Used Rotary Label Press for sale (30,237)

Condition: good (used), Year of construction: 1980, table load: 12,500 kg, table width: 1,800 mm, total length: 2,000 mm, Table Length:2000mm Table Width:1800mm Table load: 12.500 Iaedpfx Adex S Iw Iedsl Length: 3500mm Width: 2000mm Height: 1200mm Weight: 0kg Union rotary table

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: Iaodpfx Aox A U Ncjddjl The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, Year of construction: 2003, pressure . t throat . mm stroke . mm total power requirement . kW weight of the machine ca. 4 t Iodjw Syfcjpfx Addjal

Condition: new, The AHK M 1230 NC is a highly efficient press brake from KNUTH, designed specifically for sheet metal processing within the press brakes category. This machine offers a modern, cost-effective NC alternative to traditional CNC press brakes, making it ideal for operators accustomed to manual programming. Featuring a high-precision, stress-relieved steel frame and hydraulic cylinders, the AHK M 1230 NC excels in handling complex bending sequences effortlessly. Enhanced safety features, including light curtains and a CE-compliant design, ensure operator protection while maintaining productivity. The NC control system, complete with a user-friendly touchscreen, allows for easy input of bending sequences, accommodating up to 500 programmable data sets. You can confidently handle a variety of materials and shapes thanks to Promecam tool mounts and an adjustable back gauge with motorized X and R axes. With features designed for ease of use and reliability, now is the perfect time to request a quote for the AHK M 1230 NC press brake, ensuring your workshop benefits from superior capabilities in sheet metal processing. Iedeqc S Naepfx Addsal

Condition: used, Year of construction: 2012, Rotary UPS System – 800 kVA – Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: Iajdpfx Adswuyzwodel ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: good (used), Year of construction: 2000, operating hours: 28,155 h, functionality: fully functional, Bale Press Paal Konti 200 D, year of manufacture 2000, optional with matching conveyor belt Paal KEM-1400 Technical Specifications: Manufacturer: Paal Model: Paal Konti 200 D Year of manufacture: 2000 Operating hours: 28,155 Pressing force: 60 t Drive power: 45 kW Total connected load: 60 kW Feed opening: 1020 x 1400 mm Bale dimensions: 750 x 1100 mm, variable length Tying: 4-fold automatic Throughput capacity at: 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight: 450 to 650 kg Transport dimensions: approx. 10,123 x 2,152 x 2,720 mm (LxWxH) Machine weight: approx. 15,000 kg Materials: Paper, cardboard, film The press is in good condition and has been inspected and tested. A video is available on our website or YouTube channel. Full documentation available. Iedpfxex Tflfo Addoal Please note: All technical data are based on information from the manufacturer. We assume no liability for the information provided or for any possible errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by appointment. Sale is ex works, against advance payment, without warranty or guarantee.

Condition: excellent (used), Year of construction: 1965, table load: 60,000 kg, table width: 3,250 mm, total width: 3,250 mm, Indexing dividing setting: 1e stage full rotation setting 5 Gr 2e stage full rotation (fine) 30 " Turning rotation setting: 1e stage 1 - 48 Rpm 2e stage 0,27 - 11 Rpm   V-Axis movement setting: 1e stage 10 mm 2e stage (fine) 0,02 mm Scraped guide way 1 size: 300 x 85 mm  Scraped guide way 2 size: 225 x 85 mm Scraped guideway 3 size: 250 x 85 mm Table Ø: 3250mm Table load: 60 T Movement V-axis: 1800mm Rotation B-Axis: 360000° Rotation speed B-Axis:48Omw/min. Movement speed V-axis:1600mm/min. Length: 6900mm Width: 3500mm Height: 1400mm Weight: 25000kg Iaedpfxsx S Ihaj Addol

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Iajdevtpq Hspfx Addjl Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos and our function video. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: used, Year of construction: 1960, pressure 1000 t stroke 600 mm weight of the machine ca. 4 t Isdpfew Syd Esx Addoal

Condition: used, Year of construction: 1984, total length: 3,500 mm, total width: 1,400 mm, total height: 2,500 mm, Weight: 6.800 kg - Year: 1984 - Documentation available: No - CE certificate present: No - Serial number: 12552 - Drive system: Teach-in - Control system brand: Delem - Control system type: DA-22 - Power [kW]: 5.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 80 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Crowning system: None - Punch holder: Standard - Tool holder type: European-style Iodpjx R S Nrefx Addjal - Tools included: Yes - Options: Digital readout - Motor power: 5.5kW - Transport dimensions: 3500mm x 1400mm x 2500mm (l x w x h) - Transport weight [kg]: 6800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Iedpfx Adeyaackedsal Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: good (used), Year of construction: 1978, Make: HAULICK ROOS Type: RVD 40 Iedjx S H Iljpfx Addoal Year: 1978 Levelling straightner RASTER 12 180/19.150-1 New 1986 incl. Decoiler  incl. Feeder  Capacity Kg: 40000 Table Length:590mm Table Width: 500mm Hole in table:100mm Ram size: 590 x 380mm Stroke: 8 - 50mm Strokes: 30 - 300Min.

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Iajdpfx Adoxpxhvjdel Condition: The press is in very good condition and ready for immediate operation, see the function video for more information. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1999, stroke 1000 mm diameter of piston 70 mm Iajdow Sydfjpfx Addsl

Condition: used, Year of construction: 2009, total length: 5,500 mm, total width: 2,300 mm, total height: 2,900 mm, Weight: 18.700 kg Price: On request - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 83261 - Drive system: CNC - Press force [ton]: 250 - Max. working width [mm]: 4300 - Column gap [mm]: 3800 - Backgauge depth [mm]: 1000 - Options: Finger safety guard - Transport dimensions: 5500mm x 2300mm x 2900mm (l x w x h) - Transport weight [kg]: 18700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Iaedpfx Aexrl Hdoddjl

Condition: excellent (used), Year of construction: 2006, Dimensin: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm Iodpfx Adoyaab Hedjal The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: excellent (used), Year of construction: 1995, Decoiler Max. width 350 mm Clamping area coil internal 470 - 530 mm Coil diameter 1500 mm Work load 2000 Kg Straigtner Width 350 mm Roll diameter 30 mm Number off rolls 9 units In feed rolls 2 units In feed roll diameter 90 mm Working speed 40 M/Min Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Iaodpex Sx Spsfx Addel Length:3200mm Width:1500mm Height:2200mm Weight:3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1990, total length: 1,860 mm, total width: 940 mm, total height: 1,410 mm, Weight: 1.200 kg Press brake + sheet metal shear Combintation-Machine Isdpfxjxx Smdo Addeal - Year: 1990 - Documentation available: No - CE certificate present: No - Drive system: Conventional - Power [kW]: 3.0 - Press force [ton]: 34 - Max. working width [mm]: 1300 - Column gap [mm]: 1450 - Throat depth [mm]: 100 - Backgauge depth [mm]: 600 - Tools included: Yes - Transport dimensions: 1860mm x 940mm x 1410mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Iajdsyaabyjpfx Addel Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Year of construction: 2024, condition: excellent (used), Segment radius top tooling for 1000 and 2000 Ton machine Full sets segmented on 835 mm and 10 sections to make 8000 mm Iedpfx Adjx Sxukjdsal Radius 30 / Radius 31 / Radius 32 / Radius 33 / Radius 35 Radius 36 / Radius 39 / Radius 40 / Radius 41 / Radius 42 Radius 43 / Radius 45 / Radius 47 / Radius 48 / Radius 50 Radius 51 /  Radius 53 / Radius 55 / Radius 57 / Radius 58 Radius 60 / Radius 62 /  Radius 70 / Radius 71 / Radius 73 / Radius 75 / Radius 80 Length:12000mm Width:2000mm Height:1000mm Weight:15000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, total length: 3,000 mm, total width: 600 mm, total height: 2,130 mm, Weight: 2.500 kg Iajdpfx Asxr Dnmeddsl - Documentation available: No - CE certificate present: No - Serial number: 2439 - Drive system: Conventional - Press force [ton]: 83 - Max. working width [mm]: 2500 - Column gap [mm]: 2700 - Transport dimensions: 3000mm x 600mm x 2130mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm Iajdpoyaaa Aofx Addsl max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: excellent (used), Year of construction: 2024, Minimum width 65 mm Maximium width 185 mm Load is 200 Metric Ton / Meter Operation angle from 60 - 180 Gr Die length 1000 mm and 500 mm sections Minimale Breite: 65 mm Maximale Breite: 185 mm Belastung: 200 metrische Tonnen / Meter Arbeitswinkel: 60°–180° Matrizenlänge: 1000 mm und 500 mm Segmente Länge: 1200 mm Breite: 1200 mm Isdpfx Adsx Sw Susdjal Höhe: 800 mm Gewicht: 1500 kg Length:1200mm Width:1200mm Height:800mm Weight:1500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Table Width 3500 mm Table load Iodsmb Urdspfx Addjal 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Width 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Hydraulic press TCS - 150T MACH-ID 8821 Manufacturer: TCS Type: 150T Control system: Siemens SIMATIC OP7 Year of manufacture: 1999 Table load sliding table 20000 Kg Table load upper table 9000 kg Table out feed stroke 2100 mm Column diamater 180 mm Closing force 1500 Kn Opening force 700 Kn Laser safe CE Safety Power 15 kW Specifications Ijdpfxoulwzme Addoal Metric US Standard Distance between uprights 2000 mm Installation height 2000 mm Table length 1500 x 2000 mm ram stroke 1800 mm Starting speed 50 mm/min. Working speed 8 mm/min. Return speed 50 mm/min. Table rotation 0 - 270 rpm Table rotation 0 - 180 ° Dimensions (estimation) length 4800 mm width 5600 mm height 5200 mm Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.