Used Plunge Router for sale (613)

Condition: used, Industrial Ethernet Switch, Network Switch, Lan Switch, Rail Switch, Router, Ethernet Security Router -Manufacturer: NetModule, WLRouter type NB1600-UW with 2 antennas -Antennas: WTG14, 114116 DM1 / WTG14, 114118 DM3 Dsdpeh Sza Defx Adajcp -Total dimensions: 340/200/H135 mm -Weight: 1.1 kg

Condition: used, machine/vehicle number: 008112, X axis working area: 3390 mm Y axis working area: 1535 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Total number of drilling spindles: 21 Djdpfx Adsw Idgvjaocp Total number of tool changer positions: 14

Condition: ready for operation (used), Technical characteristics Router-tenoner equipped with tenoning carriage, work table extension and support bar Working table dimensions : 1100 x 700 mm Dodpfjk Rtg Nex Adascp Max. tool diameter : 300 mm Router spindle diameter : 30, 40 and 50 mm Spindle vertical travel : 220 mm Motor : 7,5 kW Rotation speed: 2900, 4400, 6000 and 8000 rpm Machine with a specific protection housing for both uses (shaping and tenoning) Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7,5 Kw Overall dimensions Weight: 740 Kg

Condition: used, 110067-4200, HaBa, screwdriver plunger Dedpfx Adsur Spxjaecp Model: 110067-4200 Condition: Used

Condition: used, used, good condition Make Frommia Type FS60 Dcodovwf Tfspfx Adajp GS tested Motor 3.2 kW Collet holder 6, 8, 12 Engine 2 speeds 12,000

Condition: used, Year of construction: 2005, operating hours: 6,650 h, functionality: fully functional, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 20 m/min, nominal power (apparent): 25 kVA, controller manufacturer: Bosh Rexroth, workpiece height (max.): 290 mm, workpiece weight (max.): 500 kg, table width: 1,300 mm, table length: 4,000 mm, rotational speed (min.): 1,200 rpm, rotational speed (max.): 24,000 rpm, overall weight: 5,500 kg, spindle speed (min.): 1,200 rpm, spindle motor power: 10,000 W, spindle nose: HSK63F, number of spindles: 1, number of slots in tool magazine: 15, tool length: 240 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, ArtisX6 BRIEF DESCRIPTION. 1 10 kW working electrospindle; constant power in the range of 12,000 to. 24,000 1/min; working range: 1200–24,0001/min. Tool socket: HSK63F. Axis working ranges: X = 4600 mm, Y = 1,550 mm, Z = 400 mm, B axis = 180°, C axis= 360° Axis approach speeds: in the X/Y plane = 85 m/min; Z = 20 m/min Gateway: 290 mm Dsdpfx Aswh Aidedaocp 1 automatic disc tool magazine, 15-position. Max. tool length: 240mm, max. tool weight: 6kg L-shaped drilling unit, power 2.2 kW, spindle speed 4500 1/min, spacing 32 mm Machine table: wooden (high-quality waterproof plywood). Dimensions: 4000 x 1300 mm 2 x 4 pneumatically extendable base pins (fi 25 mm, stroke 115 mm). Tool set: yes (including some never used) Table division into two stations for alternating work 1 vacuum pump with a capacity of 250 m3/h and a surge tank with a capacity of 500 l Machine safety (EU standard): BUMPER bumper system (without the use of mats, photocells, etc.) Bosch Rexroth PNC control, BTV 16 industrial PC computer, Pentium III processor, RAM 256 MB, HD 10 GB, network card Profibus SERCOS drive control system Data input: USB-Stick, local network Operating system: Windows2000. ProEmbSys Touch screen CAD/CAM software: Alpha/CAM Movable control panel with manual control panel Remote diagnostics Interpolation: 5 linear, 2 ½ D circular Connected power: approx. 25 kVA Central lubrication Weight: 5.5 t Machine in very good condition, 100% efficient. Storage location: northern Poland

Condition: new, Year of construction: 2022, overall weight: 1,100 kg, total length: 1,330 mm, total width: 1,090 mm, total height: 780 mm, pressure: 600 bar, water consumption per time unit: 43 l/min, water pressure: 600 bar, Equipment: documentation/manual, Sugino high pressure plunger pump not Uraca , Hammelmann , Woma Sugino high pressure plunger pump Type JPGP-66046 Model JCP170PS-140 D26 Water pressure 60 MPa Water pressure 600 bar Flow rate 43 L/min Weight 1100kg Dedpfx Aer A Dm Ijdaecp The set includes a set of gaskets and consumables for the pump

Condition: used, machine/vehicle number: 008033, X axis working area: 5200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 19 Total number of tool changer positions: 26 Dcedowvq Hmspfx Adasp

Condition: used, machine/vehicle number: 007929, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Dcodpfx Adowgaz Usajp Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 007916, X axis working area: 6360 mm Y axis working area: 1680 mm Working Table: Pod and Rail Dcodewfxkxopfx Adajp Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 007917, X axis working area: 5020 mm Y axis working area: 1680 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Dcjdewfxkropfx Adasp Total number of tool changer positions: 36

Condition: used, machine/vehicle number: 007980, X axis working area: 2050 mm Dcsdpfxowml Nks Adajp Main Electrospindle power: 11 KW Number of controlled axes: 5 axes

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 0-250-05-2654, travel distance X-axis: 3,950 mm, travel distance Y-axis: 1,943 mm, travel distance Z-axis: 400 mm, controller model: HOMATIC-2000 IPC, TECHNICAL DETAILS Travel Paths X-axis: 3,950 mm Y-axis: 1,943 mm Z-axis: 400 mm Vertical Drilling Unit X-Direction Drill spindles: 16 Z-axis stroke: 60 mm Drilling depth: max. 38 mm Rotation direction: right/left Speed: 1,500 - 5,900 rpm Drive: 1.5 kW Chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm (15 spindles), 1 spindle up to 25 mm, max. 35 mm (1 reinforced spindle) Spindle pitch: 32 mm (15 spindles) Spindle type: individually controllable Extraction: central Vertical Drilling Unit Y-Direction Drill spindles: 15 Z-axis stroke: 60 mm Drive: 1.5 kW Rotation direction: right/left Speed: 1,500 - 5,900 rpm Chuck: d= 10 mm Drilling depth: max. 38 mm Total drill length: 70 mm Drill diameter: max. 20 mm, 1 spindle up to 25 mm Spindle pitch: 32 mm (15 spindles) Spindle type: individually controllable Arrangement: Y-direction Horizontal Drilling Unit X-Direction Dcjdpoxtng Nsfx Adajp Drill spindles: 4 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: left Speed: 4,800 rpm Chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindles: individually controllable Horizontal Drilling Unit Y-Direction Drill spindles: 2 Drilling depth: max. 38 mm Drilling height Z-direction: 38 mm Rotation direction: right Speed: 4,800 rpm Chuck: d= 10 mm Total drill length: 70 mm Drill diameter: max. 20 mm Spindle type: individually controllable Milling Motor Motor power: 7.5/10 kW (S1/S6 operation) Speed range (stepless): 750 - 18,000 rpm Cooling: liquid circulation cooling Bearings: hybrid bearings (ceramic) Extraction: central Tool Changer Magazine Magazine slots: 30 tool positions Tool weight: max. 5 kg Tool change time: approx. 8 - 10 seconds MACHINE DETAILS Control: HOMATIC-2000 IPC EQUIPMENT Workpiece support system 1,500 mm Workpiece console K-table 1,500 mm Gantry extension Y-direction 120 mm Compressed air manifold with quick couplings Extraction hood for additional top router motor Top router 5 kW with hydraulic quick-clamping system Protective fence on the left with door Safety tread mat 3,250 mm Control cabinet on the left

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 117 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm Dodpfx Aoxukrqjdajcp max. diameter - Rolling tools 135 mm min. dia. 2 mm max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: good (used), Year of construction: 2010, operating hours: 40,000 h, functionality: fully functional, pressing force: 88 t, filling opening width: 990 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale weight: 700 kg, overall weight: 33,000 kg, oil tank capacity: 2,000 l, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 FU Year of construction 2010 Operating hours approx. 40.000 hours, as of July 2025 Main press force 880 kN Specific pressing force 107 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 990 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW, frequency-controlled Connected load 105 kW Total current consumption 200 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 500 up to 700 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 14,000 x 23,000 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2010 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 13,905 mm Length goose neck 3,732 mm Grade 30° Nominal width 1,800 mm Effecting width 1,641 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 12,200 x 3,000 x 1,500 (l x w x h) Scope of delivery: The conveyor belt (without steel podium and maintenance platform), baling press, bale chute and wire drawing stations are for sale, without wire. The plant will remain in operation until March 2026, when it will be replaced by a new press line. Djdpfexr N Tbex Adaecp Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2009, Weight 10 kg Year ca. 2009 Dodpjrl Ucwsfx Adaocp x

Condition: excellent (used), Year of construction: 2011, grinding diameter 250 mm grinding length 650 mm Dedexvdrtjpfx Adajcp centre height 125 mm total power requirement 13 kW weight of the machine ca. 3500 t STUDER (CH) High Precision Electrohydraulic Universal Cylindrical Grinding Machine Model S 30-1 Year 2011 19-39xx Height of centers / Grinding Ø 125 / 250 mm Center distance / Grinding length Z-axis 700 / 650 mm Workpiece weight between centers (no steady) max. 130 kg Table speeds 50 – 5000 mm/min Table way automatic, min. 1,5 mm Table reverse delay 0 – 6 s Table swivable ° Cross way X-axis 315 mm Rapid infeed way 60 mm Feeds 0,012 – 6 mm/min Spar-out time 0 – 6 s Universal Turret Wheelhead Swivable, manual B-axis 0 – 180 ° Grinding wheel dimension : bore x width x Æ 127 x 63 x 400 mm Cutting speed max. 35 m/s Internal Grinding device for spindle Ø 0 mm Workhead with hydrodynamic bearing Fitting taper / spindle bore MK 5 / 30 mm Speeds 60 / 175 / 270 / 600 U/min Spindle drive 5,5 kW Total electric load approx.. 13 kW - 400 V – 50 Hz Weight approx. 3.500 kg Accessories / Special Features: • Electrohydraulic conventional control and drives with a large variablilty and high und high resolution. • MAGNESCALE 2 axis digital read out for Z- and X- axis (linear and diameter display) • Preinstalled automatic cycles for plunge-in grinding, traverse grinding, internal grinding with roughing, finishing, fine-finishing, spark-out (also prepared for use of structure sound sensor and gauge control) • Turret wheelhead with manual B-axis 0-180° with cylindrical grinding spindle left, 5,5 kW and internal grinding spindle with oilmist-lubrication Ø 0 mm, 40.000 rpm, 1,5 kW • Workhead, hydrodynamic bearing, swivable 90°, sine ruler, aircushion • Precision tailstock with fine setting to correct for cylindricity • Machine base made of mineral catsting GRANITAN S3 for high excellent dimensional accuracy, themal stability and dampening characteristics. • Adjustable Dresser mounted on tailstock, hinged dresser for table mount, swivable dresser for table mount • Collet device with many SCHAUBLIN high precision collets Ø 1 – 25 mm • Wide range of accessories as 2 grinding wheel flanges, various internal grinding mandrels, 2 pieces face plates, balancing arbor, var. centers and mandrels, MK adapters, var. sleeves, var. covers, auxiliary pulley, large bandfilter coolant unit, manuals, etc. Condition : excellent, 7.515 hours, universal machine for all sorts of grinding tasks ! Video : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, before loading

Condition: used, Year of construction: 2008, total height: 1,450 mm, total length: 1,750 mm, total width: 1,500 mm, Empty weight: 750 kg Price: On request Dcedpfxowp D T Te Adaep - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: 108/1008-3 - Main motor power [kW]: 4 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Year of construction: 2017, Nordson Durablue 4F hotmelt glue unit suitable for up to 6 hose connections. This unit is equipped with a gear pump, unlike a (double-acting) plunger pump, this has no so-called dead stroke. Dcjdpfevupz Iox Adasp This makes the unit very suitable for constant glue assignments where an even glue dosage is important. The glue unit has been completely cleaned internally and externally by us, tested and is fully functional.

Condition: good (used), Crosscut saw, pull saw, miter saw, plunge saw -Remark: Unit made of slats/blinds production, without control -Saw blade: Ø 188 mm Djdep Dydqopfx Adascp -Individual components: see photos -Dimensions: 1390/620/H1130 mm -Weight: 576 kg

Condition: good (used), Year of construction: 2002, Robust Tilting Spindle Moulder T 26, tiltable from -45 to +45 degrees with 2-axis position control Duocontrol Tilting spindle moulder in excellent specification A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake Forward/reverse operation Tilting angle electrically adjustable from -45 to +45 degrees Height adjustment max. 150mm, electric adjustment When adjusting the height, the correction factor for the tilting angle is shown in the upper display, which can then be set on the stop, allowing settings according to drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of height and fence Fence with lifting device can be swung away (for curved milling work) Table opening adjustable via eccentric table rings, electric adjustment Table extension on right and left with pull-out workpiece support Support can be extended by up to 700mm Table length approx. 2400mm Hinged fence for plunge routing Original Martin aluminium fence jaws with two bridges Aigner Centrex workpiece pressure device 3-roller power feed HolzHer 1117, with 8 speeds, reversible, new rollers Power feed socket, switchable from the control panel Extraction port 2 x 120mm Compressed air connection 6bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Operating instructions CE marking Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. Dcedpfxsvv H T Re Adaep The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier."

Condition: used, Year of construction: 1998, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm 1 GUBISCH – CENTROMAT CW 2 ----- Manufacturer description: ----- For window and door production, with 50 mm spindle diameter in longitudinal profiling. With the following processing stations and options: - Slotting machine on one side for straight and angled connections Milling machine for longitudinal profiling - Rebating operation with synchronous milling unit and automatic plunge. Pivoting frame support up to 650 mm - Central control 1.0 cross-cut saw automatically plunges from above ----- Motor power, including motor brake: 3.0 kW Spindle speed: 2,800 rpm. Cutting circle diameter: 350 mm diameter Spindle diameter: 30 mm diameter Clamping flange, 1 driver 6 mm diameter TK 42, 120 mm diameter Pneumatic vertical stroke: 100 mm Pneumatic horizontal stroke: 160 mm against 2 manually adjustable 6-way turret stops Chip extraction hood with extraction nozzle 100 mm diameter 2.0 slot unit ----- Motor power, including motor brake: 9.2 kW Spindle speed: 3,800 rpm Flight circle diameter: 320 mm diameter Spindle diameter: 50 mm diameter Usable spindle length: 320 mm Pneumatic vertical stroke fixed: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with extraction nozzle: 160 mm diameter 3.0 Slotting table ----- Table height above floor 920 mm Feed for 4 speeds freely adjustable: - 1. Milling, slanting window and typing speed can be set in the table (approx. 7 m/min.) - 2. Sawing speed approx. 7 m/min. (can be set on the device) - 3. Transfer speed approx. 10 m/min. (can be set on the device) - 4. Return speed/without processing approx. 25 m/min. (can be set on the device) - Motor power, including motor brake 0.37 kW Workpiece clamping pneumatic Pendulum pressure shoes Workpiece clamping pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter wood device Counter wood changer with 2-way automatic change and then with manual. Rotation of 180 degrees, 2 further counters possible, which then also counter in automatic mode 3.2 Length stop ----- - Stop system with 3 scales for - a) outside frame - b) outside sash upright - c) outside sash crosswise Adjustment manually Dcedpfew I Eawjx Adasp - Length with attachable extension 3000 mm - for sloped windows, pivotable +/- 60 degrees 3.3 Angle transfer - automatic via vertically clocked feed roller in the milling feed 4.0 Milling machine For longitudinal profiling and rebating of windows/doors with the following units: ----- 4.1 First profile milling unit ----- - Counter-rotation - Synchronous rotation with automatic plunge can be used for rebating - Motor power including motor brake: 9.2 kW - Spindle speed: 6000 rpm. - Cutting circle diameter: 240 mm max. - Spindles adjustable for zero diameter 140 mm max. - of tools 112 mm min. - Zero height: 10 mm - Spindle diameter: 50 mm diameter - Spindle usable length: 320 mm - Vertical stroke pneumatically fixed, - suitable for 4 tool sets of 80 mm each, 3 x 80 mm - Horizontal stroke pneumatic: 80 mm - Chip extraction with extraction nozzle diameter 140 mm 4...

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Dcodpfexddvnjx Adaep Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.

Condition: used, This listing is for the Thermo Scientific Finnpipette F1 Pipette 8 Channel The unit is in full working condition and is ready for immediate use The Thermo Scientific Finnpipette F1 manual pipettes designed for precision, ergonomics, and ease of use in laboratory settings. Available here in a multichannel configurations, the Finnpipette F1 caters to a wide range of liquid handling needs. Key Features Ergonomic Design: Lightweight handle with low plunger and tip attachment forces to reduce the risk of repetitive strain injuries (RSI). Silent Volume Adjustment: Features a silent and lighter volume adjustment mechanism with over 50% lower forces compared to earlier models. Secure Volume Lock: A secure volume setting prevents undesirable volume drift during operation. Simply lift the plunger up to set volume and press down to lock in place with minimum effort. Dodpfx Aoxl Ezhedajcp Adjustable Finger Rest: The 120° adjustable finger rest accommodates both right- and left-handed users, allowing the hand to relax during pipetting cycles. Super Blow-out: 150% increase in air boost to ensure efficient delivery of micro-volumes and prevent capillary action in 50 µL models and below. Compatible Tips: Designed to work seamlessly with Thermo Scientific Finntip pipette tips for optimal performance.

Condition: good (used), Year of construction: 2003, machine/vehicle number: 042530122, Offer 25406 Technical data: - Cutting range: DA 12 – 118 mm Dsdpfx Adoxvazqjaecp - Wall thicknesses: 1.5 – 7 mm - Saw blade diameter: 63 mm - Saw blade spindle speeds: 40 to 70 rpm - Saw blade plunge depth adjustment with scale - Min. workpiece length: 250 mm - Drive: 220 V / 1600 Watt - Space requirements (approx.): W 600 x H 700 x D 400 mm - Weight (approx.): 90 kg