Used Plan Lathe for sale (9,277)

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 508 mm, turning diameter: 330 mm, spindle speed (max.): 3,400 rpm, center width: 610 mm, TECHNICAL DETAILS Swing diameter: 330 mm Turning length: 508 mm Swing diameter over bed: 585 mm Swing diameter over cross slide: 241 mm Spindle speed: 3,400 rpm Bar diameter: 63 mm Distance between centers: 610 mm Dsdpfx Ais Ah H Itozswd Travel in X-axis: 214.6 mm Travel in Z-axis: 508 mm Tool holder: VDI 40 MACHINE DETAILS Total power requirement: 15 kW Dimensions & Weight Dimensions: 2,800 × 1,800 × 1,800 mm Machine weight: approx. 4,100 kg EQUIPMENT Bar feeder Servo Bar 300, 1.5 m 3-jaw chuck Collet chuck Tailstock Various tool holders

Condition: excellent (used), CATALOGUE NUMBER 6901 TECHNICAL DATA - Max. turning length: 1200 mm - Max. turning diameter: 210 mm - Max. turning diameter with standard support: 90 mm - Max. dimensions of square material for turning with automatic feed: 100 mm - 3 hydraulic copying units - Additional 3 cutting tools on hydraulic pistons (2 installed) - 4 types of spindle speeds - Automatic or manual machine operation - Spindle motor: 9 kW - Hydraulic pump motor: 3 kW - Diameter of extraction port: 90 mm - Dimensions for transport (L/W/H): 3700x2100x2000 mm - Weight: approximately 3000 kg ADVANTAGES - Made in Italy - Automatic hydraulic copying unit Dedpfjzu R S Rjx Aizswd - Original DTR documentation - Unpainted - Used lathe, very good condition Net price: 57,900 PLN Net price: 13,465 EUR Net price calculated using an exchange rate of 4.30 PLN/EUR (price may change in the event of significant exchange rate fluctuations)

Condition: used, A conventional center lathe is offered. Equipped with manual gear and feed selection, saddle, cross slide and compound slide, tool holder, tailstock with handwheel, rear splash guard, machine light and machine stand with chip pan. Inspection possible by arrangement. Djdpj Ahi Sxofx Aizewd

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 2,200 kg, Equipment: documentation/manual, # TAKAMAZ SX-07 CNC lathe with FMB bar feeder – manufactured in 2002 For sale is a CNC lathe from the Japanese manufacturer TAKAMAZ, model SX-07, manufactured in 2002. The machine was fully functional until it was decommissioned and was subsequently professionally dismantled and stored. Dodpj Ah Eitofx Aizjwd The complete system will be sold including the bar feeder magazine, chip conveyor, extraction system, and accessories. ## Technical data - Manufacturer: TAKAMAZ / Takamatsu Machinery - Model: SX-07 - Year of manufacture: 2002 - Control: FANUC Series 21i-T - Serial number: 940011 - Machine weight: 2,200 kg according to the nameplate - Tool turret - Main and counter spindle ## Operating data according to the control system - Control system switched on: 95,815 hours - Feed time: 23,599 hours - Total part counter: 8,324,144 pieces ## Equipment - FMB Turbo 3-26 bar feeder magazine (year of manufacture unknown) - Chip conveyor - Extraction system - Various tool holders and accessories as shown in the pictures - Operating manual available ## Condition and inspection The machine was fully functional until it was dismantled. It has already been dismantled and stored, but can be powered up for inspection. A complete machining demonstration cannot be guaranteed in the stored condition. Inspection is possible after prior appointment. Sale from warehouse. Loading and transport by arrangement.

Condition: new, Year of construction: 2024, operating hours: 50 h, functionality: fully functional, spindle motor power: 3,700 W, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 20 mm, spindle bore: 25 mm, rotational speed (max.): 10,000 rpm, rotational speed (min.): 10,000 rpm, bar passage: 20 mm, bar diameter (max.): 20 mm, Equipment: rotational speed infinitely variable, MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 25 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Travel Z1 [mm]: 205, long turning mode Travel Z1 [mm]: 55, short turning mode Type of collet: 145E Synchronously rotating guide bushing unit Type of guide bushing: T223 TAILSTOCK Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 Maximum turning diameter [mm]: 20 Max. part length, eject forward [mm]: 80, Option 120 C-axis with 0.001° Travel Z2 [mm]: 255 Type of collet: 145E TOOLING OPTIONS Tool slide X1, Y1: - Tool holder plate for 6 external turning tools 12 x 12 mm Cross drilling/milling unit: - Number: 4 modular, driven drilling/milling spindles (Tools 4 x ER16) - Manual B-axis 3 x ER 16 - Power: [kW]: 2.5 (S6000) - Swiveling range 90° (0° ~ 90°) Dwjdpfx As Ahy Tzjized Cross slide, tailstock - Number: 3 fixed drilling stations ER16 Rear-end machining with Y2 axis, travel 60 mm - Tool carrier for 8 tools - 4 modular, driven drilling/milling spindles ER11 - 4 fixed drilling stations Ø 19.05 mm AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Connected load [kVA]: 15 CONTROL Control type: Fanuc 32iB Plus Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External operating panel with handwheel 10.4" color monitor LCD/MDI Automatic shutdown function PowerOff Program check function (test run via handwheel possible) Continuous threading cycle Running time display / part counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function Interface for bar feeder Interface for JBS Weight 2.95 tons ACCESSORIES Alignment feet with leveling elements Toolbox and service tool set Work area light Signal lamp (3-color) Safety door switch with locking Maintenance and central lubrication unit (1.8 liter lubricant volume) Coolant flow monitoring Pneumatic blow-out device for tailstock collet Manual and documentation in German and English (Maintenance and operating instructions including parameter list and test report)

Condition: used, Year of construction: 2020, operating hours: 19,485 h, spindle speed (max.): 5,000 rpm, overall weight: 10,000 kg, CNC Lathe Manufacturer: DMG MORI Model: SPRINT 65 2T Year of manufacture: 2020 Control system: Siemens 840D sl Operate Technical details: Spindle speed: 5,000 rpm Number of tool stations: 2 x 12 Machine weight: approx. 10 t Operating hours: approx. 19,485 h Spindle hours: approx. 9,037 h Condition: Used Available from March 2027 Technical features & accessories: - 3 cross slides - 2 turrets, 12-station (driven/live tooling) - 2 C-axes - Y-axis on slide 1 - Y-axis on slide 2 - Chip conveyor - Breuning bar loader Dwjdpfx Aie Advfxjzed Accessories, tools, and work-holding devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: not inspected (used), Year of construction: 2000, machine/vehicle number: 3244.00, total length: 2,700 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 2,800 kg, DMT Kern CD 480 Lathe Pickup must take place by November 12th! Technical data: Control: Heidenhain Manual Plus 3110 Working area: Swinging diameter over bed: 475 mm Swinging diameter over cross slide: 260 mm Cross slide travel: 260 mm Distance between centers: 1,000 mm Turning length: 880 mm Headstock: Spindle head DIN 55026: Size A6 Spindle diameter in the front bearing: 115 mm Spindle bore: 78 mm Standard chuck sizes: 200/250 mm Speed range (constant speed): 1–3,000 rpm Cross slide: Feed rate, facing: 0.001–1000 mm/rev Feed rate, longitudinal and threading: 0.001–2000 mm/rev Rapid traverse, facing/longitudinal: 5/10 m/min Tailstock: Arbor diameter: 70 mm Arbor travel: 120 mm Arbor internal taper: MK 5 Scope of delivery: No additional accessories The center and the jaws in the chuck are not included in the scope of delivery! Dimensions & Weights: Installation dimensions L x W x H approx.: 2700 x 1500 x 2000 mm Weight approx.: 2800 kg Dwedpfx Aie Af U Icjzsd If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►On request, we can offer transport to the destination. ►The quoted price is net, plus VAT. ►The goods are sold excluding any warranty. ►Technical data subject to change. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: ready for operation (used), Year of construction: 1999, operating hours: 53,000 h, functionality: unexamined, workpiece diameter (max.): 150 mm, overall weight: 8,000 kg, Equipment: cooling unit, documentation/manual, For sale is a twin-spindle vertical turning machine for workpieces with a diameter of up to 150 mm. The machine was put into production in 2025 and is currently in our warehouse. The machine can be connected to the power supply for a demonstration. The machine features a 20-bar coolant system, chip conveyor, 8 tool positions per spindle, and an oil mist separator. It also includes an automatic part feeder with a part storage system. Djdps Ah T Evjfx Aizowd Further information can be found in the technical data sheet, see below.

Condition: good (used), Year of construction: 2011, workpiece weight (max.): 20 kg, turning diameter: 250 mm, torque: 256 Nm, power: 45 kW (61.18 HP), CNC vertical turning lathe Manufacturer: EMAG Type: VTC 250 Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Main spindle: Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Feeds: Rapid traverse (x / z): 40 / 30 m/min Dwode Agr Dyspfx Aizjd Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Price per machine. Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, L & Z Lathe WEILER CONDOR B incl. three-axis digital display -CE marking -Machine from an educational institution / very well maintained -Center height 165mm -Swinging diameter over bed 330mm -Swinging diameter over cross slide 185mm Dwedpfx Aezvx A Tjized -Turning length 800mm -Spindle speeds 22 - 2800 rpm -Automatic / longitudinal and cross feeds -Threading / metric / inch, etc. -Bar capacity 40mm -Tailstock / Morse taper MT3 -Multifix base and inserts -Three-jaw chuck 200mm -Electric chuck guard -Spindle cover -2x Emergency stop -Coolant system -Chip guard -Documentation Dimensions: L x W x H 1.8 x 0.8 x 1.6 meters / Weight 1200 kg Errors and omissions excepted.

Condition: used, Year of construction: 2015, functionality: fully functional, spindle motor power: 7,500 W, spindle speed (min.): 7,000 rpm, overall weight: 4,300 kg, total width: 1,440 mm, total height: 1,865 mm, Start SV-38R including bar magazine, model FMB turbo 5-55. The machine is fully functional and requires no repairs. Operating time: 25,000 hours. Dodpfxe Aidq As Aizowd Currently, the machine can be confirmed to be operating under power.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 47167, turning diameter over cross slide: 400 mm, turning diameter: 600 mm, turning diameter over bed slide: 400 mm, center height: 310 mm, turning length: 4,000 mm, total length: 5,800 mm, total width: 1,700 mm, total height: 1,740 mm, overall weight: 4,300 kg, Conventional lathe Center distance 4 meters Swing diameter 620 Center height above the carriage 210 Dedpfx Aijz D D Stozowd Rapid traverse

Condition: used, Year of construction: 1977, functionality: fully functional, Weiler Condor VS2 lathe, manufactured in 1977, with a three-jaw chuck, Multifix system, and collet chuck attachment with a set of collets. The machine is in working condition and can be demonstrated under power upon request. Dwedpfxs Aih R Ue Aizod

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 665 mm turning dia. over face-slide: 530 mm turning length: 750 mm max. turning diameter: 395 mm longitudinal traverse (z-axis): 500 mm facing movement (x-axis): 600 mm control: TX8H spindle passage: 80 mm revolution per minute: 60 -12.000 U/min tool turret - number of stations: 24+1 operating hours - idle run: 26466 h operating pressure: 6 bar diameter of quill: 85 mm quill stroke: 140 mm tool taper: ISO 40 total power requirement: 36 kW Weight approx.: 6,6 t Djdpfxjz Ndq Ts Aizjwd dimension machine approx.LxWxH: 4,8 x 3,5 x 2,8 m The TRAUB TNA 400 is a high-performance CNC turning machine designed for the precise complete machining of turned parts. Equipped with the proven TRAUB TX8H control system, the machine is suitable for both single-part and series production. It features a hydraulic chuck, tailstock, and a fully enclosed working area with a coolant system. Its robust design ensures high precision and reliable process stability in continuous industrial operation. Equipment: ·TX8H CNC control ·Swivel table ·Central lubrication system ·Coolant system ·Spindle cooling ·Spindle air blow function ·Working area lighting ·Chip flushing nozzles ·Electronic handwheel ·Leveling elements ·Signal tower light ·Manual wash gun ·Macro programming ·NAVI-MILL workshop programming ·Programming cycles ·Program runtime calculation ·Parts counter ·Intelligent handwheel ·Tool magazine with 24 + 1 tool positions *

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Dsdpfx Aswf Sfvoizswd Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2027, NEW MACHINE TECHNICAL DATA: Working diameter 1600mm Max. workpiece height 1000mm Max. workpiece weight 6300kg Face plate diameter 1400mm Face plate rotation speed 0-200rpm Max. torque on face plate 25000Nm Performance of main drive 75kW SETTINGS: -5-fold turret or quill support -Zentral lubrication SKF/VOGEL -2 step main gear -24 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -Capto tool holder system -tool magazine -machine housing -chip conveyor -cooling water preparation Dwedod I Au Ropfx Aizjd -Side support -... CONTROL: CNC Fagor / Siemens OTHER: Geometrical-acceptance according DIN8609

Condition: used, Technical details: number of spindles: 9 Stück total power requirement: 83,0 kW Dodpfsu Idvkjx Aizjwd weight of the machine ca.: 17,0 t TRANSFERAUTOMAT with 9x drill-and mill spindles - right 3x drill-& mill spindle, 9 stages, driven, fixed and left 3x drill-& mill spindle 9 stages, driven, fixed such as radial 3x drill-& mill spindle with 9 stages, driven, fixed i.D. *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs Djdpfsu Idwbox Aizowd i.D. *

Condition: used, Technical details: Dwjdpfx Aisu Idwnozod number of spindles: 9 Stück weight of the machine ca.: 10,2 t Transfer machine with 9 Drill-& Mill spindles - right 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages - left 2x drill -& mill spindle and 1x thread cutting spindle with 9 stages such as radial 2x drill-& mill spinlde flexible and 1x thread cutting spindle 9 stages, flexible i.D. *

Condition: used, Technical details: turning diameter over bed: 320 mm Dsdpfxou Ixy Do Aizswd turning length: 800 mm centre distance: 800 mm centre height: 150 mm spindle bore of work spindle: 30 mm range of revolution per miute: 35 - 1500 / 16 step U/min range of feed in x - axis: 0,04 - 2,4 / 30 step m/min tailstock quill adjustment:: 125 mm tailstock taper MT: MK2 dimension machine xH: 1,7 x 0,8 x 1,5 m Equipment and other features: -3-jaw chuck Röhm 160mm -chuck guard -protection system WxH: 510x400mm -Multifix tool clamp (4 pieces) -Tip in tailstock -Upper slide swivels +/- 45°, maximum travel = 100mm -Cross slide travel = 300mm feed Pump for coolant device (without feed) *

Condition: used, Year of construction: 1987, Technical details: turning diameter over bed: 500 mm turning diameter over support: 280 mm turning length: 1500 mm centre distance: 1500 mm turning dia. in gap: 730 mm spindle bore of work spindle: 65 mm range of revolution per miute: 25-1250 / 32-1600 / 36-1800 - 18 step U/min feed:: 0,05 - 8,5 mm rapid motion - x-axis: 4 m/min Dwsdpfx Aisu Ixznozod rapid motion - y-axis: 1,26 m/min tailstock quill taper MT: 5 tailstock quill adjustment:: 200 mm total power requirement: ca. 8,2 kW weight of the machine ca.: 2,5 t dimension machine xH: 3,2 x 1,3 x 1,5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (clutch end position switching not functional, manual switch-off necessary) Top slide with 4-fold tool holder Steel plate Ø 705mm with offset threaded holes *

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 400 mm turning diameter over support: 220 mm turning length: 1100 mm centre height: 180 mm spindle passage: Ø 45 mm range of revolution per miute: 31,5 - 1.400 / 12 step U/min range of feed in x - axis: längs: 0,08 - 1,10 m/min range of feed in y - axis: quer: 0,028 - 0,40 m/min tailstock quill taper MT: MK4 tailstock quill adjustment: 200 mm total power requirement: 4,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,5 x 1,1 x 1,4 m Dwedpfx Aeu Ix E Heizjd Equipment: -Three-jaw chuck Ø 250mm manufacturer Forkardt with interchangeable jaws -Multifix steel holder -Cooling water device with pump -chuck guard -chip collecting tray -chip guard Accessories: -chuck spanner -tool holder -2 pieces gears *

Condition: used, Year of construction: 1951, Technical details: Dedpsu Ix Hdsfx Aizswd turning diameter over bed: 400 mm turning diameter over support: 240 mm turning length: 1100 mm centre height: im Bett gemessen: 190 mm spindle passage: 40 mm range of revolution per miute: 37,5 - 950 U/min total power requirement: 3,5 kW tailstock quill taper MT: MK 4 tailstock quill: 180 mm weight of the machine ca.: 1,6 t dimension machine xH: 2,6 x 1,4 x 1,3 m The lathe is equipped with threading device. It is rewired and a new control cabinet is made. Emergency stop switch and chuck protection 3-jaw chuck Ø 250mm rotating tip Tool support quadruple steel holder tool support approx. 30° right/left swiveling 4 Stück Wechselräder Copying device (taper 15° right/left) *

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 315 mm turning diameter over support: 200 mm turning length: 500 mm turning diameter over bed: 315 mm swing diameter over face slide: 200 mm center height measured in bed: 180 mm spindle passage: Ø 32 mm range of revolution per miute: 56...2.800 / nur only 6 step links-rechts U/min range of feed in x - axis: längs: 0,02..0,8 m/min range of feed in y - axis: plan: 0,01..0,4 m/min tailstock quill taper MT: MK 4 tailstock quill adjustment:: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,1x 1,1 x 1,4 m -Workpiece pick-up via collet chuck -travels longitudinal slide= 580mm and cross slide=170mm -incl. tooling device lathe support -incl. change gears -steady rest Ø 100mm -fourfold tool holder The machines functionality is limited ! Dodpfxou Ix Hqj Aizswd 6 speeds are currently selectable! (224/1800 ; 280/2240; 355/2800 rpm.) i.D. *

Condition: used, Year of construction: 2004, Technical details: turning diameter over bed: 610 mm turning dia. over face-slide: 350 mm swing diameter over bed: 610 mm centre distance: 1390 mm control: Fanuc 0i-Mate TC x-axis: plan: ca. 305 mm z-axis: längs: ca. 1350 mm revolution per minute: 22 - 2200 U/min feed:: X + Z-Achse: 5 / 10 m/min. spindle bore: Ø 70 mm tool turret - number of stations: 6 tailstock quill taper MT: MK5 tailstock quill stroke: 150 mm Weight approx.: 2,7 t total power requirement: 15 kW dimension machine xH: 3,7 x 1,7 x 1,7 m dimensions of hydaulic: 630 x 460 x 900 mm other features: -hydr. chuck TONFAU Ø 300mm -hydraulics -Coolant system Dwodpfx Aiou Ix I Ujzed -control panel -double foot switch accessories: -div. mold jaws -div. soft jaws -6 footrests *