Used Portal for sale (1,273)

Condition: like new (used), Year of construction: 2024, pressing force: 200 t, Main Cylinder Press Capacity: 200 t - Max. working pressure: 285 bar - Cylinder stroke: 1500 mm - Clear width/clear height: 1500 mm - Distance between columns: 2050 mm - Max. lateral cylinder displacement: 1450 mm - Max. longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic power unit output: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic block and valves by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (cooler) cooling for hydraulics - Stroke cylinder integrated into the working table Rod Diameter: 25 mm - Stroke: 80 mm - Control via cylinder control or hydraulic unit (lever control) - 10 lift cylinders installed - Digital control with position measurement via encoder and pressure measurement with data output - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up and down travel of the cylinder - Pressure holding time at the lower table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop traverse with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time process parameters - Wireless remote control with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces suspended control panel) - Air/oil heat exchanger with decompression valve Rcsdpfx Aoxrb Nbjh Ujk 5. ELECTRICAL INSTALLATION AND SAFETY - The PLC system is by SIEMENS (S7-1200 series) - Siemens touchscreen LCD (9 inch) MTP900 installed in the control cabinet - Electrical devices from brands SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure of the pressure cylinder is set via LCD touchscreen - Modes (semi-automatic and automatic), power, vertical stroke, and dwell time of the upper cylinder are programmable - 99 recipes can be saved, with all parameters programmable for each recipe - Activation via wireless control - Features dual push-buttons for slow/fast cylinder travel, emergency stop button, and operation confirmation - Touch-sensitive safety edge at the bottom of the portal columns for safety - Control cabinet mounted on the bridge side wall - Anti-twist lock for the cylinder - Oil temperature displayed on LCD touchscreen - Overheating warning for hydraulic oil shown on LCD touchscreen - Filter contamination status displayed on LCD touchscreen - System errors displayed on LCD touchscreen - Press status information displayed on LCD touchscreen - Once oil temperature reaches 45°C, the air cooler starts to lower the oil temperature; machine operation stops above 65°C until it cools to operating temperature - Operating manual included - System meets all essential safety and health requirements as per CE regulations

Condition: used, Year of construction: 2019, CNC Gantry Plasma Cutting Machine Manufacturer: Microstep Model: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 Rcodpfxsxnmbnj Ah Ujk CNC control Working area: 2 x 4 m 'ʻMasterCutʼ' plasma rotator with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filter unit 161225

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, table length: 1,900 mm, table width: 1,100 mm, spindle speed (max.): 6,000 rpm, table load: 4,000 kg, position of the milling head: Vertikal, torque: 1,356 Nm, spindle nose: SK 50 - DIN 69871A, Equipment: rotational speed infinitely variable, BRAND NEW GANTRY MILLING MACHINE Control and Motors: HEIDENHAIN TNC 640 Digital Path Control Rjdpfx Aeq Ixc Tjh Ujck HEIDENHAIN Package (motors, measuring systems, electronic handwheel) Spindle Performance: Maximum spindle motor power: 30 kW ICS: Internal coolant supply, 70 bar Additional Equipment: Tool changer with double gripper, 60 positions Dual worm conveyor (longitudinal) Hinged belt swarf conveyor (transversal) Preparation for 4th axis (rotary table) Full enclosure, closed at the top Accuracies: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.020 mm Only inquiries from Germany will be answered.

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, total length: 6,000 mm, total width: 5,200 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 10 m/min, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm Rjdpfx Ahjx H Nxvo Ueck A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: excellent (used), Year of construction: 2019, X-axis 5,000 mm Y-axis 3,000 mm Z-axis 1,500 mm Table size 5,000 x 2,500 mm Tool holder HSK 63 Tool changer 60 positions Control HEIDENHAIN TNC 640 Including through-spindle coolant (IKZ) 40 bar Including simultaneous fork head Rodpex E S E Nofx Ah Ueck Including complete documentation Including IKZ 40 bar

Condition: used, Year of construction: 2006, operating hours: 13,016 h, functionality: fully functional, machine/vehicle number: 86664, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, overall weight: 16,500 kg, number of slots in tool magazine: 36, Equipment: documentation/manual, - Year of manufacture: 2006 - One owner, used exclusively by us - Fully functional, powered on, ready for demonstration - Control: Heidenhain iTNC 530 - Control on: 32,532 hours - Program run: 13,016 hours - Spindle: SK 40 / 12,000 rpm | 40 kW - Tool magazine: 36 positions - Travel X-axis: 2,940 mm - Travel Y-axis: 900 mm - Travel Z-axis: 950 mm - Rotary table: Ø1000 mm - 3D probe: RMP 60 Renishaw Rjdpsx Hhfbsfx Ah Usck - Tool probe: TT140 Heidenhain - Coolant through spindle: 40 bar Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, empty load weight: 8,400 kg, Submitting a bid obligates you to collect the item on time in calendar week 1 or 2 of 2026! Lathe with portal loading! MACHINE DETAILS Weight: 8,400 kg Rcedpfxexzudks Ah Uek

Condition: good (used), Year of construction: 2012, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 oxy-fuel (propan) torches Beuting oscillating discharge table Donaldson DFPRO12 filtration system for outdoor installation Redsu U Hm Aspfx Ah Usck 161225ä

Condition: used, mileage: 176,927 km, power: 243 kW (330.39 HP), first registration: 01/2021, fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, brakes: engine braking, color: red, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 3,750 mm, Year of construction: 2021, Equipment: ABS, air conditioning, cruise control, differential lock, traction control, = Additional Options and Equipment = - AdBlue system - Differential lock Rsdpfjxwwczox Ah Usck - Electric windows - Remote central locking - Air suspension - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Toolbox = Remarks = JOAB VL8 AA C 8,000 kg capacity. = Further Information = Technical Information Number of cylinders: 6 Driveline AdBlue system: Yes Axle Configuration Tire size: 315/70R22.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steering; Tire tread left: 75%; Tire tread right: 75% Rear axle: Dual tires; Inner left tire tread: 75%; Outer left tire tread: 75%; Inner right tire tread: 75%; Outer right tire tread: 75% Dimensions Dimensions (L x W): 6252 x 252 cm Weights Unladen weight: 9,550 kg Payload: 9,950 kg Gross vehicle weight (GVW): 19,500 kg Identification Type number: FM 330 / SKIP LOADER / HOOKLIFT = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information, but no rights can be derived from the texts provided.

Condition: excellent (used), Year of construction: 2018, operating hours: 19,394 h, functionality: fully functional, machine/vehicle number: 2522027, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,250 mm, total length: 5,900 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 6,139 mm, total height: 5,980 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 50 m/min, distance between stands: 3,225 mm, table load: 4,000 kg, workpiece weight (max.): 16,000 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, distance table center to spindle nose: 1,500 mm, tool weight: 8,000 g, Equipment: rotational speed infinitely variable, Control: Heidenhain TNC640 Number of controlled axes: 5; simultaneous Commissioned: 2019 Spindle run time (h): 12,629 Tool holder: HSK 100 Tool changer: 30 positions Linear motor Internal coolant supply (IKZ): 65 bar incl. chip conveyor incl. special operator panel Rcjdpfx Ajxx Svxsh Uok

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,400 mm, table length: 6,000 mm, table width: 3,000 mm, spindle speed (max.): 24,000 rpm, distance between stands: 4,000 mm, Technical Specifications • Table clamping area: 6,000 × 3,000 mm • X-axis (longitudinal travel): 6,000 mm • Y-axis (cross travel): 3,200 mm • Z-axis (vertical travel): 1,400 mm • Distance between columns: 4,000 mm • Feed speed: 30,000 mm/min Rsdpfxsxlip As Ah Uock • Table load: 4,000 kg/m² • Max. spindle speed: 24,000 rpm • Max. spindle power (S1-100%): 42 kW • Max. spindle torque (S1-100%): 67 Nm • Tool holder: HSK63A • Tool changer: 24 positions • C-axis: ±360° • A-axis: +95° / -110°

Condition: good (used), Year of construction: 2025, Portal compactor 8m3 Brand: Husmann Rcodsxtmviopfx Ah Ujk Typ: SPB 8 AN-E Build in: rev. 2025 Engine: 5,5 kW Backdoor: top hinged

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, empty load weight: 8,400 kg, Submission of a bid obligates timely collection in calendar week 1 or 2 of 2026! Lathe with gantry loading! Rcedpfx Aexzubpjh Ujk MACHINE DETAILS Weight: 8,400 kg

Condition: good (used), Year of construction: 2008, CNC portal plasma cutting machine Manufacturer: Messer Model: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 ALFA oxy-fuel torch 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC Rodpfx Asiff Dash Uock In-house technicians available for installation, commissioning, and training! All spare parts in stock.

Condition: good (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 10,000 rpm, Zimmermann FZ38 – 5-axis gantry Year of manufacture: 2005 – fully refurbished and upgraded in 2022 by Zimmermann for €600,000, full documentation available X 3000 Y 2500 Z 1250 A +/- 100 degrees C +/- 360 degrees Rsdpfx Aoxziamoh Uock 2 spindles: 50 kW – 24,000 rpm and 44 kW – 10,000 rpm HSK 100 Linear axes certification 5/m Siemens control U… Immediately available This machine was completely overhauled and upgraded by Zimmermann in 2022. At that time, approximately €600,000 was invested, with all invoices available. The machine is in very good, near-new condition.

Condition: used, Year of construction: 2020, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 250 mm, For sale is a used, but like-new SK0805 gantry milling machine. The machine has been regularly serviced at all times and is in excellent visual and technical condition. It is fully functional, tested, and ready for immediate operation. Our service commitment: Rcsdpfoxwau Hex Ah Ujk For us, quality, expertise, and customer satisfaction are top priorities. Our team consists of qualified and experienced technicians specializing in Mazak machines as well as other machinery. We place great value on personal support and are happy to assist you at any time, even after the purchase. With us, you are in the best hands – professional, reliable, and passionate about machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 47,870 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, table load: 10,000 kg, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS Rcsdpfxex Agh Re Ah Ujk X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Table load capacity: 10,000 kg Spindle taper: ISO 50 Standard spindle speed: 6,000 rpm Spindle motor (continuous / 30 min): approx. 22/26 kW Tool changer capacity: 32 tools Max. tool diameter: Ø 127 mm / Ø 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Rapid traverse X-axis: up to 20,000 mm/min Rapid traverse Y-axis: 15,000 mm/min Rapid traverse Z-axis: 15,000 mm/min Cutting feed: approx. 1 – 10,000 mm/min MACHINE DETAILS Program runtime hours: 47,870 h EQUIPMENT Extension of equipment to automatic head changer with angular milling head

Condition: excellent (used), axle configuration: 3 axles, first registration: 01/2006, loading space length: 7,300 mm, loading space width: 2,200 mm, total length: 9,940 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R 22.5, wheelbase: 5,130 mm, color: other, Year of construction: 2006, Axle configuration Tyre size: 385/65 R 22.5 Suspension: air suspension Rear axle 1: Tyre profile left: 80%; Tyre profile right: 80% Rear axle 2: Lift axle; Tyre profile left: 80%; Tyre profile right: 80% Rear axle 3: Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 5.160 kg Carrying capacity: 21.840 kg GVW: 27.000 kg Condition Technical condition: very good Visual appearance: very good Identification Registration number: WS-RB-50 = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business Rjdeu A Anbepfx Ah Uock - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands.

Condition: good (used), mileage: 82,038 km, power: 169 kW (229.78 HP), first registration: 03/1992, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, Year of construction: 1992, = Additional options and accessories = - Aluminum fuel tank - Leaf spring suspension - Brake booster Rcsdpfxjxva Iwj Ah Uok - Electric windows - Electrically adjustable exterior mirrors - Electronic Braking System (EBS) - EPS - Tipping hydraulics - Fog lights - Radio/CD player - Sliding roof - Side door - Toolbox = Further information = Suspension: Leaf spring suspension Front axle: Steered Unladen weight: 8,820 kg Payload: 9,180 kg Gross vehicle weight (GVW): 18,000 kg Technical condition: good Visual condition: good Please contact Emad Al Shogran for further information. Vehicle number: 111 VOLVO FS7 / 4x2 / Full leaf spring / Manual transmission / 82,000 km VIN: YB1E5A3A4NB483457 Transmission: Manual Suspension: Leaf / leaf 82,000 km original Good condition = Company information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: used, Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Bach Model: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Redew El Udopfx Ah Usck Worktable: 1.5 x 6 m 2 oxy-fuel torches 101225ä

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 6,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 12,000 rpm, controller model: Heidenhain iTNC530 mit Handrad, Machine with 4th axis as a swivel axis & regularly serviced by the machine manufacturer! TECHNICAL DETAILS Rcedpfx Ahjxvx U Ae Usk Working areas X-axis: 3,000 mm Y-axis: 6,000 mm Z-axis: 1,250 mm Milling head A-axis: controllable, tiltable Milling spindle Spindle power: 4.4 kW Spindle speed: 12,000 rpm Tool holder: 78/8 flange Tool clamping: manual with clamping nut Linear axis drives Feed rate X, Y, Z axes: up to 20 m/min Axis acceleration X, Y, Z axes: up to 1.5 m/s² MACHINE DETAILS Control: Heidenhain iTNC530 with handwheel Connected load: approx. 25 kW Main fuse: 42 A Dimensions & Weight Space requirement for machine: approx. 5,500 x 9,000 x 4,500 mm Total weight: 9,600 kg FEATURES Conversion to high-frequency spindle possible Important: Table and the wooden board shown in the photos are not included in the scope of delivery.

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis + No foundation required Rodpsxxvp Nsfx Ah Usck + Glass scales in X, Y, and Z linear axes + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Condition: good (used), Year of construction: 2006, CNC Gantry Flame Cutting Machine Manufacturer: Messer Model: Easytherm 4600 Rcodpfxjivz A Rj Ah Usk Year: 2006 Control: Global Control Working area: 3 x 9 m No table included!! A table can be offered upon request! Track length: 12 m with HEB beam 1 oxy-fuel torch ALFA 1 plasma torch with Kjellberg 160i plus power source Including marking unit Torit filter system In-house technicians available for installation, commissioning, and training! All spare parts in stock. 161225ä

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Rcodpfx Aegqkc Noh Uok Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL-P 12001.20 Year of manufacture: 2007 CNC control 1 plasma torch with Kjellberg HiFocus 160i power source Rcjdpfx Ajuv Hkgeh Uok Extraction table: 2 x 12 m Donaldson Torit DCE filter system 161225ä