Used Portal for sale (1,274)

Condition: new, Year of construction: 2019, pressure:275 t distance between columns:3000 mm total power requirement:30 kW weight of the machine ca.:40 t draw back pressure:27 t pump capacity:Axialpumpe mit Proportionalventil :6000 mm :max. 3000 mm Table dimensions:6000 x 3000 mm table height over floor:700 mm distance between table / ram:1100 mm :450 l Nsdpfxjfxyigs Ah Uewr traversing speed:auf X und Y, 30-33 mm/sec. down speed:2-10 mm/sec :2-50 mm/sec. Cylinder hub:900 mm Cylinder diameter:440 mm Stestle extension:200 / 200 mm / Ø :40 mm Siemens Control System:S7 1200 Monitor Siemens 9":Touch Panel Tax desk:tragbar

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, A used CNC portal milling machine with a C-axis for turning (CNC turning, CNC milling and angle head machining). Boring machine machining! Hirth gearing! TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Table diameter: 2,500 mm Nsdpfevvh R Dox Ah Ujwr Max. turning diameter: 3,000 mm Max: turning height: 1,000 mm Machine: Uniport 6000 Boring machine work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. TRAVEL PATHS X: 3,000 mm Y: 3,000 mm Z: 1,000 mm Dimensions Table diameter: 2,500 mm & 2,000 mm Max. turning diameter: 3,000 mm & 2,500 mm Max: turning height: 1,000 mm C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then there is the turning attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this over the Hirth gearing by 2.5° each. All holders (milling, turning, angle head) are clamped using HSK-100. The machine comes with a radio probe from M&H (Hexagon) for measuring and zero point probing.   The machine is in operation and can be inspected on site. A video of the machine is available.

Condition: refurbished (used), Year of construction: 1999, travel distance X-axis: 11,450 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,250 mm, Technical description Value Unit Travel distance X-axis: 11,450 mm Y-axis: 3,500 mm Z-axis: 1,250 mm Cross-section of the Z-axis slider: 360 x 360 mm Portal aperture: 3,000 mm Height under vertical spindle: 1,400 mm Working clamping width: 2,500 mm Milling unit: Type FA 305 C Power: 30 kW Max. torque: 1,070 Nm Max. speed: 4,000 rpm Cross section of the pusher: 360 x 360 mm Vertical head with spindle Power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Rapid traverse in X, Z: 25,000 mm/min Rapid traverse in Y: 20,000 mm/min Work feed infinitely variable in X, Y and Z: 10,000 mm/min Compressive force of each axis: 25,000 N Tool holder: SK 50 Horizontal angle head with 144 x 2.5° pitch, with SK50 spindle Available power: 30 kW Max. speed: 4,000 rpm Max. torque: 1,070 Nm Positioning increment: 2.5 degrees Longitudinal pallet system 1 pallet shuttle with 2 storage stations 1 manual pallet transfer system between machine and shuttle 2 workpiece holder pallets: 5,000 x 2,500 mm Tool changer Chain magazine: 80 positions Distance between the positions on the chain: 130 mm Diameter of consecutive tools: 125 mm Tool diameter max.: 200 mm Maximum tool length: 400 mm Tool weight max.: 25 kg Tool change time, tool to tool: 8 sec Tool change time, chip to chip: 38 sec Nedpfetix S Nsx Ah Ujwr Equipment: Cooling devices: - Cooling via orientable nozzles - IKZ / cooling through the center of the spindle, 3,000 l tank, capacity: 30 l/min, pressure: 7 bar at the mold 2 chip conveyors: 1 Portal cladding Measuring probe, make: RENISHAW, type: MP14 Electronic handwheel Remote diagnosis Tool management and wear management Documentation in 2 copies: German / French CE marking Very well maintained, continuously serviced condition!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 22,000 rpm, Original purchase price of the machine: approx. €1,200,000 TECHNICAL SPECIFICATIONS Control system: CNC Fidia C20/6H-SB X-axis travel: 5,000 mm Y-axis travel: 2,500 mm Z-axis travel: 1,500 mm A-axis: ±110° C-axis: 360° (±182.5°) Spindle speed: 22,000 rpm Tool holder: HSK A63 Tool changer: 6-position (pick-up) Milling spindle power: 30 kW Rapid traverse X/Y/Z: 20 m/min A/C-axis torque: 500 Nm A/C-axis speed: 20 rpm MACHINE DETAILS Total power: 90 kW Weight: 65 t Nedpfx Aswzkz Ieh Uewr EQUIPMENT - Control with HPX 20 hand-held unit - Coolant-lubricant system - Centralized lubrication for X, Y and Z axes - Hydraulic power unit HC22DT / 2.61-C5 - Enclosure and monitored loading doors - 14 used tool holders

Condition: good (used), Year of construction: 2010, operating hours: 720 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 3,000 mm, Reserve price removed - guaranteed acceptance to the highest bidder.  TECHNICAL DETAILS Nedpfxevuzxlj Ah Uowr Travel path X: 2,000 mm Travel path Y: 3,000 mm EQUIPMENT - High frequency spindle - 2 x Kuka KR 210 R2700-2 / reach 2,700 mm Nominal load capacity: 210 kg / Year of manufacture 2001 + 2002 - Enclosure

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top. Nsdpsvwgmmjfx Ah Uewr

Condition: new, pressure:400 t distance between columns:3400 mm stroke:500 mm total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. Nedpfx Ahofhcc Rs Ujwr down speed:0-10 mm/sec :0-25 mm/sec.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, A used CNC portal milling machine with carousel turning unit / C-axis for turning Hirth gearing TRAVEL PATHS Nodpfx Ahsvvh T So Uowr X: 3,000 mm Y: 2,500 mm Z: 1,000 mm Table diameter: 2,000 mm Max. turning diameter: 2,500 mm Max. turning height: 1,000 mm Machine: Uniport 6000 Boring work, also CNC turning, CNC milling and angle head machining. All in one clamping, combined with the speed and precision of a CNC portal milling machine. C-axis for turning New price: €1.8 million Dismantling: by arrangement The machine comes with a protective cover so that no chips get into the Hirth gearing on the slide during milling. Then the rotary attachment head for the turning tools and an angle head for lateral machining on the plate field or on the rotary table. You can swivel this by 2.5° each time over the Hirth gearing. All holders (milling, turning, angle head) are clamped via HSK-100. A radio measuring probe from M&H (Hexagon) for measuring and probing the zero point is included with the machine. The machine is in operation and can be viewed on site. A video of the machine is available.

Condition: used, Year of construction: 1988, functionality: fully functional, travel distance X-axis: 7,500 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,000 mm, table width: 2,000 mm, table length: 7,000 mm, overall weight: 180,000 kg, year of last overhaul: 2016, Table 7020x1810 mm Note portal width 2250 mm Travel paths: X=7387 mm Y=3070 mm Z=Support up to max without tool 920 mm + W 1000 Nwedpfx Ahjwx Nltj Uor Control: Heidenhain ITNC 530 Simultaneous: In X,Y,Z yes. In A,B,C with 1° Hirth gearing Spindle type: SK50 / Gearbox spindle Four attachment heads Internal spindle cooling: Yes Operating hours: 95475 h Spindle hours: 37984 h Modernization carried out: 2003 / Control and drives renewed

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Nwedpjin Ub Tefx Ah Uor Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: excellent (used), Year of construction: 2017, operating hours: 9,380 h, functionality: fully functional, machine/vehicle number: 4455, travel distance X-axis: 3,740 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 60,000 rpm, Reserve price removed - guaranteed to go to the highest bidder. TECHNICAL DETAILS X-travel: 3740 mm Njdpovuztiefx Ah Ujwr Y-travel: 2800 mm Z-travel: 480 mm Control: Siemens Sinumerik ONE - HMI Operate user interface, WIN 10 Spindle speed: 60,000 rpm Spindle axis manufacturer: GMN Extraction: Ruwac Zone 22 Extraction hood: rigid or height-adjustable EQUIPMENT - 1 Kuka KR 420 R3300 robot / reach 3326 mm, nominal payload 420 kg - 1 Kuka KR 200 L140-2comp robot / reach 2800 mm, nominal payload 140 kg - 1 Kuka KR 140-3comp robot / reach 2400 mm, nominal payload 140 kg - Conveyor belt for transporting the scrap metal - Chip conveyor belt

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance Y-axis: 3,000 mm, controller manufacturer: Siemens, controller model: Sinumeric, number of axes: 2, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item by 31.07! TECHNICAL DETAILS Axle Data Maximum vertical axle load: 180 kg Nedpfxowykx Rj Ah Uewr Maximum horizontal axle load: 40 kg Y-axis travel: approx. 3,000 mm Motor / Gearbox Motor (Siemens): 1 FK 7083 (V-axis) / 1 FK 7032 (U-axis) Standard gearbox: Alpha SP 100 (V-axis) / Alpha SP 60 (U-axis) Nominal speed: 3,000 rpm (V-axis) / 6,000 rpm (U-axis) Maximum operating speed: 3,000 rpm (V-axis) / 4,500 rpm (U-axis) Nominal torque: 10.5 Nm (V-axis) / 0.85 Nm (U-axis) Gear ratio: 10 (V-axis), 10 (U-axis) Chain and Sprocket Chain transmission ratio: 17/19 = 0.8947 Effective gearbox speed: 335.3 rpm Sprocket module/profile: 3/4” (V-axis) / 3/8” (U-axis) Number of teeth on drive sprocket: 17 (V-axis) / 26 (U-axis) Pitch diameter: 103.7 mm (V-axis) / 79.02 mm (U-axis) Drive sprocket circumference: 325.77 mm (V-axis) / 248.24 mm (U-axis) Speeds and Acceleration Maximum main axis speed: 1.82 m/s (V-axis) / 1.85 m/s (U-axis) Maximum acceleration: 3 m/s² (V-axis) / 3.36 m/s² (U-axis) Y-axis travel: approx. 3,000 mm MACHINE DETAILS Dimensions & Weight Cell dimensions (W x D x H): 1,250 x 2,475 x 2,150 mm Cell weight (incl. control unit and power supply, excl. attachments): 2 t Electrical Data Phase: 3~ / 50 Hz Operating voltage: 230/400 V Control voltage: DC 24 V External voltage: DC 24 V Rated current: 17 A Rated power: 12 kW Protection: 25 A EQUIPMENT With gripper arm

Condition: new, Portal machine - the space miracle! CNC portal milling machine for large traverse paths with small space requirements! Nwsdpfx Ajhqhlvjh Uor ADVANTAGES: -optimized space utilization, completely free table clamping area -best possible chip protection due to overhead axes -particularly suitable for high and bulky components -PILZ safety technology -Windows 10 APPLICATIONS: -chipping -measuring and testing -dosing applications FOR MACHINING: -Aluminum / light metals -Milled plastics -Ceramics -Non-ferrous metals (brass, bronze, etc...) -Plastics -Wood Maximum functionality with minimum space requirements is the motto of the OverHead Gantry M. The basic machine can be optimally configured for many sectors and work areas using a variety of variable equipment features and additional options. The possible applications of the OverHead Gantry M include measuring, testing and metering applications in addition to machining. The power of the milling motor of up to 2.2 kW and 20,000 rpm and a traverse speed up to 250 mm/sec make it suitable for processing wood and plastic as well as light and non-ferrous metals. The free processing area and its excellent price/performance ratio off er decisive benefits compared to similar products. The OverHead® Gantry M is available in five different sizes for different process areas from M20 to M50. Do you require the control cabinet on the right-hand side or would you prefer the control panel to be on the left? No problem – we will be happy to accommodate your requirements. And of course we will take care of maintenance and support for your OverHead® Gantry M. Our service technicians can be reached by telephone and can attend to you quickly on-site as needed. In addition, we also off er our in-house isy-CAM 2.8 software and can advise you on your specific application. BENEFITS: -Optimal use of space -Free machining area -Fixed table, mobil portal -Variable clearance of 340- 590 mm -Also suitable for a large chip volumes SET UP: Portal: mobil, Table: Fixed

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Initial commissioning: 2000 Control system: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ±110° C-axis: ±300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic Spindle freshly overhauled at the end of 2024! Linear axis drives Feed rate X, Y axis: up to 20 m/min Feed rate Z axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Connected load: 40 kW Main fuse: approx. 80 A Dimensions & weights Machine footprint with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Nodpfx Ahow Rl S Ss Uewr Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The additional clamping table shown is not included in the scope of supply Condition of the machine Fully functional, in very good condition. Machine remains connected and is available immediately.

Condition: used, Year of construction: 2014, X-travel: 1250mm, y-travel: 1280mm, z-travel: 150mm, max. feed rate: 15m/min, repeat accuracy: 0.01mm, spindle rotational speed: 0-24,000/min, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5kW, controls: Siemens Sinumerik 808D Milling, weight: 1.2t, with collet spindle, Phenol vacuum high-pressure table, 850W servo motors Yaskawa, steel base, precision ball screws in all axes, x-axis with dual drive, linear guides, protective cover for all drive axes, suction foot for chip extraction, automatic spray cooling and material sensor. Nedpjwqd Rhefx Ah Ujwr

Condition: good (used), Sturdy crane system, ideal for glass storage or workshop, Load capacity: 3t, Nsdpjryv S Aefx Ah Uowr Length: 14250 mm, width: 8500 mm, height: 3650 mm Max. hook height: 3280 mm, Max. Overall height: 3950 mm.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0-201-21-4348, travel distance X-axis: 5,800 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HOMATIC, controller model: PC85, workpiece length (max.): 5,860 mm, workpiece width (max.): 1,600 mm, total height: 2,950 mm, total length: 11,500 mm, total width: 7,500 mm, spindle motor power: 7,500 W, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, HOMAG BAZ 722/58/K Portal 4-axis CNC machine with 2 shuttle tables and gluing unit Year of manufacture: 2004 Maximum workpiece dimensions: Workpiece length X max. (with gluing unit) - max. 5660 mm for single allocation - max. 2680 mm for pendulum operation Workpiece length max. (cutter D=25mm) - max. 5860 mm for single allocation - max. 2870 mm for pendulum operation Workpiece width Y max. - max. 1300 mm - all units - max. 1400 mm - with gluing unit - max. 1520 mm - with milling operation D=25 mm Nedpfswpb Nfox Ah Uewr EQUIPMENT / SPECIFICATION Console table / vacuum system - 2 independently operating shuttle tables in Y direction (2 Y-axes) - Both shuttles can be used synchronously (moved) for processing large workpieces (single processing). - 6 movable consoles per shuttle (total 12), each with 1 longitudinal stop at the front Each console fitted with a lift-off rail on the side - Console length 1340 mm - 3 retractable side stops 2 x left, 1 x right (mirrored) - Approx. 20 block suction cups 160x140 mm - 2 vacuum pumps, capacity 100/140 m3/h, 1 x for left field, 1 x for right field Milling spindle / units / tool changer - Main spindle 7.5 kW (in S6 or S1 operation), n max = 18,000 1/min, vector-controlled HSK F63 tool clamping Liquid cooling with temperature monitoring NOTE: The main spindle was replaced in 2021. - C-axis with unit interface - Additional spindle with permanently mounted gluing unit (own X and C axis), 360° gluing, with butt gluing - Double edge roll holder, automatic edge change - Fixed drilling head with 12 vertical spindles (individually selectable) / 6 spindles in X and 7 in Y direction, Drive motor 4 kW, 4500 – 6000 1/min - 18-fold tool changer (rotary type) - Saw and crosscut unit for tool changer - Drilling and milling unit 4 spindles (2 * X-, 2 * Y-direction) - Combination flush-milling and scraping knife unit Chip extraction / safety / other - Chip conveyor belt in machine body - Safety fence left and right of the machine, 1 door with safety functions - Extraction nozzle Control / software: • PowerControl PC85 operating system NOTE: Both machine computers were replaced in 2020. • WoodWop 5.0 • Woodscout • Power supply 400 V, 50/60 Hz • Cooling unit for switch cabinet • Laser positioning Mr. BEAM Machine dimensions (occupied area after installation) L 1150 x W 700 x H 290 cm Availability: immediately

Condition: excellent (used), Year of construction: 2019, operating hours: 3,551 h, functionality: fully functional, machine/vehicle number: 0345, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,500 rpm, number of slots in tool magazine: 60, Machine powered at least until June 5, 2025 No reserve price - guaranteed sale at the highest bidder! TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 2,600 mm Z-axis travel: 1,000 mm Distance spindle nose to table: 150 – 1,150 mm Distance table to gantry: 2,800 mm Control: HEIDENHAIN iTNC 640 Table Table dimensions: 3,000 x 2,400 mm T-slots: 28 x 13 x 180 mm Table load: 11,000 kg Spindle and feed rate Max. spindle speed: 4,500 rpm Tool holder: BT 50 Feed rate X/Y axes: 15 m/min Feed rate Z-axis: 12 m/min Rapid traverse X-axis: 7 m/min Rapid traverse Y-axis: 7 m/min Z-axis rapid traverse: 7 m/min Positioning accuracy: ±0.005 mm over 300 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 60 Hz Connected load: 65 kVA Nsdpfx Aewm E S Sjh Uowr Total length: 9,000 mm Total width: 8,000 mm Total height: 5,500 mm Power-on time: 11,498 h Program run: 5,585 h Spindle hours: 3,551 h Axis travel time: 3,945 h EQUIPMENT - 60-station tool changer including BT 50 tool holders - 4th axis from DETRON - Coolant system - Chip conveyor - HEIDENHAIN iTNC 640 control

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, operating hours of spindle: 4,486 h, Initial commissioning: 2002 Control system: Fidia C20 with HPX operator panel Machine hours: 146,161 h X-axis: approx. 3,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,500 mm A-axis: ± 105° C-axis: ± 300° Nwodpfx Ahew Au H Ro Uor Clamping table Clamping surface: approx. 5,000 x 2,000 x 400 mm T-slot spacing: 18H12 / 250 mm Table load capacity: 15,000 kg/m² 2-axis milling head AC3 (2003) Spindle power: 28 kW Spindle speed: max. 18,000 rpm Torque: 90 Nm Tool holder: HSK 63A Tool clamping: hydraulic Minimum quantity lubrication: external Linear axis drives Feed rate X, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z-axis: up to 1.5 m/s² Electrical connections Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine including peripherals: approx. 7,300 x 5,600 x 5,600 mm Total weight: approx. 16,500 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: turquoise Additional equipment - 18-position chain-type tool changer - 3-sided enclosure, without extraction ducts Condition of the machine Fully operational, very good condition. Dismantled, stored and immediately available.

Year of construction: 2015, condition: ready for operation (used), A CNC gantry flame cutting machine ESAB is available. Track width: 4000mm, cutting dimensions X/Y: 3000mm/6000mm, track length: 8000mm, track height: 465mm, table height: 700mm, cutting speed: 24m/min, flame cutting table dimensions X/Y: 3100mm/6180mm. Cutting process: Oxyfuel/plasma, Torch: Cooljet-Pro, Plasma source: m3 202 EPP 202 GEN 2, Plasma torch: PT-36. Filter capacity: 9000m³/h, Filter area: 180m², Particle size: 0.1µm. The plasma source cooling system must be repaired. Documentation available. On-site inspection is possible. Nwodpfx Ajw Azu Ijh Usr

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Tool clamping: hydraulic Nwsdpewywcisfx Ah Ujr Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: ready for operation (used), Drilling capacity (steel): 100mm, max. pitch circle diameter: 7000mm, spindles: 2, spindle speed: 3000rpm, spindle mount: ISO 50, drill carriage stroke: 900mm, feed: 6m/min, power: 125kW. Machine dimensions X/Y/Z: approx. 13000mm/11000mm/5100mm, weight: approx. 18000kg. On-site inspection is possible. Nedpfxsvriq Rs Ah Uowr

Condition: new, Year of construction: 2024, operating hours: 50 h, machine/vehicle number: 305, Available: February 2023 Control: Osai X-axis: approx. 3,100 mm Y-axis: approx. 2,100 mm Z-axis: approx. 1,000 mm A-axis: ± 115° C-axis: ± 360° Nsdowwq Hcepfx Ah Ujwr Clamping table Clamping surface: approx. 3,100 x 2,100 x 213 mm Aluminum with T-slots across every 250 mm Max load: 1000kg distributed over the entire surface 2-axis milling head ST7 Spindle power: 10 kW Spindle speed: max. 24,000 min-1 Torque: 15.3 Nm Tool holder: HSK 63F Tool clamping: pneumatic Blowing air / MMS: outside Drives linear axes Feed speed X and Y axes: up to 50 m/min Z-axis feed rate: up to 30 m/min Color Housing, portal, control cabinet: light gray Z-slider and milling head: orange Additional equipment - 15-way tool changer - Control in a separate, rollable desk

Condition: new, Year of construction: 2025, machine/vehicle number: 306, First commissioning: 2024 Control: Heidenhain TNC 640 including handwheel HR 520 X-axis: approx. 4,000 mm Y-axis: approx. 2,700 mm Z-axis: approx. 1,300 mm A-axis: ± 120° C-axis: ± 360° Clamping table Clamping surface: approx. 4,000 x 2,500 x 213 mm Aluminum with T-slots across every 250mm Max load: 1000kg distributed over the entire surface 2-axis milling head HS673 Spindle power: 22 kW Spindle speed: max. 24,000 min-1 Torque: 18 Nm Tool holder: HSK 63A Tool clamping: pneumatic Blowing air / MMS: outside Linear axis drives Feed rate X and Y axis: up to 60 m/min Feed rate Z axis: up to 40 m/min Color Housing, portal, control cabinet: light gray Z slider and milling head: orange Additional equipment - Work area cover - 16-way tool changer - Control in a separate, rollable desk Nodpfxsvy Dugs Ah Ujwr Optional for an additional charge: - Blum laser tool measurement - Renishaw RMP60 radio probe - Heidenhain remote diagnosis Images show identical machine with slightly different equipment!

Condition: excellent (used), Year of construction: 2012, First commissioned: 2012 Control: Heidenhain iTNC 530 including handwheel HR 420 X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,500 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 5,700 x 3,000 x 300 mm 2-axis milling head VH20 Spindle power: 40 kW Spindle speed: max. 25,000 min-1 Torque: 48 Nm Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Blowing air: external Drives linear axes Feed rate X, Y axis: up to 50 m/min Feed speed Z-axis: up to 30 m/min Axis acceleration X-, Y-, Z-axis: up to 2.5 m/s2 Connection data Connection power: 190 kVa Back-up fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 7,700 x 5,850 mm Total weight: approx. 63,000 kg Color Housing, portal, control cabinet: RAL 7035 light gray Milling head and applications: RAL 6038 bright green Nwsdpfxovy A Tno Ah Ujr Additional equipment - Coolant supply with belt filter system - 30-way chain tool changer - Work area cover - Chip conveyor, right side Optional for an additional charge: - BLUM laser Condition of the machine Fully functional, very good condition. Already dismantled and stored.