Used Rolling Mills for sale (16,163)

Condition: used, mileage: 212,263 km, power: 346 kW (470.43 HP), first registration: 10/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, Short cab, sun visor, rotating beacons, 33-ton chassis, air-suspended rear axles, multifunction steering wheel, storage box, automatic transmission, 50 mm towing hitch, reversing camera, navigation system, air conditioning, ZF intarder, 3.90 m wheelbase, differential locks, rear crane hydraulics, AP axles, heavy-duty cooler, 12,000 kg unladen weight without crane container... Hook loader Marrel AL20S53 with sliding hook, hydraulic locking front and rear, hydraulic underrun protection, CE2020. Hodpfx Absx Upknjvofd Crane container (internal: 4.70m x 2.48m x 0.80m), foldable aluminium drop sides, steel floor, quick change system, crane Fassi F185A.2.24 XE Dynamic, radio remote control with engine start/stop, rotatable hydraulic outriggers operated by remote, 5+6 control circuits with slewing servo, 4x hydraulics at 12.55m/1100kg, hardly used. Very good overall condition.

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Hsdpfx Abeyurx Tevsfd Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Hjdpfoxytmhox Abvefd Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: used, Year of construction: 2009, x-travel 1.800 mm y-travel 700 mm z-travel 700 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 25 / 35 kW max. Torque 130 / 87 Nm tool taper HSK A63 DIN 69893 swivellable B: +/- 100 ° table surface area 2.100 x 700 mm max. table load 1.500 kg number of T-slots 7 table diameter 750 mm max. table load 500 kg number of T-slots 7 rotatable C: 360 ° number of toolpositions 30 pos. tool taper HSK A63 DIN 69893 max. tool weight 6,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Hfodpfxjyhhtge Abvjd max. tool length 300 mm change-time chip to chip 7,6 sec rapid traverse ( X / Y / Z ) 40 m/min Accelaration 4 m/s² feed speeds max. 40.000 mm/min Feed force ( X / Y / Z ) 8 kN total power requirement 70 kVA weight of the machine ca. 13,0 t dimensions of the machine ca. 7,0 x 6,2 x 2,8 m 5-Axis CNC - Travel Column Milling Machine DECKEL MAHO - DMF 180 New Design - Swivel-Head (B-Axis) - integrated rotary-table - internal coolant system - Operating-Hours: Spindle-Runtime: ca. 10.000h

Condition: good (used), Year of construction: 1998, functionality: fully functional, Used milling machine Manufacturer: Macmom Model: M100NC Hjdpsx Ey R Tofx Abvsfd Year of manufacture: 1998

Condition: ready for operation (used), Year of construction: 2015, operating hours: 16,661 h, Control Unit Brand SIEMENS Model 840 D Main Drive Number of axis 5 This 5-axis DMG MORI Beta 800 TC was manufactured in 2015. It features a Siemens sl Operate 3G control, a counter spindle with a C axis, and dual chucks on both main and counter spindles. Equipped with a 48-tool HSK 63A chain magazine and a coolant system capable of 8/20 bar, it's ideal for complex turn-mill operations. Consider the opportunity to buy this DMG MORI Beta 800 TC turn-mill centre. Contact us for more information about this machine. Application Types Hsdpfox H U Ezex Abvjfd Turning

Condition: new, Year of construction: 2025, actuation type: hydraulic, number of rollers: 4, roller (top) diameter: 180 mm, side roll diameter: 150 mm, roller diameter: 180 mm, roller length: 1,570 mm, working width: 1,570 mm, sheet thickness steel (max.): 9 mm, input voltage: 400 V, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, – Capacity 2070 × 9 mm (minimum diameter 900 mm) 2070 × 7 mm (minimum diameter 270 mm) Bending capacity 2070 × 7 mm (minimum diameter 900 mm) Bending capacity 2070 × 5 mm (minimum diameter 270 mm) Hfjdpfx Abex Hq Dyeved – 4 rolls – Hydraulic operation – Hardened rolls – Top roll diameter: 180 mm – Bottom roll diameter: 180 mm – Side roll diameter: 150 mm – Digital display for left roll movement – Digital display for central lower roll movement – Digital display for right roll movement – Top roll hydraulically swing-out – Steel construction made of ST-52 – Hydraulic drop-end system for easy positioning of the rolls – Hydraulic lifting and lowering system for center and side rolls – Hydraulic balancing system – Overload protection – Documentation – 400V

Condition: used, total length: 4,500 mm, total width: 900 mm, total height: 1,650 mm, Empty weight: 3.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 8419012 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.7 - Max. sheet thickness [mm]: 3 - Max. working width [mm]: 3040 - Top roll diameter [mm]: 150 - Bottom roll diameter [mm]: 150 - Transport dimensions: 4500mm x 900mm x 1650mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hedpfx Abeyn Abfevjfd Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2016, total length: 4,400 mm, total width: 1,450 mm, total height: 1,300 mm, Empty weight: 5.200 kg Price: On request - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 210384 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 7.5 - Max. sheet thickness [mm]: 6 - Max. prebending thickness [mm]: 4 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 210 - Bottom roll diameter [mm]: 210 - Options: Cone rolling, Digital readout - Transport dimensions: 4400mm x 1450mm x 1300mm (l x w x h) Hfsdpfx Abeyn Aanovod - Transport weight [kg]: 5200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, x-travel 1.100 mm y-travel 600 mm z-travel 560 mm Control Heidenhain iTNC 530 spindle tunring speed 12.000 U/min tool taper SK 40 number of tool places 40 Pos. weight of the machine ca. 7,4 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - 4th axis preparation - Internal coolant supply Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Hodsytybyspfx Abvsfd Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.000 mm surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° NC swivel head +/-90 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Hodpfx Aoxx A Ncobvofd Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: like new (used), functionality: fully functional, control type: manual, actuation type: hydraulic, roller (bottom) diameter: 255 mm, roller (top) diameter: 255 mm, roller diameter: 255 mm, roller length: 2,500 mm, sheet thickness (max.): 17 mm, power: 5.5 kW (7.48 HP), input voltage: 380 V, Dear Sir, We can offer you a ROUNDO (Sweden) electro-hydraulic plate roller Model: PS-255 Prebending capacity: 2500 x 8 mm Bending capacity (diameter 3 x top roll dia.): 2500 x 14 mm Bending capacity (diameter 5 x top roll dia.): 2500 x 15 mm Bending capacity (diameter 3–5 meter): 2500 x 17 mm Machine no.: 976504 Delivered: 04-1997 Dimensions: 4 x 1.18 x 1.4 m Net/Gross weight: 6200 / 6800 kg Diameter of all rolls: Ø 255 mm Motor power: 5.5 kW Hydraulic machine 3 driven rolls Including: Push button control Digital readout (DRO) Dutch manual Price of the ROUNDO hydraulic plate roller, model PS-255: on request by e-mail This offer remains valid as long as the machine is unsold. The machine has original paint and has seen very little use. Offer is valid subject to prior sale. You can find other machines on our website. We are happy to provide additional information or answer any questions. If you would like to inspect the machines, please schedule an appointment, as we are frequently visiting customers. Delivery terms: Delivery time: from stock Hodpfx Abeyt Hqnovjfd Delivery: ex works Baarle-Nassau Payment: prior to collection Prices are net, excluding VAT. Machinehandel De Leeuw BV is one of the few companies in Europe specialising in stocking and selling mainly used Kardex Remstar automatic lift and rotary storage systems. We have been assembling and/or dismantling these systems safely with VCA-certified technicians for over 33 years. Best regards, Antoine de Leeuw Machinehandel De Leeuw BV Oordeelsestraat 7-B 5111 PA Baarle-Nassau The Netherlands

Condition: good (used), Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows Hfjdpfxeb A Rg Se Abvod -EXACTLY -Take: Ø 50 mm -1x pallet tool -different sizes -Weight including pallet: 346 kg

Condition: ready for operation (used), Percussion Mill SBM Austria Brand: SBM Austria Type: RHSM 13/13/4 Hfedpfxov U Hl Rj Abvsd Feed Opening : 1250 x 1100 mm Driving: 160 kW e-motor.

Condition: used, Year of construction: 1997, Year: 1997 Hjdpfx Abswtd Dyjvofd Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar LOVO Light Coolant

Condition: refurbished (used), Table Size: 1635mm x 460 mm X Long Axis: 1300 mm Y Cross Axis: 700 mm Z Vertical Axis: 500mm Spindle Taper: 40 ISO Spindle Speeds: 30-2066rpm Feed Range: 1.6 to 820mm/min Rapid Feed Rates X/Y/Z: 2800mm/min Max. distance between milling head and table 649 mm Machine Weight 3200 kg Machine Dimensions L x 2361mm D x 2500mm H x 1648mm Main Motor 8.7 kW Machine Light Universal Head Coolant Condition: Fully Refurbished (reground, hand scraped and re-aligned) Hfjdpfx Abewh N Uyjved New Screws & Nuts on X, Y and Z

Condition: excellent (used), Year of construction: 2011, New 2011 Axis X 785 mm Axis Y 470 mm Axis Z 530 mm CNC PROTOTRAK PMX Table length 900 mm Table width 500 mm Max. part weight 460 kg Number of tool pockets 16 Spindle taper BT40 Max. spindle speed 8000 rpm Spindle motor power 11 kW ----- Hfjdjtt Ivbspfx Abvjd Length x width x height 2870.0 × 2246.0 × 2743.0 Weight 3410 kg

Condition: new, Drilling and Milling Machine OPTIMUM OPTImill MB 4 - Exhibition Machine - This offer is for an equipment package. The following items and options are already included in the price: - Drilling and milling machine OPTImill MB 4 Optimum - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM Hjdpou R Tftsfx Abvjfd - Precision machine vice FMS 100 Optimum - new exhibition machine -

Year of construction: 2010, condition: used, functionality: fully functional, Elumatec SBZ 130 CNC-controlled milling machine, 7,000 mm version 8 clamps Tool changer with 8 positions on the milling head Hfjdpfx Abeyr Rubjvsd

Condition: new, Year of construction: 2026, 560 mm 320 mm 400 mm 950x450 mm Hfsdpeyrtyasfx Abvod 1050x320 mm 25-3600 U/min SK 40

Condition: used, Year of construction: 2005, Lot consists of: (1) 4-Axis HMC Hjdpfx Asym Tdzobvjfd Technical Details: X/Y/Z 630 mm, spindle 15,000 rpm / HSK-63-A, A-axis swiveling table, CNC SIEMENS SINUMERIK 840 D.

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm Hfjdpfx Ajyrn A Nsbvod y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm Hsdpeyrnzfjfx Abvofd y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: used, Year of construction: 2000, max swing 700 mm, X/Y 255/520 mm, 12-position upper tool turret and 8-position lower tool turret with driven tools, measuring head, tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15 t Hfsdpfoym Sx Dsx Abvjd

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm Hfjdpfxjyrnwme Abvsd z-travel 290 mm table surface area 600 x 210 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 830 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: * 3-axis positioning control with active digital display Heidenhain TNC 123 - Manual mode: Manual operation and positioning with manual input - Automatic mode: Single-block programme run, programme storage * Fixed angle table * Movable vertical milling head, swivel range +/- 90 degr., quill stroke 60 mm * Coolant equipment * Central lubrication * Tailstock with counter bearing * Manual