Used Punching Rotor for sale (2,896)

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder - motorized ram adjustment - Table plate with ball rollers Tsdpjdzqddjfx Adlef - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Year of construction: 2024, condition: new, - debarker with 3/3 feed rollers - infeed and centering table - min log diameter 100 mm - max log diameter 600 mm Tedpfx Adofvbphjlof - min log length 2.000 mm - 30 m/min feed speed - 5 pcs. changeable carbide knives - 37 KW Main Motor - 9,2 KW Gearbox inffed and centering table - 5,5 + 7,5 KW Gearbox feed rollers - 9.000 Kg weight

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, table length: 2,000 mm, pressing force: 200 t, stroke adjustment: 30,150 mm, overall weight: 32,000 kg, DGUV certified until: 09/2026, year of last overhaul: 2023, Raster servo punching press. Mechanically overhauled in 2023 with new bearings on the eccentric shaft and backlash-free hand-scraped connection between ram and connecting rod. Desch Servox gearbox and Siemens torque motor inspected and overhauled. Three-piece massive tie rod cast construction of the machine components. Stroke adjustment 30 – 150 mm. Ram adjustment 100 mm. Electronic press force measuring system. Hydraulic overload protection system. Hydraulic table clamp. Hydraulic ram clamp. Guide rails. Raster precision roller feeder with hydraulically pressed rollers guarantees high response speed and accuracy. Immediately available. Tedpfx Aoxbf Nwjdljf

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 673517306, Used Durma RP9 Punch press. No photos as currently safely stored in workshop behind other equipment. Tsdpfx Adjw Uf Iujlsf Seen working in September 2024. Decommissioned by osupplier and moved to our unit. We have not been able to set it up as not enough room and planned moved fell through. Films of machine working availalbe on request and machine is available to view in decommissioned state.

Year of construction: 2020, condition: ready for operation (used), General Data Todjxqtfxopfx Adljf Measurements width 5710 mm Measurements depth 6370 mm Measurements height 2220 mm Machine weight 14000 kg Control Unit Brand BOSCH Model MTX Main Drive Number of axis 6 Turret Number of turrets 1 Tools Number of station 12 Media Oil tank 300 liters Additional Equipment Hydraulic Motor Power: 11 kW Axes Drive Type (C1 and C2): Direct drive Hydraulic Punching Force: 30 tons Portable CNC Control Panel Work Chute: Automatic system to take out cut parts Mobile Storage Box for Cut Parts Waste Box Light Barriers This 6-axis Baykal BPM-T 1525X30 was manufactured in 2020, featuring a robust 30-ton hydraulic punching force and a versatile tooling system with 20 stations and indexable tool holders. It supports a working range of 3000 × 1500 mm and rapid axis speeds (X: 100 m/min, Y: 80 m/min). Equipped with Bosch MTX CNC control and Lantek CAM software, it ensures precision and efficiency. If you are looking to get high-quality punching capabilities, consider the Baykal BPM-T 1525X30 machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2005, condition: excellent (used), pneumatic punching machine Tsdpsff Apwjfx Adlef

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Tsdpfx Adsv N Hrtslsf Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15514, This used wood brushing machine, RUSTIK MASTER 400, is designed for final surface finishing—fine sanding, structuring, smoothing, and other finishing operations. The specific surface treatment depends on the type of tool/brush used. The machine is suitable for small to medium-sized wooden workpieces, as well as wood-based composite materials and certain plastics. 1. Separate unit with 1 oscillating brush – 3 kW motor (used steel brush, excellent condition) 2. Separate unit with 1 oscillating brush – 3 kW motor (new TYNEX P80 brush) 3. Separate unit with 2 rotary brushes – 0.37 kW motor (used TYNEX brushes, excellent condition) The feed belt is heavily worn. A replacement feed belt can be ordered and replaced as needed. Surface treatment, structuring, and graining: These processes are used for finishing primarily solid wood workpieces. The aim is to create or highlight the natural wood structure. For this purpose, brushes of various hardnesses are available. The choice of tool depends on the process requirements and the desired final structure. The working part of the tools is made of synthetic or metallic fibers with various properties. If fitted with non-original brushes, the machine can also be used for other operations such as surface cleaning, polishing, fine finishing sanding, and more. Todpfsxhhxnox Adlsf Open design allowing brushing across a working width of up to 800 mm Continuously adjustable workpiece feed speed Independent adjustment of working unit height Manual height adjustment of working units + height indicator Precision linear guidance ensures maximum accuracy and structural rigidity Spring-loaded, adjustable infeed and outfeed pressure rollers on each head for optimum workpiece stability CE electrical and safety standards Manufactured in the EU Supplied with tools + option to purchase additional brushes: Steel, TYNEX P46, P80, and P120 Year of manufacture: 2015 Technical data: Working width: 400 mm Brush motors: 3 kW + 3 kW + 0.37 kW Feed motor: 0.55 kW Tool diameter / speed: 210 mm / 1,000 rpm Minimum workpiece length: 250 mm Maximum workpiece height: 300 mm Feed speed with frequency inverter: 4 – 12 m/min Dimensions: 2120 x 910 x H 1530 mm Total weight MASTER 400: 700 kg

Condition: good (used), functionality: fully functional, Passage width: max. 150 mm Passage height: max. 5.0 mm Other: Suitable for cutting stamping grids Actuation via the press ram, return stroke by springs Tsdpfxexg Rxuj Adlef

Condition: new, Year of construction: 2023, Sunrise punch-cutting machine IW-80SD IW-80SD Specifications tonnage 80ton punching capacity ᴓ 26x22mm/ᴓ 50x12mm discharge 510mm angle bar 150x150x12mm 90⁰ strip 460x15mm / 300x20mm Weight 2550 KG Tjdpfx Asvf I Rcodlsf Multiple models available from stock.

Condition: good (used), Die holder, notching tool, punching tool, punch, punching die, punching punch, -Punching tool punch die with stripper -Punching dimensions: 15 x 60 mm square -Dimensions: 170/145/H235 mm Tjdpfx Adec Nlyyelof -Weight: 14 kg

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Todpfx Adow Tri Nelef

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2022, operating hours: 60 h, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Tedpfxjxmfc Us Adlef Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: excellent (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 32250, Size 64 x 90 cm, for diecutting only, excellent condition Tsdpfjw Inz Dsx Adljf Machine no.: SBDS32250

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication Tedpfx Aoxg Rvajdljf • Slide guide with V-prisms • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Tedpfx Ajv Tp D Hodlef Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Year of construction: 2001, condition: used, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Tedpfxowirkge Adljf Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A used four-column automatic punching press MABU with MPC200 control in very good technical condition. Compressive force 30° before UT: 250kN Stroke rate, infinitely variable: 80-400 rpm Stroke adjustment: 7-62mm Tool holder: Diameter 40H7x90mm Clearance between the front/side uprights: 404/334mm Todpfx Adouh U Etolef Further tech. Data see pdf- document. Tech. Data and dimensions: Errors excepted.

Condition: used, Year of construction: 2000, pressure 130 t no. of strokes 50-250 Hub/min sheet width 250mm mm stroke 8-120 mm ram - range of adjustment 100 mm table surface area 1600x800 mm ram surface 1600x800 mm hole in the table 1100x250 mm table height 1000 mm 370 mm weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 3900x2500x3800 mm Todpoxh Sypefx Adlof

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Tjdjwcxccopfx Adlof Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Tjdpfov T Anlox Adlsf Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Year of construction: 2009, condition: ready for operation (used), Main Drive Punching force 1250 kN This KALTENBACH KPS 506 was manufactured in 2009. It's an automatic punching and shearing system for flat bars and angle profiles, featuring a 6-tool automatic changer with hole diameters ranging from Ø5–40 mm. It supports straight and mitre cutting with a working range of 50 × 5 mm to 500 × 25 mm. Includes NC-controlled automatic feeding and a finished part delivery unit. Contact us for more information about this machine. Application Types Tsdpfxjxuaw Ne Adlef Punching

Condition: used, IMV Punching Press Type: DM 125 Year of manufacture: 2016 Pressing force: 1,250 tons Stroke adjustment: 250 - 500 mm Ram adjustment: 300 mm Strokes per minute: 5-35 Installation height: 1,150 mm Tjdpfx Adoxnxlxsljf Table area: 4,500 x 1,800 mm Ram area: 4,500 x 2,000 mm

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Todpfxjw Trkaj Adlef Exact details can be found in the PDF.

Condition: good (used), We are offering several dies, punches, reducing sleeves, and a quick-release clamping set for Peddinghaus here. Exact details can be found in the PDF. Todpsw Trkgsfx Adlef