer. Now finish workpiece to specified size by advancing the fixture using the micrometer screw. To dress the grinding wheel move grinding spindle forward. It will now be dressed automatically by the integrated dressing- diamond. This will leave the micrometer screw at 0-position at all times. Your advantages: • Precision advance of workpiece through micrometer-screw • Integrated dressing diamond for grinding-wheel • Water-cooled cutting and grinding in standard equipment • Adjustable grinding spindle to maintain zero "0" - position setting between cut-off and grinding-spindle The precision Drive motor 1,1 KW 400 V 1,2 HP Gedpfx Aefig I Njc Ajtw 220 – 440 V Cut-off-spindle 11000 rpm 11000 rpm Grinding-spindle 4400 rpm 4400 rpm Cut-off-diameter limits 0.5 – 25mm 0.032 to 1“ Cut-off-length limits 600 mm 23 – 5/8“ Cut-off wheel 125 x 1.0 x 20 mm 5“ x 0.04 x 20 mm bore Grinding wheel 100 x 50 x 20 mm 4“ x 2“ x 20 mm bore Base dimensions 700 x 500 mm 27 – 1/2“ x 19 – 5/8“ Net weight Kg 135

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,917 h, functionality: fully functional, Myford Super 7 lathe for blacksmiths, single-phase. In good working condition. The Myford Super 7 lathe for blacksmiths is single-phase and has been used exclusively for hobby work. It is equipped with a Norton gearbox and mounted on a genuine Myford stand. The lathe comes with a variety of accessories listed below. Accessories included: - Norton gearbox - 4-jaw chuck - Tailstock with chuck - Various chucks and keys - Reamers (various) - Thread files - Cutting tools - Vernier calipers (various) - Internal micrometers (many different sizes) - Thread gauges (BSF, BSW, metric, etc.) - Thickness gauges - Perun arc tools - Spiral drills with 1MT - Center drills - Live center Godjx Akcfepfx Ac Aetw - Rear tool post - Blocks - Faceplates (various)

Condition: ready for operation (used), Etalon Polo Horizontal Length Measuring Device Measuring Bench Gauge External measuring range: 0 ÷ 100 mm Internal measuring range: 5 ÷ 100 mm Measuring span: 50 mm Output device resolution: 0.001 | 0.0001 | 0.00002 mm Error limit 0.5 µm Measuring force, adjustable: 0 ÷ 4 N Support table height adjustment: 18 mm Length: 500 mm Width: 170 mm Height: 170 mm Weight: 41 kg Accessories: Mounting plate with H-shaped recess Mounting block for floating measuring table Control system for lever dial indicators Floating measuring table with tip holder 1 pair of measuring inserts 1 micrometer spindle for testing dial indicators and lever dial indicators Application examples: Gtedpfswcxgzox Ac Aew - Checking plug gauges with a control system - Checking plug gauges and test pins with a floating precision measuring table - Measuring test pins - Checking ring gauges with a mounting system - Checking thread plug gauges with a control system. - Testing dial indicators You are welcome to come by for a viewing. We would be happy to arrange a cost-effective shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical specifications and errors in the description of the item may occur and are reserved.

Year of construction: 2023, condition: like new (used), SYNC Analyzer Measurement method: Laser diffraction (ISO 13320) + dynamic image analysis (ISO 13322-2) Version: 3R + L (three red lasers 780 nm + L camera 4.6–2000 μm) Measurement range: 0.02 – 2000 μm Dispersion: wet (FlowSync) + ultrasonics Product page: Laser Diffraction and Image Analysis: SYNC :: For sale: Microtrac SYNC 3R L Particle Size Analyzer – Year of manufacture 2023 Gedpjwtthujfx Ac Aotw We are offering a modern Microtrac SYNC 3R L particle size analyzer, a demo unit, in perfect technical and visual condition. The equipment has been tested and calibrated by the manufacturer and is ready for immediate operation. 🔍 Specification: • Model: Microtrac SYNC 3R L • Year of manufacture: 2023 • Condition: Demonstration, like new • Tested and verified by the manufacturer • Original Microtrac FLEX software installed • Measurement by laser diffraction (LD) and dynamic light scattering (DLS) • Measurement range: from nanometers to micrometers • Automatic liquid feeder – 3R version (3 reactors) • Complete set, ready to use ✅ Advantages: • The device enables fast and precise measurements in R&D and production laboratories. • Integration with software facilitates operation and data analysis. • No wear – the device was used exclusively for demonstration purposes. 💼 Ideal for: • Pharmaceutical, chemical, materials, and cosmetics industries • Research and development centers • Universities and analytical laboratories

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 1,200 h, High-end 3D printer for processing precious metals! TECHNICAL DETAILS Technology: DMLS (Direct Metal Laser Sintering) Build Volume Diameter: 80 mm Build Volume Height: 95 mm Layer Thickness: 20 µm Laser Type: Yb fiber laser 100 W Scanner: High-speed scanner, F-Theta lens Scan Speed: up to 7 m/s Beam Diameter: Laser focus >30 µm MACHINE DETAILS Dimensions & Weight Dimensions: 800 x 950 x 2,250 mm Weight: 580 kg Power Supply: 200-240 V Network Connection: Ethernet Machine operating hours: approx. 1,200 EQUIPMENT Software: EOS RP Tools, EOSPRINT Software license for silver powder Micrometer for height measurement 3 new steel build plates At least 4 used steel build plates, still usable USB key for software programs Note: It is recommended to have the machine serviced before commissioning. The manufacturer offers this service for approx. €5,000 including possible spare parts. Gedpexfz Hgjfx Ac Astw

Condition: excellent (used), A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom. Gsdpfx Aswny Nzsc Aotw Therefore, we are not only talking about mixing particles, but about a more complex process that can integrate emulsification, homogenization, solubilization, suspension, dispersion and disintegration of solid particles. To carry out this particle size reduction, the product is pumped under pressure by means of valves and pistons in monobloc compression blocks. These valves allow us to define the desired flow rate and pressure.

Condition: used, functionality: fully functional, A homogenizer is the machine that enables the size reduction of globules and fat particles of food products. In other words, it reduces variations in two heterogeneous substances, makes them uniformly consistent and reduces separation after mixing. Godpfxownx H Eo Ac Aotw As a result, we obtain particles of micrometer and nanometer size. This size will always depend on the characteristics of the product in question and the results we seek to achieve. Homogenizers stabilize fat emulsions and disperse solids in aqueous solutions. In this way, we avoid that with the difference in density, some parts of the mixture remain on the surface and others precipitate to the bottom.

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Gsdpfx Acjunaqvs Ajtw Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana