Used Sectioner for sale (2,353)

Condition: good (used), Veneer press OTT 300 K-DSP 30 tons pressing force Iedpfxjxk Urao Ag Noih Year of manufacture: 1993 Max. format: 480 cm length, 150 cm width Press height: 88 cm. Includes mobile scissor lift table on rails, dimensions LxW approx. 141x103.5 cm, extendable up to 300 cm, height-adjustable outfeed roller conveyor dimensions LxW approx. 480x180 cm, 2-section, 2-way pneumatic roller conveyor, total dimensions LxWxH 500x103x92 cm. Required footprint for the entire unit is approx. 600x570 cm.

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Iiodpfx Agjwg Takj Njh Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: excellent (used), fuel type: diesel, color: yellow, lifting height: 58,000 mm, first registration: 01/2016, mast type: telescopic, Year of construction: 2016, Drive: Wheeled Payload: 65,000 kg Gross vehicle weight (GVW): 42,388 kg Mast: Telescopic (4 sections) Mast length: 58 m Ijdpfx Agowud E Tj Njih Lifting capacity: 65,000 kg Superstructure make: GROVE RT765E-2 Technical condition: very good Visual condition: very good

Condition: good (used), punching force: 36 t, – Capacity: 36 tons – Hydraulic – 3 stations – Foot operation – Lighting Iiodpfxjwdg Ipo Ag Noh – Emergency stop – 400V

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 5.6 ft, color: grey, overall weight: 10,000 kg, maximum load weight: 9,216 kg, empty load weight: 784 kg, loading space volume: 7 m³, loading space width: 1,720 mm, loading space length: 3,740 mm, loading space height: 1,500 mm, Price on request. The price is ex stock 33106 Paderborn! Bulk discount available for the purchase of multiple containers. Leasing/hire purchase possible. 1 unit available directly from stock, RAL 3001 18 units available directly from stock, RAL 7043 12 units available at short notice, RAL colours of your choice Other designs and sizes available ex stock Paderborn. You are welcome to view our inventory on our homepage. Skip container according to DIN 30720 Technical specifications: • Internal dimensions: 3485 x 1720 x 1500 mm • Capacity: 7 cbm • Unladen weight: 773 kg • Base: 6 mm S 235 • Sides: 4 mm S 235 • All sheets and profiles continuously welded • Container inspected and approved according to DGUV 114-010 • Corner reinforcements • 3-way tipping bearing on both sides (bolt Ø45) Iiodpfx Asw D A Hhsg Noh • L-section stacking bar • Locking bar • Frame edges U-profile 80x50x4 • Interior and exterior zinc phosphate primer; exterior • finished with synthetic resin paint (80-100 μ) • Permissible total weight: 10,000 kg Errors and prior sale excepted. Photos are for illustration purposes only! For further inquiries, feel free to send us a message or call us.

Year of construction: 2019, condition: used, Horizon CV8-3 Conveyor belt + cooling section - length: 3m - Height adjustable: approx. 600mm - 900mm - Conveyor belt width: 345mm Iiedjxmgzrepfx Ag Nsh - weight: 50kg net. We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Iodpfxexnlgcj Ag Njih

Year of construction: 2000, condition: excellent (used), TORNOS DECO 2000 CNC automatic lathe TECHNICAL DATA Dimensions and weights Dimensions: length: 2000 mm width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor load: Approximately: 8 daN/cm2 Axles 1 movable headstock: Z1, S1 2 independent linear Tooling system on the vertical: X1 / Y1 (S6) - X2 / Y2, S2 1 front attachment, 4 spindles: X3 / Z3 1 independent pick-up spindle: Y4 / Z4, S4 1 independent tooling system in backworking: X4 (S5) General data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Max. Workpiece length: With rotating guide bush: 180 mm Work in clamp: 30 mm Main spindle speed: 12000 rpm Spindle rotation direction: Preferably: To the right Motorization main spindle: Continuous operation: 2,2 kW Intermittent duty: 3,7 kW Motorization tapping spindle: Continuous operation: 1,5 kW / Intermittent operation: 2,2 kW Headstock clamp type: F20 Iedjmdn Imepfx Ag Nsih Guide bushes: rotating, fixed Type of F'bushing tongs: Master: 605 Number of tools in main operation: Fixed: 2 x 5 / Rotating: 3 + 3 Number of front tools: Fixed: 4 / Rotating: 3 Cross section of tools: 12 x 12 Tool tongs: Rotating Standard: ESX 20 Number of tools in backworking: Fixed: 3 + 3 / Rotating possible: 3 + 3 Bar feeder: Yes Parts removal: Basic version Machine type: Moving headstock Machine axis height: 1100 mm Headstock travel: 255 mm Bar guide position: To the right of the user Bar passage: 1-16 mm Telescopic tube passage: Bore: 6-17 mm Speed: Left / right: -12000 to 12000 rpm Headstock feed speed: Max. 20 m/min We do not take any responsibility for the correctness, completeness and up-to-dateness of the information.

Condition: excellent (used), power: 191 kW (259.69 HP), fuel type: diesel, color: white, lifting height: 56,080 mm, first registration: 06/2014, mast type: telescopic, Year of construction: 2014, Drive: Wheel Number of cylinders: 6 Mast: Telescopic (4 sections) Mast length: 56.08 m Lifting capacity: 110,000 kg Superstructure brand: TEREX TR110 QUADSTAR 1100 + JIB Technical condition: very good Visual condition: very good Iiedpfxjwudg Do Ag Nsh

Condition: used, Year of construction: 2010, functionality: fully functional, Well-maintained Octofrost IQF 7/2 LH tunnel freezer operating on ammonia (NH3). IQF stands for Individually Quick Freezing, specially designed for rapid freezing of small food items. This process helps to prevent ice crystal formation in the structure of products such as vegetables, berries, cheese, meat, and fish. The freezer is complete with infeed/outfeed, control panels, evaporators, and a Siemens Simatic panel control system. Of course, we can also supply other refrigeration technology, such as compressors and condensers. Please feel free to contact us for more information! Products are placed onto the infeed conveyor at a height of approximately 1560 mm. The products are then transported through the Octofrost via a vibratory belt. The belt features a drop section to separate products and remove excess external ice. The belt is approximately 8100 mm long and 850 mm wide. Once the product is frozen to the correct core temperature, it exits at a height of 1250 mm. The freezer has three inspection hatches for checking product quality while it is on the belt. The OctoFrost is equipped with two NH3 evaporators, ensuring products are frozen to the desired core temperature of -18°C. There are 7 centrifugal fans, each directly driven by an ABB M3AA 132 MB electric motor, specified as: 50 Hz - 11 kW - 1450 rpm - 630 mm diameter. These fans blow air from below through holes in the belt, preventing products from freezing onto the belt. The side panel is extendable for easy inspection and cleaning of the evaporators and fans as needed. Additionally, the Octofrost comes with the corresponding control cabinet, which features 7 ABB frequency inverters for the conveyors, 3 Key Technology MFS 268 XL frequency inverters for belt vibration, and a Siemens panel for freezer controls. The IQF tunnel freezer has the following dimensions: 8100x3000x3250 mm (LxWxH) Effective belt length: 8100 mm Effective belt width: 850 mm Infeed height: 1560 mm Outfeed height: 1250 mm Tunnel freezer performance specifications: Product: Green peas Capacity: 3,600 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Product: Cauliflower Capacity: 2,520 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: 25 to 40 mm Product: Tomatoes Capacity: 1,440 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: approx. 30 mm Product: Strawberries Capacity: 2,520 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: 25 to 35 mm Iijdoxgcvxjpfx Ag Noh Product: Potatoes Capacity: 1,800 kg/h Infeed temperature: +10°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: approx. 25 mm Product: Meat Capacity: 2,340 kg/h Infeed temperature: -3°C Outfeed temperature: -18°C Evaporation temperature: -40°C Piece size: 20 mm cubes Do you want more information or have any questions? Feel free to contact us—we are happy to assist you! *Why choose HOS BV? We are not only the largest specialist in used refrigeration technology in Europe, but we only deliver after thorough testing and industrial cleaning. If desired, we can also handle your logistics.

Condition: used, mileage: 219,000 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 10/2017, loading space length: 3,300 mm, loading space width: 2,100 mm, emission class: euro6, color: white, number of seats: 7, total length: 6,678 mm, total width: 2,100 mm, total height: 2,360 mm, Equipment: ABS, air conditioning, central locking, soot filter, Chat via WhatsApp now: Quick & straightforward contact with our sales consultant. Attention! Preferential sale to commercial customers. Iodpfx Aoxl N Apsg Noih Internal ID number: [2922] ----Optional add-ons: * 12–64 months warranty (valid EU-wide) * New inspection * New TÜV (roadworthiness test) & emissions certificate (AU) * Nationwide delivery * Financing possible even without down payment ----Vehicle Highlights: * 19% VAT deductible * 1 previous owner * German vehicle * Regularly serviced * Euro 6 emissions standard * Maxi long wheelbase * Platform length = 3,300 mm * 7 seats * Towbar (trailer hitch) = 3,000 kg * Special equipment: Air conditioning, towbar, electrically adjustable and heated exterior mirrors, roof storage/roof gallery front, reinforced rear suspension, reinforced alternator Additional equipment: Driver's airbag, exterior mirrors with wide-angle section, integrated indicators in exterior mirrors, body/type: platform double cab standard, fuel tank: 90 L, height-adjustable steering column (steering wheel), engine 2.0 L – 96 kW Blue-HDI FAP KAT, wheelbase 4,035 mm, spare wheel with same specification as regular tires, low emission according to Euro 6, SCR system (AdBlue technology), side protective strips, seat cover/upholstery: fabric, cab seats: double passenger seat, cab seats: driver’s seat with lumbar support, permissible gross weight 3.5 t ----Interested in leasing or financing? We offer attractive terms – financing also possible without down payment! Please feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Business hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Note: All information provided online is non-binding and serves only for general vehicle description. Subject to errors, typographical mistakes, and prior sale. The definitive specification of the vehicle is determined exclusively by the local purchase contract or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to commercial clients.

Condition: new, Year of construction: 2024, machine/vehicle number: MH-FJ-1A, The VOGEL MH-FJ-1A carton sealing machine has a side drive belt system and an additional drive belt in the upper section of the machine. The advantage lies in the stability - high cartons cannot tip to the side. Carton formats: Length 150 - ∞ mm Width: 120 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors. Iisdpsxf Dkbjfx Ag Noh

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 MAIN FEATURES 5-AXIS MACHINING UNIT "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE MATIC PROGRAMMING" WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (inside stop) mm 3,680 Working area Y-axis (max. loadable piece on rear stops) mm 1,680 Workpiece passage Z / number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Travel speed X-Y axes Pro-Speed m/min 85 Z-axis speed m/min 30 INSTALLATION Installed power KVA 62÷82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL CHARACTERISTICS CNC-controlled drilling and milling center in gantry design and work table with workpiece supports, for carrying out: - vertical drilling on the panel surface - horizontal drilling on all four sides of the workpiece - groove milling with disc milling cutters - general milling work 3-4-5 axes MACHINE STRUCTURE The basic structure is a monolithic construction made of thick-walled steel. It is stiffened by welded reinforcements across the entire machine bed, making it extremely stable. The table shape used, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow with a minimum of space requirements. The mobile gantry support is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via recirculating ball slides. On this mobile unit carrier, the work unit is mounted on prismatic, ground guides and recirculating ball slides. All axes are moved on large-section prism linear guides and recirculating ball bearings with a large contact surface, ensuring optimal gliding even at the highest speeds and accelerations. Precise and rapid positioning of the movable gantry (X-axis) is achieved by a pinion and rack with helical teeth. Large-section recirculating ball screws ensure precise positioning of the work unit along the movable gantry (Y and Z axes). MOTORS, DRIVES AND INVERTERS Perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors, designed to achieve speeds of up to 90 m/min while ensuring the best finishing quality. CONTROL The control unit consists of a numerical control for milling and drilling machines with "Xilog Maestro" graphical user interface based on the Windows 7 Office operating system. 17-inch LCD color screen. QWERTY keyboard. Tilting control panel. Machine interface with Xilog Maestro software. Xilog Maestro Features Programming Parametric graphic programming Import of DXF files (2D; SPLINE, POLYLINE 3D geometries), linear or circular interpolation in three axes, linear in space, spiral in the selected plane. Programming with graphic and syntax aids for drilling and milling operations Automatic optimization of drilling operations and tool change cycles Possibility of Plate zero point shift for drilling on inclined or curved plate sides Iiedpfsxnldbsx Ag Nsh

Condition: used, mileage: 750,482 km, power: 340 kW (462.27 HP), fuel type: diesel, color: orange, axle configuration: 8x2, tire size: 3858/55 R 22.5, fuel: diesel, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, loading space width: 2,500 mm, loading space length: 6,300 mm, loading space height: 1,040 mm, Year of construction: 2012, Equipment: ABS, air conditioning, cruise control, differential lock, onboard computer, traction control, trailer coupling, = Additional Options and Equipment = - Airbags - Alarm system - Aluminum fuel tank - External thermometer - Heated mirrors - Passenger seat - Leaf suspension - Car kit - Roof hatch - Differential lock - Digital tachograph - Electric windows - Electrically adjustable exterior mirrors - Electronic Braking System (EBS) - ESP (Electronic Stability Program) - Lift axle - Air conditioning - Power steering - Air suspension - Air-suspended seats - Air horn - Fog lights - Radio/CD player - Side door - Sun visor - Stability control - Pre-heating system - Toolbox - PTO (Power Take-Off) - Central locking - Towing eye = Further Information = Iiedpfx Agjxg Izts Noh General Information Year of manufacture: Jan. 2012 Drivetrain AdBlue system: Yes Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55 R 22.5; Max. axle load: 9,000 kg; Steering; Left tire tread: 40%; Right tire tread: 50%; Suspension: Leaf springs Front axle 2: Tire size: 385/55 R 22.5; Max. axle load: 9,000 kg; Steering; Left tire tread: 40%; Right tire tread: 20%; Suspension: Air suspension Rear axle 1: Tire size: 315/60 R 22.5; Twin tires; Differential lock; Max. axle load: 11,500 kg; Left inside tire tread: 50%; Left outside tire tread: 40%; Right inside tire tread: 40%; Right outside tire tread: 30%; Reduction: single reduction; Suspension: Air suspension Rear axle 2: Tire size: 355/50 R 22.5; Lift axle; Max. axle load: 7,500 kg; Steering; Left tire tread: 30%; Right tire tread: 30%; Suspension: Air suspension Weights Unladen weight: 24,400 kg Payload: 12,600 kg Gross Vehicle Weight (GVW): 37,000 kg Functionality Mast: Telescopic (8 sections) Crane: Yes Body make: HIAB 855 E-8 HiPro CE certification: yes

Year of construction: 2008, condition: good (used), machine/vehicle number: 1396, This listing is for a 2008 MASCHINPLEX Sortomat 6D Tablet Sorter. Sorters by MASCHINPEX are used for fully automatic checking of pharmaceutical and confectionery products. The SORTOMAT sorts regarding thickness. The DIASORT checks the product regarding diameter and length. The combination model SORTOMAT D sorts regarding thickness plus diameter and length. The product to be sorted is fed from the feed hopper to the sorting section via an adjustable gate and a vibratory feed chute. In the DIASORT the product is guided over two layers of vibrating format perforated platens where they are separated in oversizes, good product and undersizes. In the SORTOMAT the product is canalised and fed to the sorting rollers. These can be adjusted to the desired tolerances without any format parts and separate the product in the fractions too thin, good and too thick. The SORTOMAT D first guides the product over the diameter sorting unit and then checks regarding thickness. Iedpfxegk Df Ds Ag Nsih Stock ID: BFPL073

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Machine number: 133 Machine has been completely overhauled New Glue Jet 301 gluing system (top section, 1 mm) All units inspected All cutters re-sharpened All knives replaced - Electrical system for stepless feed, 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 jointing cutters for trimming panel edges - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit 1801 / 1802 - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit 1801 / 1802 - Edge feed 1901 fully automatic - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - Granulate supply hopper - Pressure unit 1913 MOT - Pneumatic end trimming unit 1918 (60 mm) - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profiling unit 1833 MOT4 - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2 - HW reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 Ijdpfewka Iiex Ag Neih - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: Flörsheim

Condition: excellent (used), functionality: fully functional, Complete factory for sale, currently in operation, including fabric samples of ongoing production. Full customer portfolio and comprehensive technical documentation included. Machine List: KARL MAYER RASCHEL RJSC-4F-NE 230/584/18, with creel 844xx, 2 units, year 1997 KARL MAYER RASCHEL RJSC-4F-NE 230/584/18, with creel 831xx, 2 units, year 1996 KARL MAYER RASCHEL 5/2 F-NE, two Jacquard bars, 130/330/14/14, with two creels 626xx, 2 units, year 1984 KARL MAYER RASCHEL 5/2 F-NE, two Jacquard bars, 130/330/7/14/7, with two creels 626xx, 1 unit, year 1984 KARL MAYER RASCHEL RG4N-1K, 130/330/20, 555xx, 1 unit KARL MAYER RASCHEL RMJG 5-F, 130/330/7/14, with creel 543xx, 1 unit, year 1979 KARL MAYER RASCHEL RJG 5F-NE, 130/330/7/14, with creel 582xx, 2 units, year 1988 KARL MAYER RASCHEL RJMSG 4F-NE, 130/330/14, with creel 762xx, 5 units, year 1991 KARL MAYER RASCHEL RJMSG 5F-NE, 130/330/14, with creel 744xx, 2 units, year 1990 KARL MAYER RASCHEL RJMSG 5/2 F-NE, two Jacquard bars, 130/330/14/14, with two creels 744xx, 5 units, year 1990 KARL MAYER RASCHEL HDRJ 5/2 PLM, two Jacquard bars, 130/330/16/16, with two creels 677xx, 3 units KARL MAYER RASCHEL RJMSG 4F-NE, 130/330/14, with creel 763xx, 1 unit, year 1991 Iijdpfx Ajxlt Rqjg Noh KARL MAYER RASCHEL RJG 5/2 F-NE, two Jacquard bars, 130/330/14/14, with two creels 654xx, 4 units, year 1984 KARL MAYER RASCHEL RJG 5/2 F-NE, two Jacquard bars, 130/330/14/14, with two creels 683xx, 2 units, year 1986 KARL MAYER KS3, 130/330/28, 553xx, 1 unit KARL MAYER KS2, 130/330/28, 531xx, 1 unit KARL MAYER SECTIONAL WARPER G8, 14, 221x, 1 unit KARL MAYER SECTIONAL WARPER DS21, 14x21, 287x, 1 unit SCHWEITER BOBBIN WINDER, 48 heads, MC 82x, 1 unit M-TEC 4-ply fabric folding machine, 330, 740x, 1 unit, year 1997 For further details or to arrange an inspection, please contact us.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: MH-FJ-1A, The VOGEL MH-FJ-1A carton sealing machine has a side drive belt system and an additional drive belt in the upper section of the machine. The advantage lies in the stability - high cartons cannot tip to the side. Carton formats: Length 150 - ∞ mm Width: 120 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Accessories: Iiedpexf Dhtsfx Ag Noh For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Technical details turning diameter 570 mm turning length 1500 mm control Siemens SINUMERIK 810D weight of the machine ca. 5,2 t dimensions of the machine ca. 6648 x 2735 x 1973 mm Additional information Centre height over flat track 280 mm Diameter over bed 570 mm Diameter over cross slide 365 mm x-axis 345mm x-axis feed max. 2500 mm/min z-axis feed max. 5000 mm/min x-axis rapid traverse max. 5000 mm/min z-axis rapid traverse max. 10000 mm/min x-axis feed force 7,100 N z-axis feed force 12500 N Feed control 0% - 120% max. workpiece weight from front edge of clamping device 400 kg with tailstock 1000 kg with tailstock and 1 steady rest 1300 kg with tailstock and 2 steady rests 1600 kg Main spindle: Spindle / bore / spindle Ø in the front bearing DIN 52027 - A 8 / Ø62 / Ø100 Inner taper of the main spindle metric 70 Drive power 25 kW 60%; 20 kW 100% ED Torque max. 1800 Nm / 1400 Nm 2 gear stages Speed range 3-2500 rpm Speed range gear step 1: 3-500 rpm Speed range gear step 2: 15-2500 rpm Tool: SAUTER 8-station turret: Ø40 Turret no.: 0.5.480.516-089768 ComNo. 06.09216 Tool holders DIN 69880 / Ø50 Lathe tool - cross-section according to DIN 770 h x w 32 x 25 Tailstock: Iiedpexftmrjfx Ag Nsh Quill diameter 100 mm Inner taper quill MK 5 Quill travel 190 mm Cooling: frequency controlled 1 bar/10 ltr - 4 bar/20 ltr; 2-stage programmable Dimensions: max. machine size (without chip conveyor) 4300 x 2131 x 1973 mm Space requirement (incl. chip conveyor) 6648 x 2735 x 1973 mm Accessories: 3-jaw chuck, diameter 250 mm chip conveyor, make KNOLL, built 2015 fixed steady rest moving steady rest various tool holders

Condition: good (used), Year of construction: 1998, Electric forklift, electric stacker, e-stacker, 3-wheel forklift -Manufacturer: Toyota, electric forklift 3-wheel forklift type FBESF 15 -Load capacity: 1350 kg -Lifting height: 3300 mm -Voltage: 24 volts -Tine length: 1090 mm, cross section 80 x 40 mm -Operating hours: 20293 h Iisdpfx Ageww Eq Nj Njh -Battery: ibv type 8 PzS 920 K 24 V built in Dimensions: 555/520/H690 mm / 162 kg -Dimensions forklift: 1780/1050/H1980 mm / with mast height 2120 mm -Weight: 2800 kg

Condition: used, Used machine Year of manufacture: to be confirmed Features and technical data: Drive: manual foot operation, no motor, no power connection required Double mitre: 45° Single mitre: up to 90° Cutting system: guillotine with twin blades, stepwise horizontal adjustment Maximum cutting width: 100 mm Maximum cutting height: 160 mm Maximum cross-section: 65 × 65 mm Longitudinal stop: up to 1,500 mm Equipment: adjustable stops, rebate supports, table extensions, waste chute, protective cover Dimensions: to follow Weight: approx. 95 kg Iijdpfx Agjxizufe Nsh All information is subject to change until the machine arrives in our warehouse. Availability: approx. end of October 2025 Location: Brandenburg

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 420 kg, total length: 28,650 mm, total width: 15,000 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! Iodpfxexf Arde Ag Neih About this model: Our Profiline is a semi-automatic stretch wrapper with up to 32 storable programs that guarantee absolutely consistent results. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. As part of the programs, you can also set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg (optionally up to 2000 kg possible). Our Profiline has a 1500 mm turntable and can wrap pallets up to a height of 2500 mm high as standard. Automatic recognition of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. If the wrapper wrapper is to be used at a different location in between, it can be easily moved by means of can be easily lifted and moved using a forklift truck. This model is our recommendation if you are looking for a professional & robust pallet wrapper for larger quantities, which can be optimally adapted to your needs. Would you like a larger plate, a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Isdpfxjxf Aqmj Ag Noih Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 500 kg, total length: 28,650 mm, total width: 16,500 mm, total height: 25,230 mm, input voltage: 230 V, warranty duration: 12 months, About this machine: This pallet wrapper is an absolutely new exhibit, which was only in our showroom for a few months. This machine comes with a 12-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! Iodpfx Asxf Aqgeg Nsih About this model: Our ProfilineLP is a semi-automatic stretch wrapper that guarantees absolutely consistent results thanks to up to 32 storable programs. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". As space-saving as a pallet wrapper with a horseshoe plate and as robust as a closed system system - these are the advantages of this machine in a nutshell! With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. The programs also allow you to set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 500 kg, this model is designed for loads of up to 1200 kg. Our Profiline LP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. This model is our recommendation if you have limited space but require a professional & robust pallet wrapper that can be optimally adapted to your needs. adaptable to your needs Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 420 kg, total length: 31,000 mm, total width: 16,800 mm, total height: 25,800 mm, input voltage: 230 V, warranty duration: 24 months, About this machine: This Profiline TP pallet wrapper is a new machine in stock. This machine comes with a 24-month guarantee. On request, we can also offer you a matching drive-on ramp, a photocell for black detection or the matching machine film! About this model: Our Profiline TP is a semi-automatic stretch wrapper with up to 32 storable programs that guarantee absolutely consistent results. programs guarantees absolutely consistent results and thus reliably excludes the "human factor". "human factor". With the electromagnetic brake, the tension of the film can be precisely adjusted in the individual individual steps (foot winding, winding up / head winding / winding down) in the programs. programs. As part of the programs, you can also set how fast the film carriage and turntable run. and turntable run. Head wrapping, foot wrapping and the overlap of the film at the end of the pallet can also be of the film at the end of the pallet can be saved for each program. In this way, you can store individual programs for each individual programs for each wrapping pattern to achieve ever more perfect wrapping results. results. The programs can be password-protected so that the user can only can only choose from the stored programs. With a weight of 420 kg, this model is designed for loads of up to 1200 kg. Our Profiline TP has a 1650 mm turntable and can wrap pallets up to 2500 mm high as standard. 2500 mm high as standard. Automatic detection of your pallets (via photocell) is a matter of course as well as adjustable head and foot wrapping. If the wrapper wrapper is to be used at a different location in between, it can be easily moved by means of can be easily lifted and moved with a forklift truck via integrated cut-outs. This model is our recommendation if you are looking for a professional & robust pallet wrapper for larger quantities that takes up as little space as possible. Would you like a higher mast, pre-stretching of the film or an automatic film section? Almost anything is possible with this machine! We would also be happy to configure this machine for you as a new machine with the options to suit your needs. About us: Business is done between people - we are convinced of that! Iedexf Aqaepfx Ag Njih A supplier delivers the goods you order - a partner can do more: he helps you find the best goods. He supports you in achieving your goals! They are also there to help you with problems and challenges! That is our conviction. For over 40 years and now in the 4th generation, we have been the partner of small and medium-sized businesses for all aspects of stretching and gluing. On request, we will also be happy to advise you on which pallet wrapper from our portfolio is the best solution for your requirements!