Used Profile Milling for sale (14,359)

Condition: good (used), Year of construction: 1999, Used conventional milling machine from FortWorth Model U 500 / CS-H-500 Table 1500 x 300 mm X axis 1050 mm Y axis 320 mm Prodpfx Ajx I Axfeh Uef Z axis 470 mm Spindle taper ISO 40 Heidenhain 3-axis digital readout

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,400 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, spindle speed (max.): 2,000 rpm, table length: 4,000 mm, table width: 2,000 mm, CNC Bed-Type Milling Machine SACHMANN RAMBAUDI - MP-212 HS MACH-ID 9328 Make: SACHMANN RAMBAUDI Type: MP-212 HS Control: HeidenHain iTNC530 Year: 2007 KOSMO 3 indexing head Sk-50, 0,02 Degrees, 1195 Nm Spindle extention L = 600 mm with 2000 Rpm 3D Measuring probe MP60 ATC Chain 80 Positions Predpfx Ahex Nh H Do Uef Coolant system 1320 L with 4,8 Bar Rotary indexing table  2000 x 1600 x 15 ton V-Axis (in feed) 1500 mm Rotation 3 U/Min HeidenHein RON 700 encoder for Table rotation Ram size 500 x 500 with 56 kW Chip conveyor  X-Axis: 6000mm Y-Axis: 2000mm Z-Axis: 1400mm Table Length: 4000mm Table Width: 2000mm Table load: 25000 Power on spindle: 37kW Spindle speeds: 2000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Millinghead auto-index:2.5 x 2.5° Length: 15000mm Width: 8000mm Height: 6000mm Weight: 85000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2007, Mazak Variaxis 500-5Xi II Twin Pallet 5 Axis CNC Machining Centre. Serial No. 193582 (2007) with Mazatrol Matrix CNC Control (2024), Pallet Size Capacity 500mm Work Diameter, 405mm Work Height, 300kg Work Mass, 40 Spindle Taper, 12,000rpm Max Spindle Speed, 40 Tool ATC, FSE 1100 Litre Coolant System with Swarf Conveyor, Flow Rate 220 LPM Machine Weight 11500kgs, Manuals Prodpfx Ahex E T Npj Usf Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Prsdpfx Ahevr Eh Eo Usf Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, total height: 3,200 mm, total width: 3,600 mm, total length: 4,900 mm, overall weight: 3,300 kg, Accessories: tool changer for tools coolant system coolant & oil tank Pedsx Ni Hfopfx Ah Uorf hydr. Tool clamping for quick and easy tool change - horizontal / vertical sliding head for changing the active tool in the program during processing Spindle 40 SK RPMs 18-6300 rpm Volt 380 V Hertz 50 Hz

Condition: ready for operation (used), controller manufacturer: Heidenhain tnc 124, empty load weight: 6,000 kg, total length: 3,960 mm, total width: 2,450 mm, total height: 2,600 mm, Kiheung Point U3 X: 1200 - Y: 600 - Z: 550 mm CNC Longitudinal travel X-axe: 1200 mm Cross travel Y-axe: 600 mm Travel Z-axe: 550 mm Dimensions clamping space- table: 1700 x 470 mm Power on spindle: 7,5 kW Admission in millinghead (ISO): ISO 50 Max speedrange: 40 > 1620 rpm Prsdpex Impbefx Ah Usf

Condition: good (used), Year of construction: 1999, Used universal milling machine by Forthworth Model: U 500 SK 40 spindle taper Heidenhain 2-axis digital readout Huron swiveling head Prsdpfjx Ivn Tox Ah Ujf

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, Prsdpfx Aeu Rb Snoh Uof spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, swarf conveyor

Condition: used, Year of construction: 2018, Mori Seiki NTX2000/1500SZM Mill/Turn with F31iB5/Celos ERGOline Touch Control, Main Spindle Kitagawa 10”dia Chuck at 4000rpm, Sub-Spindle Kitagawa 8”dia Chuck at 5000rpm, 10 Station Turret, Milling Head Capto C6, 76 Position ATC, Hydrajet WP10-1000 High Pressure Coolant, Swarf Conveyor, Machine Weight 15,320kgs. S/No. NTX21180210 (2018) Please Note: We have been made aware of a Tailstock Ballscrew repair needed. Please find attached 2024 quotation on the website for supply and fitting and take this into consideration when bidding on this item. Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Prjdpfsx E Ugvex Ah Ujf

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Pedpowid Spsfx Ah Ujrf Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 426, empty load weight: 19,000 kg, total length: 6,120 mm, total width: 5,050 mm, total height: 3,700 mm, volledige CNC indexeerfreeskop (2x 2,5°) gereedschapswisselaar met 30 posities gekoelde deurspindel en 2 magneettafels : 1000 x 300 mm Longitudinal travel X-axe: 3600 mm Prodpfx Ahsxpkife Uof Cross travel Y-axe: 1000 mm Travel Z-axe: 1600 mm Dimensions clamping space- table: 4100 x 900 mm Power on spindle: 22/29 kW Admission in millinghead (ISO): BT 50 Max speedrange: 1 > 2250 rpm

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Pjdpfx Ahevz A Rio Uorf Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: used, Year of construction: 2020, Mori Seiki NTX2000/1500 2nd Gen Mill/Turn with Celos/F31iB5 Control, Max Swing of Workpiece 700mm, Max Swing over Cross-Slide 700mm, Max Distance Between Centres 1842mm, Max Turn Length 1538mm, Main Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Psdjx E Ubmspfx Ah Uorf Sub-Spindle Kitagawa 210mm dia Chuck at 5,000rpm, Milling Spindle Capto C6 at 12,000rpm, 76 Position ATC, 12 Station Turret, Hydrajet MS30-1000-70 Bar High Pressure Coolant, Machine Dimensions (LxWxH) 6205 x 2830 x 2750mm, Machine Weight 18,950kgs. S/No. NTX23200821 (2020) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Predpfoxv Svmex Ah Ujf 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: used, Year of construction: 2011, Mazak Quick Turn Smart 200M with Mazatrol Smart Control, 215mm 2 Jaw Chuck, 12 Station ATC, Live Tooling, Powered Tail Stock, Travel X = 225mm, Z = 605mm, Swarf Conveyor (2011) Podpfx Ajx E Tzreh Ujrf Location: This lot is located in Birmingham, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Prodpfx Ahjtmtkte Ujf Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, 1020mm max turning length, 5000rpm main spindle, Prsdow Npz Iopfx Ah Uof 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: excellent (used), Year of construction: 2015, Maximum cutting diameter 640mm, maximum cutting length 1100mm, bar capacity 80mm, B axis -120/+105 degrees, C axis 0.001 degrees, Spindle power 18.5Kw, spindle speed 3,500 rpm, milling power 15Kw, milling speed 12,000 rpm, sub spindle speed 3,500 rpm, Psdpfxett Nrts Ah Usrf 40 station ATC, Y axis travel -/+ 125mm, Fanuc 31i control, magazine barfeed, swarf conveyor, parts catcher.

Condition: good (used), Year of construction: 2015, Swing over bed 720mm, maximum machining diameter 420mm, maximum machining length 1274mm, bar capacity 77mm, Prodpfx Aovgz D Eeh Usf spindle speed 4,000rpm, milling speed 4,000rpm, 12 station turret, Mazatrol smart control, swarf conveyor, parts catcher, tool setter, and 3 jaw chuck, magazine barfeed unit.

Condition: good (used), Year of construction: 2011, Maximum cutting length 118mm (spindle 1), 125mm (spindle 2), Maximum cutting diameter 165mm, bar capacity 64mm, spindle speed 4,000 rpm, sub spindle speed 5,000rpm, milling speed 6,000rpm, C axis 0.001 degrees, spindle power 15/11Kw, 12 station upper & lower turrets, Y axis +/- 40mm. Fanuc control, swarf conveyor, barfeed unit. Prsdpfx Asu Hk Aush Uof

Condition: excellent (used), Year of construction: 2010, 412mm max. machining diameter, maximun turning length 753mm, 225 degree movement on B axis, 15HP spindle motor power, 6,000rpm spindle speed, 6,000 rpm sub spindle speed, Podpfx Ahjwxw A Ho Ujrf 52mm bar capacity, milling speed 12,000rpm C axis & Milling, 9 station lower turret. Swarf conveyor, tool setter, Coolant, Interlocked guards, Swivelling Universal Head., C Axis (0.001deg), Mazatrol Matrix control

Condition: excellent (used), Year of construction: 2017, Mazatrol Smooth G Control, Bar capacity 65mm, maximum machining diameter 344mm, 2 off 12 Station Turrets, 1325mm between spindles, C axis to both Spindles (0.0001 degree) Y Axis on both Turrets, Spindle Speed 5000rpm, Spindle Motors 22kW, Pjdpfstt Nwiex Ah Ujrf Milling 6000rpm on both Turrets, Swarf conveyor, Tool Setter, Hydrafeed Magazine Barfeed

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, Predpfoxqyg Nox Ah Uef 30kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, Prodpfx Aow I Tnioh Usf FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Prodpfx Aoxftqdjh Ujf Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,