Used Production Of Construction Materials for sale (44,876)

Year of construction: 2022, condition: used, Serial number: ecxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21648 Lhjdpexq Dmyefx Ahzjb Description: We have an Eco-clipper ec-gen lawn mower for sale. The full cutting width of this mower is 6.15 metres. Efficient mowing machine designed for professional use on large areas. Works well even in wet conditions. Ready for delivery Model: ec-gen gressklipper

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Lsdpfxox Up Igo Ahzjhb Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: used, functionality: fully functional, Item: DP-0601-Pump APV W+30/80 Lodpfx Aox Tuu Ashzshb APV - Centrifugal pump Brand: APV/SPX Type: W+30/80-3220 130 Motor: 4.0 kW Speed: 2860 rpm Year: 1997 Inlet: 4" / Outlet: 3"

Condition: excellent (used), Year of construction: 2015, operating hours: 11,202 h, Equipment: air conditioning, Applicable material: Waste Drive: Wheel Empty weight: 23.200 kg Make of engine: CAT CE mark: yes Technical condition: very good Visual appearance: very good Production country: FR Please contact Nedtrax B.V. for more information Caterpillar MH3022 Year 2015 11202 hours* * *CE* Caterpillar MH3022 Year: 2015 Reading hours: 11202 h Weight: 23200KG Lhodpsyc Dkqsfx Ahzeb 129.4KW C7.1 Acert Airco/Klima camera Hydraulic elevated cabin Cabin protection central greasing 4 Outriggers CE-MARKED In good condition

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox PrimeLink C9070’ Object of sale: 1 x Xerox PrimeLink C9070 with the following equipment: incl. Fiery Server EX C9065 incl. Paperdeck A-CF01 incl. booklet finisher A-FN13 incl. SquareFold with front trim incl. Vivid kit for changing. Colours: White, gold, silver, transparent incl. fluorescent kit for changing colours. Colours: fluorescent cyan, magenta, yellow Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,189,345 pages Colour: Approx. 1,049,230 pages Black: Approx. 140,115 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Ljdpfx Ahevtycyszshb Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h Lhsdpox Td Ilsfx Ahzjb -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Year of construction: 2011, condition: used, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20426 Specifications: - 2011 model - 845 kg - 9.6kW - Max lifting capacity of 140 kg - Ready to ship Description: We have a 2011 Hinowa TP2000 Vacuum lifter for stone slabs for sale. Everything works as it should according to the owner. Efficient vacuum lifter that makes the job much easier for the gardener who will carry out the job. Ready to ship Own weight: 845 Total Weight: 845 Kw: 9.6 Model: TP2000 Vakumløfter til steinheller Lodpfowi Rxisx Ahzehb

Year of construction: 2022, operating hours: 503 h, condition: used, Serial number: 32228478-00520-0xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20427 Specifications: - 2022 model - 503 hours - Lifting capacity of 150 kg - Aggregate - Vacuum - 8.5 kW - Forks - Rubber tracks - Ready for delivery Description: We have a 2022 150 DA silent xl Vacuum lifter for stone slabs for sale. The machine works as it should and only has 503 hours on the counter. Efficient vacuum lifter that makes the job much easier for the gardener who will carry out the job. Ready for delivery Hours: 503 Ledpfxewi Rkre Ahzohb Own weight: 1689 Kw: 8.5 Model: 150 DA silent xl Vakuumløfter til steinheller. SE VIDEO

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21271 Specifications: Extended feed bar, for 14 foot first rod, effective drilling length of 4.2 mp 1 rod. Hose reel construction for better hose handling Upgrading hydraulics for better capacity and energy efficiency Rod handling with 1 rod, drill length up to 7.5 meters New radio control New control system In-cab display for pressure adjustment and monitoring Directional instrument and meter counter HC25 hammer Rod shifter Ledpfjxatp Aox Ahzehb Ready for delivery   Description: We have a Montabert micro drill rn significantly upgraded w/ hc25 hammer and rod changer for sale. The tower has been significantly upgraded to function as it should. The feed beam has been extended to accommodate a 14 foot 1-rod. Which effectively makes the drilling length 4.2 mp 1-rod. Rod changer for 1 rod (12 feet) increases drilling length to 7.5 m. Compressor hydraulic valve can be included for an additional price. The tower is ready for delivery. Own weight: 1 Model: micro borretårn betydelig oppgradert m/ hc25 hammer og stangskifter

Year of construction: 2024, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21861 Lhsdpjxyptkofx Ahzjb Specifications: 2024 model 0 hours Not used 380 volts/ 50Hz Ready for delivery Description: We have a 2024 Endustri GM dust filter for sandblasting for sale. Everything works as it should and above all it is like new. It has not been used. Ready for delivery Own weight: 1 Model: GM støvfilter for sandblåsing

Year of construction: 2021, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 20825 Specifications: - 2021 model - 2000 liters - Hydraulic pump - Hydraulic hoses - Hose reels - Ready for delivery Description: We have a 2021 Simed NCS 2000 Hydraulic washer of 2000 liters for sale. Everything works as it should according to the owner. Has previously been on a Durso multimobil X. Lodpfx Ahjwwgniozjhb But can also be used for other vehicles. Ready for delivery

Year of construction: 2020, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 19238 Specifications: - 2020 model - 380 hours and 830 hours - Pump is Atex and EX approved - DNV 2.7.1 Containers - Volvo Motors - Light - Ready for delivery Description: We are talking about 2 identical pumps, both of which have conversion kits. Set 1: 2500 bar 40l/min Set 2 1000 bar 100L/min The pump has been running for 380 hours and 830 hours, respectively The pumps are Atex and EX approved according to Zone 2 offshore use The pump is built in DNV 2.7.1 containers Lsdpsvg Abxofx Ahzshb We have machine card on one machine It includes various sensors for the machine, which are fully encapsulated in ex enclosures. Ready for delivery. Own weight: 1 Model: 2 stk 2020

Year of construction: 2019, condition: used, Serial number: 1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19694 Description: 2019 Vama EHK2200 wheel loader broom for sale. Everything works as it should, according to the owner. It's also good with brush left on it. Lodpfx Aovyfa Dshzjhb There are 2 water tanks with nozzles to reduce dust when sweeping. Ready for delivery

Year of construction: 2022, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 22090 Description: We have a 2022 LLOYD RS8-14 sale drawer w/ s50-60 combi attachment for sale. Everything works as it should, according to the owner. Can be delivered around the corner. Own weight: 1 Model: RS8-14 soldeskuffe m/ s50-60 kombifeste Lhjdpfx Ahjx I U T Uszjb

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 22020 Description: Lhodpfx Ajx E Nmdehzeb We have an Atlas copco 550 spike hammer for sale. Everything should work as it should according to the owner. It comes with an extra spit and gas filling equipment. Fits S50 and S60 mounts. Ready for delivery

Year of construction: 2000, condition: used, Serial number: 20xxxx Please contact ATS Norway for more information Please provide reference number upon request: 22038 Specifications: 2000 model Toilet Shower Wash Water heater The kitchen Living room Ready for delivery Description: We have a 2000 20-foot container with toilet, shower, sink, water heater, kitchen and living room for sale. Everything works as it should according to the owner. But there may be errors and shortcomings as it is from 2000. So something on the diet can be counted on. Lhsdpfxex Hnxbe Ahzeb Ready for delivery

Condition: used, Serial number: 24-0xxxx Lhjdpfx Ahsxypqcjzjb Please contact ATS Norway for more information Please provide reference number upon request: 21860 Description: We have a Pitsan ER80 paint filter for sale. This is used for larger painting/varnishing projects to provide better ventilation. Ready for delivery Own weight: 1 Model: ER80 malefilter

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed Lsdpfx Aox A U Ncohzshb • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: good (used), Year of construction: 2009, operating hours: 15,100 h, Year of manufacture: 2009 Field of application: Construction Drive: Wheel Empty weight: 21.000 kg CE mark: yes Technical condition: good Visual appearance: good Ljdpfx Aox Hk S Rjhzehb Please contact Ferdinand Pater for more information

Condition: good (used), power: 135 kW (183.55 HP), fuel type: diesel, color: green, Year of construction: 2007, operating hours: 12,287 h, Year of manufacture: 2007 Drive: Wheel Empty weight: 27.500 kg Dimensions (LxBxH): 1110 x 275 x 330 cm Technical condition: good Serial number: 825.0.1055 Please contact Ferdinand Pater for more information Stock no. D33 Machine Brand Sennebogen Type: 825M D-series Weight: 28 Ton Serial number: 825.0.1055 Building year: 2007 Worked hours: 12287 Engine: Deutz TCD 2012 L06 2V 135kW Engine no. 10371260 Lhjdpst Dlxkjfx Ahzjb Boom: K13 configuration, Boom = 7,4 m. and Stick = 5,8 m Safety check valves on boom and stick cylinders Cabin: Maxcab D270, Hydraulic Cab Riser, 2,7 m. in height. Upper carriage: Standard Sennebogen color, central greasing system Undercarriage: Mobile MP26, 4 points outrigger, 8 full rubber tires 10.00-20 Lights: Several lights on boom, stick and cabin Extra: Generator set Dimentions: LXBXH 11,10X2,75X3,30

Year of construction: 2024, condition: used, New: Yes Lsdsyaf Sqepfx Ahzohb Empty weight: 35 kg Serial number: 9305082 Transport dimensions (LxWxH): 0,51x0,2x0,85 Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or DPX Power for more information New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A. Completely wired 2 units available

Condition: used, Number of machnines 9 Stk. Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - ??6 spindles, 5 of which are PowerLock - 8,000 rpm - Equipment for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and molding tools - Linked to a Maweg Saturn Duo single-piece wood sander, year of manufacture 1985, Lhsdpfx Ahsyclwxszob and a workpiece return conveyor system Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - ROTATEN: Angled window attachment - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the systems listed and drawn. (Technical specifications according to the manufacturer, without guarantee!) -----...

Condition: used, Wooden window production line for sale on behalf of a customer. Machines still in operation can be viewed. Sale includes machines, tools, and programming of the systems produced. Includes angled window and arched window production. Item 1: Weinig Powermat 500, year of manufacture 2010, window version ----- - ??6 spindles, 5 of which are PowerLock - 8,000 rpm - Equipment for glazing bead removal - Large PowerCom control system - Includes existing Leitz planing and molding tools - Linked to a Maweg Saturn Duo single-piece wood sander, year of manufacture 1985, and a workpiece return conveyor system Item 2: SCM Windor 40 R window system, year of manufacture 2006 ----- - 2 long CNC-controlled slotting spindles - 3 long CNC-controlled profile spindles + top and bottom unit - Rebating carriage for small sashes - ROTATEN: Angled window attachment - Includes Leitz window and door tools - Includes separate OKOMA UF 3 rebating machine with tools Item 3: HOMAG CNC machining center BMG310/42/F/K, year of manufacture 2018 ----- - Gantry machine, 5-axis Drive 5C+ with 15 kW - Ceiling laser - Working dimensions 4200 mm length, 1350 mm depth - 32-position disc changer - 8-position linear changer - Fixed drilling head with 18 spindles V12/H6/S0/90 degrees - 8 consoles - 6 lifting rails - Connection for 8 PowerClamp clamps - Approx. 30 vacuum clamps - 4 x PowerClamp clamps - WoodWop - Chip conveyor belt - Various small solid wood clamps, used for casement windows - Including Leitz tools for Homag with arched window production - Including Barbaric vacuum lifter, year of manufacture 2015 Item 4: Löwer MZP 1 mini dovetail press ----- - ??For arched window production Item 5: S+S frame press type Bavaria 200 L, year of manufacture 2014 ----- - Working dimensions 4000 x 2600 mm - With center pressure beam and cross pressure device - Motorized width adjustment - Basic equipment counter profiles - Slanted window control - Pendulum pressure plates + extension for pointed windows - Intermediate insert for small-scale crimping - Various carrier plates for counter profiles and counter profiles Item 6: Striffler sash fitting table ----- - With automatic screwdriver and screw feeder - Fitting rack - Punch for Roto fitting Item 7: Stegherr KF counter milling machine ----- - With existing tools Item 8: Tools ----- All tools belonging to the machines for the wood+wood-aluminum systems IV 72 + 92 mm shown in the PDF - Windows - Lift-and-slide doors - Round and angled windows - Box windows - Entrance doors in many variations - Putty rebate variations - ... Sale of the tools in their current condition, scope, and with accessories as they are currently available. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually present correspond to the systems listed and drawn. Lhodpfoyclwfsx Ahzeb (Technical specifications according to the manufacturer, without guarantee!) -----...

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 Lodpfx Ashlnzkshzshb double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm Ledpfx Ahsd N H A Nozohb weight of the saw approx. 1400 kg good condition