Profile Shear Mubea HIW 550

Mubea HIW 550-305

Condition: used, Year of construction: 1991, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN Cedpfod Ih Stsx An Nogu throat 305 mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Year of construction: 2008, condition: good (used), machine/vehicle number: 431808, Lg.No. 18177 Hydr .flat profile and bar shear with notching device and hole punching machine Technical data: - Flat steel shear cuts up to 375 x 10 mm - 220 x 20 mm - section steel shears - cuts L-steel at 90° up to 130 x 13 mm - steel bar shears - cuts round steel up to 45 mm Codpfx Anemidyis Nogu - square steel up to 45 mm - notching device - with square notcher 100 x 42 x 10 mm - punching machine - punching force 600 KN - with stop table - throat 300 mm - punching in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - drive 400 V / 4 kW - space requirement approx. W 600 x H 1550 x D 1500 mm - weight approx. 1300 kg

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Cgedpfxov Ip Sgs An Nju

Condition: new, pressure: 60stroke: 250total power requirements: 4weight approx.: 800messurements (LxWxH): 1.710 x 700 x 2.100Technical DataPress force: 60 tons Motor power: 4 kW Stroke: 250 mm Clear distance between columns: 1,040 mm Piston Ø: 180 x 120 mm Cgedpfxsd Ab Iqj An Nsu Feed speed: 8 mm/s Working speed: 4 mm/s Return speed: 10 mm/s Length: 1,710 mm Width: 700 mm Height: 2,100 mm Weight: 800 kg EquipmentSteel welded construction Any stop position Pressure gauge Safety valve against overload 2 V-prisms Height-adjustable table Table up/down device Control with operating lever Manual right/left cylinder movement Equipment according to CE regulations, operating manual in German and English

Condition: new, Year of construction: 2025, Hand-held laser welding machine Fiber Innovation Laser Laser power: 1500W - 3000W 2-year warranty. Warranty and post-warranty service included. Stock of spare parts and consumables maintained. From order to commissioning in as little as 5 working days. The hand-held fiber laser welder is a modern alternative to TIG and MIG/MAG welding, designed for both thin and thick materials. Compared to conventional methods, laser welding delivers up to 4x faster cycle times, significantly reduced heat distortion, and welds that require no additional post-processing. Welding thin aluminium and stainless steel is straightforward and repeatable — unlike TIG, which demands a highly experienced operator. The machine supports single or dual wire feeding, enabling larger gap bridging and a wider weld bead when needed. Technical parameters (1500W / 2000W / 3000W): - Laser wavelength: 1070 nm +/-10 nm - Maximum power consumption: 8 kW / 10 kW / 13 kW Cedjt Al Txopfx An Negu - Cooling system: water-based - Operating voltage: 400V 16A / 400V 32A / 400V 63A - Penetration depth: 0.2-2 mm / 0.2-3 mm / 0.2-4 mm - Dimensions: 1000 x 450 x 750 mm - Weight: 80 kg / 90 kg / 100 kg The price includes: - Integrated water cooling system - Raycus laser source - Touch screen with Polish-language menu - Ergonomic plastic welding head - Single / dual wire feeder (optional) - Instruction manual in Polish\English - CE Declaration of Conformity Weld samples can be produced on request for the customer's specific workpiece material. Machines are available in various configurations, working ranges and laser power outputs. The listed price applies to the CX-CS1500-H (1.5 kW) model with single wire feeder. Actual appearance of individual components may differ from images shown.

Condition: new, functionality: fully functional, Year of construction: 2023, New Sunrise punch cutting machine IW-45K available from stock. Specifications IW-45K tonnage 45ton punching capacity ᴓ 22x15mm/ᴓ 40x8mm discharge 165mm angle bar 75x75x6mm 90⁰ strip 300x10mm Weight 870 KG Dimension 1050x760x1490mm Cjdsvf I Ibspfx An Negu Multiple models available from stock.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0168091277886, Offer 23294 Hydr. combined flat and profile steel shears with notching device and hole punch Technical data: - Flat steel shears - blade length 470 mm - for flat material 450 x 15 mm - or 300 x 20 mm - Profile steel shears - L-steel at 90° 140 x 13 mm - at 45° 70 x 7 mm - T-steel at 90° 70 mm - Steel bar shears - round steel 50 mm Codpfxjrll I Uj An Nogu - Square steel 42 mm - Notching device - rectangular notching 52 x 90 x 12 mm - Hole punch - Punching force approx. 750 KN - Infinitely variable stroke 0 - 70 mm - punches holes in steel up to 30 mm Ø in 20 mm - throat 310 mm - Hydraulic drive 400 V / 7.5 kW - Space requirement approx. W 1600 x H 1850 x D 1400 mm - Weight approx. 2400 kg - with: - 2 E. foot pedals for two separate work stations - Turntable

Condition: new, Hydraulic - sectional steel shears LFSS Typ. HKM 60 - 5 stations Including MUBEA - punch and die holder Including Ringsland - punch and die holder ::: PUNCH ::: Ø / sheet thickness: Ø 28 mm / 15 mm, Ø 38 mm / 11 mm, Ø 110 mm / 3 mm Csdpfx Anogiplnj Nsgu stroke: 55 mm number of strokes (20 mm): 26 / min throat: 220 mm Working height: 940 mm ::: STEEL SHEARS ::: Capacity round: Ø 40 mm capacity square: 35 mm ::: ANGLE SHEARS ::: Capacity 90°: 120 x 120 x 12 mm capacity 45°: 80 x 8 mm working height: 1140 mm ::: PLATE SHEARS ::: capacity: 200 x 20 mm, capacity: 300 x 15 mm, cutting length: 317 mm cutting with angle: 80 x 10 mm, working height: 940 mm ::: CUT-OUT ::: thickness: 10 mm, width: 42 mm, depth: 100 mm Working height: 940 mm Capacity: 60 to., Motor power: 4 kW, Voltage: 400 V Weight: 1440 kg Dimensions (LxWxH) 1520 x 950 x 1780 mm

Condition: used, Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: Csdpsf Ek H Usfx An Nogu -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Year of construction: 1988, condition: excellent (used), Hydropneumatic intensifier Foot valve operated Max. daylight = 280 mm Dimension 60 x 850 x 1500 mm Csdpfxsfitbws An Nsgu Weight 300kg