Used Platen for sale (548)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control Lsdpfxoyg Nfus Abvjri • Mold sensors: Kistler (p=1/t=0)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 80,649 h, clamping force: 2,500 kN, screw diameter: 50 mm, Hydraulic injection moulding machine manufactured in 2008. This FERROMATIK K- TEC250S features a clamping force of 2500 kN and an injection volume of 441 cm³. It has a screw diameter of 50 mm and a tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the FERROMATIK K- TEC250S machine we have for sale. Contact us for further details. • Injection volume: 441 cm³ • Specific injection pressure: 2268 bar • Tie bar spacing: 630 × 630 mm • Platen size (W × H): 970 × 1035 mm • Pressure cylinder length: 320 mm • Minimum installation height: 345 mm • Maximum installation height: 1195 mm Lrsdpfx Aboymzawevji • Maximum ejector stroke: 200 mm • Centering ring: 160 mm • Core pulls: 2 • Hydraulic/Pneumatic interface: H8

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: Lrodpfx Aeyf Htyjbvoi • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Condition: ready for operation (used), Year of construction: 2015, operating hours: 15,642 h, screw diameter: 45 mm, total height: 2,213 mm, overall weight: 15,750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection moulding machine. Contact us for more information. Additional equipment • Fanuc Robot Machine Benefits Qualitative Machine Benefits • Process data acquisition, mould protection Technical Machine Benefits • Mould height min: 350 mm / mould height max: 745 mm • Main electronic connection: 3/400 v 50hz • Programmable sequence, highly dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Extra Information Standard equipment: Support of the moving mould mounting platen via linear guides/ Ejector short / long stroke/ Interface for external printer (hardcopy)/ Individual axis movement optimization (activeAdjust)/ Four-stage mould closing and four-stage mould opening sequence/ Pump drive power II, increased (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3 phases + N + PE/ Mains connections drive / heating separate/ Data display coloured/ Oil cooler reinforced (cooling water supply up to 35 °C)/ Water connection for mould and machine cooling separate/ Basic version Europe/ Corrosion protection/ Lsdpfxex D Hntj Abvsri Paint finish: Deep black (RAL9005): Machine bed with internals, lower switch cabinet/ Signal white (RAL9003): Clamping unit, injection unit, nozzle guard/ Signal white (RAL9003): Fixed safety devices, upper switch cabinet/ Signal white (RAL9003): Safety doors/ Textured surfaces: Elastic machine bearings/ Digital and wear-free position measuring system (ultrasound/high-resolution rotary encoders for injection, mould and ejector movement)/ Mould connection dimensions type E (according to EUROMAP March '96)/ Centring diameter fixed platen: 160 mm/ Centring diameter moving platen: 160 mm/ Without side ejector plate/ Standard mold installation height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety gate is closed)/ Ejector with position control (p/F+v independently programmable, parallel to mold movement)/ Toggle lever oil lubrication/ Injection unit/ Optional equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for ultra-fine filtering in the bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), can be disconnected via main switch/ Socket IECEE 3Ph / 400V-16A, can be switched off via main switch/ Flashing light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on movable tool plate (programmable)/ 6 pneumatic 5/2-way valves on fixed tool plate (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with non-return valves)/ Manual pressure relief for core pull 1-circuit/ Protective clothing on operator side widened (250 mm)/ Hot runner control 12 zones, integrated (2, 75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force control/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with emptying option/ Holding pressure switchover dependent on hydraulic pressure (with pressure recording)/ Nozzle contact pressure when mold is open (programmable)/

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Machine Benefits Technical Machine Benefits Ljdpfsx D Hnysx Abvjri • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn • Dry cycle time according to euromap 6 (stroke): 427 mm • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Ljdpfx Abeyalmbjvjri Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: ready for operation (used), Year of construction: 2016, operating hours: 37,049 h, clamping force: 4,000 kN, overall weight: 21,000 kg, This Arburg 820 S 4000 - 2100 was manufactured in 2016. It features a clamping force of 4000 kN, a screw diameter of 60-100 mm, and a shot weight up to 1860 g. The machine is equipped with a SEPRO SR AXESS 30 S3 robot and has a hydraulic pump drive power of 55 kW. Ideal for precision in plastic injection molding. Contact us for more information about this machine. Clamping unit • Locking force (max.): 150 kN • Opening force (max.): 100 kN / increased: 800 kN • Opening stroke (max.): 700 mm • Mold height (min.): 350 mm • Distance between platens (max.): 1050–1550 mm • Clear tie bar distance: 820 × 820 mm • Mold mounting platens (W × H): 1171 × 1171 mm • Mold half weight (max.): 4500 kg • Ejector force (max.): 100 kN • Ejector stroke (max.): 250 mmHydraulics / drive / miscellaneous • Hydraulic pump drive power: 55 kW • Installed total power: • 4000-2100: 88.9 kW • 4000-3200: 96.2 kW • Color: Plastic-coated structure (light gray / mint green / rapeseed yellow) • Control cabinets: Safety regulation DIN EN 60204 • Socket combination: 1 Schuko + 1 Cekon • Injection unit power supply: 1 × 16 AInjection unit • Effective screw length (L/D): 23/20/17.5 | 70/80/90 | 23/20/18 • Screw diameter (mm): 60/65/70 | 80/90/100 | 60/65/70 • Theoretical shot volume (max., cm³): 792/1078/1407 | 2513/3462/4240 | 1132/1608/2036 • Shot weight (max., g PS): 293/384/1826 | 1255/1469/1860 | 820/1167/1477 • Injection pressure (max., bar): 2500/2000/1530 | 2500/1500/1200 | 2500/2000/1530 • Injection flow rate (max., cm³/s): 294/362/400 | 812/1030/1250 | 312/396/440 • Injection flow rate with accumulator (max., cm³/s): 354/450/502 | 1188/1552/1964 | 375/475/528 • Back pressure positive/negative (max., bar): 350/50 | 350/50 | 350/50 • Screw circumferential speed (max., m/s): 0.38 | 0.28 | 0.28 • Screw torque (max., Nm): 2057/2247/2247 | 6757/80 | 2057/2247/2247 • Nozzle contact force (max.): 110 kN Ljdpsydpvbsfx Abvsri • Nozzle stroke (max.): 600 mm • Heating zones / heating capacity: 6 × 4500 + 3300 | 6 × 5500 + 4300 • Installed nozzle heating: 1000 W | 1250 WDimensions and weights (base machine) • Clearance length: 490 mm • Electrical connection (fuse protection) motor + heating: 250 A • Electrical connection (fuse protection) motor: 125 A • Electrical connection (fuse protection) heating: 50 / 63 A Additional equipment • SEPRO SR AXESS 30 S3 robot (2008)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 Lredsyfrb Nopfx Abvji • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone

Condition: ready for operation (used), Year of construction: 2001, operating hours: 98,780 h, clamping force: 2,000 kN, overall weight: 12,200 kg, controller manufacturer: ENGEL, controller model: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2000 kN, a mold opening stroke of 700 mm, and a tie-bar distance of 920 x 750 mm. Equipped with dual injection units, screw diameters of 40 mm and 25 mm, and a rotary table control. Consider the opportunity to buy this Engel ES650H/200W-200HL-2F hydraulic injection moulding machine. Contact us for more information about this machine. • Clamping unit • Mold weight (WZ): 1500 kg • Total moving weight: 3000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1250 mm • Ejector stroke: 150 mm • Ejector force: 61 kN • Centering ring diameter A-side: 110 mm • Centering ring diameter B-side: 90 mm • Mold locking system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A-side) • Rotary table control: Yes • Index plate control: Yes • Injection unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle orifice: 15 mm • Pump motor: 30 / 12.3 kW • Injection unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump motor: ~6.8 kW • Machine axes travel • X-axis (injection unit): 500 mm • Y-axis (rotary table / mold carrier): 1000 mm • Z-axis (clamping unit): 1400 mm • Equipment and options (machine-integrated) • SPC / Process control: Yes Ledpfx Abjyf H Nnevsri • Pressure interface: Yes • Second injection barrel: Yes • Mold monitoring: No • Cavity pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition • Well-maintained and serviced Additional equipment • Engel Linear Take-out Robot ERC 23/1-E (included)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 101,500 h, clamping force: 3,000 kN, overall weight: 19,700 kg, Hydraulic injection moulding machine manufactured in 2007. This Engel Victory VC1800/300 P features a clamping force of 3,000 kN and an opening stroke of 900 mm. It includes a robust control system with a 15" TFT touchscreen and a maximum injection pressure of 1,735 bar. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory VC1800/300 P machine we have for sale. Contact us for further details. Identical Engel Victory VC 1800/300P (2008 model) also for sale — same configurations. • Power supply: 3 x 400 V + N + PE / 50 Hz • Control system: ENGEL CC200 A02 (15" TFT touchscreen) • Opening stroke: 900 mm • Maximum platen distance: 1,500 mm • Minimum mould installation height: 600 mm • Ejector stroke: 200 mm • Ejector force: 90 kN • Pump drive power: 37 kW • Injection unit version: M3 • Available screw diameters: 60 / 70 / 80 mm • Screw diameter installed: 70 mm • Maximum swept volume (70 mm): 1,039 cm³ • Maximum screw speed: 226 rpm • Injection rate (70 mm): 385 cm³/s • Specific injection pressure (70 mm): 1,442 bar • Maximum injection pressure (increased): 1,735 bar • Nozzle stroke: 500 mm • Nozzle contact force: 110 kN • Hours: 101,500 h • Maintenance/Service history: • Complete hydraulic hose replacement in 2025 • Motor and planetary gearbox replacement in 2021 • High-pressure cylinder replacement in 2020 • Several cost-intensive main components renewed in recent years Additional equipment Lrodpfx Abeyn Ntzovsi • Robot: ENGEL ERC 64 (included) • Axes travel: X 1,200 mm, Y 1,300 mm, Z 3,600 mm • B-axis rotation: -90° to +270° • Vacuum circuits: 4 • Pneumatic circuits: 8 • Reject/quality conveyor belt • Box transfer for 600 x 400 x 250 mm boxes • GWK temperature control tower (optional)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 68,463 h, screw diameter: 35 mm, This Arburg 470 E 1000-700 was manufactured in 2011. A robust electrical injection moulding machine, it features a closing force of 100 tons and a screw diameter of 25mm. Operating on 400V 3∼, 50Hz with a total connected load of 78kW, it's designed for efficient performance. Consider the opportunity to buy this Arburg 470 E 1000-700 electrical injection moulding machine. Contact us for more information. • Operating voltage: 400 V, 3-phase, 50 Hz • Control voltage: 230 V, 50 Hz; 24 V AC • Motor rated current: 61 A • Heating rated current: 58 A • Total rated current: 119 A • Total connected load: 78 kW • Calibration (year): 2027 • selection unit: yes Lrodpjx D Rndsfx Abvoi • single platen: yes • beam spacing: 470 x 470 • Optional: Geiger Handling

Condition: ready for operation (used), Year of construction: 2017, clamping force: 800 kN, Electrical injection moulding machine manufactured in 2017. This Negri Bossi ELE 80 features a clamping force of 800 kN and a maximum opening stroke of 515 mm. The machine offers a tie bar distance of 420 × 420 mm and a platen size of 595 × 595 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi ELE 80 machine we have for sale. Contact us for further details. • Tie bar distance (H × V): 420 × 420 mm • Platen size (H × V): 595 × 595 mm • Mould height (min–max): 180–515 mm • Max opening stroke: 515 mm • Max daylight: 515 mm + mould height (depending on configuration) • Injection unit options: • Screw diameters: 18 / 25 / 30 / 35 mm • Shot volume: 22–116 cm³ (depending on screw) • Max injection pressure: up to 3000 bar (depending on screw diameter) • Max injection speed: 300 mm/s Lodpfx Abeyn E E Tevjri • Machine category: Fully electric (no hydraulics for main movements)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold Ledpfxoyhbq Ee Abvjri • Cooling: 4 x HB 100

Condition: ready for operation (used), Year of construction: 2012, operating hours: 70,936 h, clamping force: 4,200 kN, screw diameter: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Mold installation height (min): 380 mm • Opening stroke: 1020 mm Lrsdpfxeyhby Ho Abvoi • Daylight (platen distance): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on moving side (AS) + 2 on fixed side (DS) • Shut-off nozzle: 2-fold hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Stroke volume: 1810 ccm • Shot weight (PS): 1647 g • Injection flow (PS): 498 g/s • Plasticizing flow: 106 g/s • Screw L/D: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM Linear robot, built in 2021 • Hot runner control, 12-zone • Mold sensors: Priamus (p=2 / t=0)

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) Lredpfxeyg I Egs Abvji • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Year of construction: 2007, condition: ready for operation (used), Other machine manufactured in 2007. This Barberan PUR-33-L is a continuous wrapping line designed for applying PVC foil, CPL, paper, and veneer on various materials using hot-melt technology. It features a robust one-piece electro-welded steel frame, motorized rubber-coated feed wheels, and a slot die extrusion system for precise glue application. If you are looking to get high-quality wrapping capabilities, consider the Barberan PUR-33-L machine we have for sale. Contact us for further details. Lodpfx Asym U Disbveri • Base Frame: One-piece electro-welded steel frame with high structural rigidity. It is designed to absorb vibrations and maintain pressure roller alignment. • Transport System: Motorized rubber-coated feed wheels with speed controlled via inverter, ensuring precise synchronization between glue application and profile feed. • Pressing / Calendering Zone: Universal supports and multiple pressure rollers with various shapes and hardness levels, suitable for complex profile geometries. • System Type: Slot die extrusion system with adjustable lips. • Working Width: 330 mm. • Glue Application Accuracy: Constant gram-per-square-meter distribution, independent from line speed. Closed system reduces oxidation, prevents premature PUR crosslinking, and minimizes material waste. • Adjustment: Micrometric lip adjustment for precise control of glue film thickness. • Type: 20 kg PUR drum melter with heated platen, where only the top layer is melted to preserve the chemical integrity of the remaining adhesive. • Sealing System: Airtight design with dedicated seals to prevent air/moisture ingress. • Pump: Integrated gear pump providing constant, pulsation-free adhesive flow to application head. • Function: Maintains adhesive working temperature between approximately 120–150 °C during transfer from melter to slot die head. • Length: 4.5 meters. • Technical Features: Internal core made of PTFE (Teflon), high pressure, and PUR-resistant. It includes a uniform electric heating element to prevent cold spots, high-efficiency thermal insulation, an integrated thermocouple, and temperature control via machine PLC.

Year of construction: 2019, condition: ready for operation (used), This DEMAG Systec 210/580-840 was manufactured in 2019. It's a hydraulic injection moulding machine with a clamping force of 210 tons and a power output of 60 kW. It has been used for 31,132 operating hours. Consider the opportunity to buy this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Contact us for more information. • The dosing unit (orange part) is not included. • Integrated socket combination, country-specific, • can be switched off via main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current device • Pneumatic 5/2 valve No. 1 on movable mold clamping plate; • programmable, supplied via central air connection • includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point outside the control cabinet Ljdpfx Aex D Nluobvori • Interface for additional nozzle heating band; socket only • 2-circuit core puller via switching valve on movable mold clamping plate; Q-independent (programmable); • With pilot-operated check valves to prevent core creep • Mold connection dimensions E (similar to Euromap March 96) • With side ejector plate, centering diameter of fixed platen: 160 mm • Centering diameter of movable platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Year of construction: 2005, condition: ready for operation (used), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 was manufactured in 2005. It features a central accumulator for high-speed injection and chromed tie bars. The pump drive power is 22.0 kW, with a mains voltage of 400 V/50 Hz. It includes a color data display with VGA interface, an oil cooler, and electric screw drive. Consider the opportunity to buy this SUMITOMO SHI DEMAG El-Exis S 250/630-1450 hydraulic injection moulding machine. Contact us for more information. Lredpfsx D Rqrsx Abvei • 5x similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mold movement • Chromed tie bars on clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate mains connections for drive and heating • Control: color data display with VGA interface and AT keyboard interface • Injection, holding pressure, and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mold and oil cooling • Compliance: Basic version Europe, according to valid safety regulations • Painting: Bottom anthracite grey RAL 7016; Top blue 571C MD • Elastic machine mounting • Ultrasonic displacement measuring system with digital data transmission for injection, ejector, mold (WZ), and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centering diameter (D=100/125) for fixed mold platen • Mold connection dimensions type E (similar to EUROMAP), without side ejector plate • Standard mold installation height • Safety interlock: mold opening and ejector forward only with closed safety door • Ejector with position control via proportional valve; pressure and velocity independently programmable • Electric screw drive, frequency-controlled

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,000 h, clamping force: 500 kN, screw diameter: 25 mm, injection weight: 46 g, total height: 1,779 mm, overall weight: 4,200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct-drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Includes a granule dryer, industrial robot, conveyor belt, and temperature units. Ideal for high-quality injection moulding processes. Contact us for more information about this machine. Additional equipment • Granule Dryer • Handling System • Conveyor Belt - 1400 mm x 400 mm • Precision Scale • Temperature Units - 2x HB‑Therm Machine Benefits Technical Machine Benefits • Exceptional energy efficiency • Enhanced platen rigidity and mold safety • Fully electric direct-drive system • Ultra-precise direct-drive motors with 0. 1 ms response time • Displacement: 52 cm³ • Spray pressure: 2180 bar • Tool clamping platens: 520 x 570 mm Extra Information Control Unit Advanced control system with NC5+ Automatic mold height and clamping force adjustment Energy-saving routines Lsdpfx Abox D Eccsvori Dimensions Machine Depth 4308 mm

Condition: ready for operation (used), Year of construction: 2013, operating hours: 17,577 h, clamping force: 1,600 kN, total height: 2,060 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 11 Machine Benefits Technical Machine Benefits • Clamping unit: 160 / locking force: 1760 kn / opening stroke max: 495 mm / mould installation height, min: 275 mm / mould installation height, max: 585 mm • Platen distance, max: 1080 mm / mould mounting platens (h x v): 760 x 785 mm / clear column distance (h x v): 520 x 520 mm • Ejector travel: 125 mm / ejector force: 35 kn • Injection unit: 340 / screw diameter: 35 mm / l/d ratio: 20 / injection flow (ps) without accumulator: 288 cm³/s • Metering stroke: 162 mm / nozzle stroke, max: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact pressure: 30 kn • Material hopper capacity: 35 l / injection speed, max. , standard: 300 mm/s / injection speed, max. , increased: 500 mm/s • Net weight without oil filling: 7300 kg Extra Information Electrical & Pneumatic Interfaces: Sockets: 2 x Schuko (1Ph, 230V, 10A)/ 2 x IECEE (3Ph, 400V, 16A) – switched off via main switch/ Additional Schuko socket also listed (same rating)/ Valves: 1 x Pneumatic 5/2 valve on movable platen (programmable)/ 2 x Pneumatic 5/2 valves on stationary platen (programmable)/ I/O: 3 digital inputs / 3 digital outputs (freely programmable)/ Lodsx D Hnmjpfx Abvjri Terminal board outside control cabinet/ Air & Cooling: Central air supply and piping/ Cooling system: open cycle/ Cooling water controller: 4 circuits with temperature indication (max. 10 l/min per circuit)/ Separate water connection for cooling (mould + machine)/ Switch-off for mould cooling (time programmable)/ Machine Mechanical & Motion Features: Clamp and injection unit colours: Jet black (RAL9005): bed, pump station, lower control cabinet/ Signal white (RAL9003): clamp unit, injection unit, guards, covers, safety doors/ Mould platen layout: E-standard (similar to EUROMAP, March 1996)/ No side ejector platen/ Ejector: held in front position against spring-loaded mold ejector/ Standard mold height/ Standard closing speed/ Only active movement when safety guard is closed/ Screw: wear-resistant, nitrided barrel, standard L:D, 35 mm diameter/ Non-return valve: 3-piece ring type/ Control, Programming & Monitoring: Inputs/outputs and clamp sequence: freely programmable/ Switching programs (e.g., dry cycle, startup scrap counter, timer-controlled cooling)/ Injection process: Injection force with max injection speed: 200 mm/s/ Back pressure programmable via 6-point polygon/ Follow-up pressure switch-over based on melt pressure/ Follow-up, back pressure, metering: closed-loop control/ Feed throat temp control: closed-loop, max 90°C ±9°C/ Reduced nozzle sealing force (programmable)/ Clamp force: closed-loop control/ Active mold protection: sensor-based during closing/ Hot runner control: 5 zones integrated (2.75 kW total) Display, Software & Data: Coloured data display PDA (Process Data Acquisition): 100% control with graphical parameter recording/ Overlaid graphs for multiple cycles/ External statistical data export/

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,109 h, screw diameter: 36 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, This FANUC Roboshot S150iA was manufactured in 2015. It's an electrical injection moulding machine with a closing force of 150-180 tons and a screw diameter of 36mm. Weighing 4.4 tons, it operates on a power supply of 200 V∼50/60 Hz or 220 V∼60 Hz. Consider the opportunity to buy this FANUC Roboshot S150iA electrical injection moulding machine. Contact us for more information. • Power supply: 200 V, 50/60 Hz; 220 V, 60 Hz • selection unit: no • beam spacing: 560 x 510 • single platen: yes • Optional: Wittmann Handling Lodpfjx S Slcsx Abveri

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN Lredpfx Aoydnp Hjbvoi • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Year of construction: 2020, condition: ready for operation (used), overall weight: 28,400 kg, This Arburg Allrounder 920H 5000-4600 was manufactured in 2020. A robust plastic processing machine featuring a clamping force of 5000 kN and an injection unit of 4600. It has a significant opening stroke of 900 mm and mold platens size of 1280 x 1280 mm. Consider the opportunity to buy this Arburg Allrounder 920H 5000-4600 plastic processing machine. Contact us for more information about this machine. Additional equipment • The robot + auto line are not included. These PIOVAN accessories are included: Piovan Hot Air Dryer G35 / Piovan Suction Unit PF30 / 3x Piovan Temp Unit THW118-F (+1x brand new unused temperature unit) Machine Benefits Technical Machine Benefits Lredex U Tqrjpfx Abvji • Pump hours in operation: 1769 hours, hours in automatic cycle: 695 hours • Clamping force: 5000 kn / injection unit: 4600 • Opening stroke: 900 mm / distance between bars: 920 x 920 mm / mould height min-max: 400-1050 mm • Size of mold platens: 1280 x 1280 mm / ejector stroke: 250 mm / ejector force: 86 kn Extra Information The machine has been used very little

Condition: ready for operation (used), Year of construction: 2007, clamping force: 5,000 kN, overall weight: 26,400 kg, This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine. • Maximum mold opening force: 150 kN • Enhanced opening force: 100 / 1,000 kN • Opening stroke: up to 900 mm • Mold height: min. 400 – max. 1,050 mm Lrsdpfx Absydnigjvei • Distance between platens: 1,300 – 1,950 mm • Tie-bar spacing (H × V): 920 × 920 mm • Platen size (W × H): 1,280 × 1,280 mm • Movable platen weight (half): max. 8,000 kg • Ejector force: max. 800 kN • Ejector stroke: max. 250 mm Hydraulics / Drive • Hydraulic pump motor power: 75 kW • Dry cycle time (opening stroke 5): 4.5–6.44 s • Installed total power: 96 kW • Color: Structural light gray / mint green / red-yellow • Control cabinet safety standard: DIN EN 60204 • Socket combination: 1 × Schuko, 1 × CEE Injection Unit • Screw diameters: 70 / 80 / 90 mm • Effective screw length (L/D): 23 / 20 / 18 • Maximum shot volume: 1,232 / 1,608 / 2,036 cm³ • Maximum shot weight (PS): 1,125 / 1,469 / 1,860 g • Plasticizing capacity (PS): 185 / 215 / 250 kg/h • Maximum injection pressure: 2,500 / 2,000 / 1,580 bar • Injection rate: • Without accumulator: 290 / 380 / 482 cm³/s • With accumulator: 1,188 / 1,552 / 1,964 cm³/s • Holding pressure: max. 350 / 200 bar • Screw speed: 47 / 54 / 61 rpm • Screw torque: 3,500 Nm • Nozzle contact force: max. 110 kN • Nozzle stroke: max. 675 mm • Installed barrel heating power: 6 × 5,500 + 4,300 W • Installed nozzle heating power: 1,100 W • Oil fill volume: 590 liters • Motor + heating fuse rating: 200 A • Motor fuse: 125125 A • Heating fuse: 63 A

Condition: ready for operation (used), Year of construction: 2004, operating hours: 91,810 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection weight: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2500 kN and a locking force of 2750 kN. The machine includes a Wittmann linear robot and supports a maximum mold weight of 3300 kg. It's equipped with a screw diameter of 60 mm and offers a shot volume of 636 ccm. Consider the opportunity to buy this DEMAG ET250/630-840 Concept hydraulic injection moulding machine. Contact us for more information about this machine. Lodpoyfq Aljfx Abvjri • Locking force: 2750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mold height: 330–830 mm • Opening stroke: 675 mm • Max daylight (distance between platens): 1505 mm • Mold weight capacity: fixed side 1100 kg, moving side 2200 kg (total 3300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centering ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1351 bar • Plasticizing rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle bore: 3 mm • Max dosing stroke: 225 mm • Note: Second injection unit listed with no data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Stroke: Y (vertical) 1600 mm, X 900 mm, Z 2500 mm • Hot runner control: 9 zones • Mold sensing: Kistler pressure (p=1) / temperature (t=0) system • Valve gate control: hydraulic (pneumatic not equipped)