Used Paint Wall for sale (9,600)

Condition: excellent (used), Servatechnik extraction Bcedpfxjx Nbnne Abdjw

Year of construction: 2011, condition: excellent (used), This is a complete plant for house construction. Prices are listed with each item. Consisting of the following individual elements (see attached document as well): Photos will follow, they are already included in the attached document. Table 1 (Positioning and clamping of the frame structure) €34,500 - Elevating longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Table 2 (Applying the first sheathing and fastening) €25,300 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 3 (Applying the second sheathing, fastening and turning the element onto the next table) €35,650 - Longitudinal conveyor with 3 hinge conveyors and sheathing - Pneumatic cross clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Electrical installation and insulation) €34,500 - Cross conveyor with rollers and sheathing - Table traverse drive - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Applying the first sheathing and fastening the second side) €32,775 - Longitudinal conveyor with 3 hinge conveyors - Cross conveyor with rollers - Pneumatic cross clamping - Connections for compressed air and electricity Intermediate conveyor 3 m long €4,600 (Parking station for multifunctional bridge) - Longitudinal conveyor with 3 hinge conveyors Table 6 (Applying the second sheathing and fastening) €28,750 - Longitudinal conveyor with 3 hinge conveyors - Pneumatic cross clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal conveyor with 3 hinge conveyors - Hydraulic tilting unit - Table traverse mechanism - Upper guide for holding the walls vertically Manual surface gantry with vacuum lifter on Table 2 €13,800 (Applying the first layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 3 €13,800 (Applying the second layer of sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 5 €13,800 Bodpfx Asu D Amgebdscw (Applying the first layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Manual surface gantry with vacuum lifter on Table 6 €13,800 (Applying the second layer of sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel substructure with low-friction rails - Travel range 12 x 5 m Wall storage 1: 12 m long x 24 tracks €11,500 Wall storage 2: 12 m long x 20 tracks Vacuum lifter with column slewing crane €9,200 1 cross beam 2 t Abus €20,125 1 cross beam 2 t

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Excellent condition/ready to work. Bjdpoxc Dtqofx Abdjcw

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: MIKAOG1+2, 1 Demag KBK II wall-mounted slewing jib crane, 80 kg safe working load / lifting capacity Crane available 2x! Jib length 3m, 80 kg capacity With Demag DC chain hoist, 80 kg capacity Weight incl. wall bracket approx. 150 kg Complete with chain hoist, festoon system, trolley, and small parts Slewing range 270° Item location is 75053 Gondelsheim Bedex U Nqbjpfx Abdjcw Unit is completely dismantled and immediately available Shipping via freight forwarder or collection Please inquire about shipping costs based on ZIP code

Condition: used, Used paint mist extractor with 2 side baffles with 2 fans Bedpfjwka Naox Abdocw otherwise as shown in pictures Availability: Short term Storage location: Röllbach

Condition: used, A used steel stacking container is made of hot-dip galvanized steel and built according to the standard Euronorm dimensions of 800 × 600 mm. With a generous capacity of 206 liters, the container offers ample storage space for heavy, loose, or bulk products. Bcjdpox Huf Ujfx Abdsw The closed, profiled walls and bottom reinforce the construction and provide

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Vertical / horizontal inspection station 2600 x 4000 mm optional with extended tilting conveyer table for loading / unloading Bodpfx Abjyiymusdscw

Year of construction: 1998, condition: excellent (used), machine/vehicle number: WIT33, 1 Pfeiffer wall slewing crane 2000 KG payload / lifting load Outreach about 6m, 2000KG 2to payload with Demag DC chain hoist 2000KG (2 lifting speeds) from BJ 2015 Trolley travel + swiveling electrically Total weight around 1800 kg Year of construction 1998 Crane is still being cleaned from the foundry dust Complete with wall brackets, outriggers, chain hoist, drag cable, chassis and small items Pivoting range approx. 180° Item location is 75053 Gondelsheim Plant is completely dismantled and immediately available See pictures Shipping by forwarding agent or pick-up Please inquire about shipping costs according to zip code Bcedpfjk Iyqmsx Abdsw

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Bedoxa H Ewjpfx Abdscw It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. Bsdpewzmcbofx Abdocw FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. Bcodpfxjwzl Hxj Abdew * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Year of construction: 2021, condition: used, functionality: fully functional, Fully refurbished carousel painting plant in 2023, compliant with Industry 4.0 standards featuring Siemens interconnection. Composition: 3-stage washing (hot phosphating + double cold rinse) Drying tunnel with independent combustion chamber Painting booth with reciprocators, Gema guns, Nordson filter Bodpfxsxrl U Ie Abdjcw Touch-up station before and after reciprocators Curing oven with independent combustion chamber Workpiece dimensions: H 2100 mm – W 2000 mm – D 780 mm. Complete, overhauled, and ready-to-use plant.

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. Bjdpfx Abox H Rhredjcw - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Condition: good (used), Company and yard filling stations in sizes from 2,000 liters to 7,000 liters - multiple available, - used, - double-walled, Bjdpfjil Hmuex Abdecw - cleaned, - with DEKRA approval on request, - pump or dispenser optional Loading and transport can be organized. Only serious and serious inquiries will be answered: Name, e-mail address and telephone number.

Condition: excellent (used), functionality: fully functional, Dies for rain gutter and accessory production lines We offer PVC extrusion dies for: -production of rain gutter systems, including the Royal Dual Wall Gutter and Gutter 125, Bedpfx Abjydbl Ujdscw -corners, elbows, and other PVC accessories, -other structural and construction elements made of PVC. Available die types: -Royal Dual Wall Gutter die -Gutter 125 die -Other dies for accessories and gutter systems -Royal Dual Wall Gutter system Features: -Made of high-grade, wear-resistant tool steel -Precise shape forming -Adjustable die parameters to meet production requirements -Compatible with PVC granulation and extrusion lines NOTE: For detailed information about the dies and products, please contact us.

Condition: new, Year of construction: 2024, Surfaces (mm):1600 x 1600 Air performance (m3/h): 5000 Suction pipe diameter (mm): 350 Height (mm): 2600 Bodpfsuyh R Ajx Abdocw Depth (mm): 600/800

Condition: used, This is a pallet offer of 50 per block pallet. Bedpewt Txysfx Abdscw Plastic stacking bin measuring 600 x 400 x 230 mm. This bin has a Euronorm of 600 x 400, making it compatible with standard pallets, racks and other logistics systems. Manufactured from HDPE (High Density Polyethylene), this bin is resistant to shocks, chemicals and

Condition: used, A pallet offer consisting 20 plastic stacking bins with Euronorm dimensions of 600 x 400 mm and a generous capacity of 77 liters is. A practical and durable solution for storage and transport. Made of strong polypropylene, the bin can withstand temperatures from -20°C to +80°C, making it suitable for a variety of environments. Bjdsvyqyiopfx Abdecw

Condition: used, Used and robust steel stacking bin, also known as construction storage pallet, is specially designed for safe and orderly storage of heavy and bulky materials on construction sites, in workshops or industrial environments. With a generous size of 1260 x 860 x 750 mm, this bin offers a sturdy and spacious storage solution that can take a Bedpox Ahv Nofx Abdjcw

Condition: used, A batch of 45 used plastic Agricrates, better known as Euronorm stackable containers. Bcsdpsx Ahvcjfx Abdsw A versatile and durable storage solution for various sectors, such as agriculture, distribution, retail, and manufacturing. Thanks to the standardized Euronorm dimensions of 600x400 mm, this container is ideal for use on pallets, in racks, and in

Condition: used, Pallet offer consisting of 70 pieces of used plastic stacking bins with the standard dimensions of 600x400 mm according to Euronorm, making it suitable for standardized logistics applications, such as pallets and racking. Bcsdpfx Abjx Ahrqjdsw With a capacity of 30 liters, the bin provides sufficient space for the storage and transport of goods. Made of

Condition: used, Batch offer consisting of 40 used Euronorm stacking bins measuring 600 x 400 mm and with a capacity of 41 liters. Bcsdjx Ahpvopfx Abdjw A practical and versatile solution for storage, transport, and internal use in a wide range of sectors. The storage container is made of high-quality polypropylene (PP), a sturdy and lightweight material that can

Condition: used, The large-volume bin is designed for robust and versatile use, with a capacity of 1400 litres. This bin is made of recycled polypropylene, contributing to sustainability and environmental friendliness. The bin can withstand temperatures ranging from -20ºC to +80ºC, making it suitable for storage and transport in various environments, Bcjdpfxox Ahn Ej Abdew

Condition: used, Batch offer consisting of 208 used plastic Euronorm stacking bins measuring 400 x 300 mm and with a capacity of 6 liters. Bedpfx Abjx Ahp Aodjcw Specially designed for hygienic and efficient storage within the food industry. The storage container is made of food-grade polypropylene (PP), a strong and durable material that meets the highest hygiene

Condition: used, Batch offer consisting of 32 used plastic Euro-standard stacking bins. Bedpfxox Ahqae Abdocw Designed for intensive and professional use, offering a reliable storage solution in logistics, automotive, and manufacturing environments. Thanks to its Euro standard dimensions of 600 x 400 mm, the container fits seamlessly into automated systems, pallets, and