Used Pellet for sale (274)

Condition: like new (used), Year of construction: 2022, functionality: fully functional, We are selling a converted overseas shipping container equipped with a Herz Firematic 130 boiler system. The heating unit has a capacity of 130 kW and is connected to a Lauber heat exchanger. Additional doors have been installed in the heating container to facilitate maintenance and inspection, ensuring easy access to the system. The boiler is fired with wood pellets, and the integrated pellet bunker holds approximately 1.5 tons. Both the heating container and the Lauber unit must be dismantled prior to transport, but thanks to the container design, they can be easily loaded for relocation. The interior of the heating container is lined and treated with a special coating to prevent condensation drip formation inside. The Lauber unit installed is a Lauber Energy Utilization Center type L-ENZ 80+ (5.50 kW fan). Both machines are in nearly new condition with only minimal operational use. The total operating hours are currently 3,577, which equates to approximately 149 days of operation. Both units were manufactured at the end of 2022 and have been in use since around May 2023. What is this system suited for? It can be used for heating halls, buildings, construction sites, etc., as well as for drying bulk or natural materials such as wood, wood chips, horse manure, or any free-flowing bulk goods. Hedoybbphepfx Aadsnh Please note: The drying boxes shown in some of the photos were part of our operational setup but are not included in this offer. For further details on dimensions, weight, and loading, please refer to the attached technical drawings.

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Hnedpfevzub Hex Aadeh Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Year of construction: 2017, condition: reconditioned (used), 2 x Entrade 199kw systems are available to purchase, each approximately 145kw of heat, and 50kw of electric Two boilers available fully reconditioned. These do NOT include engines Ideal for reducing high energy costs. Both systems available to run on woodchip or wood pellets Hsdpfxjp Ayqis Aadenh

Year of construction: 2002, condition: excellent (used), functionality: fully functional, Twin-screw extruder Ref. No.: DE27695 Manufacturer: Leistritz Type: ZSE 40 HP Year of manufacture: 2002 Screw diameter: 2 x Ø 40.0 mm L/D: 40D Hedpfx Asx Dip Toadonh Drive: 70 kW Details: co-rotating, segmented screws and barrel, 1 x segment for side feeding Options: pelletizing, dosing, side feeder Does this offer not meet your requirements? Please visit our website Plama Engineering or send us your detailed inquiry, we have suitable solutions for almost every budget.

Condition: used, functionality: fully functional, Year of construction: 2017, 1x Mixer Holding Tank / Storage Container - Custom-made from V4A stainless steel - Used in our pellet production line as a buffer tank for herbal mixtures in powder form. It features a feed line (right side) from the mixer and a discharge on the left side to the intermediate storage tank. At the inlet from the mixer, there is also an option to divert the mixture into big bags prior to storage. Hjdpfx Aoxtmxwoadjnh - Material feed via electric auger (top) - Material discharge via electric auger (angled) Filling capacity naturally varies depending on the type and volume of the mixture. With our mixtures, it held approximately 2 x 400 kg. All motors and sensors are fully functional.

Condition: excellent (used), Suitable for filling a massive variety of products, for example; fertilizer pellets, toner powder, cat litter, granulated or powdered pet food, whole and ground coffee, sugar, plant food, powdered foods, plastic granules, ground spices, flaked spices, fine cut tobacco, whole and ground pepper, detergent powder, flour, infant formula, cake mix, matcha powder, cosmetic powder, curry powder, seeds, salt products, rice products, lentils, breadcrumbs etc. Hedpfx Ajw H Adrjadenh

Condition: refurbished (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 355, total width: 1,100 mm, total height: 1,000 mm, total length: 2,800 mm, briquette diameter: 60 mm, overall weight: 2,400 kg, warranty duration: 3 months, control cabinet width: 1,000 mm, control cabinet length: 1,000 mm, control cabinet height: 300 mm, type of input current: three-phase, The subject of the auction is a BT-60 briquetting press designed for processing sawdust, straw, and other materials. - Briquette output: 500 to 750 kg/h, briquette diameter: 60 mm. Other dimensions (depending on the production set used) - Briquette diameters: 36-40 mm, 46-50 mm, 56-60 mm - Briquette shapes: Cube 48x48 - 55x55 - 59x59 mm. Hedpev Scxzefx Aadsnh - Warranty: 3 months from the manufacturer. Wektor is a manufacturer of equipment for briquette and pellet production. We have been manufacturing briquetting machines for over 30 years.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Hnedpfx Aswigbmeadoh Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: ready for operation (used), functionality: fully functional, A good used vacuum transfer system from CFM with lance hose and discharge station in Stainless Steel - requires three phase power and compressed air - ideal for handling powders granules or pellets More videos and pictures available - just ask Ready to ship worldwide Hnsdowv Tzgjpfx Aadjh We will handle shipping and export documentation

Year of construction: 2025, condition: new, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h Hsdpfxjghmp Ns Aadonh We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Brsgistoyp Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Year of construction: 2026, condition: new, Screening machine | Oscillating screen type ASM-550 Demonstration machine - Make: S&F GmbH - Type: ASM-550 - Screening capacity: approx. 60 - 70 m³/h (for wood chips and sawdust) - Screening area: 5.4 m² - Fractions: 3 or 4 pieces - Screen decks: 3 pieces - Drive power: 4.0 kW - Machine weight: approx. 3,800 kg - Machine colour: RAL 6011 Reseda green - Screen inserts and material outlet freely selectable Hnjdpfxoxtfv Ie Aadjh Suitable for screening the following bulk materials, among others: - Wood chips and wood shavings - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screen machine | Flat screen | Vibrating screen | Roll sifter | Screening machine for wood chips

Condition: refurbished (used), functionality: fully functional, Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt Factory-refurbished and inspected (used) with new rubber steep-incline conveyor belt and new carrying rollers Lightweight frame construction made of steel Belt width: 500 mm Hjdpfx Aasxz Tg Dsdjnh Axle distance (A-A): 10,000 mm Conveying capacity: approx. 30–40 m³/h (at 0° incline) Drive: Drum motor, used Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tension drum: Drum diameter 160 mm with spindle tensioning station Belt: Rubber steep-incline conveyor belt EP 250/2 2:1 with V-profile (15 mm) Machine weight: approx. 800 kg Machine color: freshly repainted Incl. infeed hopper (charging hopper) Suitable for, amongst others, the following bulk materials: Wood chips, sawdust and wood shavings, biomass, wood pellets, charcoal, waste wood, bark, earth, compost, recycling material, trimmings, and much more. Accessories (optional): Internal belt scraper, chassis, tow bar, steel support, electrical installation (plug switch 16 A) Trough Conveyor Belt | Trough Belt Conveyor | Conveyor Belt | Bulk Material Conveyor | Belt Conveyor | Inclined Belt Conveyor

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Hsdpjw Ad Rrofx Aadsnh Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/8 Belt width: 500 mm Centre distance (A-A): 8,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: Drum Motor Motor power: 2.2 kW, 400 V, 50 Hz Hjdsxk Tg Njpfx Aadonh Belt speed: approx. 1.25 m/s Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 800 kg Machine colour: RAL 6011 reseda green Suitable for the following bulk materials, among others: Potatoes, Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Hjdpfx Asw Spntjadenh Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Fractions: 3 Mesh size of the screen: - 1st screen deck: punched perforated plate screen, D = 45 mm or as agreed - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Height of screen box: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Hnjdpfx Ajin Ey Sjadjh Please contact us! We will be happy to advise you.

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Screen area: 6.0 m² per screen mesh size Screen decks: 2 pieces Fractions: 3 Mesh size of the screen: - 1st screen deck: punched perforated plate screen, D = 43 mm, deep-drawn - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Height of screen box: 820 mm L x W x H: 4,000 x 2,200 x 1,550 mm Machine weight: approx. 5,500 kg Hedpfoxq Rt Tex Aadsnh Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: refurbished (used), Bezner screening machine | roller screen type TWD reconditioned | refurbished with new bearings (roller bearings), new ball plates and reconditioned screen box Make: Bezner Type: TWD Screening capacity: up to approx. 60 - 80 srm/h (for wood chips and sawdust) Fractions: 3 Screen area: 6.0 m² per screen mesh size Screen decks: 3 pieces Fractions: 4 Mesh size of the screen: - 1. screen deck: punched perforated plate screen, D = 50 mm or as agreed - 2. screen deck: punched perforated plate screen, D = 30 mm or as agreed - 3. screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 5.5 kW, 3 x 400 V, 50 Hz Height of screen box: 930 mm L x W x H: 4,000 x 2,200 x 1,700 mm Machine weight: approx. 5,500 kg Hnjdew Sylpepfx Aadjh Machine color: RAL 6011 Reseda green Screen inserts freely selectable Design of outlets according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) Hnsdpoq Iivasfx Aadsh - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips

Condition: excellent (used), functionality: fully functional, used deck oven system, with 1 deck oven Wachtel Columbus E 920/324 TCOMFORT, 9 decks, 180 cm wide, 200 cm deep (with touch control and gas burner), with 3 wood deck ovens Crosta 3.18.20, each 3 decks (with pellets), with 1 loading and unloading system Wachtel Comfort Lader (with Wachtel WinServer), year of manufacture 2016, in bakery condition, for self-dismantling, worked flawlessly until the closure of the bakery Hnsdpfx Ajx E Df Ioadjh

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 540 kg, smoke pipe connection diameter: 160 mm, temperature: 90 °C, total height: 1,420 mm, total length: 1,240 mm, total width: 1,445 mm, warranty duration: 60 months, Equipment: hot water, Central Heating Boiler Uniwersal Power 24kW Hybrid boiler for pellet, wood, and eco-pea coal! Heating Surface: 10kW = 50 – 90 m2 12kW = 80 – 110 m2 15kW = 90 – 140 m2 19kW = 140 – 180 m2 24kW = 140 – 220 m2 Our 5th class pellet, wood, and eco-pea coal boiler is a unique product that comes with an ECODESIGN Certificate. The Uniwersal Power boiler is a modern yet straightforward design. Unique construction on the market: – Boiler made of 6mm thick boiler steel! – ECODESIGN Certificate – SV2000 side combustion step burner – Large loading hopper, providing up to 7 days of continuous operation! – ARGOS PID PLUS PELLET controller – Auger reverse run – Horizontal channels without troublesome and short-lived ceramic plates – Supports 3 pumps – High boiler efficiency – Wide controller expansion options – Can operate continuously throughout the entire heating season without the need to shut down – Low fuel consumption in summer mode – Long boiler lifespan Uniwersal Power 24kW The boiler complies with the new 5th class, effective from July 1, 2018, PN-EN 303-5:2021-09 and the newly established 2020 ECODESIGN standards for pellet and eco-pea coal! Easy cleaning! ARGOS PID PLUS PELLET Controller! Hnjdpsx Up Dzofx Aadjh Argos PID Plus PELLET is a controller designed for boilers with automatic fuel feeders. In addition to managing the combustion process (control of the screw feeder and air supply), it also controls: – Central heating circuit (time zones, option to connect a room panel) – Domestic hot water circuit (boiler charging pump, time zones) – Additional 230V output (e.g., circulation pump or additional heating circuit) – Mixing valve (time zones) PID Algorithm SV2000 Feeder The feeder is an integral part of the central heating boiler with automatic fuel dosing. Fuel is delivered from the storage bin (hopper) to the burner by an auger. Combustion takes place in a specialized, patented fifth-generation combustion chamber. Driving the auger is a gearmotor consisting of a motor and gearbox. The burner ignites and shuts down automatically! Main tasks of the SV2000 burner: – Fuel combustion – Regulation of combustion intensity – Automatic fuel feeding – Safety – Energy efficiency Equipped with a step-type feeder: – No need for an additional pellet insert; the step feeding system ensures fuel separation and safety. – Shutdown procedure ejects and burns all pellets from the lower feeder – Improved air distribution allows faster ignition – Use of two energy-saving gearmotors and a robust feeding system increases reliability; the previous pellet capacity sensor has been eliminated – New combustion chamber shape guarantees increased lifespan of SV2000 feeder components We always purchase parts for our boilers directly from the manufacturer, ensuring we have access to the latest solutions and improvements, positively impacting boiler performance and reliable, trouble-free operation. WHAT IS INCLUDED IN THE COMPLETE BOILER PACKAGE? 1. GZ 1.5″ return stub pipe 2. GZ 1.5″ supply stub pipe 3. Drying and pressure equalization system for the hopper 4. Slot for controller sensor 5. Socket, GW 3/4″ (for e.g., thermometer) 6. Hopper 7. Drive – Gearmotor 8. Socket for faucet GW 3/4″ 9. ARGOS PID PLUS PELLET controller 10. Chimney fitting selected and matched to the customer!

Condition: used, ALREADY DISASSEMBLED ‼️ READY TO TRANSPORT ‼️ Fröling Turbomatic (TMC) wood chip boilers for sale – 35 / 48 / 55 / 110 kW outputs! Quality, automated Fröling TMC series biomass boilers for sale, with different outputs. An ideal choice for families from single-family homes to small industrial facilities, where reliable, economical heating is important. ⸻ Available types: • Fröling TMC 35 kW – for smaller systems • Fröling TMC 48 kW – for medium heat demand • Fröling TMC 55 kW – larger workshop, farm • Fröling TMC 110 kW – for industrial/agricultural systems ⸻ Features: 🌲 Fuel: wood chips, pellets, shavings 🔁 Automatic operation: dosing, cleaning, ash removal Hedpfxewakkte Aadsnh 🧠 Advanced combustion control, intelligent control ♻️ High efficiency, low emissions 🇦🇹 Fröling – Austrian premium biomass technology Prices vary by type – inquire by phone or email! 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Wide selection of used Froling boilers, with expert support.

Condition: used, functionality: fully functional, total length: 1,300 mm, total width: 700 mm, total height: 1,500 mm, overall weight: 160 kg, The GEA UM600 dumpling roller is an essential solution for food manufacturers wishing to guarantee uniform, standardized dumpling production. Designed to handle a wide range of products including meat, fish and poultry, as well as vegetarian options such as falafel and potatoes, this machine ensures exceptional consistency. Thanks to its stainless steel structure, it combines robustness and hygiene, two essential elements in production environments. What's more, the GEA UM600 stands out for its mobility, offering greater flexibility on the production line. It is also compatible with equipment such as the VM 400 corrugator, enabling seamless integration into different configurations. What's more, its ability to form pellets from 6 to 80 grams, combined with adjustable speed, meets a wide variety of production needs. All in all, this machine is a major asset for any company wishing to optimize the quality and consistency of its products. All stainless steel Meatball rolling machine Width 600 mm For forming meatballs from 6 to ± 80 g Suitable for in-line forming (VM 400) Adjustable speed Hnedpfou E R Emjx Aadeh Mobile Dimensions (L x W x H): ± 1,300 x 700 x 1,500 mm.

Condition: used, Year of construction: 2018, functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Brand wood pellet boilers: KWB Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Power range: 40 - 675 kW Year of construction: 2018 Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other Hjdpfev Uz Efjx Aadjnh The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: new, PROTON P-V LINE  PROTON equipment offers the right solution to recovering and conveying of blast medias, powders, plastic pellets, grains, sands, aggregates and other bulk metarials in both cleanup and material transfer functions. The main type of industry using our equipments are blast cleaning companies, shipyards, tank cleaning companies, metallurgical plants and steel mills, foundries, power plants, cement industries, chemical industries etc..   Hnjdpfx Aajghbkyedoh The dust in the air is collected by a Vacuum Cleaner and the grit in the Stock Silo by its separator. Especially in inaccessable or enclosed areas such as storage tanks, box girder constructions, tank internals at shipyards etc., the equipment offers great savings in time and manpower.  A PROTON Vacuum system cuts costs by reducing cleanup time and reclaiming valuable materials.  This versatile vacuum system can be used to pick up any material that will flow through a hose.  With its long reach and powerful suction, PROTON cleans out tanks, pipes. There are 2 types of stock silos, Cylindrical and Square, having 2 floors. Technical Specifications for standard machines: VC Unit’s cost-cutting power has been proven hundreds of times. In fact, most VC units pay for themselves in less than 3 months through reduced labour costs and reclaimed materials. Units are available with capacities up to twelve tons per hour, conveying distances up to 330’’(100m),and motors with 7,5 kW-90 kW (3,98m³/min-72m³/min). Performance data for air (p₁=1,0 bar, t₁=20 °C, ρ=1,2 kg/m³) The heart of the PROTON VC is a very robust AERZEN blower made in GERMANY. All sets include the following equipment: - Suction Hose (rubber-wired) - Suction Hose for connection between Vacuum Unit and Hopper - Suction Nozzle - Cam-lock and clamp Connections - Cartridge Filter (spare) - Oil for Blower (spare) - Manometer (spare) - Phase Protection Relay - all necessary fasteners