Used Seedbed Combination for sale (3,487)

Condition: used, Nikmann FS 41N planer and thicknesser Godpfxsya Drvj Aadetu - Planing width: 41 cm - Shaft with 4 knives - 2 table rollers - Motor with brake Machine in very good, excellent condition.

Condition: good (used), Year of construction: 1995, functionality: fully functional, WORKING DIMENSIONS: 400x250 mm Gsdpfxjx S E Hao Aadjtu 4 SIDES + EDGE BEVELERS

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Gtodpfxextgz Ee Aadou Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Godpfx Aaewfdbpodetu Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: good (used), Lot combined duoburners, gas and oil operated Fabr.: Steinmüller, Type 1: G-18-K 1120/800, Type 2: DAG-18-K 1120/800, Year of manufacture: 1996, burner data natural gas burner: heat output GT operation 43.6 MW, calorific value 40.09 MJ/kg, fuel mass flow 1.089 kg/s, control range 1:8, pmax.: approx. 1.500 Pa, exhaust gas temperature 424 degrees, (8 pieces), burner data for dual oil burners: calorific value 42MJ/kg, fuel oil throughput 4,600 kg/h, max. pressure before burner 13 bar, burner operating range 1:5, max. oil pressure at takeover 18 bar, temperature before burner 240 degrees, (8 pieces), Remark: Burner must be dismantled by customer. The burners can also be purchased separately. Gtjdpfsd S R Injx Aadeu

Condition: good (used), Year of construction: 2010, functioning wood gasification plant with 40 kw electric power and 80 kw heat output Gtjdpfx Asiggpboadou

Condition: good (used), Year of construction: 1995, functionality: fully functional, For sale: HUNDEGGER HM-3 planer. Suitable for machining beams from 15*30 mm up to 300*400 mm. Cutting depth: 10-12 mm. Compatible with HUNDEGGER CNC machines (p10, Speed-Cut). Well-maintained, kept in a workshop. For sale due to underutilization. We can assist with transportation. Please contact us with any questions. Gjdpfex Tu Dqsx Aadjtu

Condition: like new (used), functionality: fully functional, Year of construction: 2022, For sale: Ex Demo Digga RC Rock Combination Earth Auger, 750 mm diameter The auger includes a 1.4-meter extension. The unit was only used once for a demonstration and is as good as new. RC6 Digga augers are available with a range of different tooth options to suit most ground conditions, including earth, hard soil, shale, clay, and permafrost. In short, with the RC6, you get all the advantages of the A6 plus the superior penetration of the B7 tapered tooth head. The RC6 comes complete with general-purpose tapered teeth, ideal for combined drilling in all conditions—from soil to medium rock—delivering a clean, workable hole every time. Tooth replacement Gtedsw R Ux Uopfx Aadou RC6 teeth are easy to install and remove thanks to Digga’s innovative knock-in, knock-out tooth locking system, eliminating the need for extra tools to change the teeth. The standard auger length is 1500 mm with a 75×75 mm square connection. New price €2,523.00 Now €1,100.00

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 80×25, volume flow: 504 m³/h, Used Ebara 80 x 25 Booster Vacuum Pump Combination – Dry Multistage Vacuum Pump – Semiconductor Vacuum Pump Manufacturer: Ebara Model: Ebara 80×25 Serial no.: Ebara DPD 966504 Pumping speed: USA 60 Hz, 8,400 L/min Dimensions: 60 x 90 x 110 cm Gtjdpfx Aoxiv Sxjadou Motor: 3 PH, Induction motor 2.2 kW, 208 Volt, 60 Hz. Sold individually.

Year of construction: 1991, condition: used, round bar steel 45 mm square edge steel 42 mm L-beam 140 x 13 mm flat steel 350 x 20 mm pressure 550 kN throat 305 mm Gtodpfx Asd Ih Steadsu notching: rectangle tool mm total power requirement 5,5 kW weight of the machine ca. 1260 kg dimensions of the machine ca. 1360 x 750 x 1565 mm 2 working cylinder with 2 separated electric foot switch for 2-people-handling New notching table, new knife for the rectangle notcher and new punching table included For further information please see brochure.

Condition: new, Year of construction: 2024, Combined Exposure Unit, Model 4, 120x145, 3.5kW Max. screen size: 120x145cm, floor space: approx. 250x 190cm, MH quick-start lamp: 3.5kW, connection: 400V/50cycles, CEE-plug, 32ampere. Gtsdpfxjh Tym Is Aadsu consisting of steel-tube support with storage board, with 4retractable drawers, with pull-out rails for various sizes of screens, vacuum copying frame with flexible rubber blanket on top, easier lifting of the glass upper frame by gas springs, height-adjustable cross-beam on top with hanging MH exposure lamp model AKTICOP S as well as UV-protection curtain, with light dosing device model AKTITRON S16E, 16programs, equipped with light sensor at the copying frame. Control board at the drying cabinet with vacuum gauge, vacuum reducing valve, operating and control elements.

Condition: good (used), Mubea Muhr und Bender section shear combined Type: KBL 16 Dimensions: 200x75x197 cm LxWxH Gjdjncc Huspfx Aadjtu

Condition: new, Year of construction: 2023, New machine Godpfew I U Nusx Aadstu Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Condition: new, Year of construction: 2021, New machine Year of manufacture: 2021 Dimensions and weights Length: approx. 1725 mm Width/depth: approx. 880 mm Weight: approx. 270 kg Surface planer Maximum cutting depth: 4 mm Extraction connection Thicknessing hood extraction port diameter: 2 x 120 mm Thickness planer Minimum working height: 3 mm Maximum working height: 230 mm Maximum cutting depth: 4 mm Electrical data Drive motor power: 4 kW Connection voltage: 400 V Mains frequency: 50 Hz Cutterhead Type: TERSA Gsdow I Ul Nspfx Aadjtu Number of planer knives: 3 pcs Speed: 5200 rpm Maximum planing width: 300 mm Feed Feed speed: 7 m/min Availability: short-term Storage location: Hochheim

Condition: good (used), Year of construction: 2014, operating hours: 42,000 h, functionality: fully functional, 1 combined heat and power unit for natural gas (convertible to other gas types) Output: 800 KW electrical 800 KW thermal Manufacturer: G2 Engine: MWM, type TCG2016 V16C Operating hours: 42 000 Year of construction: 2014 Complete system in container (12 x 4.5 m) with all heat exchangers, switch cabinets, power supply All maintenance intervals carried out by the manufacturer. Gsdpfx Ajvgbdroadjtu Ready for immediate use! Further details on request

Condition: used, Year of construction: 2003, round bar steel 30 mm square edge steel 25 mm L-beam 80 x 80 x 8 mm 200 x 13 / 350 x 6 mm 40 t throat 175 mm work stroke 32 mm work height max. 980 mm hole diameter in sheet thickness 20 x 15 / 38 x 8 mm total power requirement 3,0 kW weight of the machine ca. 0,62 t Dimensions (LxWxH) 1,0 x 0,8 x 1,3 0 Profile steel scissors with - 1 foot trigger - Support tables - Rectangular notcher Gsdpfx Aaer Erwlsdetu - Hole punch including tools

Condition: used, Year of construction: 2003, round bar steel 32 mm square edge steel 30 mm L-beam 80 x 80 x 8 mm 80 x 13 mm 36 t throat 170 mm work stroke 28 mm work height max. 980 mm material thickness 28 x 13 mm Gjdpfx Aasrc In Ajdstu hole diameter in sheet thickness 25x10 / 30x8 mm total power requirement kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 1,9 m Profile steel scissors with - 4 workstations - 1 foot trigger - hydr. drive - Support tables - Rectangular notcher - Hole punch including tools

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm Gsdpfx Asvkix Eeadotu hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 28 x 10 mm hole punching press: capacity (dia. x thick.) 23 x 12 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m

Condition: used, round bar steel 42 mm square edge steel 38 mm L-beam 110 x 10 mm cutting capacity 150 x 16 mm pressure 60 t hole punching press: throat 370 mm hole punching press: capacity (dia. x thick.) 25 x 16 / 20 x 19 mm 720 x 420 mm weight of the machine ca. 2,1 t Gtodpfxewth N Hj Aadsu dimensions of the machine ca. 1,8 x 1,6 x 1,85 m Profilstahlschere - inkl. Fußschalter

Condition: used, round bar steel 25 mm square edge steel 22 mm L-beam 70 x 7 mm Gtsdpfxshwaufs Aadou cutting capacity 100 x 10 mm plate thickness 10 mm total power requirement 1,3 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,1 x 0,65 x 1,5 m

Condition: used, round bar steel 30 mm Gtsdjvu Hb Sspfx Aadou square edge steel 28 mm L-beam 90 x 8 mm 150 x 8 mm pressure 35 t total power requirement 2,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,75 x 1,0 x 1,5 m Profile steel shears combined with: - Foot switch - Length cut

Year of construction: 2020, condition: as good as new (ex-display), High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug with base frame, integrated suction and brake Also other models available from stock! Inquire about the current stock. Gjdpfx Aoiiywzeadstu

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, Equipment: compressor, Pallet feeder 6 buckles 2 knives Gedpfxjw D Ur Ao Aadstu 1 side buckle SBP 66 press delivery Compressor Glue unit

Condition: excellent (used), Year of construction: 2020, For sale is a used Hammer C3-31 4-function combination machine with a cutting length of 1300mm. The machine is in very good condition and has been serviced and inspected by our specialist staff. Technical data: - Cutting length: 1300mm - Cutting width: 650mm - Cutting height: 103mm - 4 milling speeds - Directional switch - Silentpower spiral cutter block - Planing length: 1400mm - 3 motors, each 3kW - Year of manufacture: 2020 The machine is located in A-5431 Kuchl and can be inspected by appointment during our business hours. Subject to prior sale! Related terms: combination machine, combined machine, planer, thicknesser, thicknessing machine, circular saw Gedpfx Aaoxxi Dtsdotu Reference: R-L0B8S

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, TERSA cutterhead with 4 knives, 5.5 kW motor, 400 V, 50 Hz, electronic start and brake unit. Thickness table adjustment with buttons for rapid or slow feed, as well as fine adjustment accurate to 1/10 mm. Integrated operating hours counter. Thickness table mounted on 4 support spindles and 4-way guided. Two feed speeds: 7 and 14 m/min. One rubber feed-in and one rubber feed-out roller. Two extraction ports Ø 160 mm. Slide for top extraction. Planer guard system SUVAMATIC. Motor power 7.5 kW. Positioning control including sensor monitoring. Gsdpfx Ajx Ey Tzoadetu