Used Salt Spray Chamber for sale (4,584)

Condition: good (used), Type: VCS 7034-5 Climatic Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 litres Performance for temperature testing: Chsdpfsxgd Rdsx Aaced Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Change rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance for climate testing: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50 % RH and +95°C / 50 % RH Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerants: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, Year of construction: 2006, Documented equipment / components: Year Equipment / Component 2006 Bead Apex machine with flipper – AFC1 2006 Bead Apex machine with flipper – AFC2 2011 Bead Apex flipper machine – AFC3 2012 Installation / commissioning AFC3 Codpoxb Ukkefx Aacjhd Line setup: • AFC (Automatic Feeding & Control) • Conveyor line • Drum applier • Loop conveyor • Extruder Control system: Operator panels with visualization units

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: Typ VAP ND, Steaming chamber external dimensions (WxDxH): 7100x2200x4250 mm. The steaming chamber has been dismantled. Cjdpfxsxrlvxj Aacehd

Condition: new, Year of construction: 2023, Graco Merkur spray pump 30:1, 36:1, 20:1, 24:1, 48:1 and more sizes, both for wall and on trolley. Now on stock at very strong promotional prices right now! The price is for Graco 30:1 airless for wall. Call for offers on other models. Chjdpfxjq Aubbe Aacod Prior sale reserved.

Condition: good (used), BALZERS LTE 020 – Thermally Controlled Sample Preparation Station ✔ Use in: Coating technology, semiconductor processing, surface analysis, electron microscopy • Digital display unit with 4 channels (B1–B4) Chodpfxoxl A Eds Aaced • Temperature display in °C • Adjustable via SET / UP / DOWN • Separate controls for mains and lamp • Power supply: 220V Note: For detailed technical specifications and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs upon request!

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Chedpsxp Rbhofx Aacod

Condition: excellent (used), Type: VC³ 7034 Heraeus Vötsch Climate Test Chamber with Humidity Control (Air-Cooled) Test Chamber Dimensions: Width 580 mm x Depth 765 mm x Height 750 mm External Dimensions: Width 780 mm x Depth 1,758 mm x Height 1,800 mm Specifications for Temperature Testing: Temperature range: -70°C to +180°C Temporal deviation: ± 0.1 to ± 0.5 K Spatial deviation: ± 0.5 to ± 1.5 K Temperature change rate according to IEC 60068-3-5 Heating: 3.0 K/min Cooling: 3.0 K/min Specifications for Climate Testing: Temperature range: -70°C to +180°C Temperature deviation in steady-state condition, according to IEC 60068-3-5 (depending on chamber temperature) Temporal deviation: ± 0.1 to ± 0.3 K Spatial deviation: ± 0.5 to ± 1 K Humidity range: 10% to 98% RH Chodpfx Aexfh Speaced Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 4.9 kW Rated current: 16 A Protection: 16 A slow-blow fuse, provided by customer Refrigerant: R-404A/R23 Test chamber volume: approx. 335 liters Net weight: approx. 515 kg For your safety as a buyer, please note the following information: The following actions are performed on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, chambers undergo a documented test run. Condition: Used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further inquiries, please feel free to contact us by phone.

Condition: used, El. heated chamber oven Nabertherm Codpfx Aasxmhhaecshd Type: N 500 / 45 HA Air flow: horizontal Temperature: max. 450°C Connected load: 28 kW Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm

Year of construction: 2023, condition: as good as new (ex-display), New machine warranty, stock item, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading trolleys available in stock (see picture). Please contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm Cedpfxexp Rpfe Aacohd - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 freely programmable programs, each with 40 segments - NtLog for controller: Data recording via USB stick - Air circulation: 3600 m³/h - Exhaust volume: min. 390 m³/h - Additional equipment: Loading rails - Connected load: 39 kW - Net weight: 1150 kg - incl. documentation, CE declaration We are pleased to offer installation and commissioning services. Inspection by appointment in our warehouse. We offer new and used industrial ovens. Contact us! Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, preheating oven, tempering oven, drying cabinet, chamber oven, curing oven, recirculating drying cabinet, recirculating air oven, solvent oven, chamber dryer

Condition: used, Supply air unit type 3072 A 7300/3650 m³/h, max. heating capacity 83 kW, hot water 90/70 °C. Exhaust air unit type 72 7000/3500 m³/h. Storage location: Nattheim. Csdpfsw I A N Aox Aacehd

Condition: good (used), Heraeus K 750/1 Tempering Furnace / Laboratory Furnace / Chamber Furnace For sale is a used K 750/1 tempering furnace from Heraeus. Technical Details: Manufacturer: Heraeus Model: K 750/1 Design: Tempering Furnace / Laboratory Furnace / Chamber Furnace Max. Temperature: 750 °C Heating Output: 3.6 kW Voltage: 400 V (three-phase) Chsdsxly A Hspfx Aacod Areas of Application: Laboratory, Industry, Workshop, Heat Treatment, Metalworking Condition: Used, Working Buy Heraeus K750/1 tempering furnaces and other items at affordable prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Condition: new, Year of construction: 2020, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm lock stroke 230 mm ejector stroke 70 mm capacity of ejector 40 kN height of form 120-350 mm Column diameter 56 mm casting capacity 54 kN Injection stroke 130 mm injection piston diameter 45, 50, 55 mm Casting volum 109. 150, 194 cm³ volume cast pressure 339. 274, 226 daN/cm² Casting area 176, 218, 264 cm² weight of the machine ca. 3,5 t Equipment of the machine 1.0.1 Cover for drop through area at the subframe 1.0.2 Cover for drop through area at the subframe with scale/chute 1.1.0 Motorized guard in casting direction left 1.4.0 Machine positioning mounting pads 1.5.4 Machine interior illumination 1.11.0 Convenience package energy efficiency 2.0.1 Ejector assistance packages 2.4.2 Securing of ejector platen 2.6.4 Machine assistance system SensiLock 2.8.0 Hydraulic adjustment of locking unit for shot positioning 3.1.1 Nitrogen pressure control for piston accumulator 3.2.4 Multi-Chamber furnace with pump 3.2.5 Isolated Cover for Crucible Multi-chamber-furnace 3.4.4 Prefilling process 3.4.5 Simplified piston removal 3.4.6 Piston stop during return stroke 3.5.2 Electric nozzle and gooseneck heating (extended version) 4.5.0 Shut-off facility for hydraulic locking and injection unit 4.6.1.2 Integrated water circuit 2+4 circuits 5.1.0 Machine control DATADIALOG - Realtime Control (RC) 5.1.2 Convenience Package – Casting – 5.2.1 Ejector Pressure graphics in DATADIALOG control 5.4.1 Data logging Scope Codjiu Smbjpfx Aacjhd 5.4.2 Configurable In- and Outputs 5.6.0 Special cable lengths 6.1.3.1 Digital interface for Non-FRECH extractor (Dispo 10) 6.1.4 Serial interface for 4 heating-cooling circuits ROBAMAT 3.1 6.3.1.1 Hanging operating desk with monitor 6.5.2 Service Package RSD with Switch for each additional machine 7.2.2.2 Spraymotion 611 E with servo drive, 1-circuit 7.2.10 Extended spraying program for spraymotion 7.3.1 Lubricant container TD 20 7.4.0.2 Spray rail CR 245 7.12.3 Low noise chute

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Cjdpfxjxdl Ixe Aacshd Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Year of construction: 2019, condition: good (used), Various climate chambers for testing a wide range of products. Example: Vötsch Type: VC 0018 Climate test chamber Air-cooled Codpfjxgrz Rex Aacjhd Test chamber dimensions: Width 580 x Depth 450 x Height 750 mm

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC Cjdpfoxp Rn Usx Aacshd - Connection type: prepared for fixed installation, 32 A plug Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Condition: used, El. heated chamber oven, make Heraeus Type: T 340 Temperature: 250°C Chodpfx Aaoxlr Nleced Clear dimensions (W x D x H): 300 x 280 x 270 mm

Condition: used, Heating Oven Climate Chamber KÖTTERMANN Type 2306 Serial No. 783018 Year of manufacture: approx. 1980 Internal dimensions (W x H x D): 500 x 530 x 620 mm Connected load: 4 kW Power supply: 380 Volt, 50 Hz, 18.2 Amp. - Recirculation fan Cedpfx Aasxf Uxpecohd - Analog temperature controller for heating - Analog temperature controller for cooling - Integrated refrigeration unit - Interior lined with stainless steel No functionality test performed Control system outdated Net weight approx. 250 kg

Condition: used, Used APV Anhydro model PSBD 58 stainless steel spray dryer. Unit rated approximately 50 kg/hour water evaporation rate (depending on product) at inlet/outlet temperatures of 600/140°C. Drying chamber approximately 1600 mm inside diameter x 1800 mm cylindrical height x 1500 mm conical height. Chamber has a safety rupture plate buti is not connected. Outside is insulated and claded by stainless steel plate. Inspection doors 450 x 550 mm. Unit includes (1) top mounted Anhydro nozzle co-current atomiser (could be used rotary atomiser but is not included). Unit includes 2 zones electrical air heater, Herding carbon steel filter, cyclone and ventilator. Electrical switchboard with integrated control panel is included. Has a ....PLC control system. Cjdpfoxpur Dex Aacshd

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Cjdpfx Aoxdi Ezeacehd Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2017, condition: reconditioned (used), overhauled, 12 months warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Entry rails for loading the oven - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric flap can be retrofitted upon request. - Loading trolley available on request (see picture) - Documentation, CE declaration Codpfx Asxp Rn Ioacshd We are happy to offer installation and commissioning. Viewing in our warehouse by appointment. Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, circulating air drying cabinet, circulating air oven.

Condition: used, El. heated chamber oven, make Heraeus Type: BT 5042 Temperature: 250°C Chedpfexlruzex Aacsd Clear dimensions (W x D x H): 390 x 285 x 350 mm

Year of construction: 2017, condition: reconditioned (used), overhauled, 12 months warranty - Max. temperature 200°C; temperature can be increased to 250°C upon request - Internal dimensions: W 1000 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Equipped with Jumo Dicon Touch controller - Entry rails for loading the oven - Heating capacity: 36 kW - Net weight: 780 kg - Exhaust nozzle; exhaust fan and electric flap can be retrofitted upon request. - Loading trolley available on request (see picture) - Documentation, CE declaration Chjdpfexp Rnujx Aacsd We are happy to offer installation and commissioning. Viewing in our warehouse by appointment. Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber oven, baking oven, circulating air drying cabinet, circulating air oven.

Condition: used, El. heated chamber oven, make Heraeus Csdjxlq Tpjpfx Aacshd Type: PL 320 Temperature: max. 650°C Clear dimensions (W x D x H): approx. 280 x 440 x 200 mm

Year of construction: 2018, condition: new, Double chamber furnace, make VEI-Engineering type: KA_GB 10.14.14/d max. temperature: 550°C fan power: 2 x 4 kW heating: natural gas burners power: 2 x 100 kW useable dimensions per chamber Codpfxsdyvips Aacehd width: 1.000 mm height: 1.400 mm depth: 1.400 mm

Year of construction: 2018, condition: new, High temperature chamber furnace, make VEI Chedpfsdyvkyjx Aacjd max. temperature: 1.200°C useable dimensions (w x h x d): 2750 x 500 x 1.100 mm heating power: electrically, 42 kW