Used Rotation Gear for sale (14,161)

Condition: used, Year of construction: 2026, load capacity: 8,000 kg, lifting height: 51,000 mm, total length: 11,520 mm, Rotating forklift Magni RTH 8.51 Drive Diesel Hedpfx Alsy Tb Hfjbsnr Year built 2026 Lifting height (mm) 51,000 Lifting weight (kg) 8,000

Condition: good (used), Geared motor, electric motor, three-phase motor, electric geared motor -Manufacturer gearbox Bonfiglioli type: MVF49/F -Manufacturer Engine Fimet Type: MOF71A4 -Speed: 197 rpm -Power: 0.37 kW -Design: B5 angle Hsdpfx Asci Dk Ujlbenr -Shaft diameter: Ø 18 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 400/198/H200 mm -Weight: 16.3 kg

Condition: used, Year of construction: 1963, total height: 1,850 mm, total width: 800 mm, total length: 3,900 mm, Empty weight: 3.000 kg Price: On request Stroke: 1500mm Capacity: 10t - Year: 1963 - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 7.5 Hedpoy Auy Refx Albsnr - Transport dimensions: 3900mm x 800mm x 1850mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Chiaravalli, worm gear motor -Speed: 54 rpm -Transmission: Type CBFV040 i 25 Hnjdpox Rw H Njfx Albjr -Engine: Type CHT 63C4 B14 0.22 kW -Protection class: IP 55 -Hollow shaft: Ø 18 x 78 mm -Quantity: 1x geared motor available -Price: per piece -Dimensions: 315/118/H155 mm -Weight: 7 kg/pc.

Year of construction: 2006, condition: used, Rotation cutter Built in 2006 Hnedpfx Alsc Ihqiebor

Condition: excellent (used), max. wheel diameter 300 / 400 mm gear width 76 mm max. module 6 min. module 0,5 Hnjdpfxozq Hmcs Albor Control BWO CNC 921 adjustment of stroke position 94 mm/Hub stroke 82 mm no. of strokes 75 - 1000 Hub/min number of teeth 5 - 200 taper of shaper cutter SK 45 table diameter 400 mm total power requirement 50 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 5,0 x 3,8 x 3,4 m Machine in top condition.

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Hodpfx Alorr Ammsbjnr Nominal torque 63940 Nm Maximum torque 70330 Nm 8 MW test bench for gears, closed loop

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 4,950 kg, lifting height: 25,900 mm, fuel type: diesel, mast type: telescopic, construction height: 3,070 mm, empty load weight: 16,600 kg, total length: 7,150 mm, drive type: Diesel, construction width: 2,430 mm, Rotating telehandler Mast type: Telescopic Hjdpfxjzuhlhj Albonr Technical condition: New Front tyre size: 18-22.5 Michelin Rear tyre size: 18-22.5 Michelin Battery voltage: 12V Battery capacity: 160Ah

Condition: excellent (used), functionality: fully functional, Reishauer NRK change gears Original change gear set with substructure, including 50 ground change gears in the original wooden box. Hnsdoza Dk Sepfx Alber 26 loose change gears, including 2 with Z=63, 2 with Z=64, and 1 with Z=72 (original). All gears with ground teeth. The following accessories are also available: 2 adjustable steady rests 66189-2 + 66189-3 / setting blocks (one incomplete) 9 new grinding wheel flanges Various new and unused grinding wheels Balancing mandrel Thread rolling device Roll grinding device Various cams/cam profiles Grinding device, manufacturer Landert Motoren Various oil nozzles Unused strip curtain/splash guard All technical specifications are subject to printing errors and omissions. Sale exclusively within EU countries.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 1,215 h, load capacity: 5,000 kg, lifting height: 20,600 mm, fuel type: diesel, mast type: telescopic, construction height: 3,050 mm, power: 110 kW (149.56 HP), fork length: 1,200 mm, empty load weight: 17,930 kg, total length: 6,780 mm, drive type: Diesel, construction width: 2,425 mm, Rotating telescopic handler Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Hodpozn A Siofx Albjnr Speed class: 30 Condition: Ready for use and fully functional Technical condition: very good Front tire type: Air Front tire condition: 80 - 100% Rear tire type: Air Rear tire condition: 80 - 100% Description: The MRT 2150 Privilege Plus is an all-terrain, rotating telescopic handler that is ideally suited for applications in the construction and industrial sectors. This machine is a great asset for your transport tasks. It combines the functions of a telescopic handler, crane, and work platform, effectively integrating three machines into one. Its 360° rotation allows for the performance of various tasks without the need to reposition the machine. The five-sided cross-section of the boom ensures very high precision in its operation. At the same time, this maintains the lateral stiffness of the boom, regardless of its wear condition. This means added safety for you and your teams. You will soon find that you cannot do without this powerful, precise, and versatile tool. 3rd valve, Full set includes: Winch 3 tons - Mega basket - Bucket - Load hook 5 tons - Forks 1200, Radio remote control - Tow hitch for passenger car trailers - 4 plates to increase the contact area in the transport bracket on the back of the machine.

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Hodpezhpkxofx Albenr Year built 2026 Lifting height (mm) 29,900 Lifting weight (kg) 6,000

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 21,800 mm, fork length: 1,200 mm, total length: 8,210 mm, - Max. Tragkraft 6000 kg - Max.Hubhöhe 21.80 m - Maximale seitliche Reichweite 18.20 m Hnsdpjzq Humofx Albjr - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Gewicht 18000 kg - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift/2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: new, Gear Units / Gearboxes / Transmissions, Hodpfx Ajggfhnelbonr Large stock of used and unused gear unit and reducers from manufacturers like Flender, Siemens, Hansen, KSB, WGW, TGW and SALA Different ratio's, sizes, with / without backstop. Please contact us to find a suitable gearbox.

Condition: as good as new (ex-display), 3 Pcs. “UNUSED – SEW R147 DVE280S4” for Sale Also many other Geared Motors on stock. Manufacturer: SEW Eurodrive Type: R147 DVE280S4 Power: 75 kW Hnedpfx Aleglvvuobsr Voltage: 230 / 400 V Amperage: 240 / 137 A Hertz: 50 Hz Ratio: 8,26 : 1 RPM in/out: 1.480 / 179 Shaft ø out: 110 mm Weight: 887 / 952 kg

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Hedpfx Alsg Stz Ajbonr Shaft ø in: 65 mm Shaft ø out: 140 mm

Condition: good (used), Year of construction: 1964, Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, Container rotating device, Welding rotating device type H 02.5 Hnodpfszkqt Hsx Albjr -Load capacity: kg -Roller spacing: 600 - 1670 mm -Rollers: Ø 320 x 950 mm -Rolling speed: 0.15 to 1.35 m/min Right/Left rotation -Control unit: with manual control -Individual components: see photos -Transport dimensions: 1150/1105/H550 mm / 1100/600/H550 mm -Weight: 607 kg / 365 kg

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 697 h, load capacity: 6,000 kg, lifting height: 29,900 mm, fuel type: diesel, construction height: 3,100 mm, empty load weight: 21,800 kg, drive type: Diesel, construction width: 2,500 mm, Rotating telescopic handler Technical condition: New Front tire condition: 80 - 100% Rear tire condition: 80 - 100% Battery voltage: 12V Hsdpfx Aozb R Uyjlbenr Rear work lights, front work lights, full cab, CE certificate, Image is for illustrative purposes only. Wheel chocks, TÜV preparation, 40 km/h, LED work lights on the telescopic arm, fixed part on the right side, car radio with USB and Bluetooth, external microphone, 100W LED spotlights around the machine, 5x vibration dampers for the telescopic boom, Active CRC.

Condition: good (used), Fork carriage, rotator for wheel loaders, forklifts, telescopic handlers, forklifts, rotator, forklift rotator -Manufacturer: Stabau, forklift rotator 360° continuous rotation -Type: unfortunately without a type designation -Load capacity: approx. 2,500 kg -Mounting dimensions: see photos Hedpfozkg U Hex Albjnr -Dimensions: 1050/205/H755 mm -Weight: 353 kg

Condition: new, Year of construction: 2024, functionality: fully functional, Ideal for separating ferrous impurities from granulates such as plastics and dry, free-flowing powders such as flour and sugar in free-fall conveying systems. Hedpfx Asuc S Ihelbjnr We would be happy to carry out a test with your material to ensure that our product optimally meets your requirements. If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Different MAAG Melt Pumps available - For example Extrex 110 , 90 , 70 , 56 , 36 Hnodsdq Ak Uspfx Albjr - Possible to order complete on a frame with , motor , gear , cardan and a controll cabinett.

Condition: used, Year of construction: 1998, max. wheel diameter 1000 mm gear width 152 mm max. module 17 max. wheel diameter 1000 mm control Fanuc Serie 150 M total power requirement 75 kW weight of the machine ca. 29,5 t Max. diameter. Gear: 1,000 mm Dimensions: 5.5 x 5.3 x 3.2 m Weight: 29.5 tons Control: CNC (FANUC Series 150M) Max. wheel diameter 1,000 mm Max. day with single timing 1,000 mm Hnjdpfx Aleyan N Esbjr Face milling Max. module 17 Control FANUC Series 150 M Number of teeth 5 - 300 FACE WIDTH 152 mm X-axis -305 Y-axis -305 / +305 mm Z-axis -25 / +711 mm B-axis -5 / 90 degrees

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm gear width 58 mm max. module 10 min. module 0,5 Control Siemens Sinumerik 840D weight of the machine ca. 9,5 t dimensions of the machine ca. 3800x2600x2550 mm Maximum wheel diameter: 275 mm Module +: 10Module -: 0.5 CNC control Max. spindle speeds: 1200 rpm Max. wheel width: 58 mm Hodpfsyan Nfex Albonr

Condition: good (used), Gearboxes, spur gears, bevel gears, worm gears, crane gearboxes -Gearbox: Worm gearbox Crane gearbox -Type: unfortunately without a type designation -Translation: i = 7 : 1 Hjdpfxeziyh Re Albsnr -Hollow shaft: Ø 30 x 120 mm / Ø 19 x 43 mm -Dimensions: 210/200/H220 mm -Weight: 13.9 kg

Condition: excellent (used), max. wheel diameter 175 mm gear width 350 mm Hnodpfx Asznnitjlbsr max. module 3 min. module 0,5 weight of the machine ca. 0,9 t dimensions of the machine ca. 1,2 x 0,8 x 1,4 m

Year of construction: 1995, condition: ready for operation (used), A Höfler gear grinding machine is offered. Module range: 2-25, max. gear diameter: 1500mm, max. gear width: 720mm, min./max. generating grinding stroke: 60mm/750mm, ram stroke rate: 20-200double strokes/min, number of teeth: freely selectable, max. generating speed: 900mm/min, table diameter: 1000mm, distance between centers: 1250mm, min./max. grinding wheel diameter: 300mm/400mm, grinding wheel bore: 127mm, grinding wheel width: 45mm, weight: approx. 34t. Including paper band filter, counter support with steady rest and balancing unit. Documentation available. Inspection possible by prior arrangement. Hsdpfxjzrn Nns Albsnr