Used Scm Si 400 Nova for sale (630)

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, Connected load 480V 42kW 108A, extraction connection 5x120 + 2x150 mm, 1x jointer unit, 2x vertical spindle units, 1x thicknessing unit, 1x universal unit top, 1x universal unit bottom, spindle diameter 40 mm, lubricant pump, pneumatically controlled pressure rollers, connection 6 bar, electric bridge adjustment, central lubrication, stepless feed via frequency inverter, total length 4200 mm, depth 2000 mm, height 1700 mm – as returned by customer Fpsdpfx Ajx E T Dmshpji

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, grinding width: 1,350 mm, SCM Wide Belt Calibration and Fine Sanding Machine Model: dmc sd 60 RCS 135 Technical Specifications: Working width: 1,100 mm Min./max. working height: 4–170 mm Abrasive belt width: 1,120 mm Abrasive belt length: 2,150 mm Main motor power: 11 (15) kW (HP) Gear motor: 0.45/0.8 (0.6/1.1) kW (HP) Feed speed: 4.5/9 m/min Standard equipment: - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position Fpedpotwqn Ssfx Ahpji - Hard sanding pad with manual working height adjustment - Motor power for unit 1: 11 kW (15 HP) - Electronic ammeter for main motor indicating current draw - Electronic work height display - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before first unit - 60 Shore rubber feed belt - Roller table with two rollers at infeed and outfeed of working table - Feed belt with two speeds 4.5 / 9 m/min driven by gear motor - Automatic belt centering Including the following special accessories: 1 pc. version "B" for RCS with: pneumatic on/off for roller 1st unit “R” + pneumatic on/off for roller 2nd unit “CS” + “MESAR” elastic segmented sanding pad + pneumatic on/off for sanding pad unit + electronic programming unit “LOGIC 50” + electronic working height adjustment 1 pc. CE safety standards 1 pc. roller table at infeed and outfeed for long workpieces, equipped with 5 non-driven rollers 1 pc. "RA" diagonally grooved steel contact roller, 1st unit 1 pc. main motor 15 kW 1 pc. abrasive belt wear optimizer 1 pc. LED interior lighting 1 pc. door with viewing window on rear side 1 pc. Logic SC control

Condition: used, Year of construction: 1994, Motor 6 / 7.5 kW with 4-roller feed, fixed speeds. Speed extensions. Height of worktable: 920 mm. Spindle tilting: -10° + 45°. Max. spindle projection above table: 175 mm. Spindle speeds: 3250/6500-5000/10000 rpm. Max. tool diameter: 250 mm. Weight: approx. 950 kg. Location: Nattheim. Fodjw Enw Ijpfx Ahpopi

Condition: used, Year of construction: 2015, machine/vehicle number: MR007049, Used: SCM edge banding machine, in very good condition. Complete machine, ready for immediate use. Used: Edge banding machine, manufactured by SCM – model Olimpic K360 T-ER13 Fjdpfszgwzvjx Ahpopi Equipped with the following options: - Machine complies with European CE standards - Anti-adhesion spray unit AAR - Glue scraper unit RC-V - Brush unit SP-V - Touch 7 control – 7'' touchscreen control (including the ability to store up to 60 programs) - AUTOSET for T-ER1 3 positions for R-K flush-trimming unit 2 positions for round-over unit pneumatic on/off switching of the glue scraper unit - Nesting sensors for the machining units The machine is equipped with the following units: – Pre-milling unit with 2 motors – with compressed air cleaning after milling – Spray unit, sprays after pre-milling, to prevent adhesion of the glue to the surface. – Glue unit, with dual temperature setting for selecting, for example, PU and EVA glue. – Trimming unit for cutting off the edge band. – Milling unit with solid guide rollers, for a perfect milling operation along the surface. – Round-over unit, for milling rounded edges or bevels. – Radius scraper unit for a perfectly smooth finish (R=2). – Spray unit, for dissolving the glue and applying a sheen. – Glue scraper unit, for removing glue residues on the surface. – Brush unit for polishing the glued edge. Technical specifications: - Min./max. band thickness: 0.3-3 mm - Feed speeds: 11 m/min - Minimum panel thickness: 8 mm - Maximum panel thickness: 50 mm - Weight: 1433 kg - Serial number: AH/118707

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 3,710 mm, travel distance Y-axis: 1,620 mm, number of axes: 5, spindle speed (max.): 24,000 rpm, This 5-axis SCM Morbidelli M200F was manufactured in 2020. It features an impressive X-axis working range of 3710 mm and a Y-axis working range of 1620 mm. The machine is equipped with a high-performance 5-axis Prisma 5 electric spindle, capable of speeds up to 24,000 rpm. If you are looking to get high-quality CNC processing capabilities, consider the SCM Morbidelli M200F machine we have for sale. Contact us for further details. • Working width: 1585 mm • Workpiece length for pendulum machining: 1700 + 1700 mm • X-Y axes travel speed (PRO-SPACE): 56 m/min • X-Y axes travel speed (PRO-SPEED): 78 m/min • Remote control with 7" touchscreen display • TRB14 tool changer with pneumatic remote adjustment • Max. 14 tools • Max. tool diameter: 300 mm (3-axis), 350 mm (5-axis) Fpedpfx Ahezha Twjpji • FAST14 tool changer • Max. 14 tools • Tool diameter: 180 mm • Axis spacing: 7 positions with 110 mm spacing; 7 positions with 130 mm spacing • Blow-off nozzle system on the electric spindle • 5-axis Prisma 5 electric spindle, “KS” version • HSK 63F • Rotational speed: 1,800–24,000 rpm • Power (S1/S6): 11/12 kW at 15,000 rpm • Clockwise and counterclockwise rotation programmable via NS • Coolant circulation system • High-performance vacuum pump: 300/360 m³/h, 50/60 Hz • Work table divided into 8 vacuum zones • Laser system for positioning the suction cups • eye-M PRO console with integrated PC • Maestro CNC software

Condition: good (used), Year of construction: 1991, Table saw Fpjdozhlrrjpfx Ahpoi Manufacturer: SCM Type: T 130 Year of manufacture: 1991 Table: 1200 x 730 mm Power: 4 kW Spindle: 30 mm Reversible rotation Including feed mechanism

Condition: used, Used machine Equipment and technical data: High-performance multi-blade saw Fodezk N Ucopfx Ahpspi Heavy-duty cast iron construction Robust transport chain consisting of directly interconnected precision links Wear-resistant guide surfaces of the transport chain with an extremely low coefficient of friction Automatic chain lubrication 4-point saw spindle bearing for maximum stability Saw bush with conical seat and self-centering function 4 pressure rollers for precise cuts, even with thin workpieces 4 slitting and recoil finger rows Cutting height up to 110 mm with a 350 mm saw blade diameter Minimum cutting length 250 mm Clamping width of the saw bush 300 mm Minimum and maximum saw blade diameter 200/350 mm Saw spindle speed 4200 rpm Feed rate 4-48 m/min Transport chain width 300 mm Saw bush diameter (with 2 wedges 20 x 5 mm) 70 mm Work table height 750 mm Dust extraction connection diameter 200 mm Air volume at 25 m/s 3500 m³/h Motor 25 kW Feed motor 1.1 kW With laser guide light 1800 kg Sound emission 98.3 dB W (A) at idle speed without dust extraction During operation 107.1 dB W (A) Workplace-related emission level 81.8 dB W (A) at idle speed without dust extraction During operation 91.2 dB W (A) Availability: short-term Location: 63934 Röllbach Condition appropriate for its age

Condition: used, Used machine Equipment and technical data: Versatile copying router with extremely short setup times, both when switching from manual operations to automatic operations, and when changing between various automatic machining processes. The automatic template feed system (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the router tool. The automatic copying roller and pressure roller can be removed in seconds. This makes the machine ready for individual and custom jobs performed manually. Distance between tool axis and stand: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Fedpfx Ahjzk N Tlspspi Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Motor power, template feed system: 0.14 kW Template feed speed: 1.5 - 12 m/min Number of adjustable turret depth stops: 6 Dimensions: approx. 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short-term Storage location: 63934 Röllbach

Condition: used, Used machine Equipment and technical data: - Heavy-duty cast iron construction - Motor: 5.5 kW - Spindle diameter: 30 mm - 2900-4400-6000-7800-10000 rpm - Height and swivel adjustment: electric motor - Fine adjustment: by handwheel - with Panhans metal stop jaws - with Holz-Her 3-roller feed mechanism Availability: short-term Location: 63934 Röllbach in accordance with its age. Fodszk N R Depfx Ahpepi

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 The T 110 is the table milling machine from SCM, which offers an optimal combination of quality and an affordable purchase price. The construction is extremely stable. For convenient operation, all controls are arranged within easy reach on the front of the machine. Precise height adjustment of the tool is ensured by a mechanical display. Spindle inclination from -5 to +45 degrees. Table size 1000 x 750 mm Spindle clamping length 140 mm Spindle overhang 20 mm Spindle speeds 3000-4500-6000-9000-10000 rpm Max. diameter of tool that can be lowered below the table: 320 x 40 mm Profiling tool max. 250 mm Fpodpfxozk N Rdo Ahpji Motor 4 kW Dust extraction port 120 mm With 3-roller feed device Weight 520 kg Availability: short-term Location: Röllbach in accordance with its age

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Equipment and technical data: Versatile copy router with extremely short setup times, both when switching from manual operations to automatic processes and when changing between various automatic machining operations. The automatic template feed (consisting of a central copy roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the router tool. The automatic copy roller and pressure roller can be removed in seconds. This makes the machine free for individual and custom jobs by hand. Distance between tool axis and column: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Fsdpfszk N Nysx Ahpopi Motor power: 4 kW Motor power, template feed: 0.14 kW Template feed speed: 1.5 - 12 m/min Number of adjustable turret depth stops: 6 Dimensions: approx. 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short notice Location: 63934 Röllbach Condition commensurate with age

Condition: used, Used machine Equipment and technical data: Versatile copy router with extremely short setup times, both when switching from manual operations to automated processes, and when changing between various automated machining operations. The automatic template feed system (consisting of a central copy roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the milling tool. The automatic copy roller and pressure roller can be removed in seconds. This makes the machine free for individual and special custom work. Distance between tool axis and stand: 915 mm Fjdjzk N Ntjpfx Ahpspi Spindle stroke: 105 mm Table stroke: 180 mm Maximum clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Motor power, template feed system: 0.14 kW Template feed speed: 1.5 - 12 m/min Number of adjustable turret depth stops: 6 Dimensions: approx. 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short notice Location: 63934 Röllbach in good condition for its age.

Condition: used, Year of construction: 1986, Used machine Year of manufacture: 1986 Equipment and technical data: Motor: 4 kW Speeds: 3000 / 4500 / 6000 / 8000 / 1000 rpm Spindle height adjustment via handwheel Installation dimensions: 1200x80x1350 mm Fpjdpfx Ahszk Nw Ropji Stop jaws made of wood Includes Holz Her 3-roller feed system, including stand With chassis Availability: short notice Location: Röllbach Condition commensurate with age.

Condition: used, Used machine Equipment and technical data: - Vertical travel of the spindle: 150 mm - Spindle diameter: 30 mm - Spindle speeds: 3500 - 7000 rpm - With fixed spindle - Motor: 2.5-3.1 hp Fjdpfx Ahozk Nt Sspopi - Table: 830 x 700 mm - Slotting discs up to 340 mm - With metal jaw clamping system (Note: The Aigner parallel fence shown in the pictures is not included in the scope of delivery!) - With 3-roller feed Weight: 240 kg Availability: short-term Location: Röllbach In age-appropriate condition.

Condition: used, Used machine Equipment and technical data: - 4-knife planing cutterhead - Feed speed 7.5/15 m/min - Surfacing: - Working width: 500 mm - Total table length: 2200 mm - Motor: 4 kW - Thicknessing: - Minimum working height: 3 mm - Maximum working height: 235 mm - Maximum chip removal: 8 mm - Digital display of height adjustment with decimal display Availability: short notice Fpjdpfxjzk Np Hs Ahpei Location: 63934 Röllbach Condition commensurate with age

Condition: used, Used machine Jointer: Working width: 500 mm Total table length: 2200 mm 4-knife cutterhead with segmented planer knives Motor: 4 kW Thickness planer: Min. working height: 3 mm Max. working height: 235 mm Max. chip removal: 8 mm Digital height adjustment display with decimal readout Feed speed: 7.5/15 m/min Availability: short-term Storage location: Flörsheim Fodsza I Tkjpfx Ahpspi

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Work table dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. depth of cut in one pass: 8 mm Min. workpiece length: 260 mm Cutter shaft diameter: 120 mm 4 Knives: 35 x 3 x 640 mm Cutter shaft speed: 4,500 rpm Feed speed electronically adjustable: 4–20 m/min Feed motor (S6 -40%): 1.3 kW Extraction connection diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table elevation with 2 speeds and micrometric adjustment - Thickness table with vertical movement via 4 steel-threaded spindles - Electronic control with 2 axes for setting: * the input value of the thickness table * the feed speed - Stepless feed speed adjustment from 4 to 20 m/min via inverter - Feed speed automatically adapts in relation to the main motor’s maximum power consumption - Upper ribbed steel roller at infeed - Two upper rubber-coated feed rollers at outfeed - Replaceable feed rollers - Independent pneumatic pressure regulation of the upper feed rollers - Motor power: 9 kW 50 Hz (11 kW 60 Hz) with automatic star-delta starting: * S1: 7.5 kW / 10 HP / 50 Hz (8.8 kW / 12 HP / 60 Hz) * S6 -40%: 9 kW / 12 HP / 50 Hz (11 kW / 15 HP / 60 Hz) Safety/Protection Fpjdsy D U A Iopfx Ahpji - Noise dampening protection at infeed and outfeed - Micro safety switch at protective cover - Emergency stop switch at front and rear of the machine - Lockable main switch - Motor protection switch - Low-voltage circuit (110 Volt) - Automatic motor brake - CE Declaration of Conformity Product code: S 7 109999 Standard safety regulations 530314 TERSA – Cutter shaft (monoblock version) with disposable double-edged knives 083201 Base frame 930731 Volt 400 EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1987, Used machine Year of manufacture: 1987 Condition: workshop-inspected Column extension: 750 mm Spindle stroke: 100 mm Fjdpfx Ahow I U Udjpepi Max. clearance between table and spindle: 310 mm Spindle speed: 10,000/20,000 rpm Motor power: 2.2/3.3 kW Tool clamping: collet chuck With air blast device via compressed air connection External dimensions: 905 x 1380 x 1600 mm Weight: 533 kg Availability: by arrangement Location: Hochheim

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical data: Gluing, max. 8 - 55 mm Incl. rotating control panel HF joining unit, 2-motor Incl. quick-heating tank, interchangeable, Teflon-coated Fpodpfx Ahew Nadgopoi Incl. electronic positioning of the pressure rollers Incl. swiveling double miter saw unit Incl. flush trimming unit Incl. program-controlled chamfering, radius and corner copying unit with nesting package Incl. radius pull blade with nesting package Incl. surface pull blade Incl. grooving unit Incl. edge trimming unit Incl. spray unit Availability: short notice Location: Flörsheim

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces Fpsdsx Nbzuepfx Ahpji - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Fsdpfx Aheyymz Uepjpi Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 10,300 mm, total width: 2,450 mm, Colour: Grey Empty weight: 6.600 kg Price: On request - Year: 2014 - Documentation available: No - CE marking present: Yes Fpsdpfx Aheytcl Iopei - CE certificate present: No - Serial number: AA2/002546 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 11 - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - └ Motor power [kW]: 3 - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 24 - System/software: Xilog plus - Safety feature: Safety light curtain, Door interlock switches, Enclosed fence - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Vtlf 250 - └ Year of manufacture: 2008 - └ Main motor power [kW]: 5.5 - └ Connection diameter [mm]: 70 - └ Oil free: Yes - Tools included: Yes - CNC options: Offcut conveyor, Manual control - CNC documentation available: USB stick - Table length [mm]: 5200 - Table width [mm]: 1300 - Voltage [V]: 400 - Current consumption [A]: 64 - Transport dimensions: 10300mm x 2450mm x 2800mm (l x w x h) - Transport weight [kg]: 6600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, operating hours: 9,974 h, total height: 2,700 mm, total length: 7,700 mm, total width: 2,420 mm, Empty weight: 7.390 kg CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Fodpfx Ahewnhccepspi Disassembled for transport Weight 7450kg - Details: - └ Description: Machine gives malfunction spindle - Year: 2012 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA2/002032 - Operating hours: 9974 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor - Working range X [mm]: 5020 - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 - Transport dimensions: 7700mm x 2420mm x 2700mm (l x w x h) - Transport weight [kg]: 7390kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2017, total height: 1,800 mm, total length: 4,800 mm, total width: 1,000 mm, Colour: Grey Price: On request Fpedpfjyll Snox Ahpsi - Details: - └ Description: Machine is currently giving fault, error code empty machine - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 9 - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Corner rounding unit - - Tools available: Yes - └ 6th unit type: Radius scraping unit - - Tools available: Yes - └ 7th unit type: Corner rounding unit - - Tools available: Yes - └ 8th unit type: Flat scraping unit - - Tools available: Yes - └ 9th unit type: Brushing unit - - Tools available: Yes - Glue system: Glue pot - Voltage [V]: 400 - Current consumption [A]: 42 - Transport dimensions: 4800mm x 1000mm x 1800mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2011, total height: 2,000 mm, total length: 8,400 mm, total width: 1,080 mm, Colour: Grey Weight: 3.500 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/335516 - Number of units [pcs]: 12 - └ 1st unit type: Spraying device Fpjdpfsyudwzjx Ahpoi - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: Corner rounding unit - - Tools available: Yes - └ 7th unit type: Radius scraping unit - - Tools available: Yes - └ 9th unit type: Flat scraping unit - - Tools available: Yes - └ 10th unit type: Brushing unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 68 - Fuse [A]: 68 - Transport dimensions: 8400mm x 1080mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels