Used Pet Bottles for sale (1,528)

Year of construction: 2001, condition: used, New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call! Additional title: Depalletiser with lifting frame Capacity: 140 layer/h Power: 8,75 kW Voltage: 230/400 Volt Frequency: 50 Hz Compressed air: 5,0 bar; 8,0 Nm³/h Length: 4020 mm Width: 3400 mm Height: 5425 mm Weight: 3800 kg Formats: europalett (1200 x 800 x 140 mm) Operation / Control: control box / Siemens S7 Hodpfxox T Ai Ij Am Tsr Material: Painted mild steel Position: free standing Base construction: Square tube frame Features: Pallet infeed, -outfeed, -magazine; base frame with lift truck, shaft walls, layer pad gripper, clearing table, linear unit, push flap, centring, push-off plate, cardboard lifter, magazine, slip lid magazine, stairs/platforms, protective grille, control system Periphery: Bottle conveyor belts approx. 20 m, pneumatic transport approx. 50 m

Condition: used, Year of construction: 1996, Bottle filling line with an output of 30,000 bottles/h. 0.33l Vichy 0.33 Ale and 0.5l NRW single-use and reusable bottles are used. The system consists of the following machines/components: -Depalletizing system Manufacturer: Kettner -New glass remover Manufacturer: Kettner -Empty container control Manufacturer: Heuft -Uncorker/unscrewer Manufacturer: Rink -Unpacker Manufacturer: Kettner -Bottle washing machine Manufacturer: KHS -Crate washer Model: KWZ-20 - No.115 -Empty bottle inspector Manufacturer: Heuft -Bottle filler Manufacturer: KHS -2 closure feeders Manufacturer: Gassner -Bottle level control Manufacturer: Heuft -Labeler Manufacturer: Krones -Label control Manufacturer: Heuft -Packer Manufacturer: Kettner -Palletizing system Manufacturer: Kettner -Pallet binder Manufacturer: Born -Pallet film wrapper: Manufacturer: Robopac -Pallet labeling Manufacturer: Weber Marking Systems Additional title: Returnable glass bottle filling line Capacity: 30000 bottles/h Hsdpfxsvu Tthe Am Tsr Formats: 0,33 L Vichy, 0,33 L Ale and 0,5 L NRW Features: Depalletizer; new glass remover; empty container inspection; uncorker/unscrewer; unpacker; bottle washing machine; crate washer; empty bottle inspector; bottle filler; 2 closure feeders; bottle level control; labeler; label inspection; packer; palletizer; pallet binder; pallet film wrapper; pallet labeling

Year of construction: 2026, condition: used, functionality: fully functional, Complete brewery equipment, can and bottle filling machine, pasteurizer, manual depalletizer, can rinser and turner. The equipment is located in the Faroe Islands. Hsdjy Atr Sepfx Am Tjr

Condition: used, Year of construction: 2010, Manufacturer : Serac Model : DMX R6V3/720 Year : 2010 Type: Monoblock filling and screwing   Current application: 250 mL bottle/vial - Ø38 mm screw cap Output: 3,300 bottles/hour Dosing: by weight Suction conveyor feed system ensuring bottle stability Heraeus UV tunnel: decontamination Feeding of caps via hopper and bucket conveyor and distributor Decontamination of bottle caps using Claranor pulsed light   Filling: 100L capacity hopper Hodpfxsyr Sxne Am Tjr 6 nozzles on scales connected to the ejection of bottles at the machine outlet   Screwing: Tightening of caps using pneumatic jaws Adjustable clamping pressure

Condition: used, Year of construction: 1995, Overview The bottle washer "Sirio 7" from the German manufacturer MAG was built in 1995. Maintenance was carried out regularly by MAG. The machine can be inspected and tested in person. Technical details  Capacity up to 7,000 bph Bottle cells for 1.0 liter bottles (smaller bottles can also be used, but additional insertion plates are required) Diameter of bottles: 78 - 90 mm Bottle height: 288 - 310 mm Bottle cells per row: 10 Dimensions (LxWxH): 7,880 mm x 3,045 mm x 3,325 mm Empty weight: 14,300 kg Full load weight: 25,600 kg Installed power: 20.85 kW Heating system: Steam 3 bar Hjdetrbrqopfx Am Tor

Condition: used, Year of construction: 2021, Overview  The bottle unscrambler was manufactured in 2021 by the German company ALWID. It is part of a new filling line and can fill chemical products into plastic containers. The machine has ATEX certification, which allows it to handle explosive products. The machine can be purchased with warranty.  Technical data  Capacity  12.000 bph at 50 ml HDPE, oval 43 x 23 x 95 mm  14.000 bph at 250 ml HDPE, Ø60 mm x 126 mm Incl. 2 format sets for processing the above mentioned bottle sizes. Bottle sizes Fully enclosed cabin, machine frame and wall panels in stainless steel Floor frame in mild steel, painted (similar to RAL 9006 silver gray) Quick access due to large doors as well as quickly removable panels Rejection of defective bottles  Easy format changeover due to quick-change system without tools Siemens S7 control system  Bottle loading system with hopper 1000 l, in stainless steel, chassis and supports in mild steel, painted Positronic control system for optimum adaptation to downstream filler Hodpfomk I Dwjx Am Ter

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Hodpfjl Hx Rpsx Am Ter

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Hedpfx Aju H R Nnom Tor

Condition: used, Year of construction: 1993, Overview The GM Gera NAGEMA Arcade DS bottle washer was previously used in a brewery. There it was operated in single-shift operation. Since the sales volume has decreased, the beer of the brewery is now bottled at another location and this bottling line has become available. Due to the low number of operating hours and regular maintenance, the machine is in a very good condition. All basins and the machine body are made of stainless steel. Spare parts, such as bottle cells, are also still available. Furthermore, the main drive shaft, as well as the motor and gearbox were overhauled by SEW in 2018 and the carrier chain was replaced in 2015. The machine is still mounted and can also be demonstrated. Tech Specs: Capacity: 23,000 bph Cell pitch: 85 Bottles per row: 16 Dimensions + weights with attachments: 8640 x 4470 x 1920 mm / 17,900 kg Details: Standard drives Heating with steam Operating side left CE certified Chemistry dosing pumps Machine data sheet Fixed pipe spraying controlled by machine cycle Single-end machine Label discharge rear right Finger discharge + finger feeding Bottle discharge left Bottle cells plastic HMI Lauer Lye concentration measurement 24 Volt control voltage Control S5 (on request conversion to S7) Regularly maintained Water part in VA Fume extraction Sampling taps KSB pumps in VA Plug-in strainers for baths Water meter Conductivity measurement from Endress Additional Equipment: Spare parts included   Hjdpfel Hx Adsx Am Tjr

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Hjdpjt Ul Exsfx Am Tor

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Hsdpfx Ael Hx Enjm Tsr

Condition: good (used), Year of construction: 2002, Seal cutter for glass bottles Hodpfx Amsvtruze Ter Threaded clevis Slightly used

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 336.067, 3-head glass bottle capping machine Hjdpfx Amow R Tvxj Ter

Condition: new, Year of construction: 2005, functionality: fully functional, Machine slides for washing jars and bottles the machine is new, never used Hodpfx Amjvtf R Nj Tsr

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, product height (max.): 380 mm, workpiece diameter (max.): 130 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Capacity with standard bottles: up to 7,200 bph Product formats Bottle volume: 0.25 – 3.0 L Max. bottle height: 380 mm Max. bottle diameter: 130 mm Preform dimensions Max. preform length: 210 mm Neck inner diameter: 34 mm MACHINE DETAILS Dimensions & Weight Blow module dimensions: 2,000 x 2,200 x 2,200 mm Blow module weight: 8,000 kg Oven dimensions: 3,000 x 1,100 x 2,100 mm Hedpex A Uu Eofx Am Tjr Oven weight: 2,000 kg Control cabinet dimensions: 1,500 x 1,000 x 2,100 mm Control cabinet weight: 1,000 kg Transformer 415V / 380V dimensions: 1,000 x 500 x 2,000 mm Transformer weight: 500 kg Preform hopper and conveyor dimensions: 3,000 x 1,500 x 3,500 mm Preform hopper and conveyor weight: 600 kg Preform feeder dimensions: 2,000 x 2,500 mm Preform feeder weight: 250 kg Infeed guide rail length: 2,000 mm Power supply Total power: 142 kW Mains connection: 380/420 V +/- 10%, 50 Hz +/- 1% Cooling water Cooling capacity: 16,000 kcal/h Water temperature: 10 – 12°C Flow rate: up to 6.0 m³/h Water pressure: 5 – 6 bar Compressed air Service air pressure: 7 bar Service air flow: 50 – 100 Nm³/h Blowing air pressure: up to 35 bar Blowing air flow for 0.25 – 3.0 L: 155 – 770 Nm³/h EQUIPMENT Transformer 415V / 380V Preform hopper and conveyor Preform feeder Infeed guides Adaptation to other voltages possible

Condition: used, Year of construction: 2010, operating hours: 47,000 h, machine/vehicle number: LC582, Used Complete Krones PET Bottling Line – 22,000 BPH – OverviewUsed Complete Krones PET Bottling Line – 22,000 BPH – Overview This second hand, ultra-clean Krones PET bottling line is a complete, high-efficiency solution for beverage production and industrial packaging across cider, sparkling water, still water and CO2-mixed juices. Built by Krones and GEA in 2010 and kept in production with OEM service, the line delivers up to 22,000 bottles per hour (0.5 L) and 18,000 bph (1.5 L), combining a Contiform S12M blow molder directly coupled to an ultra-clean isobaric filler-capper bloc. It is a market-ready used bottling line designed for reliability, hygiene, and quick format changeovers in PET.Technical Specifications & Performance DataManufacturer: Krones and GEAYear of manufacture: 2010Working hours: approx. 47,000Nominal capacity: 22,000 bph (0.5 L) | 18,000 bph (1.5 L)Products handled: cider, sparkling water, still water, juices with CO2Filling technology: Ultra-clean, isobaric, volumetric PET fillingCurrent product: Apple juice with water and CO2Neck finishes: PCO 1810, PSO 28 mm, 1810/1881 short neckControls: Siemens Simatic S7 PLC platformMain Equipment ScopeCIP: Krones VarioClean F AUT fully automatic CIP system, 4 x 5000 L, 30 m³/hProcess: GEA TDS plant with flash pasteurizer, mixer, carbonator, degasser and process tanksPreforms: Preform tipper/kipper and feeding conveyors; Krones Contifeed RS preform feeding system; Prejet Linear preform cleaning unitCaps: Cassner cap feeding with cap rinsing and sterilizationBlow molder: Krones Contiform S12M, directly connected to the ultra-clean bloc (no air conveyor)Filler/Capper bloc: Krones Volumetric VODM-PET 2.160-66-103 with integrated capper; Krones Vario Dos filler-bloc cleaningCoding and inspection: Domino DDC 3 laser coder; Krones Checkmat 731 FM-X+L filling level inspector; Krones Checkmat 731 EM label inspectorConveying and testing: SYNCO bottle conveyors; Krones Flowliner bottle leak testerLabeller: Krones Contiroll OPP 720-15, double roll-feed wrap-around labels with hot glueSecondary packaging: Krones VarioPro FS shrink–tray packer; Krones Multico S packet conveyors; Twin Pack handle applicatorPack coding: Leisinger Jet 3 ink coderPalletizing: Krones Robopox Modulpal (2016)Advanced Automation & Control Systems Line Control & PLCSiemens Simatic S7-series PLC for coordinated line control, interlocks and diagnosticsIntegrated filler-bloc cleaning via Krones Vario Dos for validated ultra-clean cyclesRecipe and parameter management supporting fast changeovers between PET formats Hodeyhbmtopfx Am Tor

Condition: used, Used Bottling Lines for edible oil 6000 bph General Configuration of the Bottling Line The Used Bottling Lines for edible oil 6000 bph line processes edible oil in 1-liter PET bottles, operating at a nominal speed of 6000 bottles per hour. The configuration includes equipment from multiple manufacturers, integrated to ensure continuous operation and reliability in filling, labeling, packaging, and palletizing. Operators correctly shut down the entire system in December 2022. At present, the machines are dismantled and stored in suitable conditions. Consequently, this line is immediately available for relocation and reuse. Overall, the structure represents a compact yet complete solution for medium-scale production. Container Formation: KOSME Blow Molding Machines Hedpfx Amewlt Dgj Tjr The Used Bottling Lines for edible oil 6000 bph line includes two blow molding machines from KOSME, model KSB3000, year 2001. Each unit works with a preform box and an automatic transport system that feeds the blower. As a result, the system supports on-site bottle production. Therefore, it reduces logistics costs and improves plastic material handling. In addition, the dual-machine setup enhances production continuity and minimizes downtime. Cooling System: MTA Chiller and Air Conveyors An MTA chiller, model TAE 051, year 2000, cools the molds in the blow molding machines. Moreover, KOSME air conveyors, model L2000, year 1999, made of AISI 304 stainless steel, transfer the blown bottles to the filling monoblock. Notably, the system includes electrical cabinets with integrated PLCs and built-in air filters. Thus, it ensures effective airflow control and maintains consistent air quality. From a technical standpoint, this contributes to long-term reliability and hygienic conditions. Filling Monoblock: ICS RVP-12/ZS-3N The ICS filling monoblock, model RVP-12/ZS-3N, year 1995, serves as the core of the Used Bottling Lines for edible oil 6000 bph. This machine doses edible oil with precision, ensuring product integrity and consistent fill volumes. Furthermore, the system synchronizes with upstream and downstream units. Consequently, it enables stable operation even under variable load conditions. Likewise, its mechanical construction supports easy maintenance and spare part replacement. Labeling Machine: ICS with Cold Glue An ICS labeling machine, model ERG-6/2/2, year 1995, applies paper labels using cold glue. Specifically, the machine ensures proper adhesion on PET containers. Additionally, it supports the 1-liter format used throughout the line. In practice, this technology remains widely adopted for edible oil packaging. Therefore, the labeling unit integrates efficiently into the overall production layout. To sum up, it provides a cost-effective solution without compromising performance. Internal Handling and Packaging ICS conveyor belts, installed in 1995, connect all key stations. Subsequently, the line transitions to the packaging phase.

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Filling Monoblock Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Capping unit for PCO 1810 PET bottles CIP (Cleaning-In-Place) connections Hjdpjwa Tqcofx Am Tjr Capacity to handle 1.5 l format Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Condition: used, 01. Product to be filled “CSD” 02. Type of Bottle RoundBottles Hjdpfx Amovgt Upj Tjr 03. M.O.C. of the Bottle PET Bottles 04. Fill Volume / Bottle sizes 500ml 05. Type of Caps Screw Caps 06. Type of Labels BOPP 07. Output required 416 Bottles Per Minute on 500 ml     BLOWER SIPA 16 CAVITIES 2007 WITH MAINTENNACE OPERATION: Used blow molding machine for PET bottles with production capacity up to 25,000 bph with the 500ml format. Year of construction, 2007. Used blower complete with Octagon tipper, Air recovery system, preform hopper. This machine is immediately available for sale and in case of request we can carry out pre-production maintenance. Detached from production in fully functional status is excellent opportunity for used equipment. We will build new neck personalization for pco 1881 We will build two new set of blow mould as per your request. Air conveyor system NEW/used revised 2024   NEW RINSER /FILLER/SCREW CAPPER, SPORT CAPPER: Auto Rotary 70 Head Rinser Cum 70 Head Counter Pressure Filling Cum 15 Head Rotary Screw Cap Sealing Machine,AND 15 HEAD SPORT CUP system Model Uinibloc : 70x70x15x15, fitted with Disc cap feeder, chute&shoe, SS safety hood, PLC/HMI of Schneider make, Electronic BPM meter & Counter, sensor at in feed & out feed. Fitted with one set of change parts of 250ml PET bottle. All Product Contact Parts like Tank, Valves & all product contact parts will be SS316Grade. Output – 416BPM on 500 ml bottle. Fully Automatic Bulk Cap Elevator Additional Set of Change Parts If Required RINSING SECTION : TOP OF THE ROTARY RINSSER S. SLAT CHAIN CONVEYOR Body fabricated out of pre-polished S.S. Sheets, of 8’ length for carrying empty bottles to water rinsingnozzles and rinsed bottles to the Filling Machine. BOTTLE GRIPPING HEADS The gripping heads hold the bottles by neck. The bottle carrying grippers are supported by carousel thatby turning makes the grip lever arms slide on a fixed helical guide. In this way the bottles areturned upside down to have the openings atthe bottom to coincide with spray nozzle. AIR CLEANING PROCESS The bottles when rotated are brought into theline with the fixed nozzle in such a way thatits opening partially contains the nozzle. Airjet cleaning air sprayed inside the bottle forpresettime. VACUUM PROCESS The bottles when rotated are brought into the ine with the fixed nozzle in such a way that its openingpartially contains the nozzle.

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Hodpfxjvguttj Am Tor Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Measurements: Length: 800mm Width: 900mm Height: 2600mm Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: used, Used Isobaric Complete PET Line for Soft Drinks 6000 bottles/h The line consists of: A Kosme KSB 4 L PET blow molding machine from 2004 with a speed of 6800 bottles/h for 0,5L, 6000 bottles/h for 2L, 5200 bottles/h for 2,5L Air conveyor from blowing machine to filler. MAS Mixer from 2004. Hodpfxjvguyaj Am Ter MAS rinser, filler and capper from 2004, renovated in 2015, capacity 0,5l – 10.000 palack/h, 1,5l – 5000 units, rinser cranes – 32 units, filling valves – 32 units, cork heads – 8 units. BAT forum labeller type EBI 07 year 2006, capacity 1500-6500 units/hour, dimensions 2450x90x950-1300. BAR forum packer year 2005, capacity 12 packages/min. Conveyors, Cyklop International automatic stretch wrapper type GL215 year 2003, turntable 8 mm steel plate resting on 12 supporting rollers, feeder ramp 5 positions possible, power supply 230/440V, three-phase, 50Hz+Neutral; pallet load length/width max. diameter of 1675mm (*2000mm), pallet height – 2200mm (*2600mm), pallet weight max 1500kg (*2000 kg)

Condition: used, Processing and Filling Line for Dairy Products up to 20,000 L/Day This processing line efficiently manages volumes between 15,000 and 20,000 liters of milk per day. Consequently, it ensures high efficiency and the highest quality of finished products. Its capacity thus enables a high daily production return, which is crucial for large-scale operations. Packaging Capabilities Moreover, the line’s specialized packaging system adeptly handles various types of dairy products. For example, workers pack milk in 1.0-liter PVC bags at a rate of 2,400 pieces per hour. Additionally, they package yogurt and kefir in 410-gram and 180-gram containers at a capacity of 3,000 pieces per hour, as well as in 0.5-liter and 1.0-liter PET bottles at a rate of 1,000 pieces per hour. Furthermore, workers package sour cream in both 1,000-gram containers and bowls, each at a capacity of 3,000 pieces per hour. Similarly, they pack cheese in 5.0 kg and 10.0 kg containers for fresh cheese, and in vacuum foil from 500 and 1,000 grams for sliced cheese. Equipment Specifications Manufacturers in Italy, Slovenia, and Serbia constructed the equipment between 1999 and 2016, showcasing the quality and durability of the machines. Specifically, the milk reception unit features digital counters and foam removal systems updated in 2014. It includes horizontal and vertical tanks with capacities up to 3,200 liters, ideal for storage and cooling. Fermentation Units and Filling Lines Insulated duplicators with double walls and planetary mixers support the line’s fermentation functionalities, which are essential for maintaining product uniformity during fermentation. Likewise, automated filling lines distribute sour cream, yogurt, and milk in various packaging formats efficiently, thereby maximizing productivity and reducing downtime. Equipment Complements and Maintenance Additionally, the line includes accessories such as a triblender for powdered milk, vacuum packaging machines for cheese, and cooling systems for warehouses. These components are crucial for extending preservation and ensuring food safety. The team has regularly serviced and maintained the equipment until production ceased in 2020, thereby demonstrating a consistent commitment to maintenance and operational efficiency. In conclusion, these details highlight the line’s capability to produce high volumes and its configuration to ensure versatility and reliability over time, which are key for those operating in the large-scale dairy sector. Hodpfjvgvrwjx Am Tjr List of line components: Milk receiving unit Digital counter with foam remover (2014) Horizontal tank (lactofreeze) capacity 3.200 l cooling on freon – 3 pcs Vertical tank capacity 3.000 l – 2 pcs Unit for pasteurization Pasteurizer (flow) with retainers  capacity 2.000 l Separator (self-cleaning), capacity 2.000 l Homogenizer capacity 2.

Condition: used, machine/vehicle number: LC521, Used bottling line PROCOMAC for still and sparkling water up to 12000 bph Hsdpfevgu Tyex Am Tsr We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC monoblock unifies three critical bottling functions into a single system. First, the PROCOMAC GRIPSTAR 2R rinser cleans bottles thoroughly, preparing them for the filling process. Then, the PROCOMAC FILLSTAR PET filler quickly and accurately fills bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper applies caps securely and efficiently. Moreover, the saturator and CIP (Clean-In-Place) system maintain hygiene standards and streamline maintenance operations. These additional components not only enhance the monoblock’s efficiency but also ensure reliable performance during production. Transport and Packaging Systems The PELACCI P.13.8.5 cap elevator consistently supplies caps to the system without interruptions. In addition, the PE ROLLMATIC CI 540 12T labeler applies labels accurately to bottles of different formats. Subsequently, the ZAMBELLI LFT 50 shrink wrapper quickly packages bottles into bundles, while the COMAG H 55/1 handle applicator attaches handles to bundles for easier transport. Furthermore, the LEVATI ARTIS palletizer organizes bundles onto pallets with precision. Similarly, the ROBOPAC HELIX HS 30 pallet wrapper wraps the load securely to protect it during transportation. Lastly, the EIDOS labeling system prints and applies labels directly on the production line, allowing for full customization, which ensures adaptability to various production requirements. Conveyor Belts for Optimal Flow The conveyor belt system facilitates efficient material flow across the production phases. Specifically, air conveyors move bottles swiftly, while dedicated belts transport bundles and pallets seamlessly between sections of the line. Consequently, these systems maintain a continuous and smooth workflow, which significantly reduces production downtime. Current Status and Availability This Used bottling line PROCOMAC for still and sparkling water up to 12000 bph operates efficiently and will remain in use until April 2025, when it will be dismantled and replaced. Therefore, we encourage interested buyers to view the line in operation before dismantling to evaluate its performance and condition. Ultimately, this complete and integrated solution delivers reliable and high-performing bottling capabilities for industrial water production.

Condition: used, Used Complete Filling Line Ada 2000 FILLING LINE FOR CARBONATED AND NON-CARBONATED DRINKS Manufacturer: Specijalka – Ada – Serbia – 2000 Hjdpsvgur Nofx Am Ter Capacity: 1.200 bph x 2 L PET Equipment specification: -FILLER 24 valves -CAPPER 1 head -LABELING – paper cut labels, cold glue -SHRINK WRAPPER – semi-automatic, manual stacking of bottles -SATURATOR -4 sugar bowls -6 CO2 bottles -Air dryer The equipment is in perfect condition, turned off in 2019. At the overhaul in 2018, all bearings were replaced.

Condition: used, Used Complete Bottling Line Procomac 2000 1. Blow-mouldingmachine Typ SIPA SF12/8 (2002) 2. Chillerfor SIPA machine (2002) 3. Compressor Typ Kaeser (2002) includes: Air receiver 1000 liter, 16 bar, Mikrofilter/Carbonfilter, Screw-compressor CS121/12 bar Air receiver 1000 liter, 45 bar, Pre-filter HP-Compressor (Booster) N753-G HP- Airdryer THP 142 48 Microfilter, Carbonfilter 4. 40m Airconveyor Typ Procomac (2002) 5. Rinser-Filler-Capper24/24/6 Typ ProcomacMuvitec(2000) Capper also for sports-cap incl. 6. Labellingmachine Type Futura, hotglue (2000) 7. Bottleinspector Type Logis&Controls (2000) 8. Bottle transporter Krones (speed-controled) (2000) Hodpfx Aovgulcem Tjr 9. Handle Applicator Twinpack (2000) 10. Packingmachine & Shrinktunnel Kettner (2001) 11. Packing-robot Profipac (2005) 12. Wrappingmachine Robotec (2002) Formats 1. O.5 liter bottle height 220mm Diameter 66mm Label 215 x 70mm 2. 1.5 liter bottle height 334 mm Diameter 95 mm Label 285 x 100mm