Used Sectioner for sale (2,364)

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Ffodjxxnlpjpfx Aa Eew Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads 

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, MAN fire engine with Bronto Skylift 32-meter telescopic platform aerial work platform, formerly used by a plant fire brigade. Very good used condition. Year of manufacture: 06/2000. Original price: 1,390,000 DM (650,000 €). MAN chassis with powerful 410 HP diesel engine / 11,967 cm³ displacement. Automatic transmission / mileage approx. 39,000 km. Bronto Skylift 32m telescopic boom with articulated section / front basket + option to use as a crane arm with up to 2 tonnes lifting capacity. Firefighting superstructure as shown in photos, equipped with Rosenbauer pump delivering 5,000 liters per minute. Technically in very good condition, test runs possible. Complete documentation available in several folders. Overall height ONLY 3,550 mm. Permissible total weight approx. 26,000 kg. Sale of the used vehicle as is, without warranty or guarantee, ex-stock Korschenbroich. Fjdpfx Aajx Ed Rzs Ejfw

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 1203697, Bros. punching press Make: Haulick & Roos Type: RVD 8/800 NS Press with adjacent console: Haulick & Ross RVD 80-800NS Eccentric press with double connecting rod with 4-fold bearing mounted eccentric shaft No: 1203697 YEAR OF MANUFACTURE: 1990 Press force: 800kN Speed: 30-300/min. Drive: 26kW Ram stroke: 4-60mm ram adjustment: 80mm Table: 800x640mm Fold-through hole: 780x60-160mm Table over floor: 1240mm Frame width: 780mm Lateral upright width: 350mm Installation height max. stroke bottom/ram top: 300mm Space required for press (LxWxH): 3200x1700x3000mm Control cabinet (LxWxH): 1800x400x 1900mm Weight: 12.000kg Reel: Eigl 2527-90 Driven: no Straightener with strap loop sensor: Eigl RST W37/300 (2528-90) Max. width: 300mm Fsdpfx Aaeudn Ute Eefw Max. Thickness: 3mm Number of rolls: 5 Feed rate: Haulick & Roos RS 260/120°/2727 Max. Feed length 260mm Max. Width 260mm Max. Max. thickness 3mm Feed speed 40m/min. Material cross-section up to 800mm?

Condition: used, machine/vehicle number: 13893, Year of construction: 2016, working width: 60,000 mm, total length: 2,000 mm, total width: 3,000 mm, total height: 3,500 mm, color: other, operating hours: 978 h, Type of fuel: Electric Empty weight: 2.600 kg Working width: 6000 mm Drive: Electric Number of rows: 8 Row spacing: 750 mm Folding: yes, hydraulic Steering: ISOBUS steering computer not included! Hours: 978 h Sown hectares: 1405 ha Equipped with: section sealing, fertilizer cutters, fold-out markers Overall dimensions: approx 2000x3000x3500 mm Net weight: 2600 kg Fedpfxeytgzgs Aa Esfw Condition: slight traces of use Online auction of various John Deere Massey Ferguson, Iseki, Shibaura, New Holland, Yanmar, Kubota, Deutz and Renault tractors, Grimme potato harvesters, JLG telehandler, Kuhn seeding and planting machines and other agricultural machinery. The online auction opens Monday 23 February and closes Wednesday 18 March. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Pickup days are on: - Wednesday 25 March - Tuesday 31 March Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Fsdpox E Ahzefx Aa Eefw Automatic clamp detection Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Condition: used, Used pallet racks from SSI Schäfer are among the most popular solutions for efficient and safe storage. This heavy-duty racking system is ideal for warehouses, industrial, and logistics operations requiring robust and durable racks for storing Euro pallets. The proven PR600 design provides high load capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used means certified brand quality at an especially attractive price – available immediately for new installations, conversions, or expansions of your existing racking system. Customizable: The rack frames (type P120) can be adjusted to your desired height – precisely and professionally in our workshop. We supply tailored racking solutions for any storage requirement. PRODUCT DETAILS - Height: approx. 985 cm - Depth: approx. 105 cm - Length: approx. 1410 cm - Shelf load: 3,000 / 3,500 kg (depending on configuration) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box section) - Beam color: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 75 incl. floor level - Version: Used SSI Schäfer PR600 - Availability: directly from stock, multiple units available SCOPE OF DELIVERY: - 06 × frames, approx. 9.85 × 1.05 m, galvanized, pre-assembled - 40 × beams, approx. 270 cm (INP100 or CE110) - 80 × safety pins Price: Fedpfjyta R Iex Aa Ejfw €1,800 net €2,142 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany by our partner freight forwarders – shipping costs depending on postal code - Professional assembly and disassembly by trained teams available on request - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racking systems from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to create a non-binding quotation tailored to your requirements. Whether new installation, conversion, or expansion – we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit us in our showroom! Here you can get a comprehensive overview of our pallet racks, storage racks, and other solutions. Many systems are assembled and can be experienced firsthand. Our specialist consultants are available for any questions or individual advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and variations of these products! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. Our phone number can be found on our company page. ☎️ You can reach us by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), Year of construction: 2006, Edgebander manufactured in 2006. This HOMAG Optimat KAL 330 features a flexible production layout for furniture parts, accommodating workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It includes a single-sided edge banding machine capable of processing various edge materials up to 20 mm thickness. If you are looking to get high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edgebander we have for sale. Contact us for further details. • Line workpiece capacity: • Length 250–3000 mm • Width 120–1200 mm • Thickness 8–60 mm • Edge bander (KAL 330) — base and transport • Continuous machine base; workpiece support with roller bar extendable ~800 mm • Transport chain 80 mm wide with rubber surface; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18–25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depending on workpiece length) • Workpiece overhang/supernatant 30 mm • Workpiece thickness 12–60 mm • Edge material from strip: 0.4–20 mm (max cross-section 900 mm²) • Edge material from coil: 0.3–3 mm (max cross-section: PVC 135 mm², veneer 100 mm²) • Max coil diameter 830 mm • Pneumatic connection 7–8 bar • Infeed system and controls (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic infeed (lengthwise and crosswise); for precisely sized, square parts • Stepless infeed guidance adjustment (axis), speed set at input terminal • Automatic side adjustment of units (workpiece overhang 30–80 mm) for gluing and post-processing • Input terminal; solvent applicator top/bottom • Edge preparation and gluing • Pre-milling unit: 2 motors, each 4 kW, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Pre-melting unit with granule storage • Quick-lock system for QA/QE application unit; QA front glue storage for color change • Basic gluing unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • Trimming unit HL84 with standing trimming stop for sensitive edges • Pneumatic trimming motor adjustment (2 positions: flush/level and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side trimming stop adjustment when edge thickness changes • Rough milling unit: 2 motors stacked, each 1.5 kW, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position setting: roughing with ~0.2 mm overhang / without overhang • Reserved free space for a fine milling unit • Contour milling unit Servo FK13 automatic: • 2 motors each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-fold tool changer • Feed speed max 20 m/min; minimum spacing between workpieces 500 mm • Workpiece thickness 12–60 mm • Automatic FK adjustment for identical radii on different edge thicknesses; auto retract • FK workpiece guidance with additional clamping for min part length 120 mm (single-sided) • Finishing and cleaning • Multi cleaning unit MN21 automatic: • Up to 3 profiles; tracing from top/bottom/side for chamfer and rounding on pre-milled PVC edges • Electropneumatic air nozzles; automatic chamfer/radius changeover; auto retract of upper/lower tool • Height adjustment via top pressure • PVC shavings separator top/bottom Ffsdpfjytf Irsx Aa Esw

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Ffjdpfx Aoyr Iwgja Ejw Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: used, total length: 1,700 mm, total width: 820 mm, total height: 1,570 mm, Empty weight: 580 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 4077950107003 - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 38 - Round bar cutting capacity [mm]: 32 - Shearing width [mm]: 300 Ffodpeymfbfsfx Aa Eew - Max. plate thickness shearing [mm]: 15 - Options: Length stop - Transport dimensions: 1700mm x 820mm x 1570mm (l x w x h) - Transport weight [kg]: 580kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 1,100 mm, total width: 1,670 mm, total height: 1,900 mm, Empty weight: 1.930 kg - Documentation available: No - CE certificate present: No - Serial number: 4422758897010 - Drive system: Conventional - Drive: Hydraulic Fedsymfa Uopfx Aa Ejfw - Punching force [ton]: 60 - Punch throat depth [mm]: 400 - Notching width [mm]: 70 - Max. plate thickness notching [mm]: 13 - Round bar cutting capacity [mm]: 40 - Shearing width [mm]: 400 - Max. plate thickness shearing [mm]: 20 - Options: Length stop - Transport dimensions: 1100mm x 1670mm x 1900mm (l x w x h) - Transport weight [kg]: 1930kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, power: 180 kW (244.73 HP), fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro3, loading space length: 80,000 mm, loading space width: 25,600 mm, loading space height: 36,000 mm, Year of construction: 2024, Equipment: crane, The Mercedes-Benz Atego 1725 A 4x4 flatbed truck with Hyva HB120 crane is a robust and versatile commercial vehicle, designed for use in demanding operational environments. This truck is ideal for applications in construction, mining, agriculture, or infrastructure projects where on-site loading and unloading are essential. KEY FEATURES: - ENGINE: Equipped with a powerful 6-cylinder engine delivering 245 HP (180 kW). The Atego 1725 A provides ample power for both heavy-duty transportation and crane operations on the job site. - DRIVELINE: Featuring selectable all-wheel drive, high ground clearance, and reinforced suspension, this truck is fully prepared for off-road use, even in the toughest conditions. - OFF-ROAD TIRES: Thanks to all-terrain tires and 4x4 drive, the Atego reliably reaches its destination, whether through mud, sand, or rough terrain. BODY: FLATBED WITH HYVA HB 120 CRANE Flatbed - Steel loading platform with anti-slip surface - Perimeter lashing points for secure load securing - High payload capacity, suitable for heavy equipment and bulk materials - 360° fold-down sidewalls for easy loading and unloading Hyva HB 120 Crane - Mounted behind the cab - Max. lifting capacity approx. 12,000 kg - Max. hydraulic outreach approx. 12 meters - Hydraulic extension sections - Outriggers for stable crane operation - Manual control panel The Mercedes-Benz Atego 1725 A 4x4 flatbed with crane is ideal for professionals in: - Construction & Infrastructure: On-site loading and unloading of building materials. - Mining: Supporting the transport and installation of components. - Agriculture: Suitable for moving machinery, livestock feed, and containers over muddy or uneven ground. - Public services & aid organizations: Rapid deployment for disaster relief and reconstruction projects. = Further Information = Ffodpfxjyn N Tbo Aa Esw General information Year of manufacture: 2024 Transmission Transmission: G 85-6/6.7-0.73, 6-speed manual gearbox Functional Mast: Telescopic Mast length: 1.213 m Lifting capacity: 12,000 kg Body make: Hyva HB120 Condition Overall condition: very good Technical condition: very good Visual condition: very good Damage: none

Year of construction: 1984, condition: excellent (used), functionality: fully functional, Iijima EFC-1600 automatic die-cutting machine with stripping section and front-edge trimming device for bundles, discharge onto conveyor belt. Installed in our workshop and powered on; can be tested. Overall condition is very good. From the second owner, who purchased the machine from DGT in 2001 and used it occasionally for major orders over more than 20 years. The company also had 4 large die-cutters and a Bobst 102. Maximum format 1200 x 1600 mm Corrugated cardboard thickness 2–11 mm Fodjv Nzpgjpfx Aa Eofw Maximum solid board thickness 3 mm Normal maximum die-cutting pressure 350 tons Die knife height 30.00 mm Machine's own weight 32,000 kg; this is 12,000 kg heavier than the Bobst 1575 EEG, of which this is the significantly reinforced "copy." The machine is too wide for container loading unless dismantled; however, it can be transported on a flatrack or in a conventional closed truck of standard width (< 250 cm wide).

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Hardened die-cutting plate and device plate. This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. Ffedpfx Aajv Nwwaj Eew For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg The die-cutting section is transported separately from the Spiess insert and must be assembled. The electrical switch cabinet is fully plugged in with the components.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Westeria Underfloor Chain Belt Conveyor Manufacturer: Westeria Year of manufacture: 2008 Motor: 5.5 kW Feed section length: approx. 7385 mm Incline section length: approx. 8400 mm Gooseneck: 1100 mm Usable width: 1200 mm Incline: 28° Ffjdoynhh Repfx Aa Ejw Note: The conveyor belt was dismantled from ongoing operation.

Condition: excellent (used), Year of construction: 2020, Macc Special 391 AV Fully Automatic Enclosed Double Column Horizontal Bandsaw Cutting Capacity: 300mm Round 300 x 320mm Section Blade Speeds 0 – 90m/min 2.2kW Spindle Motor Easy to use CNC Control Fully Automatic Coolant 415V Electrics Year 2020 Italian Built Machine Super Condition Ffedjyi H Rgspfx Aa Eew wwwjetmachinery.co.uk Jet Machinery Stock No: #79160 Machine Serial Number: 123084 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Mounting diameter: 38.00 Fjdeyn Sprepfx Aa Eofw Sectional width: 13.60

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min Ffjdpfx Asynbd Esa Eow rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Ffsdporz Tutofx Aa Eew Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: used, Year of construction: 1999, Item: A-9523-brixmaster Standardisation unit for juice etc. Type APV Brixmaster 3 x 6,000 L/h APV Brixmaster process control system, complete with stainless steel process skid and control cabinet. The system is designed for automatic Brix measurement, dosing, and blending, and has been used in the food and beverage industry (dairy, beverages, syrups, concentrates, etc.). The unit includes pumps, control valves, heat exchanger sections, and a complete APV electrical cabinet with HMI. Technical details: Manufacturer: APV Type: Brixmaster Year: 1999 Supply voltage: 400V / 50Hz Control voltage: 24V DC The system has been dismantled from production and stored indoors. Ffjdewbg Nnepfx Aa Eow Sale terms: Used equipment, sold as is, where is, without warranty. Please let us know if you need additional photos, dimensions, weight, or a quotation for transport.

Year of construction: 2015, condition: ready for operation (used), This TELSONIC TelsoSPlice TS3-6 P3.6 wire welding sytem was manufactured in 2015. It features a 15" SVGA touch screen, a pneumatic unit, and a 3.6kW WeldHead. The machine includes a barcode scanner, keyboard, and a spacious 2000 x 1000 mm table. Consider the opportunity to buy this TELSONIC TelsoSPlice TS3-6 P3.6 Table. Contact us for more information about this machine. • System: TelsoSplice Plus • Technology: Ultrasonic wire splicing / wire compaction • Application: Ultrasonic welding of wire strands for splice production and compaction • Material Capability: Bare copper wires • Restriction: Wires must not be tinned • Plastic Welding Capability: Not suitable for plastic welding • Total Welding Counter: 1490 welds • Recorded Welds / Compactions: approx. 490 • Ultrasonic Frequency: 20 kHz • Ultrasonic Power (Welding Tongs): 3 kW • Generator Power: 3.6 kW • Amplitude Accuracy: Stabilized ±3 % • Wire Cross Section Range: 0.26 mm² – 40 mm² • Cylinder Force at 6 bar: 1750 N • Cylinder Force at 7 bar: 2040 N • Insertion Stroke (Opening): 19 mm / 10.5 mm • Maximum Tool Torque: 20 Nm • Maximum Air Supply Pressure: 10 bar • Maximum Operating Pressure: 7 bar • Compressed Air Quality: ISO 8573-1:2010 [2:3:2] • Pneumatic Connection: Pneumatic hose Ø8 mm • Voltage Supply: 3 × 400 V / 230 V • Power Supply Type: 3LNPE • Frequency: 50 – 60 Hz • Nominal Current: 3.3 A • Maximum Peak Current: 6.0 A eff • Power Factor: cos φ > 0.95 • Minimum Line Protection: 3 × 13 A slow-blow • Protection Class: IP20 • Control System: SPC Module-4 • Operating System: Windows Embedded Standard 7 • Touch Panel PC: 15" SVGA Touchscreen • TelsoSplice Software Version: 3.5 • Version: 3.5.50929 • Microsoft Framework Version: 4.0.30319.34209 • Ultrasonic Generator: MAG • Generator Output Power: 3.6 kW • Weld Head: TS3-6 • Power Cable: 3 × 400 V / 230 V MAG/SPC-4 • Power Cable Length: 3 m • Pneumatic Unit: TelsoSplice TS • Adapter / Power Cable: MAG/SPC-4 • Rack Housing: 19" 8U • Emergency Stop: TelsoSplice Table E-Stop • Foot Switch: TelsoSplice Foot Switch • Barcode Scanner: Manhattan CCD Long-Range • Keyboard: US Layout • Key Set: TelsoSplice Key Set • Cable Set: TelsoSplice Table / Standing Version • Machine Table: TelsoSplice Table L • Table Size: 2000 × 1000 mm • Complete System Weight (Table Version): approx. 103 kg • Operating Temperature Range: 10 °C – 40 °C • Humidity Range: 20 % – 80 % (non-condensing) Fjdpfx Aajx D E A Ao Eefw

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Additional equipment • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Ffsdjyaimfjpfx Aa Esw Machine Depth 1800 mm

Condition: ready for operation (used), Year of construction: 2020, controller manufacturer: DELEM, controller model: DA-66T, number of axes: 4, overall weight: 23,500 kg, total height: 3,470 mm, This 4-axis Baykal APHS 31440 press brake was manufactured in 2020. It features a pressing force of 440 tons, a bending length of 3100 mm, and a stroke length of 330 mm. With a motor power of 35 kW and a machine weight of 23500 kg, it includes CNC crowning and a European clamping system. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31440 machine we have for sale. Contact us for more information. Additional equipment • Control Console: Double footswitch console Machine Benefits Technical Machine Benefits • Machine in excellent condition, with very low working hours – practically like new • Some tools are included in the offer • Stroke axes: Y1–Y2 cnc controlled • Backgauge x range: 1000 mm • Backgauge fingers: 2 pcs • Stroke length: 330 mm Extra Information Tools Upper Tool Weight: 700 kg Lower Tool Weight: 1200 kg Clamping System: Heavy duty top clamping system Tooling System: European clamping system with 85° sectioned punch and 4-V die Crowning: CNC crowning on bottom table Front Support Arms: 2 pcs on linear rail Safety: Electrically interlocked side guards, light barriers Dimensions Machine Depth 4100 mm Technical Specification Ffodjx D Nu Aopfx Aa Eew Bending Length 3100 mm

Condition: ready for operation (used), Year of construction: 2017, This ZINSER 2425-I/3600 plasma cutting machine was manufactured in 2017. It features a CNC-controlled system for both plasma and oxyfuel cutting, handling materials up to 35 mm thick and pipes from 100 to 620 mm. The machine offers a working area of 2000 x 8000 mm and includes advanced features like a 3D plasma cutting system, CNC path control, and an integrated network card for enhanced connectivity. For more information about this machine, please reach out to us. Additional equipment • Energy chain for plasma operation • Environmentally friendly extraction system with sectional distribution • Automatic gas console for monitoring and controlling gas flow and pressure Machine Benefits Fodpfx Aaox D R S Aj Esfw Technical Machine Benefits • High-quality ac servo motors for movement • Automatic initial height detection via nozzle contact • Optimal cutting quality with customized gas mixture • Excellent extraction quality with designed cross distributors • Plasma and oxyfuel cutting • Total table elements: 4 • Dimensions per table element: 2080 × 2100 × 950 mm • Continuous usable work surface: 2000 x 8000 mm (vertical cutting), 1500 x 8000 mm (angled cutting) • Movement feed: 10 to 15000 mm/min rapid traverse: 25000 mm/min • Double-sided, synchronized longitudinal drive via pinion and rack with brushless ac servo motors Extra Information Control Unit CNC path control with Windows 8.1 operating system 17" TFT color monitor - Touch Full HD IPC-based with AMD CPU 4x2.0 GHz SSD 64 GB, 4 GB RAM (upgradeable to 16 GB RAM) Ambient temperature +5°C to +45°C at max. 90% humidity, non-condensing 100-240 V AC input voltage Integrated network card Joystick for manual movement Remote maintenance service Cutting range: 0° to 50° vertical stroke Compressed air requirements: max. 7 bar, cleaning pressure 6-7 bar Sound level during filter cleaning: ≤ 75 dB(A)

Condition: ready for operation (used), Year of construction: 2013, This IMA NOVIMAT I /G80/390/R3 edgebander was manufactured in 2013. It features dual 4.5 kW motors at 150 Hz, achieving speeds up to 9000 rpm. Capable of handling edge heights from 14 to 65 mm and roll diameters up to 850 mm, it's ideal for precise edgebanding needs. Consider the opportunity to buy this IMA NOVIMAT I /G80/390/R3 edgebander. Contact us for more information about this machine. Additional information Fjdpfx Aaox D Nh Aj Esfw • Motor Power: 2 x 45 kW, 150 Hz • Motor Speed: 9000 rpm • Power Supply: 230 V • Heating Power: 6 x 500 watts • Adjustment Range: Vertical approx. 17 mm, Horizontal approx. 30 mm • Stroke: Max. 8 mm • Roll Diameter: Max. 850 mm • Edge Height: 14 – 65 mm • Workpiece Projection: Min. 30 mm + edge thickness, Max. 80 mm including edge thickness • Workpiece Length: Min. 130 mm • Workpiece Gap: Min. 300 mm • Workpiece Distance: Min. 990 mm • Workpiece Thickness: Min. 8 mm, Min. 12 mm with tracing wheel, Max. 80 mm • Single Tracing Workpiece Projection: Min. 30 mm • Double Tracing Workpiece Projection: Min. 38 mm for max. 4 profiles, Max. 50 mm • Cutter Head Diameter: 125 mm • Motor Shaft: 30 x 68 mm diameter • Internal Thread: M16, Depending on motor, left or right • Cutting Cross-section Motor Power: 0.20 kW, 200 Hz 400 V, 12000 rpm for max. 195 mm², Option: 0.66 kW, Extension to max. 1100 mm² • Tool Diameter: 160 mm / 48 teeth • Swivel Range: 0 and 25 degrees • Workpiece Speed: Max. 30 m/min for an edge cross-section of 3 x 45 mm • Edge Overhang: Top edge, max. 3 mm, Bottom edge, max. 2 mm for straight edges • Edge Material: Edge, max. 4 mm for wood and plastic; Aluminum, max. 3 mm

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm • Spindle head according to din 55027: size 8 Fsdpfsx D Ibbsx Aa Ejfw Extra Information Machine still under power/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Moving steady rest clamping range: 12- mm/ The machine has been working effectively in 1-shift operation since it was purchased/ The chuck incl. hard & several sets of soft jaws and the tailstock can be supplied as accessories/ Any associated tools could be discussed in the event of an order/ The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation/ All manuals are available. Dimensions Machine Depth 3250 mm