Used Nail Plate for sale (12,923)

Condition: used, Technical details: sheet width: 2300 mm plate thickness: 6 mm bending capacity max. - round: nicht bekannt mm distance between columns: 3210 mm roll dia. top roll: Ø 190 mm side roll diameter: Ø 150 / 2 Stück mm Giodpfxou Icd Tj Abdel dimension machine xH: 3,55 x 1,2 x 1,6 m weight of the machine ca.: 2,3 t total power requirement: 9 kW Steel frame double T beam welded top roller: with running; adjustment= length 150mm via hand toggle; support block can be folded out for opening side rollers: motor driven; adjustment=fixed *

Condition: good (used), Year of construction: 1987, machine/vehicle number: 6003-87, Offer 24203 Technical Data Godpfxex S En Do Abdoil - Two driven lower rollers, each roller individually motor-controlled - For pre-bending - Side supports or swing-out bearing pedestals - Motorized lifting and lowering of the upper roller - Operation via separate control panel - Max. working width: 2050 mm - Max. sheet thickness at 400 N/mm²: without pre-bending 4 mm; with pre-bending 3 mm - Smallest possible bending diameter: approx. 400 mm - Upper roller diameter: 150 mm - Each lower roller diameter: 140 mm - Drive power per lower roller: 400 V / 7.5 kW - Working speed: approx. 5 m/min - Working speed with pre-bending: approx. 0.5 m/min - Space requirement: approx. W 3300 x H 1500 x D 1300 mm - Weight: approx. 2.5 t

Condition: excellent (used), Year of construction: 2001, overall weight: 1,530 kg, total length: 2,020 mm, total width: 980 mm, total height: 1,070 mm, 3 roll plate bender SCHRODER FASTI - 136 MACH-ID 9314 Make: SCHRODER FASTI Type: 136 Gedpfx Asx Ew Iisbdsil Control: CR 80 SPS Year: 2001 Harned rolls Minimum work piece diameter 200 mm  Rolling 1,25 x top roll diameter Top and Bottem roll Driven Rolls 700 N/mm2 tensile strength CR-80 SPS Control Highlights of the CR 80 SPS controlThe CR 80 control offers a very comfortably and userfriendly programming. Depending on the program,it is possible to make variable radii without bendingmarks. The calculation of diameters when producingpipes is done automatically.The positioning of bending wheels, sheet feeding andback roll adjustment are frequency-controlled (only incombination with three-roll drive).Products e.g.: Pipes, silencers, triangles, squares Rolling width: 1040mm Rolling thickness 5x toproll Ø:6.5mm Top Roll Ø: 160mm Bottom Roll Ø: 160mm Side roll Ø: 160mm Length: 2020mm Width: 980mm Height: 1070mm Weight: 1530kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, Year of construction: 1996, Used 3-roll plate bending machine by BIKO / FACCIN Model: 3HCD 2018 Capacity: 2050 x 8 mm Gjdpfx Aex Dl Huobdjil Top roll: ø 180 mm Equipped with swing-out bearing

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: on a solid base frame, with vice -Clamping surface: 2000 x 1000 mm -Table height: 925 mm -Plate thickness: 115 mm Gsdpfx Aoxm Sagjbdoil -Vice: clamping jaws: 150 x 30 mm clamping width 250 mm -Transport dimensions: 2480/1000/H1110 mm -Weight: 1850 kg

Year of construction: 2009, condition: ready for operation (used), Technology version: HTS-RD61, working length: 4300mm, max. sheet thickness: 6mm, max. operating pressure: 300bar, safety distance: 10mm, weight: approx. 12500kg, cut counter: approx. 260000. Documentation available. On-site inspection is possible. Gedpfxjx Syw Tj Abdoil

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Gsdpfx Aevc Amtjbdjil Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: good (used), Year of construction: 2004, machine/vehicle number: 69839, Offer 25493 Technical data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Powered backgauge up to: 1000 mm - Rear area secured with light barrier - Front squaring arm: 1000 mm - HSLX version features: - CNC control HACO SC 5 controller (sheet thickness input in mm) - Automatic cutting angle adjustment by sheet thickness Gsdpfx Absx D Uzzedoil - Cutting length limitation - Automatic positioning of the backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction - Option for powered backgauge adjustment via 2 push buttons - Drive: 400 V / 22 kW - Electric foot pedal - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 9000 kg - The machine has been welded in various places by the previous owner and has only been repainted on the front side.

Condition: used, table length 1000 mm table width 660 mm table height 870 mm Gjdpfx Aeu Sbf Dsbdeil total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: ready for operation (used), Heavy hydraulic press Giedpou R U Szjfx Abdsl

Condition: good (used), Clamping plate, welding table, welding table, straightening plate -Width: 710 mm -Length: 1010 mm -Height: 840 mm -Surface: milled -partially with threaded holes -Sheet thickness: 65 mm Gisdeb Hix Eopfx Abdel -Massive -Weight: 410 kg

Year of construction: 1986, condition: ready for operation (used), A plate heat exchanger WMW is available. Heating medium: steam, cooling fluid: water, temperature range: 15°C-90°C, flow rate: 2000l/h, steam quantity: 300kg/h, weight: approx. 355kg. An on-site inspection is possible. Gedex Syv Nopfx Abdjil

Condition: used, Technical details: floor-plate length: 4000 mm plate width: 1300 mm plate height: 190 mm Plate thickness: 95 mm weight of the machine ca.: 4,15 pro Platte t Giodpou N D Ipjfx Abdsl transport dimensions LxWxH: ca. 4,0 x 1,3 x 0,2 / pro Platte m very good steel plate for sale free, packed in oiled paper and foil AP 4000x1300 - ground steel plate Ra 0.8 Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 100mm; center distance: 100mm (without attached 4x stop swivel) *

Condition: good (used), Year of construction: 2000, sheet width 3050 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 - 8.0 mm down holder 13 Stück distance between columns 3070 mm cutting angle 1.0 - 4.0 ° no. of strokes ~ 22 Hub/min Control ELGO P8511 oil volume 240 l voltage 400 V total power requirement 15.0 kW weight 8000 kg range L-W-H 3550 x 2350 x 1900 mm good / well-maintained condition with special accessories (!!) Equipment: - NC electro-hydraulic guillotine shears - heavy / stable welded construction (machine body) - NC ELGO digital control unit "P8511" - NC electro-motorized backgauge on ball screws - electro-hydraulic cutting angle adjustment * Front analog cutting angle display - 1x stable side stop, with T-slot and mm scale - 3x stable support arms, with T-slot and mm scale - Ball castors in the work table incl. recessed grips - Front finger guard - can be folded up at the front Gijdox Emqyspfx Abdel - 1x freely movable foot switch - 2x front EMERGENCY OFF button - Operating instructions (PDF)

Condition: used, Year of construction: 2014, length 1200 mm Gedpfx Ajv Ig Acobdeil width 800 mm Thickness 160 mm

Condition: used, Technical details: Godpfxou R A A Uj Abdsil floor-plate length: 640 mm plate width: 330 mm Plate thickness: 65 mm

Condition: used, floor-plate length 1050 mm floor-plate width 1050 mm floor-plate height 60 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 1050x1050x0,1 m Godpfxju Sbfko Abdeil table plate of PFSU 1600, Ø 1050 mm

Condition: used, Technical details: sheet width: 1500 mm plate thickness: 2,25 mm Gedpfju Icn Esx Abdjil distance between columns: 1600 mm back gauge: nein cutting angle: nicht bekannt ° cutting gap adjustment: nein mm down holder: über Druckleiste Stück height over floor: 850 mm Table dimensions: LXB 1800 x 350 mm weight of the machine ca.: 0,85 t dimensions of machine: 2,0 x 0,8 x 1,3 m simple mechanical guillotine shear with shelf right/left 305 x 100mm operation via ON/OFF *

Condition: used, length 400 mm width 270 mm weight of the machine ca. 0,02 t dimensions of the machine ca. 0,4x0,27x0,03 m Giedpfod Iha Rsx Abdsl

Condition: used, Technical details: Length: 400 mm width: 200 mm weight of the machine approx.: 24 kg Gedpfxeu Nklhe Abdsil dimensions L x W x H: 0,4 x 0,22 x 0,08 m MAGNETIC CLAMPING PLATE Magnetic core quantity 21 pieces, width 4x60mm and 1x80mm, distance to each other 80 / 90mm. The plate has a T-slot guide on the side. (WidthxDepth: 16 / 5mm) *

Condition: used, Technical details: lapping tool diameter: Ø 1000 mm material thickness: Auftrag ca. 8,0 mm Plate thickness: ca. 75 mm internal diameter: 400 mm Weight approx.: 0,37 t dimensions: 1,2 x 1,2 x 0,3 mm boring diameter: Ø 290 mm Flange mounting: Ø 320 mm This work wheel can be used, for example, on a disk sanding, fine sanding and/or lapping machine. Gisdpou Uzzusfx Abdjl Application: Material removal for “gentle” processing of the workpiece surface, as well as keeping the tools flat The pattern (honeycomb) improves stock removal due to the additional cutting edges. This results in a good surface finish and evenness. Diamond and CBN lapping wheel/lapping plate Die Mittenbohrung Ø 290 mm weist eine Senkung mit Bohrung Ø 400 mm x 47 mm Tiefe auf. Verpackt in Holzkiste 11500 x1150 x 166 mm. *

Condition: used, Year of construction: 1960, Technical details: sheet width: 2000 mm plate thickness: 4 mm distance between columns: 2070 mm roll dia. top roll: Ø142 (getrieben) mm diameter of lower rolls: 1. Walze Ø 145 (getrieben) mm diameter of lower rolls: 2. Walze Ø 145 (mitlaufend) mm adjustment of lower rolls: manual/mech./hydr.: 1. Walze ca. 20 mm von Hand adjustment of lower rolls: manual/mech./hydr.: 2. Walze ca. 180 mm von Hand height over floor: 950 mm total power requirement: ca. 4,0 kW dimension machine xH: 3,0 x 1,0 x 1,2 m Godpfou Icfwsx Abdeil weight of the machine ca.: ca. 2,5 t Mechanical 3-roll plate bending machine Operation: Hand switch / foot switch forward/backward 2x EMERGENCY button *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3460 mm no. of strokes: min./max.: 9 / 17 Hub/min back gauge: 750 mm (motorisch) mm cutting angle: 0,5° - 3,0° ° Giodpou Rni Hsfx Abdsl cutting gap adjustment: manuell mm down holder: 18 Stück (hydraulisch) Stück Table dimensions: 380 x 3100 mm total connected load: 7,5 kW weight of the machine ca.: 4,56 t dimensions of machine: L: 2,3 x B: 3,7 x H: 1,8 m Equipment: With side stop L: 1000 × W: 100 × H: 60 mm and stop bar 990 mm, with 8 supports Operation via control panel and foot switch Cutting zone lighting Stroke counter Machine feet *

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: Gisdpfx Abou Icpcodel - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: used, Year of construction: 1992, Technical details: sheet width: 3000 mm plate thickness: 2,0 mm distance between columns: 3300 mm back gauge: 580 manuell mm cutting angle: Nein ° cutting gap adjustment: Nein mm down holder: 13 Stück Table dimensions: 3300 x 300 mm weight of the machine ca.: 3,0 t dimensions of machine: 3,7 x 1,5 x 1,8 m incl. 2x upper knife and 2x lower knife each 1500mm incl. table supports 1500 x 1500mm with roller elements 2x profile strips L: 1400mm 1x side stop bar 1600mm operation via control panel and/or foot pedal Gijdpfx Abou Icnrjdel *