Used Nail Plate for sale (12,922)

Condition: used, Year of construction: 1976, wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 (100) mm Gijdpfokk Exox Abdel output: 300 St./min.

Year of construction: 1988, condition: used, sheet width 1500 mm Gedjlp U Txjpfx Abdeil plate thickness 3 mm weight of the machine ca. 4 t dimensions of the machine ca. BxTxH 2000x1500x1800 mm

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device - Forward sheet slide - Rear area protection with protective cage Gisdpfev Tzphex Abdjl - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: new, EROWA clamping pins F/A Inox (1 set = 20 pieces) ER-007980, new and originally packaged Gedox Tr Awepfx Abdsil

Condition: new, sheet thickness steel (max.): 3 mm, - Capacity 1070 x 3 mm - Roll diameter 90 mm Gijdpoi E Tzqjfx Abdel - Electrically adjustable trailing roller - Digital display - Hardened rollers - Possibility for conical rolling - Rotatable upper roller - Brake motor - Foot control - Emergency stop - Documentation - 400V

Condition: good (used), Magnetic plate, clamping plate, permanent magnet, magnetic chuck, magnetic chucking plate, permanent magnetic lathe chuck -Manufacturer: narex, magnetic clamping plate, permanent magnet chuck with chuck flange -Type: PERMAG K 250 -Clamping surface: Ø 250 mm Gijdpjv U Nwiofx Abdel -Recording dimensions: see photos -Dimensions: Ø 275 x 115 mm Total weight: 30 kg

Condition: good (used), Year of construction: 1976, wire diameter range: a) single wire: 2,2 - 3,8 mm Gisdpfx Abjd Im Nuedsl b) double wire: 2,2 - 3,4 mm nail length: 10 - 80 mm output: 300/600 nails/min.

Condition: used, functionality: fully functional, Year of construction: 1990, Capacity: 1540 x 3,0 mm. Capacity with prebending: 1540 x 2,0 mm. Upper roll: Ø100 mm. Gijdpfx Abjx Ryd Rodol Lower roll: Ø100 mm. Motor: 1,1 kW. Year: 1990 Country of origin: Sweden. Size (L x W x H): 2350 x 700 x 1050 mm. Weight: 785 kg. Asymmetric. With motorized bending roll with clock in hand wheel. All our used machines are tested and serviced before delivery.

Condition: excellent (used), Year of construction: 2011, functionality: unexamined, overall weight: 2,500 kg, total length: 4,500 mm, total width: 2,000 mm, total height: 350 mm, 2 x white sandwich panel 350 x 2000 x 4500 mm with hydraulically extendable wheels, design type 5 Giodpfx Abowxwcmodsl

Condition: new, EROWA Uniplatte C (1 set = 12 pieces) ER-093780, new and in original packaging Gedpfxex Trwzo Abdoil

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale Godpfxjx Ni D Rj Abdeil - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: good (used), Intermediate plate for column jib crane, crane foundation plate, overhead crane, workstation crane, crane foundation plate Giodpfx Abev Nidrsdjl -Column jib crane: Intermediate plate/base plate, outer diameter: Ø 1050 mm -Thickness: 50 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Empty weight: 676 kg

Condition: excellent (used), Year of construction: 1993, wire diameter range: 2,4 - 3,8 mm nail length: 50 - 90 mm output: 820 nails/min Gisdpfx Aed Ez Ersbdol

Year of construction: 2026, condition: new, NEW - - Ideal for removing plates from your standing plate storage. - For in-plant transport of the plates to the standing or lying panel dividing saw. - The steplessly height-adjustable support surface can be exactly to the height of your panel saw. height of your panel saw. - Panels weighing up to max. 250 kg can be transported or transported or swiveled by one operator alone. Technical data: Support height - standing: approx. 120 - 340 mm - lying: approx. 890 - 1200 mm max. plate size: 5200 × 2100 mm load capacity: 250 kg Location: ex stock 54634 Bitburg Giedod Tyaajpfx Abdjl - immediately available- Will be shipped for 90,- Euro net within Germany

Condition: new, The scope of delivery includes: 25x new leveling plates Suitable for manufacturer: Mecalux Material color: Sendzimir galvanized For frame profile: P 101 Material thickness: 1.00 mm Total width: 155 mm Total depth: 110 mm Hole diameter: 15 mm Number of holes: 2 Weight | Unit: 0.130 kg Gedpswa Npzefx Abdjil Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, functionality: fully functional, FLAIG Permanent Magnetic Chuck 300 x 150 x 51 mm, type PMSF/PMNM, with ultra-fine transverse pole division, magnetic system with neodymium magnets, fine pole spacing, removable key, maximum holding force 100 N/cm², magnetic field height 5 mm, pole plate wear allowance 6 mm, weight 19 kg, for clamping the smallest thin-walled workpieces for grinding and EDM work, ideally suited for pallet systems due to its very low dead weight. Gisdpfx Ajx Tqfkebdol

Condition: good (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: C971109, controller manufacturer: AMADA, controller model: PROMECAM, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, overall weight: 10,000 kg, total length: 4,500 mm, total width: 3,500 mm, total height: 2,800 mm, AMADA GPX 630 Guillotine Shear Godjxw T Iaspfx Abdsil - Power supply: 5.5 kW - Max. backgauge travel: 160 mm - Including left stop - Backgauge length: 3200 mm - Cutting length: approx. 3050 mm Note: The item must be definitively collected between 19 and 23 January 2026 on a date to be mutually agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate -Mounting plate: with dovetail guide -Clamping surface: 1955 x 1040 mm -Height: 110 mm -Dovetail: 27 to 45 mm / 35 mm high Gedpfetp Rfhox Abdeil -Pin opening: 47 x 47 mm -Quantity: 2x mounting plates available Price: per piece -Transport dimensions: 1955/1040/H110 mm -Weight: 1288 kg

Condition: excellent (used), Year of construction: 1990, total height: 350 mm, total length: 3,500 mm, total width: 1,750 mm, Length:3500mm Godpfx Abjx Hwl Dodsil Width:1750mm Height:350mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2026, TBS - Manual plate shears Manual plate shears Suitable for cutting mild steel, aluminium, copper, zinc, plastics High quality cutting blades made of steel with a hardness of HRC55-60 Equipped with two operating handles With front support surface with scale and adjustable back gauge 800 mm table height Scope of delivery: Gjdpfx Ascnxc Robdoil 2 operating handles Model TBS 2000-12 Article no. 3746020 Technical data working width max. 2000 mm sheet thickness max. - material tensile strength 400N/qmm 1,25 mm backgauge range 0-300 mm weight 511 kg Dimension in mm 2450 x 1100 x 1050 mm

Condition: new, The scope of delivery includes: 01x shim, new Manufacturer: Stow Material color: sendzimir galvanized Total width: approx. 120 mm Total depth: approx. 140 mm Material thickness: 1 mm Weight: approx. 0.125 kg | pc. Currently available in stock: approx. 2,500 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: Giedstdb T Eepfx Abdsl This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm Godpfx Ajb A Nbnobdeil -Table height: 960 mm -with supporting ribs -Cast iron plate -Weight: 1050 kg

Condition: good (used), The scope of delivery includes: 01x printing plate, used Material color: blue Dimensions: approx. 200 x 95 mm Material thickness: approx. 5 mm Number of drill holes: 02 pcs. Drill hole Ø: approx. 15 mm Weight per piece: 0.750 kg Your contact persons in our company: Gsdpfjt N T A Uex Abdjil Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Included in delivery: 01x locking angle, used Material color: sendzimir galvanized leg ,,A" approx. 35 mm leg ,,B" approx. 53 mm (contact surface see description) incl. distance block (grey) inner dimension ,,C" approx. 22 mm material thickness: approx. 2,00 mm Weight / pcs.: approx. 0,120 kg Remark: Gjdpepgndgsfx Abdsil Due to the included the Z-bracket can be used for various truss widths crosshead widths from 40 - 60 mm! Brief overview / range of application: - Without block for truss width 60 mm (e.g. for INP) - With block (small side inside) for truss width: 50 mm (INP or box profile) - With block (large side inside) for crosshead width: 40 mm (INP or box profile) General information about the article: This item is offered for pickup only. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: new, The scope of delivery includes: 01x shim, new Manufacturer: Stow Material color: sendzimir galvanized Total width: approx. 120 mm Gijdpfstda Sdox Abdol Total depth: approx. 140 mm Material thickness: 3 mm Weight: approx. 0.38 kg | pc. Currently available in stock: approx. 2,610 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.