Used Pellet Press for sale (28,227)

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 250 P-BP Intake port : 250 mm nominal motor power : 6,5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow : 4.900 m³ / h Nominal volume flow : 3.534 m³ / h Negative pressure 2.451 Pa Filter area 22,4 m² Lrsdpjcdr E Aofx Afgsw Dimensions (L x W x H) in mm 2.305 x 1.333 x 2.609 Briquetting capacity 30 - 50 kg / h Location: Comes to stock 54634 Bitburg Subject to prior sale

Year of construction: 2025, condition: new, Hydraulic C-frame press (punch press) Year of manufacture: 2025 Capacity: 100 tons at 230 bar Control / key switch: 1. Manual setup mode without light sensor 2. Automatic (at full speed) with light sensor Main cylinder: Ø 230 mm Auxiliary cylinders: 2 x Ø 50 x 30 mm Auxiliary guide: 2 x Ø 50 mm Motor: 11 kW – 15 hp Pump: 16 cc – 23 liters / ASC – Helical gear pump Speed: Forward 110 mm/sec – Return 200 mm/sec Pressure phase: 9 mm/sec Ledpfx Aowag Rijfgjrw Installation height: 500 mm Stroke length: 400 mm. Push plate: 750 x 600 mm. – with T-slots Table top: 750 x 600 mm. – with T-slots Table height: 850 mm. (Floor to table top edge) ----- Hydraulic accessories: Hydraulic control block & accessories: REXROTH Pressure adjustment via PLC. (20 – 100 tons) Speed adjustable via PLC. Air cooler Feed valve NG.63 Control accessories: Siemens S7-1200 Blsbjftg Sgsmmvyhwof Main control box Foldable control panel With side safety door (doors can be moved backwards) SICK 750 + 150 mm light sensors. Ruler for adjusting the stroke length 7" PLC screen – Siemens Movable two-hand control Alarm indicator for faults (light & sound) ----- • The press complies with the EN693 Machinery Directive • Hydraulic two-way valves • Dual-channel fused control system • Safety PLC – SICK • Operating instructions & parts list (German) • Warranty: 24 months ----- Oil capacity: 190 liters (Tank volume: 205 liters) Total weight: approx. 5,500 kg. Overall dimensions: 1300 x 2000 x 2750 mm. Delivery time: 2 - 3 weeks from stock. Paint finish: Light gray & dark gray The machine is available immediately in 2 - 3 weeks. Freight: approx. €2,000 from Konya to Germany

Condition: good (used), pressing force: 25 t, – Capacity 25 tons – Table 360 x 350 mm – Foot control – 380V Lrjdpfsxc N Tcsx Afgsw

Condition: excellent (used), Year of construction: 2008, operating hours: 69 h, machine/vehicle number: 740311, Size 52 x 75 cm, Colortronic, Varidamp Alcohol dampening, Semi automatic plate change, Coating unit, IR dryer, Extended delivery Ljdpfxeu E H E No Afgorw

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Autoriv manual workstation A220-PD assembly system is a stationary manual workstation for processing press-fit elements. Intended use: Lodpfjtgik Rox Afgjrw The machine is used to press in fasteners. The worker inserts the corresponding screws, plastic nuts and the component to be and the component to be processed into the machine by hand. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fasteners: Press-in nut, rivet nut, self-piercing nut, press-in stud, punching stud / rivet stud Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connector plug HAN 10, not wired Temperature ranges: Transport: - 20°C to + 60°C Operation: + 10°C to + 40°C Storage: - 20°C to + 50°C Compressed air connection: Operating pressure: 6 bar Quality: Conditioned, water-free and and unlubricated air Connection: 1⁄2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control system: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fasteners are pressed in automatically. Movements are only triggered when the operator presses the foot pedal and triggers the pressing process. Manual mode: In manual mode, adjustments are made to the machine. In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: Used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400V Max. bale weight: up to 550 kg (depending on the material) Lredjxx Slaepfx Afgsw Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 x 65 cm Condition: very good! Function tested. FLITS Rental & Sales service: With every machine, we provide a bundle of baling wire (120 wires). Need more baling wire bundles? Request a free quote without obligation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and individuals. We focus on delivering efficient solutions in internal logistics, cleaning, waste processing, and working at heights. Waste baler, Paper baler, Cardboard baler, Plastic baler, Waste compactor, Recycling, Textile baler, Waste processing.

Year of construction: 2025, condition: as good as new (ex-display), Vacuum - membrane press VP - Series are the optimal solution for woodworking. VP 3000 is equipped with the heating technology, which shortens the drying time of the glue, so that the efficiency is higher. Possible applications: Veneer / form gluing / wrapping... Coating of different profiles (veneer,paper, plastic...) Wood bending: production of bent and layer-glued components The heating system is equipped with temperature control Rubber membrane 2,5 mm Table top is made of plastic 12 mm Oil-free Becker vacuum pump 25 m3/h The control system of the vacuum / tank capacity 15 l working area: 3000x1500mm Heating system temperature: Max. 60 degrees C heating system: KW 4,5 Pump capacity: KW 0,75 Vacuum pump flow rate: 25 m3/h Rubber membrane Ledpfodwh E Aox Afgorw Dimensions outside: 3100 x 1650 x 1600 mm Weight: 450 kg Machine is equipped with a chassis. Location: From warehouse 54634 Bitburg - free on truck -

Condition: good (used), functionality: fully functional, machine/vehicle number: 151/6, Hydraulic Straightening Press Manufacturer: WALTER Type: WP Machine No.: 151/6 The press has a table size of Length Width Thickness 1000 390 60 mm Lredpsxl Tmfjfx Afgjw Cylinder stroke: 400 mm The current distance between cylinder and table is 450 mm. When the table adjustment is set to the lowest notch, the gap between table and cylinder is 850 mm. (See the attached sketch for details) The machine is also equipped with an appropriate control system. Max. Pressing force: 60 tons 180 bar Table height adjustment approx.: 1000 mm (installation dimension) Motor power: 4 kW Two-hand control Emergency stop Foot pedal Stroke limitation via limit switch

Condition: good (used), Hydraulic press, workshop press, two-column press, oil hydraulic press -Hydraulic press: pressing force 102 t -Stroke: 220 mm Lrodoxwucxepfx Afgsw -Operation: Hand lever -Hydraulic unit: VEM 5.5 kW / 325 bar -Clamping table: 1050 x 670 mm -Insertion height: 295 to 1130 mm, lockable in 8 stages via cable pull -Dimensions: 1820/950/H2580 mm -Weight: 2500 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic press brake type PPES 40.135 working width 4100 mm Lrsdpfx Ajxwmutefgjw max press force 135 tons Haco CNC controller type M9101 CNC-controlled Y1, Y2, and X axes crowning with manual adjustment including set of tools

Condition: excellent (used), Here we offer you a TOX press-in machine TOX-C-frame press. TOX Pressotechnik Press-in machine TOX-C-frame press Pneumohydraulic manual workstation with process monitoring for pressing in functional elements. Technical data: Press type EMB 030.068.Α.001 Drive KWE3O.0O.17O.10H Pneumatic connection G3/4'' Compressed air preparation filtered and dried compressed air max. particle size 40 µm Air pressure working process Pmin. = 3,0 bar Рmах. = 6,0 bar Pressing force 170 kN Total stroke / scraper stroke 170 mm/ 10 mm Control STE 326-366-3/4"-90-230٧/АС special cpl. Electrical connection 90-230V/AC Ambient temperature operation Тmiп. = 10°C Tmax. = 60°C Tox press-in monitoring EPW 500FP Force / displacement measurement Holding-up device ZHE for Tox press Insertion dimensions: Width 1917.5 mm Height 2506 mm Depth 1917.5 mm Protective grid circuit Leuze B20/B21 Light curtain Press-in tool see (pictures 15 to 18) Press-in sleeve (Fig. 17) 24.5 ∅ mm Range of application, use Press-fit Weight: 2200 kg Lsdpfxehhil Ts Afgsrw Type: EMB 030.068.A.001 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Year of construction: 2013, Brand: HSM Model: V-press 860 Year of manufacture: 2013 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Filling opening dimensions: 120 cm x 65 cm x 85 cm Condition: very good! Functionality checked. Ljdpfx Afexx Ntbsgerw FLITS Rental & Sales service: with every machine, we supply one bundle of tying wire (120 wires).

Condition: like new (used), Year of construction: 2025, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Lredpfx Afetnz Hbegew Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: used, functionality: fully functional, control type: PLC-controlled, Hydraulic Press Brake EHT CNC Lredpjxu Dyuofx Afgew Manufacturer: EHT Model: EHS 13 - 31 Cutting length: 3100 mm Material thickness: 13 mm Press capacity: 110 tons Backgauge (parallel backstop) Control: Cybelec Upper tool set segmented (also suitable for manufacturing small boxes) Lower tool: Multi V die 4 axes: Y1, Y2, crowning in the table for dimensional accuracy, backgauge Front stops Condition: good used

Condition: good (used), Year of construction: 1986, functionality: fully functional, Pressing force: 1250 kN, stroke rate: 55 min⁻¹, ram adjustment: 75 mm, stroke: 20–120 mm, motor power: 11 kW, voltage: 380 V, machine weight: 8.6 t, throat depth: 340 mm, ram clamping surface: 620 x 300 mm, table clamping surface: 650 x 1000 mm, Ortlinghaus hydraulic clutch with double brake, two-hand control, ram damage has been professionally repaired. Ledpfx Afoxxa Aasgjrw

Condition: new, The 3 T Workshop Press is a versatile Manual Workshop Press that excels in driving in and out arbors, bushings, spindles, and pins, as well as keyway broaching. This compact machine is characterized by its heavy one-piece casting design, offering stability and reliability in various mechanics and repair shop applications. With a press force of 15 kN and a throat depth of 155 mm, it is well-equipped for tasks such as press-fitting and pulling bearings, aligning, and bending. The integrated operator manual ensures ease of use, allowing you to maximize the efficiency of the 3 T Workshop Press. With its robust construction and broad application range, this KNUTH press stands as an essential tool for your workshop needs. To elevate your workshop capabilities, consider ordering the 3 T Workshop Press today. Lredpfx Aeuy Iakjfgow

Condition: used, Thermopatch Type: NL-15-SQR/R The NL-15-SQR/R is a sophisticated combination of advanced technology and a modern, ergonomic design. The device heats up quickly and automatically switches to energy-saving mode when needed. The NL-15-SQR/R operates exclusively with compressed air and is the one-size-fits-all solution for every application. The display is user-friendly. Intended Use: This heat seal press is particularly suitable for industrial applications that require precise temperature control and the ability to use smaller sealing plates (140 x 140 mm). Common applications include applying patches, transfers, or embroidery to textiles. Special Features: Robust and durable: The machine is designed for intensive use and is popular in the textile industry as well as other industries that require high-volume, medium- to high-temperature processing. High flexibility: The temperature range of 25 to 210°C and the adjustable timer from 1 to 240 seconds offer flexibility for a wide variety of materials and applications. Efficient: Lrjdpjwif Rgsfx Afgow The air pressure range of 3 to 6 bar and the air consumption of 3.01 liters per cycle make the machine efficient in operation. The Thermopatch NL-15-SQR/R is an industrial heat seal press with the following technical specifications: Technical Data: Power supply: 240 V Maximum power: 800 W Temperature range: 25 – 210 °C Timer: 1 – 240 seconds Dimensions (H x W x D): 470 x 540 x 470 mm Sealing plate (mm): 140 x 140 mm Noise level: < 70 dB Air pressure range: 3 – 6 bar Air consumption per cycle at 5 bar: 3.01 l Weight: 59 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Press Brake AMADA Brand Type HFT 80/25 Lrsdpfx Aswivddofgew Capacity 2500 x 80T Distance between uprights 1800mm Dimensions 3500 x 1500 x 2100 Weight 6.5T Equipped with new and used tools

Year of construction: 1985, condition: excellent (used), Edge gluing press for veneer, solid wood and plastic, model HFK 2200, for trimming edges during press time. Lredpfxow Apqqe Afgew When using heat-curing glue, we achieve pressing times of 20 to 30 seconds for veneer edges. Maximum working size approx.: 1,400 x 2,500 mm Heating: 1.7 kW Electro-pneumatic edge press Haug HFK 2200 for pressing edging material onto wood, with heating. 3 table extensions Swiveling work table Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50 /92-NG 600/15 kW/32Liter, pressing force: 130 t, operating speed: 80 mm/s, overall weight: 3,500 kg, Hydraulic straightening press Manufacturer: G +K Year of manufacture: 1992 Max. pressing force: 130 t Lower table size: 800 x 500 mm with T-slots Upper table size: 800 x 500 mm with T-slots Installation dimension: 1000 mm System pressure: 250 bar Electric motor: 15 kW Ljdpfxexr Rnaj Afgsrw Weight: 3400 kg Operating voltage: 380 V AC, 24 V DC

Condition: new, Hohner stitching heads 52/8S Lrodpexwx A Asfx Afgjw condition as shown in the photo

Condition: excellent (used), Ifsys Type: 114100 Type: VL 13 Servo press Bunker system with 2X Vibroliner and 2X Vibrobunker 1X return belt 2X control unit FC 1000 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) Lrsdpjhh Ibdsfx Afgew We will be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2024, functionality: fully functional, TRtech Prime 31100 Press Brake 1 EUR 52,500.00 EUR 52,500.00 Bending Force: 100 ton Bending Length: 3100 mm Distance Between Columns: 2600 mm Stroke: 265 mm Daylight: 490 mm Throat Depth: 410 mm Table Height: 900 Table Width: 110 mm Free Fall Speed: 120 mm/s Pressing Speed: 10 mm/s Return Dpeed: 110 mm/s X Axis Stroke: 750 mm Engine Power: 11 kW Width: 1780 mm Height: 3960 mm Lrsdpfxevd Aavs Afgsw Length: 2850 mm App. Weight: 8500 kg Number of Axis: X, R, Z1, Z2, Y1, Y2 Safety Cages with Switch CNC Controlled Hydraulic Dynamic Crowning System Control Unit: STEP Rock 22 Servo Motor Backgauge: X, R, Z1, Z2 Segmented Die Segmented Punch Sliding Front Arms ( T-Slot and stopper ): 2 pieces Payment conditions: BY SWIFT: %40 pre-payment in advance, rest before loading TOTAL EUR 52.500,00 Delivery time: EX-Works OSM Makina, 12 weeks after the reception of order SEAL AND SIGNATURE PROFORMA INVOICE Bill To Frank Pelka Maschinen GmbH Dorfstr. 11 57271 Hilchenbach Germany

Condition: new, Hohner stitching heads Ljdpfsxwxyzox Afgorw condition as shown in the photo

Condition: used, Schmidt Laboratory Press MB 10 300 Item description: For sale is a high-quality Schmidt MB 10 300 laboratory press. The machine is in ready-to-operate condition and has been well maintained at all times. Ideal for laboratory applications, research, and precise pressing operations. Technical highlights: - Press force: max. 100 kN - Retraction force: approx. 43 kN - Operating pressure: approx. 200 bar - Piston diameter: 80 mm, piston rod diameter: 60 mm - Stroke: 300 mm - Heating platens: 300 x 300 mm, electrically heated up to 200°C - Heating power per platen: 3 kW - Closing speed: 23 mm/s, opening speed: 0–25 mm/s manual / 60 mm/s automatic - Hydraulics: Internal gear pump with 63 l/min, drive power 3 kW - Electrical connection: 3 x 400 V, 50 Hz - Control voltage: 24 V Special features: - 4-column vacuum design for stable guidance Lrodpfx Aexg Hybsfgsw - High-quality, precision-ground parallel heating platens - Separately controllable electronic temperature regulation with ±2 K accuracy (PT100) - SIEMENS PLC control system with two-hand safety operation - Automatic operation with programmable pressing and heating cycle - Adjustable press stroke with upper and lower limits - Clearly arranged control panel for easy operation - Robust, durable construction with integrated thermal insulation Dimensions and weight: - Width: 1140 mm - Height with safety door open: 1935 mm - Depth: 1350 mm - Operating height: 1110 mm - Weight: 920 kg Color scheme: - Machine frame: slate grey RAL 7015 - Control cabinet & safety enclosure: red RAL 2002 - Functional components: galvanized Condition: used Scope of delivery: (see image) - Schmidt MB 10 300 laboratory press - Integrated PLC control with operator device - Hydraulic unit and all function-related connections (Changes and errors in technical data reserved!) We will be glad to answer further questions by phone.