Used Okuma Lb 9 for sale (228)

Year of construction: 2007, condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Cedpsku Aaajfx Al Ajhc Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 0537, CNC: OSP-U100L X-axis: 1050 mm Y-axis: 560 mm Z-axis: 460 mm Table size: 1300 x 560 mm Number of tool pockets: 32 Spindle taper: BT50 Cjdpexlta Eefx Al Ashc Max spindle speed: 12,000 rpm Spindle motor power: 15 kW Machine dimensions: H=3200 x W=3000 x L=3400 mm Machine weight: 8,000 kg.

Condition: ready for operation (used), Okuma BDU-30A Brushless Servomotor Drive Unit with E4809-045-061-D, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Codpsi D Naasfx Al Aohc

Condition: used, Year of construction: 2001, turning diameter: 210 mm, spindle bore: 53 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 700 mm, rotational speed (max.): 6,000 rpm, overall weight: 6,500 kg, distance table center to spindle nose: 960 mm, OKUMA OSP-U100L control unit, with TOP AUTOMAZIONI XF370 bar feed system. Cjdpfx Alszw Nu Nj Ajhc Workholding and tooling are not included. MUST BE PICKED UP BY SEPTEMBER 2026.

Condition: excellent (used), Year of construction: 2008, CNC lathe Okuma LU35-M-2ST-600 Csdpfxeylique Al Ajhc Control system: OSP-P200L Year of manufacture: 2008 Internal machine number: 25 Max. turning diameter: 550 mm Max. turning length: 600 mm Bore diameter of spindle: 90 mm Spindle speed: 3,200 rpm Main spindle: 30 kW A-turret: 12 stations (all powered) B-turret: 10 stations Tool holder: VDI 50 Accessories Chuck Kitagawa N15 Chip conveyor Interlit Including external coolant system Door automation Touch setter

Condition: excellent (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 660 mm, controller manufacturer: OSP200, rotational speed (max.): 8,000 rpm, operating hours of spindle: 5,000 h, number of slots in tool magazine: 32, Equipment: chip conveyor, 8,000 rpm Cjdpfszzbk Rsx Al Aohc OSP200, Fusion360 IGF Coolant through spindle 4th axis Kitagawa 250mm Available immediately In very good condition

Condition: used, Year of construction: 1998, X/Y/Z - 1000/800/810 mm Pallet size 630 x 630 mm Distance between pallet & spindle 50-850 mm Pallet indexing 1 degree. Spindle taper BT 50 Spindle speeds 50-5000 rpm Chodsz H H Sbspfx Al Ajc Pallet changer w/6 stations No. of stations in changer 150 pcs. High pressure coolant through spindle Control: OSP-U100 Equipped with: 10 toolholders Chip conveyor Pallet changer w/6 stations 6 pallets

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, CNC turning and milling center Okuma Multus B300 Control: OSP-P200L Year of manufacture: 2007 Internal machine number: 60 Travel ranges: X-axis 690 mm Y-axis 230 (-115 to +115) mm Z-axis 1,545 mm B-axis 0.001 ° C-axis 360 ° W-axis: 1,550 mm Max. turning diameter: 710 mm Tool holder: HSK 63 Total number of tool positions: 40 Spindle speed: 38 – 3,800 rpm Equipment / Accessories - Chip conveyor - 3-jaw chuck SMW KNCS-N-260-72 Chedpfx Aszwl S Rol Asc - Compact paper band filter system 500 l - One Touch IGF

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Codpfxoyvfhde Al Ashc Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: excellent (used), Year of construction: 2012, operating hours: 6,100 h, functionality: fully functional, Control unit: OSP-P200MA-R Table dimensions: 1000 x 460 mm Table load: max. 700 kg X-axis travel: 762 mm Y-axis travel: 460 mm Z-axis travel: 460 mm Cedpfx Ajy T I U Aol Ashc Distance between spindle nose and table surface: 150 – 610 mm Spindle speed: 15000 rpm Rapid traverses: X/Y: 40 m/min, Z: 32 m/min Drive power: 22 / 18.5 kW Taper: BT40 / MAS 403 Tool magazine: 32 stations Max. tool length: 300 mm Max. tool weight: 8 kgs Max. tool diameter: D80 mm Weight: 6800 kgs Dimensions (L x W x H): 2810 x 2225 x 2750 mm Accessories / Equipment: - MAYFRAN chip conveyor - Coolant system - Spindle cooler - Transformer - Mac NAVI - Machine feet - Documentation The machine is being sold due to company liquidation. It is still under power in Hungary.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, maximum turning diameter: 2000 mm maximum turning length: 1400 mm control: Okuma OSP - P300 SA maximum workpiece weight: 10,000 kg maximum workpiece dimensions: 2000 mm x 1400 mm chuck diameter: 2000 mm C-axis positionable to 0.001° tool spindle traversable in X/Y/Z and indexable in B B-axis swivels 150° Y-axis travel: 1600 mm (+/- 800 mm) coolant supply through tool spindle automatic dual pallet changer tool stations: 60, HSK 100 Chodpfxsywg Aas Al Asc The complete equipment of the machine can be found in the .pdf file.

Condition: excellent (used), Year of construction: 2014, CNC turning and milling center Okuma Multus U4000 1SC 1500 BigBore Control: OSP-P 300S Year of manufacture: 2014 Internal machine number: 35 X-axis: 695 mm Y-axis with travel: +150/ -150 = 300 mm Z-axis: 1,600 mm B-axis: 240°, positioning in 0.001° C-axis: 360°, positioning in 0.001° Turning diameter: 650 mm Turning length: 1,500 mm Tool holder: Capto C6 Total number of tool positions: 80 Accessories: NC tailstock Adjustable hydraulic steady rest AX 5 on NC axis Coolant system with strip filter Hydraulic 3-jaw chuck Kitagawa BB 212-11 Automatic touch probe High-pressure coolant IKZ Software option High Cut Pro (High-precision package with Super Nurbs) CAS collision protection system Spindle orientation, main spindle, electric Multitool including turning function for Y-axis Helix function Chjdpfxoyk Ddge Al Aec Automatic main power cut-off DNC-DT interface Machining Navi M-i (milling), speed control for minimizing vibrations. One-Touch IGF Chip conveyor

Condition: ready for operation (used), operating hours: 11,525 h, functionality: fully functional, machine/vehicle number: 0613, travel distance X-axis: 1,500 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 610 mm, controller model: Okuma OSP7000M, spindle speed (max.): 5,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Chsdpfsztpmdex Al Aoc Working area Travel in X-axis: 1,500 mm Travel in Y-axis: 630 mm Travel in Z-axis: 610 mm Distance from spindle nose to table surface: 230–840 mm Distance from spindle center to front of column: 730 mm Main spindle Spindle speed range: 10–5,000 rpm Continuously variable speed control Spindle taper: 7/24, No. 50 Tool holder: BT50 Angle: 90° Diameter of front spindle bearing: 100 mm Work table Effective table size: 1,530 × 630 mm Table size: 1,800 × 780 mm Maximum table load capacity: 1,500 kg T-slot width: 18 mm Number of T-slots: 5 T-slot spacing: 125 mm Distance from table surface to bottom edge of machine bed: 830 mm Feeds Rapid traverse X/Y-axis: 15,000 mm/min Rapid traverse Z-axis: 13,000 mm/min Cutting feed X/Y/Z-axis: 1–10,000 mm/min Average continuous cutting feed: 1–2,000 mm/min Tool changer Number of positions in tool magazine: 20 Tools included in the machine MACHINE DETAILS Control model: Okuma OSP7000M Operating hours (as of 12.04.2026) Power-on hours: 59,180 h Operating hours: 16,510 h Machining hours: 11,525 h Dimensions & weight Machine dimensions (L × W × H): 4,570 × 4,530 × 3,265 mm Weight: 11 t EQUIPMENT Kitagawa NC rotary table TSR180A Handheld terminal Mac mini IH Oil skimmer Chip conveyor Tools included in the machine Machine manuals Original tolerance reports Parameter backup / Backup of machine parameters

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Controller: OSP-100L, IGF Turning length: 200 mm Chjdpfx Ajwufc Tol Aec Turning diameter: 280 mm Sloping bed: No Spindle bore: 62 mm Turret head: Yes, 12 positions VDI 40 Travel X-axis: 210+845 mm Travel Z-axis: 360 mm Swing over bed: 320 mm Spindle speed: 40-400/min Main motor power: 15 kW X-axis rapid feed: 60 m/min Z-axis rapid feed: 30 m/min Machine weight: 6000 kg

Condition: used, Year of construction: 2001, 7-axis turning and milling center Manufacturer: OKUMA Type: MacTurn 50 Year of manufacture: 2001 Control: OSP-U100L Spiral-circular interpolation Upper turret HS ATC: X1 = 598 mm Z1 = 1,660 mm Y = 230 mm, +110 mm, -120 mm C = 360/0.001 B = 360/1 indexed Turning diameter max.: 610 mm Turning length Z1 min.: 1,500 mm Swinging diameter: 610 mm Turning diameter over cross slide: 580 mm Distance between centers approx.: 2,000 mm Tool holders: BT50 Driven tool holders BT50 = 40 - 3000 rpm ATC magazine 72 BT50 For turning: ≈ 36 Driven tool holders: ≈ 36 Lower turret V8: X2 = 200 mm Z2 = 1,045 mm Turning diameter max.: 380 mm Turning length Z2 = 1,045 mm Swinging diameter = 380 mm Tool holders: VDI40 Turret: 8 positions VDI40 Spindle: Speed range: 14 - 2800 rpm at 37 kW Chuck: D400mm Spindle bore: 110 mm Spindle nose: A2-11 Torque approx.: 2,000 Nm Coolant system with 40 bar pump New screen New panel Several BT50 tool holders Cedpsz D I Ifefx Al Aehc Weight approx.: 20 tons Space requirement L/W/H: 8,000 x 3,500 x 3,500 mm 51026ä

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 625 mm, Machine type: Horizontal machining center Manufacturer: OKUMA Type: MA-400HA Year of manufacture: 2008 Control system: OSP P200M Country of origin: Japan Delivery time: short-term, by arrangement 4-axis machining center, high productivity, including various accessories Machine equipment: - ConSep chip conveyor system with high-pressure pump - Various software packages - Touchsetter with length measurement and breakage detection - Work area shower Technical details: - Travels - Axes X-axis (column right-left) mm 560 Z-axis (table forward-backward) mm 625 Y-axis (spindle up-down) mm 610 B-axis 1° 0 - 360° - Number of pallets: 2 (pallet changer for 2 pallets) - Pallet size (mm): 400 x 400 - Max. pallet load capacity (kg): 400 - Max. pallet workpiece dimensions (mm): 500/600 x 710 - Spindle speed (rpm): 15,000 - Main spindle (10min/cont): 22/18.5 kW - Tool holder: BT40 - Tool magazine: 60 positions Optional: - Transport organization and execution - Machine delivery and installation - Machine commissioning Cedszm U Ndjpfx Al Ashc

Condition: excellent (used), Year of construction: 2015, Okuma GENOS L200E-MY CNC Lathe Technical Data Manufacturer: Okuma Model: GENOS L200E-MY Control: OSP-P300L-R Voltage: 400 V Phases: 3 P Frequency: 50/60 Hz Connected load: 15.3 kVA Rated current: 25.6 A Short-circuit withstand capacity: 2.5 kA Max. turning diameter: Ø 200 mm Max. turning diameter x length: Ø 200 x 380 mm Swing over bed: Ø 450 mm Swing over cross slide: Ø 300 mm Workpiece weight (single-sided support): 120 kg Spindle diameter: Ø 100 mm Spindle nose: JIS A2-6 Spindle bore: Ø 66 mm Spindle speed range: stepless Spindle speed: 75 to 3000 rpm Number of tool stations: 12 Turret type: Multitasking V12 turret Tool holder, external turning tools: 20 x 20 mm Tool holder, internal turning tools: Ø 32 mm Rotating tool speed: 6000 rpm Travel (Z-axis): 400 mm Travel (X-axis): 165 mm Travel (Y-axis): 80 mm Feed range: 0.001 to 1000 mm/rev Codpfx Aoy R A N Ajl Aohc Rapid traverse Z-axis: 25000 mm/min Rapid traverse X-axis: 20000 mm/min Rapid traverse Y-axis: 10000 mm/min Tailstock quill diameter: Ø 55 mm Tailstock quill stroke: 80 mm Machine height: 2040 mm Footprint: 2120 x 1750 mm Machine weight: 4800 kg Year of manufacture: 2015 No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: used, Year of construction: 2014, Technical details: x-travel: 760 mm y-travel: 760 mm z-travel: 760 mm b-axis: 360.000 x 0.001 ° spindle drive: 26 / 18,5 (40% / 100%) kW spindle turning speed range: 50 - 15000 U/min Tool bore: KSK-A63 max. table loading capacity: 500 kg total power requirement: 43 kW weight of the machine ca.: 11,5 t Chsdpfx Aexrwpdjl Ajc dimensions of the machine ca.: 2,7 x 4,73 x 2,87 m

Condition: used, Year of construction: 2004, Technical details turning diameter 210 mm turning length 700 mm control Okuma OSP-E 100 L total power requirement 35,7 kVA weight of the machine ca. 7,1 t dimensions of the machine ca. 2660 x 2000 x 2330* mm Additional information CNC turning and milling center with C-axis and Y-axis, 2 turrets, and subspindle. The machine is being sold partially overhauled. CNC control: Okuma OSP-E 100 L Maximum turning diameter: 210 mm Swing over bed: 400 mm Distance between spindle noses: 960 mm Main spindle: Spindle bore: 53 mm Speed range: 50 to 6000 rpm Motor power: 11/7.5 kW Subspindle: Spindle nose: JIS A2-6 Speed range: 38 to 5000 rpm Motor power: 11/7.5 kW Z-axis: Travel: 700 / 700 mm (ZA + ZB) Rapid traverse: 40000 mm/min Chedpozzwmuofx Al Asc W-axis: Travel: 940 mm Rapid traverse: 40000 mm/min X-axis: Travel: 167 / 192 mm (XA + XB) Rapid traverse: 30000 mm/min Y-axis: Travel: 92 mm (+50/-42 mm) Rapid traverse: 15000 mm/min C-axis: Indexing: 360 x 0.001 deg. Rapid traverse: 400 rpm Disc turret: 2 x 12 stations Tool holder mount: VDI 30 mm Power of driven tools: 4 kW Total connected load: 35.7 kVA Machine weight: 7100 kg Machine dimensions: 2660 x 2000 x 2330 mm* Plus swarf conveyor and bar loader Accessories FMB Turbo 5-42/6200/A bar loader, year of manufacture 2005 Chip conveyor Coolant system Collet chuck for main and subspindle Both turrets equipped with tool holders Machine documentation.

Condition: used, Year of construction: 2001, functionality: fully functional, CNC turning and milling center Okuma MacTurn 30 Control system: OSP-U100L Chedpfx Aezwl Raol Aoc Year of manufacture: 2001 Internal machine number: 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Diameter of rotation over the machine bed: 500 mm Diameter of rotation over the tool slide: 500 mm Tool holder: SK 40 Tool positions: 60 positions Travel ranges: X-axis: 430 mm Y-axis: 190 (+/-95) mm Z-axis: 1,090 mm C-axis: 0.001° - 3-jaw chuck SMW Autoblok - Programmable tailstock - Chip conveyor - Paper band filter system with high-pressure pump - Oil mist extraction system - Touchsetter - One Touch IGF - Door automatic - Large chuck package - Large tool package

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Chsdpsy Drunjfx Al Aec Swarf Conveyor Okuma OSP 7000L Control

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Chodpfx Aoyn Em Rjl Asc Speedrange: 6000Rpm Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2012, CNC Lathe Okuma Genos L200E-M with Gantry Control: OSP-200LA-R Year of manufacture: 10/2012 Internal machine no.: 13 Max. turning length: 380 mm Turning diameter: 200 mm Swing over bed: 450 mm Chjdpsylkcrofx Al Asc Spindle speed: 107 - 4,500 rpm Spindle bore: 66 mm Turret: M-V12 (VDI) Tool rotation speed: 50 - 6,000 rpm Rapid traverse (m/min): X: 20 / Z: 25 Accessories/Equipment Gantry loader type ATPGR-03 for workpiece size Ø 20 - 150 mm, max. workpiece weight 2 x 3 kg (double gripper) for OKUMA Genos L200E-M Chip conveyor Touchsetter Hydraulic tailstock Coolant pump Tool package

Condition: excellent (used), Year of construction: 2011, CNC Lathe Okuma Genos L300E-M incl. bar feeder Samsys M3000SL Control: OSP-P200L-R Year of manufacture: 2011 Internal machine number: 14 Turning length: 1,250 mm Turning diameter: 300 mm Spindle bore: 70 mm Turret: 12 stations – all driven Spindle speed: 45 – 4,500 rpm Tool holder: VDI 40 Accessories/Equipment - Chip conveyor - 3-jaw chuck Ø 250 mm - Hainbuch collet chuck - Touch setter - Tailstock Chedpfx Asyli T Nsl Aoc - Coolant pump - Bar feeder Samsys Multi 3000SL - Various accessories (see pictures)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,563 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP-P300M, table load: 900 kg, overall weight: 7,000 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 32, number of axes: 3, This 3-axis Okuma M560-V was manufactured in 2016. It features a generous X-axis travel of 1050 mm, Y-axis travel of 560 mm, and Z-axis travel of 460 mm. The machine is equipped with a powerful 22 kW spindle and a tool magazine that holds 32 tools. If you are looking to get high-quality machining capabilities, consider the Okuma M560-V vertical machining centre we have for sale. Contact us for further details. Cedpfx Ajy Nb T Djl Ajhc • Table size: 1300 × 560 mm