Used Profile Cleaning for sale (10,859)

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Kdsdoi Duh Iepfx Am Eek Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece Kdjdeh A S Htjpfx Am Ejk form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Kedpfshbal Dsx Am Eodk Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 081001, WOODWORKING TENONING MACHINE WITH AUTOMATIC FEED, 4 OPERATIONS Brand: VERTONGEN Model: PENTHO C 4 B Serial No.: 081001 Year: 2001 (Photos taken prior to overhaul, functional testing & cleaning) Automatic cycle woodworking tenoner with manual operator group selection and fine adjustment. MACHINING CAPACITIES: - Max. wood section (thickness x width): 135x230 mm - Max. cutting height: 135 mm MACHINE CONFIGURATION: Table: - Cast iron table 400x600 mm, tiltable up to 60°, positioning by clamping - 2 pneumatic hold-down clamps for wood clamping - Extendable metric stop ruler with double stop, anti-splinter profile, and end support 1) Sawing: cross-cutting - 2.2 kW (3 HP), blade speed 3,000 rpm - Saw blade Ø400 mm, bore Ø30 mm - Cutting depth adjustment 140 mm 2) Top and bottom planing cutterheads with carbide knives: Ksdpfx Ajwxdb Nom Ejdk - Cutterhead with W3 carbide knives, Ø160xL140 mm - Top head 3 kW / bottom head 2.2 kW, rotation speed 4,500 rpm - Independent manual fine adjustment for withdrawal or positioning: Top cutterhead axial movement: -40/+35 mm, vertical travel 0-135 mm Bottom cutterhead axial movement: -40/+10 mm, vertical travel 0-80 mm 3) Spindle moulder: - Power 5.5 kW, speed 4,000 rpm - Spindle Ø50 mm, useful length 160 mm - Vertical travel 150 mm, horizontal travel 130 mm - Max. tool diameter (tenoning discs) Ø350 mm 4) Shoulder head (cutterhead) for left and right operation: - Power 2.2 kW (3 HP), speed 4,500 rpm - W3 carbide knife cutterhead Ø160xL140 mm - Manual fine adjustment for withdrawal, positioning, and travel OTHER TECHNICAL FEATURES: - Main power supply: 3-phase + N + PE, 400V, 50Hz - Installed power: 15.1 kW (20.5 HP), rated IN 30A - Counters for manual operational adjustments - Pneumatic supply: 6 bar working pressure (for hold-downs) - Dust extraction ports and recommended airflows: 360 (saw) + 2500 (cutterheads) + 1250 (spindle moulder) + 2500 (shoulder head) m³/h Air velocity 25-30 m/s Manifold supplied, 1 connection, flanged edge 280 mm. If shoulder operation is used, provide for branching: 160F/150F/150F flex hoses - CE marking, automatic retraction of guards, braked motors, padlockable main isolator, emergency stop buttons Transport dimensions (LxWxH): 3.70 x 1.70 x h.2 m Weight: 1650 kg

Year of construction: 2019, condition: ready for operation (used), An automatic Munder blow-off system for cleaning cylindrical air filter cartridges is available. Compressed air supply: 6bar-8bar, quality: 5, nozzle pressure: 6bar, volumetric flow rate: 190m³/h, vacuum: 20kPa, max. filter height: 1400mm, max. filter diameter: 540mm. Documentation available. An on-site inspection is possible. Expected to be available June 2026. Ksdpfjyuyu Nex Am Eedk

Condition: excellent (used), functionality: limited functionality, Year of construction: 2007, actuation type: hydraulic, number of rollers: 3, shaft diameter: 60 mm, roller diameter: 224 mm, overall weight: 980 kg, Equipment: documentation/manual, emergency stop, foot remote control, SAF DS 80 HP Three-Roller Pyramid Profile Bending Machine Used. Year of manufacture: 2007 “CE”. Immediate availability unless previously sold. Operation and maintenance manual included. No. 03 driving rollers. Hydraulic. Smart position indicator. One-piece tilting base. Kdsdjyw Nh Eopfx Am Ejk Hydraulic adjustment of bending roller. Universal standard rollers. Shaft diameter: 60 mm. Roller diameter: 224 mm. Shaft center distance: 160 mm. Profile bending capacity: 140 x 130 mm 85 x 20 – 100 x 12 mm 50 mm square 80 x 80 x 8 mm Motor power: 5.5 kW. Weight: 980 kg. Set of rollers supplied for round bending, in various diameters: Set diameter: 22 mm Set diameter: 34 mm Set diameter: 48 mm Set diameter: 62 mm

Condition: new, connected load frequency 230 V Kdjdpfxjynnkrs Am Eek battery 24V / 200Ah Brush diameter 510 mm tank capacity 50 / 50 Liter weight 90 kg range L-W-H 1,0 x 0,6 x 1,0 mm RTE Floor Cleaning Machine: - with drive system - battery charger - working capacity 2000 m²/h - suction width: 850 mm - cleaning width: 510 mm - fresh/wastewater tank volume: 55/60 L

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 Kedjfrztfopfx Am Eodk Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets.

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device Kdsdpfxehx Halj Am Eek - Anti-tip device and forklift pockets.

Condition: new, 35 (600) mm 35 (900) mm Ksdpjfv H Etsfx Am Eedk L-beam 50 x 50 x 5 (800) mm T - beam - web outwards 60 x 7 (600) mm Axis diameter 50 mm work speed 4,5 m/min total power requirement 1,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. 1,1 x 0,8 x 1,5 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Tauring, controller model: digital readout, number of rollers: 3, shaft diameter: 70 mm, roller diameter: 245 mm, pipe diameter (max.): 100 mm, tube wall thickness (max.): 6 mm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Profile bending roll Tauring Alfa 70H2 year 2003 -Hydraulic section bending machine with digital readout -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Kdedpfoyx Dg Sjx Am Eek Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200 tube and profile roll, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Delsy, controller model: MG Touch Pro 15", pipe diameter (max.): 273 mm, tube wall thickness (max.): 20 mm, bending angle (max.): 200 °, number of axes: 9, working height: 2,200 mm, overall weight: 27,000 kg, total length: 2,850 mm, total width: 2,950 mm, total height: 2,930 mm, power: 29.42 kW (40.00 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 240 bar, number of digital displays: 6, Equipment: documentation/manual, emergency stop, Profile bending machine model AR200 brand MG srl year 2016 Capacity chart of the machine in enclosed. Model AR200 Pipe bending roll NR. 2 set of rollers for pipe bending SIZE 159MM - SIZE 139,7 MM Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft Kdedpfx Amsyx A Uuj Eok -side arms left/right side hydraulic move in 3 direction keeping aligned the profile being formed. -Control panel console NC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling available for bending section HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE - see capacity chart in enclosed ..

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 450 kg, input voltage: 400 V, total length: 900 mm, total width: 850 mm, total height: 1,700 mm, Technical Specifications Material: round / rectangular tube: 70 × 2 mm / 60 × 60 × 3 mm Material: round / square bar: 35 mm / 35 × 35 mm (diameter) Roller diameter: 50 mm Motor power: 2.2 kW Power supply: 3-phase, 400 V Dimensions (L × W × H): 900 × 850 × 1700 mm Weight: 450 kg Delivery Terms Kodoytffwspfx Am Eedk The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Year of construction: 2014, operating hours: 5 h, condition: like new (used), functionality: fully functional, grinding spindle speed: 16,000 rpm, IMT Spindle Type DRESS 72 - 37 - Absolutely like new For truing profile grinding wheels, incl. motor connection cable and spindle bracket. According to the manufacturer, highest precision and smooth running during the truing process of CBN grinding wheels. HF Spindle Dress 72 - 37 Spindle housing: 72 mm Speed up to 16,000 rpm (clockwise/counterclockwise) Power S1 100%: 0.5 kW from 11,500 rpm Power S6 40%: 0.8 kW from 11,500 rpm Motor type: Asynchronous, 3-phase Number of poles: 4-pole Power consumption: Voltage: 230 Volt Current S1 100%: 2.0 Ampere Current S6 40%: 3.5 Ampere Current (max): 6.0 Ampere Frequency up to 533 Hz Spindle ball bearings: Hybrid ceramic Bearing lubrication: Lifetime grease-lubricated Cooling: bracket cooling Purge air + labyrinth: 1 bar, approx. 50 l/min Temperature monitoring: PTC Tool holder: Ø 40 h2 Manual tool clamping Electrical connection (motor): 8-pin plug Axial supply connections Weight: approx. 4.7 kg Motor cable: 8+PE KD /-.10 Spindle bracket 72 complete Aluminum, black anodized Kjdpegl Arrjfx Am Ejdk Reducing sleeve 80 / 72 Dressing spindle for mounting dressing rolls on CNC grinding machines Profiling in grinding wheel Operating instructions available Spindle was used for trials on the machine. Price / details upon request. All technical data subject to error/typos. Sale exclusively to countries of the European Community.

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Kodpjxyu Itsfx Am Eodk

Condition: used, This listing is for a Microwave Laboratory Systems MLS Milestone traceClean The traceCLEAN operates as a fully automated, self-contained acid steam cleaning system. Items to be cleaned are placed inside the unit, where freshly distilled acid vapors (typically nitric or hydrochloric acid) are generated and continuously refluxed within a sealed chamber. This process effectively leaches any metal contaminants from the surfaces of the items. After the cleaning cycle, the items are cooled, dried, and stored until needed Kdedpsxzh E Uofx Am Eok

Condition: as good as new (ex-display), Year of construction: 2022, 1.0 ft. Ultrasonic Cleaning Device Manufacturer: AIR FRESH SERVICE INDUSTRIEFILTER Type: 1-Chamber Cleaning System Kjdpfx Amov Nztxo Eedk Inner Tank: 750 x 600 x 770 mm Year of Manufacture: 2022 THIS DEVICE HAS NEVER BEEN USED.

Condition: ready for operation (used), Year of construction: 2007, A Schüco roll crimping machine for joining aluminum half-shells with polyamide insulating bars in thermally broken profiles is available. Profile throughput speed: approx. 34m/min, max. profile installation depth: 250mm, max. profile height: 400mm, max. insulating bar spacing: 300mm, machine dimensions X/Y/Z: approx. 900mm/900mm/1650mm, weight: approx. 750kg. Including infeed and outfeed. Documentation available. An on-site inspection is possible. Kedpoyugm Eofx Am Eedk

Year of construction: 2024, condition: new, Trolley for carriage and storage of profiles in vertical position COMALL CARR 300 Q, new Technical specifications: - 10 compartments with working size 128 mm - Contact surfaces coated with non-scratch and shock-proof plastic material - 4 wheels Ø 125 mm, 2 of them with locking device - Arms adjustable in 5 different positions Kdodpfx Asf Nk H Hjm Esk - Rubber-coated supporting table - Loading: 650 Kg

Condition: good (used), functionality: fully functional, Year of construction: 2005, It is important to know that a total of two welding machines and two CNC corner cleaning machines are available, comprising two complete production lines. The machines are operational and still in daily use. CE Conformity: Yes (CE marking on the machine) Power supply: 400 V Frequency: 50 Hz Current connection: 25 A Main switch: Industrial main switch with safety interlock Kodpfx Amsyyavre Esdk Operating air pressure: 7 bar Main components - 4 welding heads - Linear motion system - Profile clamping units - Welding plate system - Pneumatic press units - Electronic temperature control - Central control unit - Safety light curtain Operation Profile clamping – Insertion of the heated welding plate – PVC melting – Application of welding pressure – Welding cooling – Removal frame The system operates semi-automatically/automatically. ``` Includes: - Automatic head positioning - Pneumatic clamping system - Digital temperature control - PLC control - Operator panel and industrial PC Control system Industrial PC control Safety system - Light curtain - Emergency stop button - Safety covers - CE conformity Powered up in Hungary, the system can be dismantled and delivered in approximately June.

Condition: good (used), Year of construction: 1962, Manufacturer: VEB Type: RV16 Kedpfx Amjltiy Te Esdk Machinable cross-section: 120 x 140 mm Weight: 2,7 t

Condition: new, Year of construction: 2026, Long knife profile grinding machine, grinding area 1800 x 250 mm, spindle power 40 KW, with swivel magnet and clamping device, table dresser, automatic cooling nozzle adjustment, grinding wheel 500 x 150 x 203 mm, very powerful machine, we would be happy to send you further details, we look forward to your grinding task, delivery time for new machine approx. 9 months. Financing / leasing, no problem, we would be happy to make you an offer! Kdedpfx Amjh H Stre Esk

Condition: excellent (used), functionality: fully functional, Comec FXT Double-Sided Milling Machine Number of milling units: 4 Unit arrangement: Right/Left/Top/Top Milling unit power: 4×0.85 kW Spindle speed: 12,000 rpm Feed speed: adjustable via variator Kodpfx Ameyxm R Hj Eodk

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Kjdpfx Ajx Sx R Sjm Ejdk Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

Condition: new, Year of construction: 2025, The Senfeng T series profile lasers are Senfeng's entry-level model for processing profiles. The machine frame can be equipped with a wide range of jaw plates and machine bed lengths. The machine can also be equipped with a 2.5D cutting head or 3.0D (Bevel) cutting head. With Senfeng we offer fiber lasers at a competitive price with service from our own mechanics. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. Technical data: - Laser Power: Up to 6,000 watts - Laser Wave length: 1020 nm – 1080 nm - Maximum tube length: up to 15200 mm - Maximum profile weight: depending on the jaw plates and length of the machine bed - Tube cutting capacity: Ø 8-350 mm - Tube cutting capacity: 8x8 - 350x350 mm - Chuck rotation speed: Depending on the jaw plates - Axes speed: Depending on the jaw plates - Operating voltage: 400V / 50Hz ± 5% - Tailing (residual material): 70 mm - Cutting gases: Oxygen, Compressed air, Nitrogen Kdodpsvvh Ngsfx Am Eek ===== In addition, the machine is equipped with the following options: - Control: TubePRO - Follow-up supports controlled by a ball screw. This means that unequal profiles are continuously supported and you can process material more accurately - Valve for collecting small pieces. This is opened and closed in the control with an air cylinder - Pneumatic jaw plates, for fast and precise clamping - Various automations possible - Aviation aluminum beam - Laser source: Max Photonics or IPG - Cutting head: Depending on power - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure), and Air (high pressure with reducer for low pressure) - Water cooler - Power stabilizer - Automatic lubrication unit