Used Paint Wall for sale (9,261)

Condition: used, maximum load weight: 13,400 kg, overall weight: 16,000 kg, first registration: 01/2007, loading space length: 7,270 mm, loading space width: 2,425 mm, loading space height: 2,740 mm, loading space volume: 48 m³, total width: 2,550 mm, total height: 2,980 mm, Year of construction: 2007, Vehicle No. G0123602_1 – Manufacturer: Spier. Iiedez A Rqaepfx Afmjg * Double corner brackets * Roller shutter door (aluminum) * Side walls with partially integrated folding tables * Forklift accessible * Front wall niche * Fixed support legs * Device for rail loading Storage container – weatherproof, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY. Technically ready for use, no further repairs required. Substructure galvanized. Isolated paint chipping on components of the demountable body. Deformations/stops on components – see pictures. Dimensions are approximate. Offer subject to change; sale is reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: used, maximum load weight: 14,000 kg, overall weight: 16,000 kg, first registration: 01/2007, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,615 mm, loading space volume: 49 m³, total width: 2,550 mm, total height: 2,930 mm, Year of construction: 2007, Wagon-No. G0119287_SAMPLE - Manufacturer: Krone. * Basic corner fittings * Forklift accessible * Front wall recess * Fixed support legs * Facility for rail loading Iiedpfxjz A Rlqe Afmeg * Lashing pockets * Lashing points Delivery time upon request! Technically ready for operation, no further repairs required. Undercarriage shows signs of use, some surface rust present. Occasional paint chipping on parts of the swap body. Isolated rust on various components of the swap bridge. Deformations / bumps on components - see pictures. Multiple available! Dimensions are approximate. Offer subject to prior sale, prices are net ex location D-59302 Oelde. Further details on request by phone or email:

Year of construction: 2016, operating hours: 20 h, condition: used, functionality: fully functional, machine/vehicle number: MT-108/2016, We are offering a used IPVET EPS/MW Custom Sandwich Panel Production Line, manufactured in 2016. The machine has seen very little use. Manufacturer: IPVET Model: EPS/MW Custom Sandwich Panel Year of Manufacture: 2015 Condition: Used Category ID: 1059 Iiodpfoyw Tmlex Afmog Type: EPS/MW Sandwich Panel Production Line The EPS/MW (Expanded Polystyrene/Mineral Wool) sandwich panel production line is suitable for the manufacture, staging, and packaging of assorted types and sizes of sandwich panels with insulation. The line includes all necessary electrical circuits, hydraulic system, and control units required for operation. The production line is capable of manufacturing the following products: - EPS roof panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - EPS wall panels with insulating thicknesses: 60mm, 80mm, 100mm, 120mm, 150mm, 200mm - MW roof panels with insulating thicknesses: 80mm, 100mm, 120mm - MW wall panels with insulating thicknesses: 80mm, 100mm, 120mm Raw materials used in production: - 0.4-0.7mm x 1250mm pre-painted, galvanized steel sheet - EPS 80 Expanded Polystyrene boards - MW Mineral Wool (Spanrock XL) - Adhesive (polyol) - Adhesive (isocyanate) Machine Units/Equipment included in the Sandwich Panel Production Line: The EPS/MW sandwich panel production line is a comprehensive system consisting of several machines and equipment. The production line comprises the following units: 2.1. Decoiler for external steel sheet with trolley 2.2. Trapezoidal roller conveyor Bobp Ergeyw Tmlocyodf 2.3. Shearing knife for cutting steel sheet 2.4. Micro-corrugation roller conveyor 2.5. Edge-forming roller conveyor for standard joint outer facing 2.6. Edge-forming roller conveyor for concealed joint outer facing 2.7. Decoiler for internal steel sheet with trolley 2.8. Shearing knife for cutting steel sheet 2.9. Micro-corrugation roller conveyor 2.10. Edge-forming roller conveyor for internal facing 2.11. EPS/MW insulation dispenser unit 2.12. Insulation material conveyor belt 2.13. EPS/MW insulation trimming knives 2.14. Adhesive application unit 2.15. Pump 2.16. Adhesive spreading unit 2.17. Laminating roller conveyor 2.18. Cutting saw 2.19. Accordion roller conveyor 2.20. Roller discharge table 2.21. Stacking and flipping unit 2.22. Transport trolley for stacking 2.23. Packaging unit 2.24. Chain conveyor unit for material handling If you have any questions or require further information, please send us a message or call us.

Condition: new, Year of construction: 2025, AL-KO Colour Jet 1 Paint Mist Extraction System Paint mist extraction system, ready for operation, with a 1 m² filter area including a pre-filter and a fine filter. Connection diameter: 300 mm, motor: 1.5 kW (suitable for installation in Zone 22 according to ATEX), switch: 1-stage, plus a 5 m cable with plug and throttle valve. Iodpfx Asbumr Sjfmjig Compact, space-saving steel sheet construction. Chassis with wheels. Indirect extraction near the floor. Completely pre-assembled. With connection cable and phase reversal device. Adjustable side panels. Optimized spray mist extraction through a patented front panel hood. Long filter life. High-performance fans with low noise levels. Filter wall with special mats. Exhaust nozzle with integrated throttle valve. Motor power: 1.5 kW Speed: 1400 rpm Nominal volume flow: 4600 m³/h Pressure: 500 Pa Dimensions (W*H*D): 1025*1437*1214 mm (W = 2000 mm with side panels) Filter area: 1 m² Weight: 175 kg

Condition: used, Year of construction: 2024, color: grey, loading space volume: 10 m³, loading space width: 2,420 mm, loading space length: 5,000 mm, loading space height: 800 mm, mileage: 1,001 km, first registration: 01/2024, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, flap, lashing points, swing-out flap. Body: Roll-off container with folding side walls and swing-out flap, approx. 10m³, in top condition! Roll-off container with folding side walls and swing-out flap - Manufacturer: RM | Type: ABPR - Built according to DIN 30722-1 - Internal length 5m Iijdpozrf Tkefx Afmog - Internal height 0.80m - Internal width 2.42m - Floor: 5mm Hardox 450 - Folding, spring-loaded, and drivable swing-out flap (4.5t point loads) - Side walls folding and spring-loaded - All-around net hooks - 2K paint RAL 7016 anthracite gray All information is without guarantee as the container is currently en route! ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey, Price available upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible.* 4 units, 6000 mm, available in the short term, RAL colors of your choice. 2 units, 6500 mm, available directly from the warehouse, RAL 7043. 7000 mm available in approximately 4-6 weeks, RAL color of your choice. Other designs and sizes available from the Paderborn warehouse. You can view our stock levels on our website. Roll-off container platform according to DIN. Technical description: * Dimensions 6000 mm: 6000 x 2550 mm internal dimensions * Dimensions 6500 mm: 6500 x 2550 mm internal dimensions * Tare weight 6000 mm: 1,720 kg * Tare weight 6500 mm: 1807 kg * Longitudinal beams INP 180, spacing according to DIN 30722 Iisdpsz Arq Dsfx Afmjg * Tear plate floor 5 mm S 235 * Including 8 lashing eyes in the floor plate, loadable up to 2.5 t * Front wall height 1500 mm * Hook Ø 50 mm S355 * According to DIN 30722, including testing according to DGUV rule 114-010 * Steel roller bearings 159 x 6.3 mm, length 300 mm * Zinc phosphate primer and coated with synthetic resin paint * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 7,000 mm, total width: 4,000 mm, total height: 3,130 mm, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, Equipment: cabin, The automotive spray booth is a fundamental device in paint repair technology, enabling painting work to be carried out in safe and comfortable conditions while minimizing the negative impact on the surroundings and the environment. Specifications: - External dimensions: 7000 × 4000 × 3130 mm - Internal dimensions: 6900 × 3900 × 2700 mm - Entrance door: 3000 × 2600 mm (three-wing design) - Service door: 640 × 1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7 kW - Installation: indoor only Cabin Wall Structure: - Thickness: 50 mm - Insulation: EPS polystyrene - Color: white Cabin Base: - Cabin mounted directly on floor/concrete surface - Installation possible only indoors Double Roof: - Upper external layer: corrugated steel panels - Inner structure: partially grated Air Circulation System (Supply System): - Jet turbine 5.5 kW – 1 unit - Airflow capacity: 20,000 m³/h - Belt-driven system - Air recirculation control: none Iedsxnbf Uepfx Afmeig Lighting (Side Lights): - 20 side-mounted lamps - No option for ceiling lighting Air Heating System: - Single-stage Riello G10 oil burner, 54–120 kW - Manual burner control - Heating time: approx. 20 minutes Cabin Access: - Main Doors: - Dimensions: 3200 × 2600 mm - Three-leaf door system - Service Door: - Equipped with a separate service door - Pressure locks installed Filtration System: - Air intake: Pre-filter - Ceiling filter: Main high-flow filtration Filter Specifications: - Weight: 600 g/m³ - Thickness: 50 mm - Airflow: 900 m³/h - Capture efficiency: 97% - Air velocity: 0.25 m/s - Dust holding capacity: 650 g/m³ - Max temperature: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1

Condition: ready for operation (used), SALES OFFER FOR A COMPACT, ROBOTIZED SANDBLASTING BOOTH KUKA robot configuration: KUKA Robots KR 10 R1420 Configuration/Config.: Basic CYBERTECH NANO version: KR 10 R1420 CYBERTECH NANO A1-A3 cable set: Robot cable set A1-3 KR10 Mechanics color RAL: 260580 KUKA Orange Base color: According to layout/parts list Iisdpfszhrq Usx Afmeg Sign language: See layout/parts list CYBERTECH NANO warning signs: KR CYBERTECH NANO warning signs High-gloss finish: No high-gloss finish Trade fair finish: No trade fair quality Measurement type: Not position-accurate Material number: 10022523 CN/HS Code: 84795000 Robot is lightly used Sandblasting booth: 1800 x 1700 h 2300 The booth frame is made of thick-walled 80/80/3 steel profile. The walls are made of chipboard. The robot is mounted to the ceiling of the booth. A 200 mm diameter dust extraction pipe outlet is located on the outside of the booth. The robot is protected from dust by a cover made of special fabric. The abrasive material is in a closed circuit. The abrasive material is drawn from a hopper located in the lower part of the booth. The side wall has a door. The front wall has a rotating table – while the robot is sandblasting a particular item inside, the operator places the next item to be sandblasted outside the booth. There is no need to open the door to exchange the workpiece. Both the door and the rotating table are automatically locked when the robot is sandblasting. The control cabinet is located separately, away from the booth. The booth can be easily enlarged or adapted for spray painting. Working space: width 1400, height 1200, depth 400. Minimum price: 17,000 EUR net

Condition: used, maximum load weight: 13,320 kg, overall weight: 16,000 kg, first registration: 01/2006, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,525 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2006, Vehicle No. G0124503_1 - Manufacturer: Krone. * Double corner fittings * Roller shutter door (aluminum) * Side walls with keyhole profile * Forklift accessible * Fixed support legs * Lashing points * Partially equipped with keyhole system inside Storage container: weatherproof, secure closure, floor in good condition, no further repairs needed. Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use without further repairs. Undercarriage shows signs of use. Isolated paint chipping on components of the interchangeable body. Isolated minor rust on components of the interchangeable body. Deformations/stops on components - see pictures. Ijdpfx Afez A Rrksmsig Dimensions are approximate. Offer subject to change; intermediate sale reserved. Prices are net, ex works D-59302 Oelde. Further details available upon request by phone or email.

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,800 kg, empty load weight: 2,200 kg, loading space width: 2,530 mm, loading space length: 6,500 mm, loading space height: 240 mm, Dear Sir or Madam, Iisdpfx Ajzwchpjfmsg We are offering brand new roll-off platforms for sale, manufactured in our own production facility. The platform shown in the picture has the following features: - Manufactured according to DIN 30722-1 - Mounting bracket with a diameter of 50 mm - Hook height of 1570 mm - Usable length of the superstructure 6,500 mm - Usable width of the superstructure 2,530 mm (min. 2,420 mm load area between the inserted stanchions) - Front wall height 1,600 mm - Reinforced IPN 180 longitudinal beams - 5 mm diamond-plate flooring - Cross braces spaced approximately 400 mm apart - Sheets and profiles continuously welded - External rollers are lubricated and replaceable - 5 pairs of recessed lashing eyes with a tensile force of 2,500 kg each - Lashing eye rails along the entire side length - 12 pieces of galvanized, solid, separately lockable, insertable stanchions -> Stanchion pockets: 6 on each side and 2 at the rear -> Material thickness 100 x 50 x 6 mm - Warning markings according to §32 (1) StVO & DIN 67520 - Total weight 15,000 kg - Unladen weight approximately 2,300 kg - Payload approximately 12,700 kg - 2-layer primer & coating with Wagner Automotive paint - Painted in RAL 7016 - Includes type plate & container inspection according to DGUV rule 114-010 (formerly BGR 186) - Available immediately - Unit price €5,300.00 plus 19% VAT Delivery throughout Germany is possible for an additional fee! Also available with a 6 m usable length. If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale are subject to change.

Condition: good (used), Year of construction: 1984, operating hours: 2,500 h, functionality: fully functional, volume flow: 4.5 m³/h, type of input current: three-phase, total height: 1,450 mm, overall weight: 110 kg, space requirement width: 800 mm, space requirement length: 1,600 mm, Paint mist extraction system Wiedenfeld Type: WW 455 WK1 Year of construction 1984 in operation until 1992 Triple filtration wet-dry-fine Machine data: Footprint approx. width 1600 mm Iedpfjugu Ufjx Afmsig Depth 800 mm incl. 100 mm wall clearance Height 850 mm + activated charcoal filter 600 mm Return air filter ceiling width 2000 mm Depth 1350 mm Height 220 mm Exhaust air and deflector element for supply / exhaust and mixed air available Control cabinet See pictures for further description and data Accessories: Activated charcoal filter 600 x 600 x 600 mm Filter mats System fully functional Condition used but well maintained

Condition: used, mileage: 114,000 km, power: 350 kW (475.87 HP), first registration: 10/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Mercedes Benz Arocs 2648 / 6x4 / Truck-Mounted Crane / Assembly Crane / Roofer Crane!! Operating hours approx. 1500 hrs. GERMAN VEHICLE, all inspections performed by Mercedes Benz, original paint. Iiedpfx Afoz Dlw Remog CRANE: MKG / HMK 401 HPA 4 L / Rope winch, remote control, 26 m fully hydraulic - 900 KG, plus 2 x mechanical to 31 m - 400 KG. Axle load, front axle: 9.0 t, trailer brake: 2-line, audio-navigation system with Bluetooth comfort features, exhaust pipe downwards on the right, battery 220 Ah, air horn, electrical pre-wiring in the cab 24V / 100 A, suspension: rear leaf springs 2x13.0 t, suspension: front leaf springs 9.0 t, 4 leaves, parking brake additionally on the front axle, storage compartment on the upper rear wall, transmission: 12-speed - type: G 330-12, transmission lock for auxiliary drive, rear lights: construction site version, info display 12.7 cm with video function, fuel tank: 390 L, steel, left, air intake on the side of the cab, engine brake reinforced, auxiliary drive: MB 124-10c, parameterizable special module, spare wheel, pipe rupture protection in the brake system, reversing warning audible (external warning signal), rear cross member reinforced, drawers under the dashboard, seats in the cab: armrest for passenger seat, seats in the cab: driver's seat, comfort suspension seat, sun visor outside, sun protection roller on side windows, driver's and passenger's door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on the front axle), steel rims 9.00x22.5, 12V socket additionally, 24V socket in the passenger footwell additionally, stone guard, carpet on the engine tunnel, door extension for the cab, CB radio preparation, preparation for reversing camera, straight front axle, increased ground clearance, additional thermal insulation, auxiliary heater (water), twin-disc clutch. Emission standard EURO 6, axle configuration: 6x4, trailer socket: 24V / 15-pole, Arocs, exterior mirrors electrically adjustable and heated, differential lock: rear axle, compressed air connection in the cab, compressed air tank: steel, cab: width 2.30 m, cab: mobile cab access, cab: hydraulic tilting mechanism, cab: L StreamSpace, cab variant: StreamSpace, cab: steel-sprung, comfort features, stowage compartment outside left, stowage compartment outside right, lift roof electrically, windshield tinted with band filter, preparation for comfort bunk above, wide, curtain for the sleeping cabin, seats in the cab: driver's seat backrest foldable, suspension: leaf spring / leaf spring, power windows, vehicle without rear window, generator 100 A, urea tank (AdBlue): 60 L, rear axle: bevel gear 233, interior filter: pollen filter, body / superstructure: chassis, comfort bunk below, comfort locking system, steering pump unregulated, air compressor: 2-cylinder, air dryer heated, engine: 12.8 L - 350 kW R6 diesel (OM 471), engine compartment encapsulation, ramp mirrors, waste heat recovery, disc brakes with partial protection, disc brakes on front and rear axles, seat cover / upholstery: fabric, seats in the cab: passenger multi-contour seat, stabilizer: rear axle, stabilizer: front axle, socket in the cab 24V, tachograph / EC control unit, underrun protection rear, fixed, preparation for toll collection, water pump regulated, permissible gross weight 26.0 t, oil cooler, transmission.

Condition: new, Year of construction: 2026, Type designation and technical data The outstanding advantages: Iijdpfob R D U Sox Afmog Space-saving compact design – comfortable and high-performance. Excellent surface quality and pleasant working environment thanks to diagonal, low-turbulence airflow. Large capture area thanks to air guide plates – also suitable for larger workpieces. Separation rate for paint mist up to 99%, retention capacity of the pre-filter up to 18 kg/m² – resulting in a long filter life! Simple and quick filter change on the front side. Cost-effective replacement filters. Low initial costs and extremely low energy consumption. Dry spray booth made of galvanized sheet steel with a welded base frame, cardboard labyrinth filter as a pre-filter, and fiberglass filter as a post-filter unit. Ex-fan including throttle valve mounted on the left side. Do not compromise on the quality of the surface finish. Easy Paint extraction walls are the ideal, cost-effective solution for the effective capture and filtration of paint mist and the extraction of solvent vapors. Robust and high-performance, yet economical in consumption. Standard extraction capacity Easy Paint 3500 Article No. 600025 Airflow rate in standard configuration * 3500 m³/h Primary filter area 2.5 m² Secondary filter area 2.0 m² Motor power 400V/50Hz 1.1 kW Connection for extraction pipe D = 300 mm Width in mm 2750 Overall height in mm 1455 Depth in mm with capture area 855 Weight in kg 145 Location: In stock at Bitburg Exhibition machine available at a special price.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: Ijdpfjwzl Hxjx Afmeig These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: good (used), Weiss Climatic Test Chamber with Seat Pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test Chamber: Material: Stainless steel Dimensions Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Capacity: 1440 liters Outer casing Material: Double-coated Zincor sheet Dimensions Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm HxWxD 2000 x 2200 x 2000 mm Paint finish: Light gray (RAL 9002) Double-leaf door: hinged on the left and right Equipment: Tubing in the floor and ceiling: 2 each, NW 100 mm, for installing the pulsator tables Tubing in the the side walls: 1 each, left and right, 100 mm Cooling unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS Windows Performance data: Temperature range without air conditioning: +20...+100 °C Temperature stability without air conditioning: +0.2 ... t0.5 K (over time) depending on the range, in steady state Temperature range with air conditioning: 20...+95 °C Temperature stability with air conditioning: +0.2 ... +0.5 K (over time) depending on the range, in steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH depending on the range, in steady state Temperature change rate measured in the exhaust without a test specimen and without load - Cooling: 0.5 K/min on average, between +100 and +20 °C ⁃ Heating: 0.5 K/min. On average, between +20 and +100 °C The performance specifications refer to an ambient temperature of max. +25 °C and the specified nominal voltage. For proper operation of the system, the ambient temperature must be between +10 and +35 °C. Seat test device with steel construction for placing and attaching to the climatic test chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for changing test specimens, 12 weights of 5 kg each • 1 base frame in mild steel welded construction for attaching to the underside of the climatic test chamber. This frame is equipped with removable panels on all sides and has two hinged doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric discs with bearings and tachometer, 2 connecting rods, 2 ball bearings, • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for attaching the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for attaching the buttocks simulation • 2 stainless steel 60° load rods (The connection to the test specimen is not included in our price, but can be offered subsequently upon precise specification.) • 2 three-phase motors, 2 belt drives with tensioning devices, • 1 pneumatic control unit with 2 manual valves, a filter-regulator unit, and a shut-off valve. 1 electrical control cabinet with 2 SEW frequency converters, hand switches, emergency stop button, 2 on/off switches, 2 speed indicators, 2 potentiometers for speed adjustment, 2 pre-selected load changers with zero position and shutdown. Technical specifications: Frequency: 100-1000 strokes/minute Load: 2 x 45 g Stroke: 0-40 mm Load from above: 450 N each Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! Ijdpexbgrgjfx Afmsig International shipping costs upon request!

Condition: new, Year of construction: 2025, Paint booth, TM1010 paint wall made of INOX stainless steel. Working dimensions (mm): 1000 (w) x 1000 (h) x 600 (d) Overall dimensions (mm): 1200 (w) x 2200 (h) Technical data: 1,1 kW fan power, Capacity 4500 m³/h, Compression 870 Pa, 3 stage air filtration, 96% filtration degree, Explosion proof Ex fan, Inverter to adjust the fan rotation speed, IP 66 control panel, Hermetic lighting IP 65. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. Iisdpfx Afjd S N Swemog We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 13,100 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,460 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering new 11 m³ containers for sale. The containers have the following features: - Manufactured according to DIN 30722-1 - Lifting bracket with a diameter of 50 mm - Hook height 1570 mm - Internal body length 6,000 mm Iedpszwgavefx Afmoig - Internal body width approx. 2,300 mm (in the flared area 2,460 mm!) - Internal body height 800 mm - Floor made of 5 mm S-235 steel - Side walls made of 4 mm S-235 steel - Sheets and profiles continuously welded - Largely stress-free construction - Floor spar distance approx. 625 mm - Top chord made of S-355 special steel - All-round mesh hooks - External rollers, lubricatable and replaceable - Warning marking according to § 32 (1) StVO & DIN 67520 - Total weight 15,000 kg - Empty weight approx. 1,900 kg - Payload approx. 13,100 kg - Complete epoxy primer coating - 2-component paint in RAL 7016 - 6x 5t lashing eyes in the body floor - Portal doors including central locking & additional locking according to UVV - Including nameplate & container inspection according to DGUV Rule 114-010 (formerly BGR 186) - Unit price: € 5,400.00 plus VAT. Delivery throughout Germany is possible for an extra charge. If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Subject to errors and prior sale.

Condition: used, Type : Stirrer Wall support: manual Previous use: paint Motor power : 0,5 KW Classification: Explosion-proof Stirring unit: Turbine with inclined blades Mixing head diameter: 150 mm Mixing shaft length: 575 mm Iiodpfjx R Aybsx Afmsg Up/down movement: 900 mm

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you. Iisdjxa H Ewjpfx Afmjg

Condition: new, maximum load weight: 45,250 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment details are available upon request. Iisdpfx Afjz Dmn Romog Chassis, gooseneck: Special steel frame made of high-strength fine-grained steels, electrically welded at the connection points, well-dimensioned outer frame. 4-axle arrangement. Wheel arches above the axles with spray mist suppression. All steel parts are sandblasted. Lateral impact protection made of anodized aluminum installed. Increased point load of approximately 30,000 kg over approximately 4,000 mm. Special design in the gooseneck area for maximum low-bed length in combination with AluLeg support legs instead of telescopic support winches, maximum rear swivel radius of the tractor unit approximately 2,100 mm. Special superstructure with rear beam widening: DINKEL – special superstructure. Self-supporting aluminum roof beam/profile approximately 120 x 100 mm, sliding cover with plastic flaps. Rear beams can be widened to approximately 4,200 mm (only for loading and unloading). Three sliding beams per side with rubber strap relief. Additional center beam locking mechanisms in the roof beam and parking position, using a pull cable and spring latch. DINKEL – lifting roof mechanically height-adjustable. Lifting roof height approximately 400 mm, operable on both or one side, without opening the opposite side and the doors. Additional height adjustment of approximately 480 mm in approximately 40 mm increments with height adjustment in the beams. Front overhang on the front wall for operation under a tarpaulin up to a total height of approximately 4,400 mm. Four rows of stackable approximately 150 mm aluminum slats on the sides, with 450 mm pockets at the bottom and 4 rows of single pockets above. In the upper bed, only 3 rows of insertable slats. Spacing between slats evenly distributed. Floor: Approximately 27 mm special water-resistant glued beech plywood, rough surface. Steel sheet in the wheel arch area. Forklift drivable according to DIN standard. Outer frame flush with the surface. Brakes: WABCO air brake system with EBS according to EC standard 71/320 EEC including PREV (parking release safety valve). Spring-loaded brake cylinders as parking brake. Wabco Smart Board with odometer and unit load indicator. Includes WABCO tire pressure monitoring system. Axles: 4 x 10,000 kg SAF/Sauer with drum brakes in low-bed design. Air suspension with lifting and lowering device, total lift approximately 230 mm. Third and fourth axles as friction-jointed trailing axles with electrical and mechanical lock. Twin tires: 235/75 R 17.5, -16-ply. Manufacturer of our choice, including E-wheel holder. Without E-wheel. Lighting: according to EC standard including side lights in LED design. Position lights in LED design. 2 additional reversing lights. 2 work lights on the front wall inside, at the top. Painting: Chassis and superstructure in a single color in the RAL color of your choice. Center beams, axles coated with KTL (cathodic electrodeposition) in black. Corner beams in hot-dip galvanized design. Plastic parts in black. Hot-dip galvanized parts unpainted. Rims in factory silver. Special equipment included: - E-supply cable 15-pin - Air suspension in ECAS design, operated on the semi-trailer - Overwidth signage at the front and rear in zinc-plated, continuously telescopic design with attached boundary lights including so

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 13,100 kg, empty load weight: 1,900 kg, loading space volume: 11 m³, loading space width: 2,460 mm, loading space length: 6,000 mm, loading space height: 800 mm, Dear Sir or Madam, we are offering new 11 m³ containers for sale. The containers have the following features: - Manufactured according to DIN 30722-1 - Lifting bracket with 50 mm diameter - Hook height 1570 mm - Internal body length 6,000 mm - Internal body width approx. 2,300 mm (in the flared area 2,460 mm!) - Internal body height 800 mm - Floor made of 5 mm S-235 steel - Side walls made of 4 mm S-235 steel - Sheets and profiles continuously welded - Mostly stress-free construction - Floor stringer spacing approx. 625 mm - Top chord made of S-355 special steel - All-around net hooks - External rollers are lubricatable and replaceable - Warning marking according to §32 (1) StVO & DIN 67520 - Total weight 15,000 kg - Tare weight approx. 1,900 kg - Payload approx. 13,100 kg - Complete epoxy primer - 2-component paint in RAL 7016 Iodpfx Afozwcf Iomsig - 6 x 5t lashing eyes in the body floor - Ride-over, spring-relieved swing gate - Incl. type plate & container inspection according to DGUV regulation 114-010 (formerly BGR 186) - Unit price: €5,900.00 plus VAT. - Also available in 5.5 m and 6.5 m with short delivery times. Nationwide delivery possible for an extra charge. If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Subject to errors and prior sale.

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 15,000 kg, maximum load weight: 12,000 kg, empty load weight: 2,400 kg, loading space width: 2,500 mm, loading space length: 6,500 mm, loading space height: 125 mm, Dear Sir or Madam, We are offering a new roll-off platform for sale, manufactured in our own production facility. Iiedpfxezhid Ss Afmjg The platform features the following: - Manufactured according to DIN 30722-1 - Mounting bracket, 50mm diameter - Hook height 1570mm - Usable platform length 6,500mm - Tare weight 2,400kg / Payload 12,600kg - 5mm diamond-plate floor / 4mm front wall thickness - Robust hook mount with surrounding plates - IPN 180 longitudinal beams / reinforced - External rollers, lubricatable and replaceable - Primer, painted in RAL 7016 / Anthracite - C-locking mechanism according to DIN - 5 pairs of recessed lashing eyes with a tensile force of 2.5t each - Each side with perforated strips with 30mm holes - 6x robust and lockable inserts for leveling the wheel tracks - Wheel tracks recessed by 120mm - Recessed wheel tracks, each approx. 5500mm long & 708mm wide - 2x lockable steel storage compartments at the front - 2x lashing rings with 5.3t tensile force each on the inside of the front wall / 2x 5.3t lashing rings embedded in the floor at the rear - 2x warning markings according to §32 (1) StVO & DIN - Incl. type plate & container inspection according to DGUV rule 114-010 - Immediately available Also available in 5.5m and 6m usable platform length. Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, we would be delighted to receive your inquiry!

Year of construction: 2005, condition: used, machine/vehicle number: 203/05, Tecno Azzurra paint booth with overpressure water curtain Internal dimensions - Length 7000mm + 2000mm drip grid - Width 5000mm Iisdpfx Afjwfrdxjmog - Height 2700mm Water wall dimensions 5000x2500mm 3 x sliding doors measuring 2000x2300 Air blowing 29,000m3/h Air extraction 22,000m3/h Dismantling on the buyer's side Net price

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 2000-Litre Pressure Tank – English Translation The CORMAK pressure tank with a capacity of 2,000 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing the compressor's operating parameters. Key Advantages of the 2,000 L Pressure Tank Professional pressure-vessel construction – made of high-grade 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 2,000 litres – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multi-connection system – equipped with 5 connections in 2" and 1/2" sizes, allowing flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – the vertical construction helps save valuable space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE marking and the identification number of the UDT notified body, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure-vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Operation Iiodpfx Aezznuvofmeg Thanks to its large 2,000-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of compressed-air-powered equipment and significantly extends the compressor's service life by reducing the number of start-up and shutdown cycles. The vertical design allows for compact installation, which is particularly important in facilities where space is limited. Standard Equipment Connection ports: 5 pcs. – sizes 2" and 1/2" Nameplate with CE marking UDT notified body identification number Complete technical documentation and pressure-vessel passport External anti-corrosion coating Technical Specifications Parameter Specification Weight (kg) 360 Number of connections 5 Connection size 2", 1/2" Dimensions 289 × 101 cm Tank capacity (L) 2,000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 1,010 Height (mm) 2,890

Condition: new, functionality: fully functional, Year of construction: 2026, color: grey-black, overall weight: 16,000 kg, maximum load weight: 13,800 kg, empty load weight: 2,200 kg, loading space volume: 13 m³, loading space width: 2,420 mm, loading space length: 6,500 mm, loading space height: 800 mm, Dear Sir or Madam, We are offering a new 13m3 roll-off container with drop sides for sale. The container has the following features: - Standard: DIN 30722-1 - Lifting height: 1,570 mm - Lifting bracket: 50 mm diameter - Container internal length: 6,500 mm - Container internal width: 2,420 mm - Container internal height: 800 mm - Floor plate: S235 steel (St37-2) with 5 mm floor thickness - Two-part, spring-relieved side walls made of S235 steel with 3 mm side wall thickness - All steels exclusively from Thyssen Krupp - The steel parts are automatically sandblasted before processing to optimize further processing and corrosion resistance - Outer rollers are lubricatable and replaceable - 5 pairs of recessed lashing hooks in a multilock rail with 2,500 kg (positionable as needed) - 2 lashing rings on the front side, each with a tensile strength of 7,000 kg - Swing-out tailgate including spring-relieved access ramp - All posts and side walls can be easily and completely removed if required! - Front wall height: 1,600 mm Ijdpjypb Nwefx Afmsig - Longitudinal beams: IPN 180 - All-round net hooks - Painted in RAL 7016 anthracite - The container is completely primed with a 120mu zinc phosphate primer and then painted with high-quality 2-component paint in a thickness of 80mu - Total weight: 16,000 kg / Empty weight: approx. 2,300 kg / Payload: 13,700 kg - Including nameplate and container inspection according to DGUV rule 114-010 (formerly BGR 186) - Warning marking according to §32 (1) StVO and DIN 67520 - Unit price: €7,800.00 plus VAT - Available immediately Also in stock with other useful internal lengths (4.5m / 5m / 5.5m / 6m) Nationwide delivery possible for an extra charge! If you are interested in other roll-off container products, please do not hesitate to contact us at any time. Errors and prior sale excepted.