Used Platen for sale (614)

Condition: excellent (used), Year of construction: 2008, Krauss Maffei Injection Moulding Machine KM 300-1000 CX Year of manufacture: 2008 Manufacturer: Krauss Maffei Control system: MC 5 with colour monitor, integrated control panel, and disk drive station Clamping system: fully hydraulic Plasticising unit SP 1000 Screw diameter: 50 mm Non-return valve, open nozzle Nozzle radius: 15 mm, bore: 3 mm Clamping unit Clamping force: 3000 kN Opening force: 169 kN Platen dimensions (H × V): 995 × 1050 mm Tie bar spacing: 630 × 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight (max. mould open width): 1150 mm Ejector stroke: 200 mm Ejector force (forward/backward): 58 / 28 kN Injection unit Screw diameter: 50 mm L/D ratio: 22.0 Injection pressure: 2304 bar Chsdpsw U Rcdofx Abrod Injection volume: 432 cm³ Shot weight (PS): 393 g Injection speed: 170 mm/s Injection flow rate: 334 cm³/s Screw speed (standard): 370 rpm Plasticising rate (at standard screw speed): 54.3 g/s Electro-hydraulic equipment Pump motor power: 45 kW Heater capacity: 18.7 kW Number of heating zones: 5 Dry cycle time / stroke per Euromap 6: 2.8 s / 441 mm Oil tank capacity: 720 l Dimensions and weight Net weight (including control cabinet): 12.5 t Dimensions (L × W × H): 6.11 × 2.17 × 2.25 m

Condition: refurbished (used), functionality: fully functional, Refurbished, four-piston hydraulic platen press of Italian manufacture. Branded veneer press for easy veneering of wood. Dimensions of veneer sheets: 2500 x 1300 mm Pressure at full area: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic pistons: 4 MYLAR Teflon film on the platens Preparation for heating the platens with water Option to install a hot water boiler Price: 6,630 EUR excluding VAT The condition after refurbishment and the machine's readiness for delivery must be verified in advance! In stock in Telnice near Brno, Czech Republic. Testing, demonstration of the machine, and operator training are standard services. Chsdpeyi U Rnefx Abrjd

Year of construction: 2025, condition: new, Cost-effective single-column, microprocessor-controlled tensile testing machine for tensile, compression and bending tests up to 5kN Comfortable Windows software for universal test procedures, simple tests can also be performed without a PC. Made in Germany Basic equipment: • Machine with sensor (optionally between 50N and 5kN) • Accuracy class 0.5 • Windows based software • Warranty 2 years Optionally available: • Extensive gripping tools (mechanical, pneumatic and hydraulic), for example: compression platens Screw and wedge grip bending fixtures Chjdsd H S Rrspfx Abrsd Special designs according to customer specifications • extensometer / strain gauge: • Temperature and climatic chamber • Windows software PM-Soft-Smart for universal use, freely programmable • Commissioning into operation and training

Condition: new, Year of construction: 2026, functionality: fully functional, Our honeycomb heater plates are manufactured and assembled to Clako’s own unique design. 1 Zone, 2 Zone + 4 Zone Heater Plates are manufactured by our own engineer to fit your Cylinder, Platen, Saroglia and Clamshell machines. Strong, durable & available in high grade hardened steel or lightweight toughened aluminium to suits your needs. All of our honeycomb plates are machined to true flatness. Dies (cliches) secure to our plates using low height toggles. Chedeyznu Sepfx Abred Contact our team for details and price.

Condition: like new (used), Year of construction: 2019, clamping force: 2,200 kN, Equipment: documentation/manual, Fanuc FANUC ROBOSHOT Alpha S220iA (2019) _FANUC Roboshot α-S220iA – Equipment List_ _Basic Technical Specifications_ 1. Clamping force: 2200 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 1900 bar 4. Min./Max. mold height: 250–750 mm (extended) 5. Clamping stroke: 550 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Locating ring: Ø 160 mm 8. Ejector stroke: 150 mm 9. Screw diameter: 48 mm (318 cm³) 10. Screw/barrel: W/C (hardened, high wear & corrosion resistance, up to 350 °C, 30% GF) 11. Nozzle: Standard open R19D4 _Control & Software (FANUC 31i-B CNC)_ 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function Chjdpfx Aozkttcebrjd 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function _Standard Machine Equipment_ 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian) _Clamping Unit Specifications_ 1. Mechanism: Double toggle 2. Clamping force: 2200 kN / 220 tonf 3. Die height (single platen): 250–650 mm _(opt. 250–750 mm)_ 4. Clamping stroke: 550 mm 5. Locating ring: Ø 160 mm 6. Tie bar spacing (H×V): 650 × 650 mm 7. Platen size (H×V): 900 × 900 mm 8. Min. mould size (H×V): 375 × 375 mm 9. Ejector stroke: 150 mm 10. Max. ejector force: 35 kN / 3.5 tonf

Condition: good (used), Year of construction: 1999, _Netstal Synergy 1000-460_ Clamping force: 100 t Year of manufacture: 2000 Control system: SYCAP / DSP II Screw diameter: 45 mm Screw type: PMMA Min. mold height: 250 mm Max. mold height: 550 mm Max. opening stroke: 400 mm Ejector stroke: 120 mm Tie-bar spacing (H): 460 mm Tie-bar spacing (V): 460 mm Platen size (W × H): 660 × 662 mm Cjdpfozu R I Eox Abrshd Needle shut-off: No

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Chodpszvc N Rsfx Abrsd Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: like new (used), functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, operating speed: 50 mm/s, table width: 1,300 mm, table length: 4,200 mm, ram plate width: 1,300 mm, ram plate length: 4,200 mm, distance table to ram: 300 mm, total length: 14,090 mm, total width: 2,600 mm, total height: 2,380 mm, overall weight: 13,000 kg, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, The QIULIN BY624×14/20 industrial hydraulic press is designed for pressing and gluing flat components, veneer pressing, and the production of furniture and door elements. It features a single-platen design with two heating plates. The heating is electric, using thermal oil, with separate temperature control for the upper and lower plates. TECHNICAL SPECIFICATIONS – CATALOG DATA: – Brand: QIULIN – Model: BY624×14/20 – Country of origin: China Chedpez Ix Auefx Abrod – Type: hot hydraulic press – Pressing force: 2000 kN, 200-ton class – Number of working platens: 1 – Number of heating plates: 2 – Length of working plates: 4200 mm – Width of working plates: 1300 mm – Plate thickness: 52 mm – Maximum press opening: 300 mm – Unit pressure: 3.7 kgf/cm², approximately 0.36 MPa – Working temperature: from ambient temperature to 120°C – Total installed power: 79.35 kW – Plate closing speed: 50 mm/s – Heating: electric with thermal oil – Separate temperature adjustment for both plates – Automatic plate opening – Semi-automatic operation EQUIPMENT VISIBLE IN THE PHOTOS: – Robust frame construction – Hydraulic cylinder assembly – Hydraulic power unit – Separate control panel – Conveyor belt and table for material feeding and removal CATALOG DIMENSIONS OF THE UNIT: – Length: 14,090 mm – Width: 2600 mm – Height: 2380 mm – Weight: approximately 13,000 kg Used machine, as shown in the photos. Paid transport can be arranged. Please contact us for details. JBS Woodworking Machinery WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,400 mm, Complete with all assemblies required for installation and commissioning x = 7 m y = 1.6 m z = 1.4 m (800 mm + quill = 600 mm) General overhaul in 2007, year of manufacture 1991 Rapid traverse: 12,000 mm/min; w-axis: 6,000 mm/min Fitted with new Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, and new control cabinets. ECOCUT 1 was only operated for a few hours thereafter. TDV 2 rotary table, max. workpiece weight 6 t / clamping area 1,000 x 1,000 mm TDV 3 rotary table, max. workpiece weight 12 t / clamping area 1,250 x 1,600 mm Chsdpfx Aboz Dunlorjd Accessories: 2 right-angle milling heads / chain-type automatic tool changer / platen table / full enclosure / Knoll hopper feeding system / extraction unit / coolant system with belt filter. Supplied with all BWF fixtures required for installing the machine bed and clamping plate.

Condition: like new (used), Sanding belt height: 200 mm Csdpfx Abjzxyfnjrohd Mechanical oscillation of the sanding belt Raising/lowering of the sanding unit controlled from the control panel Main motor power: 2.5 kW Possibility of sanding using a platen or flat surface Adjustable table angle Capability to sand curved elements 380 V Year: 1998

Condition: ready for operation (used), Year of construction: 2001, operating hours: 26,000 h, clamping force: 1,250 kN, total width: 1,510 mm, total height: 2,190 mm, overall weight: 6,500 kg, product length (max.): 4,480 mm, Hydraulic injection moulding machine manufactured in 2001. This Krauss Maffei 125-520 C1 features a clamping force of 125 T and a screw diameter of 45 mm. It has a shot volume of 275 cm³ and a platen size of 745 x 770 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 125-520 C1 machine we have for sale. Contact us for further details. Cjdpfszk D Nujx Abrehd • Screw diameter: 45.0 mm • Tie Bar spacing: 470 x 470 mm • Shot volume: 275.0 cm3 • 6 heating zones • Hydraulic core • Interface: Euromap 12 robot interface • Outer length: 745 mm • Outer width: 770 mm

Condition: ready for operation (used), Year of construction: 2002, clamping force: 40,000 kN, screw diameter: 135 mm, injection weight: 7,837 g, controller manufacturer: KRAUSS MAFFEI, Hydraulic injection moulding machine manufactured in 2002. This Krauss Maffei 4000-24500 MC features a clamping force of 40,000 kN and an injection volume of 10,735 cm³. The machine is equipped with a screw diameter of 135 mm and a maximum opening width of 4,200 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 4000-24500 MC machine we have for sale. Contact us for further details. KraussMaffei 4000-24500 MC • Clamping Force: 40,000 kN • Injection Volume: 10,735 cm³ • Shot Weight (PS): 7,837 g • Injection Pressure: 2,276 bar • Screw Diameter: 135 mm • Screw L/D Ratio: 23 • Nozzle Radius: 25 mm • Nozzle Shut-Off: Hydraulic • Nozzle Immersion Depth: 40 mm • Platen Size (H × V): 3,315 × 2,920 mm • Daylight Opening (H × V): 2,240 × 1,800 mm • Minimum Opening Stroke: 2,200 mm • Mold Installation Height: 1,100–2,000 mm • Maximum Opening Width: 4,200 mm • Centering Ring (Fixed Platen): 315 mm • Centering Ring (Moving Platen): 315 mm • Quick Mold Clamping System: QMC 101.450 Codpfx Abezk E Thjrjhd • Hot Runner Control Zones: 48 • Pneumatic Cascade Control Circuits: 10 • Hydraulic Cascade Control Circuits: 12 • Core Pull Circuits (Fixed Platen): 3 • Core Pull Circuits (Moving Platen): 4 • Cooling Circuits (Fixed Platen): 18 • Cooling Circuits (Moving Platen): 18 • Temperature Control Units: 36 • Supply Voltage: 400 V • Power Supply: 3-Phase • Frequency: 50 Hz • Motor Current: 622 A • Heater Current: 583 A • Motor Fuse: 630 A • Heater Fuse: 630 A

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating pressure: 280 bar, Rubber injection molding machine in very good condition, manufactured in 2020. Detailed Technical Data: Clamping Unit: Clamping force: 4000 kN Min. mold height: 100 mm Mold opening stroke: 750 mm Max. daylight between heating plates: 850 mm Design: vertical Closing direction: from the top Heating Platens: Platen size: 800 x 806 mm Heating power: 2 x 14 kW Injection Unit: Shot volume: 4000 cm³ Max. injection pressure: 2000 bar Screw diameter: 60 mm Chodpfoz E N Ayjx Abrod Screw length: 10 D Max. screw speed: 0-180 rpm Injection direction: from the bottom Hydraulic System: Variable pump and proportional valves for pressure and flow Hydraulic manifold for stroke control with shift valves Reservoir capacity: 250 l Operating pressure: 280 bar Electrical Equipment: The design of the electrical equipment complies with DIN/VDE standards 0100, 0113 Electrical cabinet protection IP 54 according to DIN 40050 Connected voltage: 3 x 400 V + N + PE Frequency: 50 Hz Connected load: 77 kW Motor capacity: 45 kW Rated heating power: 2 x 14 kW Control voltage: 24 V DC Permissible temperatures: 0 - 40 °C

Condition: used, Year of construction: 2006, CLAMPING UNIT Clamping force: 800 kN Locking force: 800 kN Distance between tie bars: 420 x 420 mm Max. opening stroke: 450 mm Min. mould height: 250 mm (200 / 175 mm with ZE 214) Max. distance between platens: 700 mm (750 / 800 mm with WA 211) Platen size (H x V): 590 x 600 mm Max. mould weight: 700 kg Max. mould weight on moving platen: 450 kg HYDRAULIC EJECTOR Ejector stroke: 150 mm Ejector force: 41.2 kN Ejector retraction force: 14.8 kN INJECTION UNIT (120) Screw diameter: 22 mm Codpfx Ajz D U Skobrohd L/D ratio: 20 Injection pressure: 2591 bar Stroke volume: 41.8 cm³ Shot weight (PS): 37 g Max. dosing stroke: 110 mm Max. nozzle stroke: 200 mm Nozzle penetration depth: 40 mm Nozzle contact force: 60 kN Barrel heating power: 5.1 kW Hopper capacity: 35 l GENERAL Oil tank capacity: 140 l Pump motor: 5.5 / 7.5 kW Total installed power: 10.6 / 12.6 kW Dry cycle time (EUROMAP 6a): 2.01 s – 196 mm / 1.82 s – 196 mm Net weight (without oil): 2550 kg (2650 kg with full cladding) Dimensions (L x W x H): 3.4 x 1.2 x 2.0 m (3.6 x 1.2 x 2.0 m with full cladding) Noise level (idle / full load): 56 / 71 dB(A)

Condition: excellent (used), Year of construction: 2012, operating hours: 43,000 h, Arburg 470-1500-400 injection molding machine, manufactured in 2012, in very good technical and visual condition, fully operational. Used for processing PP. Injection unit: Screw diameter: 40 mm Injection volume: 184 g Injection pressure: 2000 bar Clamping unit: Clamping force: 150 tons Distance between tie bars: 470x470 mm Csdpfx Ajz Rkcyjbrjhd Platen size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Very good technical condition Euromap 12 Robot interface 1x hydraulic core 1x air ejector Hardened injection unit - bimetal

Year of construction: 2001, condition: ready for operation (used), Biesse Rover 22 CNC machining centre Year of manufacture 2001 SN 07498 Working range 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vacuum cup holders 4 pneumatic bakelite bars for lifting the platen Vertical electrospindle 7,5 kW with automatic tool change, ISO 30 taper Automatic tool change 7 positions on the working head Csdpfxeggxiho Abrehd Drilling head with 20 spindles arranged as follows: 7 vertical in X-axis 7 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Grooving saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical specifications subject to change

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Chjdpjt H Nhhofx Abrjd Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 Chodeud H Dmjpfx Abrjd ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, TIGER TM 6B HYDRAULIC HOT PRESS – 3000 × 1300 MM – 90 TONS Professional industrial woodworking machine, ideal for carpentry workshops, furniture manufacturers, and companies specializing in wood-based panel production. The machine is equipped with large 3000 × 1300 mm working platens, a hot water heating system, and 6 hydraulic cylinders, providing a declared total pressing force of 90 tons. Particularly suitable for veneering, gluing, laminating, and pressing wooden panels and wood-based materials. Main Features and Technical Specifications Manufacturer: TIGER Model: TM 6B Machine type: Hydraulic hot press Useful platen dimensions: 3000 × 1300 mm Total pressing force: 90 tons Number of hydraulic cylinders: 6 Heating system: Hot water Heating connection: Prepared for connection to an external heating system Heavy-duty industrial construction Hydraulic platen movement system Guide columns for platen movement Front control panel Chodpfx Ajxvy Siobrod Pressure gauge for monitoring hydraulic pressure Safety system with front emergency stop cable Applications Veneering of wooden panels Gluing of laminates and surface coverings Pressing of MDF, chipboard, and plywood panels Manufacturing of furniture and furnishing components Industrial hot gluing and bonding applications

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Cedpfx Abeza E Rmsrshd

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1800kN, screw stroke: 200mm, speed: 300rpm, L/D: 20, nozzle stroke: 400mm, nozzle contact force: 50kN, hopper volume: 80l, tie-bar spacing: 520mm/520mm, platen dimensions X/Y: 760mm/760mm, mold installation height range: 250mm-600mm. Machine dimensions X/Y/Z: 6200mm/1700mm/2750mm, weight: approx. 12000kg, operating hours (Nov. 2025): 27271h. Including handling and protective enclosure. Documentation available. An on-site inspection is possible. Chodpfx Aoy N Uwcobrod

Year of construction: 2000, condition: ready for operation (used), Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Chodpfjzcyqtsx Abrjd

Year of construction: 2002, condition: ready for operation (used), Clamping force: 1600kN, tie bar spacing: 570x520mm, platen dimensions: 810x805mm, max. mould diameter: 804mm, rotary table diameter: 735mm, min. installation height: 300mm, opening stroke: 650mm, opening force: 84kN, tie bar diameter: 80mm, max. daylight opening: 950mm, ejector force: 41.2kN, ejector stroke: 200mm, oil tank volume: 400l, standard drive power: 37kW, hydraulic operating pressure: 240bar, control system: Battenfeld Unilog B4, weight: 7.8t. An on-site inspection is possible. Chsdey T Sdzspfx Abrod

Year of construction: 2016, condition: ready for operation (used), An Arburg injection molding machine with integrated rotary table is available. Connected load: 61kW, clamping force: 500kN, opening force: 40kN, opening stroke: 250mm, max. mold installation height: 270mm, platen distance: 520mm, rotary table diameter: 900mm, rotation angle: 180°, max. table load: 240kg, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 3250mm/2000mm/2600mm, weight: approx. 3200kg, operating hours: 6244h. Documentation available. An on-site inspection is possible. Codpfx Absxrf Nlerohd

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Codpfx Ajyddy Iobrehd