Used Production Of Construction Materials for sale (43,301)

Condition: used, Door panel production line Note: The system started its series production in 2023; at this point, all machines were synchronized and overhauled as needed. Used door panel production line consisting of: Double-end profiler Manufacturer: Kraft Technical data - 2 scissor lift tables - 2 vacuum grippers - Infeed roller conveyor with belt conveyor - New Siemens touch control 13 roller conveyor elements Manufacturer: Kraft Technical data - Driven, approx. 3000 mm each Continuous insert material supply Special insert line HPL - Portal feeding system Manufacturer: Kraft Year of manufacture: 2023 Technical data - For singulating, aligning, and placing HPL Glue application machine Manufacturer: Bürkle Year of manufacture: 1990 Glue application machine Manufacturer: Kuper Year of manufacture: 2018 Lay-down table Technical data - Pneumatic fixing (centered on the center axis) - Device for automatic laying of battens - Fixed stop in the direction of travel, to the left of the timing belt conveyor - Positioning of the battens against the end stop for transfer with the suction system - Servo-motor driven and movable on the Y and Z axes - Uptake of the battens via a suction bar - Vacuum generation via ejector Stapling station Technical data - Servo-motor driven width adjustment of the stapling units, centered on the center axis - from min. 430 mm - max. 1,300 mm - 4 support brackets for holding the stapling components and guide units - 4 pneumatic guide units for holding the stapling units - and for the feed movement / pressure pad on the Z-axis - 4 feed slides with pneumatic pressure to fix the battens during stapling - 4 stapling units, manufacturer BEA - 2 pneumatic end stops Scoring saw Ndsdpszuzh Aofx Afwsa Technical data - 2 units: Saw units at the top (right/left) - For creating ventilation slots - Mounted on a linear axis system for centering on the cutting width manually - Pneumatic feed of the saw units, sensing the center of the upper edge - Continuous multi-daylight press Manufacturer: Bürkle Optima 1428/50 Year of manufacture: 2017 Technical data - Start of series production in 2023 - 2 x 4 platens with a press area of 1400 x 2800 mm - With automatic feeder, manufacturer Bürkle - Removal device, manufacturer Bürkle Trimming station Technical data - For trimming overhanging edges on the top and bottom of the doors Buffer system Technical data - For intermediate buffering of semi-finished door panels - Total length approx. 14,000 mm - Solid steel construction - Approx. 200 individual compartments Label printer Technical data - Automatic label printer for labeling in-line Storage and transport system Manufacturer: Kraft Technical data - Driven storage and transport roller conveyor - Roller width 1000 mm - Total length approx. 120 meters Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, maximum load weight: 10 kg, empty load weight: 825 kg, Details: - Payload weight: up to 10 tons - Total volume: 15.76 m³ - Tare weight: approx. 825 kg Ndodpfx Afjzwmqujwoa - External dimensions L/W/H: 2991 x 2438 x 2591 mm

Condition: used, Year of construction: 1998, Window manufacturing system Manufacturer: Weinig Type: Unicontrol 10-5 Year of manufacture: 1998 Technical data Working width: 40 - 220 mm Working height, longitudinal machining: 40 - 100 mm Working height, transverse machining: 40 - 100 mm (80 mm counterpiece height) Workpiece length, longitudinal machining: min. 220 mm + 2 x tenon length Workpiece length, transverse machining: min. 275 mm + 1 x tenon length at 320 mm tool diameter Feed (transverse machining) Motor power: 0.3 kW Feed speed: 3 - 25 m/min Workpiece clamping: by means of 2 clamping jaws Length stop: with scale and magnifying glass for frame or sash outer dimensions Counterpiece: pneumatically controlled - 4 positions - (not for studio windows) up to a wood height of max. 80 mm Double part package: For single or double part feeding. With transverse separation and retention system 1. Wood (lying against the stop) Wood width: 55 - 90 mm 2. Wood Wood width: 130 mm Feed (longitudinal machining) Motor power: 2.2 kW Feed speed: 4 - 18 m/min (continuously variable via frequency converter) Feed roller spacing: 100/120 mm Feed roller width: 30/50 mm Feed roller diameter: 95 mm Ndsdpfxszuyxge Afwsa Machining units Cut-off saw Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 2800 rpm Tool circle diameter: max. 400 mm Adjustment, axial: pneumatically controlled against a 4-position turret 1. Tenon and mortise spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 3250 rpm Tool circle diameter: max. 320 mm Tool clamping length: 320 mm Adjustment, axial: 240 mm Number of tools: 4 x 80 mm Axial adjustment: hydraulic 1. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 Axial adjustment: hydraulic 2. Profiling spindle Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6000 rpm Tool diameter: max. 232 mm Tool zero circle diameter: 130 to 140 mm Tool clamping length: 320 mm Adjustment, axial/radial: 240/80 mm Number of tool positions: 4 x 80 mm Axial adjustment: hydraulic 2 Mechanical spindle brake for profiling spindle 3 Mechanical spindle brake for cut-off saw and profiling and sawing units Profiling milling unit (horizontal, top) before the last profiling spindle radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 130 mm Tool clamping length: 40 mm Adjustment, axial: 52 mm Adjustment, radial: 125 mm Profiling milling unit (vertical, right) at the end of the machine radially controlled to 2 positions axially controlled to 2 positions Motor power: 3 kW Spindle diameter: 40 mm Spindle speed: 5850 rpm Tool circle diameter: 210 mm Tool clamping length: 160 mm Adjustment, axial: 90 mm Adjustment, radial: 100 mm Length, tenon and mortise spindle with 640 mm tool clamping length (instead of 320 mm spindle) Motor power: 15 kW Spindle speed: 2925 rpm Number of tool positions: 8 x 80 mm Adjustment, axial: 560 mm Laser alignment light for cut-off saw for detecting the section Studio window configuration Swiveling length stop +/- 60 with electronic digital display and pneumatic clamping Sliding counter rail Special pressure pad for angled part production Limitation: Wood thickness max. 120 mm At -60 position: Workpiece width max. 110 mm with 80 mm tenon length, or max. 150 mm with counter profili

Year of construction: 2006, condition: used, Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nodpfjzry N Tox Afwoda Yorick Diebels

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Nedpfxszvdk As Afweda Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: like new (used), Year of construction: 2023, operating hours: 50 h, functionality: limited functionality, working width: 1,800 mm, type of input current: three-phase, total width: 2,400 mm, total length: 2,000 mm, total height: 2,200 mm, overall weight: 2,300 kg, additional equipment features: Complete with 6 de-reeling stations, Following consultation over 5 years with major UK manufacturers, production units, including working within factory which builds these machines, this machine was commissioned and built for experimental works to enable proof of concept for UK Government / Ofgem. Ndjdpjzma E Defx Afwsa This machine is built with steel welded frames to robust industry standards and fitted with 202mm diameter mandrel. Other mandrel sizes can quickly and easily be fitted. Six robust steel framed de-reeling stands – on wheels - are included, A steel framed deluge system is included. An alternative individual application system by manifold of a new, unused Grunfeld GRS 5 - One component dispense system, can be included if required, enabling glue supply to individual reels. The electronic controller is by Hartec Control systems, with infinite capstan speed control. Current equivalent machines by Spiraltech start at over £100,000 ! Capstan angle manual control is industry tradition, as once set, no adjustment is needed. Approx 10 paper reels are supplied FOC for pretest alignment. Specially incorporated accessible gearbox readily disconnected from motor. Brand new electric 3 – phase motor with less than 10 hours useage. Selection of forming belts to suit differing materials.

Condition: used, mileage: 872,000 km, power: 290 kW (394.29 HP), first registration: 10/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Mercedes Actros 1840 4x2 semi-trailer tractor * Euro 6c emission standard * Long-haul cab with 1 bunk * ACC adaptive cruise control * Lane keeping assist * Blind spot monitoring system * Differential lock * Leaf spring suspension with air suspension * Automatic climate control * Auxiliary heater * Heated seats * Power take-off (PTO) * Radio/CD player * Navigation system * Xenon headlights Nedpfjzwbcrjx Afwjda * Alcoa aluminum wheels * EFH (likely an abbreviation for a specific feature or equipment – further context needed for accurate translation) * First owner * ADR FL/AT (compliant with ADR regulations for the transport of dangerous goods, category FL/AT) * Unladen weight 6819 kg * Available in multiple units

Year of construction: 2022, condition: ready for operation (used), controller manufacturer: SIEMENS, table load: 3,000 kg, Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details. • Storage system: STOPA Compact II • Type: Automated sheet metal storage system with chaotic storage management • Storage height: 7,900 mm • Sheet format: 3,050 x 1,525 mm • Maximum load per storage location: 3,000 kg • Number of storage locations: 266 • Total storage capacity: 798 t • Configuration: 8 sections/towers, up to 37 storage levels per section Ndjdpfx Afjzu Sugjwoa • Pallet format: GF 3050 x 1525 x 90 mm • Pallet types: SPO, SPMgl • Loading heights: 185 / 275 / 460 mm • Functions: Automatic material storage and retrieval; automatic material supply to connected production cells; storage interface for integrated production machines • Storage control • Server operating system: Windows Server 2022 • Central storage management and automated material flow management • Integration with TRUMPF production equipment • Connected production cells • TRUMPF TruLaser 5030 fiber (L76) • Machine type: CNC 2D fiber laser cutting machine • Working area: 3,000 x 1,500 mm • Laser source: TruDisk 6001, 6,000 W • CNC control: Siemens SINUMERIK 840D sl • TRUMPF TruMatic 6000 fiber • Machine type: Combined CNC punching and fiber laser cutting machine • Working area: 3,050 x 1,550 mm • Laser source: TruDisk 3001, 3,000 W • Maximum punching force: 180 kN • Linear tool magazine: 25 positions • TRUMPF TruBend Center 7030 (B34) – Cell 1 • Machine type: Automatic panel bending center • Max bending length: 3,123 mm • Max thickness: structural steel 3.0 mm; stainless steel 2.2 mm; aluminum 4.0 mm • Max box height: 220 mm • TRUMPF TruBend Center 7030 (B34) – Cell 2 • Same specifications as Cell 1 • System functionality (summary) • Central automated storage and retrieval of raw sheet material • Automatic supply of material to connected laser, punch-laser, and panel bending cells • Automatic transfer between storage and production stations • Centralized, high-capacity sheet handling • Main system configuration • 1 x STOPA Compact II automated sheet storage system • 1 x TRUMPF TruLaser 5030 fiber 2D laser cutting cell • 1 x TRUMPF TruMatic 6000 fiber punching and laser cutting cell • 2 x TRUMPF TruBend Center 7030 automatic panel bending cells Additional equipment • For TRUMPF TruLaser 5030 fiber (L76) • Automatic pallet changer • LiftMaster Compact 1530 (automatic loading and unloading) • STOPA storage connection/interface • For TRUMPF TruMatic 6000 fiber • SheetMaster 3000 x 1500 mm (automatic sheet handling) • GripMaster 3000 x 1500 mm • Storage system integration/interface • For TRUMPF TruBend Center 7030 (both cells) • 2-axis part manipulator • 5-axis rear stop • Rotary manipulator • ToolMaster Bend • Automatic loading and unloading • Storage interface • System-wide • Central storage management server (Windows Server 2022)

Condition: used, mileage: 309,650 km, power: 338 kW (459.55 HP), first registration: 01/2023, fuel type: diesel, empty load weight: 7,655 kg, maximum load weight: 10,345 kg, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 12/2026, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, Scania Approved, color: White, unladen weight: 7655 kg, permissible total weight: 18000 kg, tire size: 315/70 R22.5, 1st axle: , 2nd axle: , seats: fabric, interior color: anthracite, leaf-spring air suspension, retarder, digital tachograph, fifth wheel coupling: FISCHER SK-S36.20W 2/150, -660 mm, electronic braking system EBS, electronic stability program ESP, automatic climate control, auxiliary heater, adaptive cruise control ACC, LED headlights, headlight cleaning system, automatic driving lights, headlight range adjustment, hands-free system Bluetooth, rain sensor, adjustable steering column, sunroof, fog lights, exterior mirrors: electric and heated, curb mirrors, wide-angle mirrors, tire pressure monitoring system, axle load display, hill start assist, LED daytime running lights, connection plug: 1x15-pin, coasting function, telematics system, EGR, SCR, non-binding offer, subject to errors and prior sale. Image may not match the offer. Nedpfx Afezk Sb Eeweda

Condition: used, mileage: 346,400 km, power: 338 kW (459.55 HP), first registration: 01/2023, fuel type: diesel, overall weight: 18,000 kg, tire size: 315/70 R22,5, axle configuration: 4x2, wheelbase: 3,750 mm, next inspection (TÜV): 12/2026, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cruise control, differential lock, hydraulics, parking heater, Color: White, permissible total weight: 18,000 kg, tire size: 315/70 R22.5, 1st axle: , 2nd axle: , seats: fabric, leaf-air suspension, retarder, digital tachograph, fifth-wheel coupling: FISCHER SK-S36.20W 2/150, -660 mm, electronic braking system EBS, electronic stability program ESP, automatic climate control, auxiliary air conditioning, adaptive cruise control ACC, seat heating, LED headlights, headlight cleaning system, automatic driving lights, headlight beam adjustment, Bluetooth hands-free system, rain sensor, leather steering wheel, adjustable steering column, alloy wheels, sunroof, fog lights, electrically adjustable and heated exterior mirrors, curb mirrors, wide-angle mirrors, tire pressure monitoring system, immobilizer, central locking with remote control, cooler box, axle load indicator, hill start assist, LED daytime running lights, connector 1x15-pin, coasting function, telematics system, storage compartment, EGR, SCR, non-binding offer, errors and prior sales excepted. The illustration may not correspond to the offer. Nodpfx Aszwhq Nefwsda

Condition: excellent (used), Used steel hall, 36.5 x 13.5m, eaves height approximately 9.8m from finished floor level, gable roof with 3° pitch, top of rail for mounting bridge cranes approximately 8.5m above finished floor level. Originally, the existing hall had 2 x 10t cranes installed. Steel structure including roof and wall purlins, crane runway, 2 x 10t cranes – without wall panels, windows, and doors. As can be inspected on site. Base plates must be newly constructed by the buyer. Nsdpfjpqx I Hex Afwoda Price is for the hall as it stands at the location: 56759 Kaisersesch.

Condition: good (used), Year of construction: 1999, Brand: Werner Koch Technik GmbH Item number: Sm Heyuydwsqvjka Model: CKT 110 Year of manufacture: 1999 Dry air capacity: 110 m³/h Tank volume: 400 L Ndodpfjzuk T Isx Afwoa The dryer has recently been tested and is fully functional.

Condition: new, Year of construction: 2023, REF: MM5675 Vigo semi-automatic T-capping machine. Suitable for applying T-caps to 70cl and 100cl bottles.  Manufacturer - Vigo Ndsdpor I Ddkofx Afwsa Model - PG2010/TV SEMIAUTOMAT T-CAPPER.  Date of manufacture - 2023. Electric supply - 220 V / 50 hz / 1 phase. Supplied with manual, 1 x T stop corker adjustments for 2 x cap types (miniature and normal), 1 x Head and down channel for different “T” caps sizes and castors.  Purchased brand new in 2023 but never used.

Condition: excellent (used), power: 190 kW (258.33 HP), fuel type: diesel, color: yellow, Year of construction: 2017, operating hours: 10,650 h, Year of manufacture: 2017 Drive: Wheeled Number of cylinders: 4 Unladen weight: 65,000 kg Superstructure brand: LIEBHERR LH 60 M LITRONIC CE marking: yes Technical condition: very good Optical condition: very good LIEBHERR LH 60 M LITRONIC MATERIAL HANDLER – YEAR OF MANUFACTURE 2017 – 20 M REACH For sale is a powerful and excellently equipped Liebherr LH 60 M Litronic material handler from 2017, ready for immediate use in scrap, recycling, port, and bulk material handling. This reliable machine offers an impressive reach of 20 meters and is powered by a powerful Liebherr D944 A7-04 engine with 190 kW (258 hp). The robust undercarriage with 4-point support provides maximum stability, while the hydraulically elevating cab ensures excellent all-round visibility and high operating comfort. Equipped with an industrial straight boom Z1 of 9.10 m and an industrial, heavily angled stick of 6.80 m, this machine is ideal for demanding handling operations. Includes a 5-tine grapple and a multi-shell grapple with a capacity of 1.10 to 1.70 m³. Technical data Manufacturer / Model: Liebherr LH 60 M Litronic Year of manufacture: 2017 Ndodpfx Afszdb Dqowea Operating weight: 65,000 kg Reach: 20.0 m CE certified Engine: Liebherr D944 A7-04 Power: 190 kW / 258 hp Wheelbase: 3.40 m Ground clearance: 47.5 cm Undercarriage width: 3.53 m 4-point support Hydraulically elevating cab and 4th hydraulic function Industrial straight boom Z1 – 9.10 m Industrial, heavily angled stick – 6.80 m 5-tine grapple Multi-shell grapple 1.10 – 1.70 m³ Highlights ✔ 20-meter working reach ✔ Powerful and reliable Liebherr engine ✔ Hydraulically elevating cab for optimal visibility ✔ Including grapple equipment ✔ CE-certified machine ✔ Stable 4-point support ✔ Ready for immediate use ✔ Ideal for scrap, recycling, port, and bulk material handling Ready for Immediate Use The machine is in good working condition and ready for immediate use. For further information, photos, or to arrange a viewing, please do not hesitate to contact us. We speak German We speak English Hablamos Español

Condition: good (used), operation weight: 20,700 kg, lifting height: 3,940 mm, Year of construction: 2011, total length: 8,610 mm, total width: 2,980 mm, load capacity: 11,800 kg, machine/vehicle number: 3661, additional equipment features: Rear mud guards, Weight system, Warning triangle, Centralized greasing system, Front mud guards, Equipment: lighting, Volvo L110G from Uniktruck Nedpfjzvq Nfjx Afwoda

Condition: new, Year of construction: 2026, functionality: fully functional, The compact, lightweight conveyor is equipped with a high-speed carbon brush motor. It is easy to install and provides excellent vacuum. Removable, user-friendly controls. All conveyors are equipped with a fabric filter and automatic reverse cleaning. Carbon brushes with automatic shut-off for maintenance alarm. Control is possible via the SPV-U proportional valve controller. 360° mounting possible. Njdpfx Asqgdkbofweda All conveyors are equipped with a fabric filter and automatic reverse cleaning with alarm.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: Njdpjzimgtsfx Afweda approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 Material Testing Machine, 20 kN Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Machine Type: Servo-electric Material Testing Machine / Universal Testing Machine Max. Testing Force: 20 kN For sale is a used Zwick / Roell Z020 Allround-Line material testing machine with testControl II control system, industrial PC, and installed testXpert V3.5 software. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials, and is used in testing laboratories, quality assurance, research and development, and training. Technical Data: Manufacturer: Zwick / Roell Series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Max. Testing Force: 20 kN Testing Direction: Tensile and Compression Testing Space Height: 1,000 mm Crosshead Speed: 0.0005–1,000 mm/min Power Supply: 230 V / 50–60 Hz Power Consumption: 8 A Control System: testControl II Software: testXpert V3.5 Load Cell: Zwick / Roell Xforce P 20 kN Zwick / Roell Xforce P 2.5 kN Dimensions: Machine Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Machine Weight: approx. 212 kg Equipment: testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Accessories as shown in the pictures Shipping Data: Dimensions (W × D × H): approx. 1,244 × 690 × 1,324 mm Shipping Weight: approx. 212 kg Condition: Used Optical condition as shown in the pictures. Functional scope as shown in the pictures. Nameplates present. Scope of Supply: Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Testing fixture Connection and cabling Further accessories as shown in the pictures The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Availability: by arrangement. Nodpfxozra Rqj Afwjda Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.

Condition: used, mileage: 761,000 km, power: 331 kW (450.03 HP), first registration: 10/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania S450 4x2 tractor unit * Euro 6C * Automatic transmission Ndsdpozvubrofx Afwea * Retarder * Leaf-air suspension * Long-distance cab with 2 bunk beds * ACC adaptive cruise control * Lane departure warning system * Emergency brake assist * Differential lock * Alcoa aluminium rims * 2 tanks, 1200 liters (700/500) * Stationary air conditioning * Automatic climate control * Auxiliary heater * Heated seats * Refrigerator compartment * Xenon headlights * Multimedia infotainment navigation system * Electric windows * 1st owner * ADR EXII EXIII FL AT

Condition: used, mileage: 678,000 km, power: 331 kW (450.03 HP), first registration: 10/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, * Scania S450 4x2 tractor unit * Euro 6C * Automatic transmission * Retarder * Leaf-air suspension * Long-distance cab with 2 bunk beds * ACC adaptive cruise control * Lane departure warning system * Emergency brake assist * Differential lock * Alcoa aluminium rims * 2 tanks, 1200 liters (700/500) * Stationary air conditioning * Automatic climate control Ndodpfxszvuble Afwoa * Auxiliary heater * Heated seats * Refrigerator compartment * Xenon headlights * Multimedia infotainment navigation system * Electric windows * 1st owner * ADR EXII EXIII FL AT

Condition: ready for operation (used), functionality: fully functional, 1 x Watkiss Nearline Powersquare 224 - booklet-making machine, e.g., for Xerox digital printers / booklet maker Ready for immediate dispatch from our Flensburg warehouse - ideal for streamlined booklet production with Xerox, both on- and off-line. Counters: 1. Books: 1,109,917 2. Sheets: 8,905,801 3. Stitches: 2,735,224 E.g., suitable for: • Xerox iGen family • Xerox Nuvera family • Xerox Color 800i/1000i Presses • Xerox Versant 2100 • Xerox Color 8250 Nedpfx Afjwf Rxueweda Manufacturer: Watkiss Type: 224 Watkiss PSQ224 Main Body RA Watkiss Bridge Link R4 Watkiss Bridge Frame Cover Watkiss Power Stack 200, Book Stacker Watkiss PBS Care Kit Watkiss PSQ, 2-knife trimmer Watkiss P2T/PBS Interface kit Watkiss P2T/PBS Trim Conveyor kit Watkiss Travel Base The Watkiss PowerSquare 224 is a complete book-making system for digital and offset print applications, available in three configurations – online, nearline, or offline. In a single machine, it combines the four processes of stitching, folding, spine forming, and trimming to produce SquareBack books of up to 224 pages thick. It features fully automatic settings for different book sizes and pagination, including variable stitch-leg length for varying book thicknesses. For inline production, it works with all major digital print engine manufacturers (including Kodak, Canon, Konica Minolta, Xerox, and Ricoh) to deliver seamless booklet-making solutions for production printing. Designed for high production reliability and ease of use, it can handle long runs without any operator intervention. It offers a maximum book thickness of 0.39” (using 50 sheets of 80 g/m2 paper) and provides a single book-making solution for documents from 8 to 224 pages. Duty Cycle: • Average volume: 50,000 books per month • Peak volume: 150,000 books per month Frequency: 50 Hz. Books/Booklets printed: 700 (from Xerox Showroom) Installed: June 5, 2015 Availability: available now Video link below Inspection welcome Tested and working – serviced regularly throughout its lifespan and very well maintained. Business-to-business sale only. Inspection welcome in northern Germany. Comes with a manual in English.

Condition: used, Winding and unwinding mandrel OBRU, type HM Order number 66239, year of manufacture approx. 1970 Coil weight 80 kg Coil width max. 200 mm Coil inner diameter 270 - 450 mm Coil outer diameter max. 650 mm Center of mandrel shaft to mandrel base 720 mm Mandrel speed 16 rpm Motor power 0.18 kW Mains connection 380 volts, 50 Hz Nedpfszt U Iyox Afwsda - Coil support by 4 cantilever bolts - Central spreading of the 4 support bolts via eccentric rotating lever - Gear drive via geared motor - Mechanically adjustable slip clutch - Height adjustable by clamping to the support column - Motor circuit breaker Dimensions L x W x H 960 x 650 x 1100 mm Weight 110 kg Good condition

Condition: used, power: 175 kW (237.93 HP), fuel type: diesel, Year of construction: 2014, operating hours: 11,094 h, Atlas 350 MH – Long-reach – with grab, swivel, and magnet function – Hydraulic cab – 4 supports – Total weight 33,500 kg – 11,094 operating hours – = Further information = Year of manufacture: 2014 Model year: 2014 Drive: Wheeled GVW: 33,500 kg CE marking: Yes Reference number: 51 Ndjdpjzt D Trefx Afwea = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: used, power: 125 kW (169.95 HP), fuel type: diesel, Year of construction: 2012, operating hours: 14,463 h, Atlas 270 MH – Long-reach – with grab, swivel, and magnet functions – Hydraulic cab – 4 stabilizers – Total payload: 29,500 kg – 14,464 operating hours = Further information = Nsdpfxezt D Tlo Afwoda Year of manufacture: 2012 Drive type: Wheeled GVWR: 29,500 kg CE marking: yes Reference number: 52 = Company information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 a.m. to 7:00 p.m.

Condition: used, Year of construction: 2015, Biesse Uniline 4500 CNC processing center (i.e. for window & door frames) Ndjdpozp Hbqofx Afwoa Description Biesse Uniline 4500 Machine nr; 1000004833 Year of construction: 2015 Machining lengths: 175 - 4,500 mm Number of milling motors: 1 Motor power: 19.2KW (25.7HP) Label printer: No Tool holder: HSK 63F Changer type: Fixed + movable Number of positions in toolchanger: Flexstore total 44 Software: BiesseWorks Office licenses: 1 x Fencing: Yes complete (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland