Used Pillar Press for sale (13,982)

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Iasdpfx Ajx Sxukspnet Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, pressing force: 15 t, table width: 300 mm, table length: 400 mm, Hydraulic clutch CE-Safety 2e hand opperator system Adjustable stroke / ram  Full set books / drawing / CE-Mark Note in the Neck / Throath machine is repaired ! Only EUR 5500 Capacity Kg: 15000 Table Length: 400mm Table Width: 300mm Hole in table:150mm Iaodpfoyc R Nmjx Apnjt Working height:280mm Throat: 2170mm Stroke: 50mm Ram adjustment:4 - 80mm Length: 1500mm Width: 1500mm Height: 2100mm Weight: 1200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2000, Capacity Kg 15000 Table Length 400 mm Table Width 300 mm Hole in table 150 mm Working height 280 mm Throat 2170 mm Stroke 50 mm Ram adjustment 4 - 80 mm Hydraulic Clutch CE-Safety 2e hand opperator system Iodpfoyc R Uiex Apnjat Adjustable stroke / ram  Full set books / drawing / CE-Mark Length:1500mm Width:1500mm Height:2100mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2006, Table size 3500 x 2500 mm Iodpfexam Sdsx Apnjat Siemens Simatic OP7 controller Max. work load 80 Ton New price 1 Mil EUR Working force up to 250 Bar Power 30 kW Distance between column:3700mm Hight under roof: 2650mm Table Length: 3500mm Ram stroke: 2100mm Approche speed: 80mm/min. Working speed: 8mm/min. Return speed: 50mm/min. Length: 7800mm Width: 5500mm Height: 6510mm Weight: 135000kg

Condition: excellent (used), Year of construction: 2000, stroke length: 850 mm, operating speed: 8 mm/s, total length: 15,400 mm, total width: 6,500 mm, total height: 11,400 mm, overall weight: 407,000 kg, controller manufacturer: Cybelec DNC 1200, working width: 15,400 mm, bending force (max.): 2,000 t, distance between stands: 12,000 mm, number of axes: 8, Extra Heavy Duty Pressbrake 1 set top tooling 88 Gr 1 set lower dies Cybelec DNC 106EC controller Y1,Y2,X,R1,R2,R3,R4,OWK Dynamic Crowning Lower Beam What kind off jobs built for: Shipbuilding & Naval like ; Hull sections, deck plates, bulkheads ribs Defence & Military; armored vehicle structures, reinforced structe hardox / strenx Mining and Heavy Equipment; dump bodies, crusher housing, excevator, chute liners Contruction and Fabrication; bridge giders, box columns, steel frames  On and Offshore; pilers, decks, spreaders, crane componenet, wind energy offshore parts Boiler an vessels; pressure vessels, power plant components, tower or pole section   Bending examples: 35 mm thickness at 10 meter length 26 mm thickness at 12 meter length 20 mm thickness at 15 meter length Max. bending length: 15400mm Distance between column: 12000mm Max. pressing force: 2000T Dis. Beam - Table: 1500mm Beam stroke: 850mm Troth beam: 1250mm Approch speed: 80mm/min. Working speed: 8mm/min. Return speed: 80mm/min. Iaedpjyvh Arofx Apnst Number of controlled axis:10 Crowning: Yes Hydraulic toolclamping: Yes Power: 132kW Length: 15400mm Width: 6500mm Height: 11400mm Weight: 407000kg

Condition: excellent (used), Year of construction: 2014, operating speed: 8 mm/s, reverse speed: 100 mm/s, total length: 2,470 mm, total width: 2,000 mm, total height: 2,100 mm, overall weight: 3,800 kg, controller manufacturer: CYBELEC CNC, working width: 2,100 mm, bending force (max.): 40 t, distance between stands: 1,650 mm, control type: CNC control, number of axes: 4, actuation type: hydraulic, Press brake TOSKAR - TA 2100-40 MACH-ID 9474 Make: TOSKAR Type: TA 2100-40 Control: CYBELEC CNC Year: 2014 Cybelec 2D Controll system 4 Axis controlled Y1 / y2 / X / Delta-R 1 set universal tooling Fiessler laser safe  Sheet support arms front side Max. bending length: 2100mm Distance between column: 1650mm Max. pressing force: 40T Beam stroke: 130mm Table Width: 100mm Troth beam: 300mm Ijdpfxeyw Ip Is Apnoat Approch speed: 100mm/min. Working speed: 8mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1009mm Number of controlled axis: 4 Power: 5.5kW Length: 2470mm Width: 2000mm Height: 2100mm Weight: 3800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: Millutensil Type: BV 25 PM Year of construction: 1987 Closing force up to 18000 Kg Opening force up to 15000 Kg Driven table in & out feed Upper table 270 Gr Upper size 900 x 550 Specifications Metric US Standard Distance between uprights 930 mm Installation height 760 mm Table length 755 x 755 mm ram stroke 600 mm Starting speed Iajdpferr Ui Rjx Apnjt 1000 mm/min. Working speed 1000 mm/min. Return speed 1000 mm/min. Table rotation 360 rpm Dimensions (estimate) length 1350 mm width 1350 mm Height 2000 mm weight 1500 kg

Condition: excellent (used), Year of construction: 2004, power: 25 kW (33.99 HP), stroke length: 350 mm, operating speed: 10 mm/s, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, overall weight: 22,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Delem DA 65W, working width: 4,300 mm, bending force (max.): 230 t, distance between stands: 3,700 mm, control type: CNC control, number of axes: 5, actuation type: hydraulic, Press brake Iajdpfx Aeyvh S Tepnot DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1993, Used 3 meter CNC press brake by Safan Model: CNCL 80 3100 Capacity: 3100 x 80 tons Y1, Y2, and X axes CNC controlled CNC crowning Flat pressure table Year of manufacture: 1993 Ijdpfx Apey Nydzsnsat

Condition: used, Year of construction: 1990, Used 4 meter press brake Type: Haco PPES 40110 Capacity: 4100 x 110 tons Y1, Y2 and X CNC controlled Euro tool clamping system PC20 CNC control Iasdpey Nyc Refx Apnst 1 set of tools included (not shown in pictures) Year of manufacture: 1990

Condition: good (used), Year of construction: 2002, FOR SALE Double Crank Press ARISA 630 Tons Brand: ARISA (Spain) Model: S2-630-350-150-ES Year of Manufacture: 2002 Type: Double crank mechanical press (S2) – High performance Technical Specifications (Certified Data): This press is a heavy-duty production unit designed for extremely high precision on large workpieces. Nominal Force: 630 tons (6,300 kN) Table Dimensions: 3,500 mm x 1,500 mm Slide Dimensions: 3,500 mm x 1,500 mm Slide Stroke: 200 mm Slide Adjustment: 150 mm Working Speed: Variable from 20 to 50 strokes/minute Maximum Force Point: 13 mm before the bottom dead center Electrical & Mechanical Specifications: Motor Power: 92 kW Total Machine Weight: 145,000 kg (145 tons) Iasdpsy Sl Rlofx Apnst Striking Energy: Ideal capacity for deep drawing and progressive cutting applications Clutch/Brake System: Pneumatic (required pressure 5.5 – 6 bar) Balancing: Adjustable pneumatic counterbalance Power Supply: 380 V Key Features: Large Working Area: 3.5-meter table allows for complex or multiple tooling setups S2 Stability: Double crank design ensures uniform pressure distribution, preventing slide tipping Condition: 2002 machine compliant with modern safety and control standards.

Condition: used, Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Documentation available: No - CE certificate present: No - Number of cylinders [pcs]: 6 - Heating type: Oil heated - Max. working temperature [°C]: 140 Ijdpfx Aswnhabspnjat Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2020, VETTER Pillar Jib Crane PS10-2.0 Sale from site! Manufacturer: VETTER Krantechnik Type: PS10-2.0 Year of manufacture: 2020 Factory No.: 2000204/01 Design: Pillar jib crane with electric chain hoist For sale is a used VETTER pillar jib crane suitable for industrial environments, workshops, production, assembly, and maintenance. This crane is ideal for lifting, positioning, and relocating workpieces, components, and machinery parts. Technical Data: Load capacity: 1,000 kg / 1 t Jib length: 2,000 mm Slewing range: approx. 270° Overall height: approx. 3,000 – 3,500 mm Estimated dead weight: approx. 350 – 500 kg Actual dimensions and weights may vary depending on configuration, column height, and installed electric chain hoist. Ijdpfx Apsy Rkbmsnjat Equipment: VETTER pillar with jib arm Electric chain hoist Load hook Pendant control / handheld operation Schneider Electric control element Main disconnect switch Base plate mounting Industrial design Condition: Used machine with age- and use-related signs of wear. Visual condition as shown in the images. Scope of delivery: VETTER Pillar Jib Crane PS10-2.0 Electric chain hoist Pendant control / handheld operation Scope of delivery as shown Inspection by appointment possible. Commercial sale – Sale without warranty. Subject to alterations and errors.

Condition: excellent (used), Year of construction: 2020, VETTER Column-Mounted Slewing Crane PS10-2.0 Sale ex location! Manufacturer: VETTER Krantechnik Model: PS10-2.0 Year of manufacture: 2020 Serial no.: 2000204/01 Design: Column-mounted slewing crane with electric chain hoist For sale is a used VETTER column-mounted slewing crane suitable for industrial, workshop, production, assembly, and maintenance applications. The crane is designed for lifting, positioning, and relocating workpieces, components, and machine parts. Technical data: Load capacity: 1,000 kg / 1 t Jib length: 2,000 mm Slewing range: approx. 270° Overall height: approx. 3,000 – 3,500 mm Estimated dead weight: approx. 350 – 500 kg Actual dimensions and weights may vary depending on version, column height, and installed electric chain hoist. Iasdpey Ri T Iefx Apnot Equipment: - VETTER column with jib arm - Electric chain hoist - Load hook - Pendant control - Schneider Electric control unit - Mains isolator switch - Base plate mounting - Industrial-grade design Condition: Used machine with age- and use-related marks and wear. Visual condition as shown in the pictures. Scope of delivery: - VETTER column-mounted slewing crane PS10-2.0 - Electric chain hoist - Pendant control - Scope of delivery as shown Viewing by appointment possible. Commercial sale – sold without warranty. Subject to alterations and errors.

Condition: used, Year of construction: 2012, operating hours: 5,812 h, functionality: fully functional, Baler Presto HPK 50 HS, year of manufacture 2012, with perforator and incline conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive power: 30 kW Press force: 50 t Feed opening: 1,600 x 650 mm (L x W) Chamber cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput rate at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Ijdey R Tp Tjpfx Apnoat Clear feed opening: 1,380 x 1,200 mm Incline conveyor Length: 7,931 mm Belt width: 1,400 mm Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, cardboard, film, PET bottles Please note: All technical specifications are based on manufacturer information. We do not accept liability for the accuracy of these specifications or for potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections by prior arrangement are possible. Sale is ex-works, subject to prepayment, with no warranty or guarantee.

Condition: good (used), Year of construction: 2021, operating hours: 123 h, functionality: fully functional, Vertical Baling Press HSM V-Press 860 plus, Year of Manufacture 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 123 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Iedpfx Ajy R Tncspnsat Bale weight: 480 kg Tying: manual Theoretical idle cycle time: 25 s Theoretical press output: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer information. We do not assume liability for any provided information or possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: good (used), Year of construction: 1998, operating hours: 385 h, functionality: fully functional, color channels: 8 color, paper weight (min.): 40 g/m², paper weight (max.): 400 g/m², paper width (min.): 280 mm, paper width (max.): 720 mm, paper height (min.): 400 mm, paper height (max.): 1,020 mm, total length: 720 mm, total width: 11,500 mm, total height: 3,200 mm, space requirement length: 13,500 mm, space requirement width: 2,500 mm, space requirement height: 2,500 mm, counter reading (black): 385, counter reading (color): 385, year of last overhaul: 1998, type of input current: three-phase, input current: 200 A, input voltage: 400 V, Equipment: documentation/manual, HEIDELBERG SPEEDMASTER SM 102-8-P OFFSET PRINTING PRESS 8 Colors + Perfecting 4+4 | CPC 1-04 | Autoplate | In Production Year: 1998 Impression Count: 359 Million Availability: Immediate Iaodpfx Ajy Sg Dmepnet HIGH PERFORMANCE HEIDELBERG SPEEDMASTER 102-8-P AVAILABLE FOR IMMEDIATE SALE This well-maintained Heidelberg Speedmaster SM 102-8-P is currently visible in production and operating in Good condition. Equipped with advanced Heidelberg automation systems, this machine delivers high productivity, stable register accuracy, and premium print quality for commercial printing operations. The machine with complete NEW ink rollers and dampening rollers for all 8 printing units. Ideal for: • Commercial printing • Packaging printing • Magazine production • High-volume offset printing • Brochures, catalogs & advertising materials • International print production facilities TECHNICAL CONFIGURATION: • CP Tronic Control System • CPC 1-04 Ink Control • Alcolor Dampening System • Autoplate Semi-Automatic Plate Changing • Auto Blanket Wash • Autoregister • Electronic Double Sheet Control • Electronic Side Lay Control • High Pile Delivery • Sheet De-curler • Antistatic System • Steel Plate in Feeder & Delivery • Super Blue Package • Technotrans Refrigeration & Re-circulation • Weko Powder Spray MACHINE CONDITION: • Machine visible in production • Good mechanical condition • Full new ink rollers will be installed • Full new dampening rollers installed • Clean and professionally maintained dismantling, loading, and shipping assistance can be arranged. Contact us today for: Additional photos & videos Heidelberg SM 102, Heidelberg Speedmaster, 8 color 4+4 offset press, perfecting printing press, used Heidelberg printing machine, commercial printing press, Heidelberg CPC 1-04, offset printing machine , Heidelberg Autoplate, Heidelberg SM102-8P, industrial printing equipment, used offset press for sale, Heidelberg printing machinery, sheetfed offset press, Heidelberg printing machine

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Iaodpfoy R Srtsx Apnst Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: used, Year of construction: 2008, machine/vehicle number: 10322T, functionality: fully functional, pressing force: 120 t, stroke length: 355 mm, table width: 1,560 mm, table length: 3,100 mm, total length: 4,200 mm, total width: 1,800 mm, total height: 2,080 mm, overall weight: 9,000 kg, Equipment: documentation/manual, We offer this used Interwood HOP veneer press, year of construction 2008. Location: Maryport, Cumbria, UK 18000GBP (with VAT) Ijdey Ah T Rjpfx Apneat 15000GBP exVAT Open to offers 20m cable and distribution box included in price. Type: HOP Serial number: 10322T Year of manufacture: 2008 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2021, total length: 3,720 mm, total width: 2,300 mm, total height: 2,750 mm, Colour: White Weight: 7.700 kg Price: On request - Year: 2021 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 2102061 - Drive system: CNC - Control system brand: Cybelec - Control system type: Cybtouch-8W - Power [kW]: 11.0 - Number of axes [pcs]: 4: Y1+Y2+X+R - Press force [ton]: 135 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Throat depth [mm]: 410 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 210 - Punch holder: Standard - Tool holder type: European-style Iaedpsy N Aupjfx Apnet - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 3720mm x 2300mm x 2750mm (l x w x h) - Transport weight [kg]: 7700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, functionality: fully functional, This listing is for a second-hand ‘Schulze Air 4 Press’ pneumatic rotary press Condition: Iaodpey R Nm Usfx Apnet This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The unit has been tested for functionality Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, This listing is for a second-hand DTG/DTF printer, the ‘Brother GTX 423Pro’ Items included: 1 x Brother GTX 423Pro with the following accessories: Includes Lotus Heat Press LTS 150B Slide Includes Schulze PreTreat maker 5 Meter readings: Total: Approx. 5,500 prints Condition: Iodpfx Apoy R Nmhoneat This listing is for a second-hand device, which may show signs of use (minor scratches or discolouration). The device has been tested for functionality A test print can be seen in the photo Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2004, total length: 8,000 mm, total width: 2,200 mm, total height: 2,450 mm, Colour: White Empty weight: 10.000 kg Price: On request - Details: - └ Description: 2 work fields per side - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 1729 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece width [mm]: 5500 - Max. workpiece height [mm]: 980 - Number of working fields [pcs]: 8 Iaedpfx Apsy Nxv Ajnot - Number of cylinders per press level [pcs]: 10 - Number of clamps per press level [pcs]: 10 - Options: Separate pressing levels, Motorized rotation - Transport dimensions: 8000mm x 2200mm x 2450mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 50 mm throat 350 mm bore stroke 180 mm thread capacity 35 M spindle taper MT 4 MK column diameter 150 mm bore spindle turning speed range 132-1852 U/min table-size 480x480 mm Ijdjwp Tnmjpfx Apnjat

Condition: new, Year of construction: 2025, pressure 060 t Iajdpfx Ajxu Nvzspnst stroke 350 mm table surface area 750x344 mm dayligth 197/750 mm distance between columns 750 mm diameter of piston 75 mm