Used Seedbed Combination for sale (3,486)

Condition: used, Year of construction: 2025, working width: 7,500 mm, DALBO Rollomaximum 750 Gtodpfxewdkwno Aadsu Seedbed Combine Demo Machine 2025 Technical Specifications and Equipment: 7.50 m working width 3.00 m transport width Empty weight 7,750 kg Tires 520/50-17 Air brake Lower linkage 6 working zones consisting of: Cracker board Cast iron roller segment 4-row harrow segment Leveling bar Steel cross-kill rings | Internal No.: 11308094

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 Gtodpfx Aaou Icghodju angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Gsdpfx Aaeu Ickyjdjtu Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: good (used), functionality: fully functional, Motor power 4 kW, direct start with brake and limit switch Planing/joining width 410 mm Gjdoyivi Eopfx Aadetu Total planer table length 2000 mm Feed planer table length 980 mm Chip removal max. 4 mm - set and displayed on the right planer table Swiveling jointer fence with anodized ruler Planer shaft with 4-knife cutterblock system Planing thickness 404 mm with automatic E-thickness Powerdrive height adjustment (min. - max. 3 mm - 230 mm) Digital display for thickness height in mm Euro comfort safety guard Operating hours counter 2-stage synchronous feed 6 + 12 m/min Extraction port diameter of jointer/thickness unit 120 mm

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm - Planing length: 1400 mm - Max. workpiece height: 230 mm Gedex U U Ekjpfx Aadetu - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: new, Explorer the complete LUREM program od woodworking machines at Thrane Maskiner. We ship alle over EU. Competitive prices. · 2, 4 or 5 functional machines. · Tabsesaws in many sizes. · Bandsaws · Dust extractors. For example: LUREM C300/5 with 4 functions. VALUE FOR MONEY! 1). Table saw. 2). Spindle moulder. 3). Planer 4): Thicknesser. Gsdpfx Aajx S In Tsdstu Please contact us for offer.

Condition: new, Grinding stone D x W ----- 200 x 32 mm Shaft diameter ----- 32 mm Grinding stone ----- Grit 36 Gjdpfsga Tw Hox Aadstu Wire brush D x W ----- 200 x 20 mm Speed ----- 2850 rpm Motor ----- 900W - 230V - 1 Phase Motor ----- 900W - 400V - 3 Phase Weight ----- 26 kg OPTIONS * Base cabinet Price: € 99,00 ex vat

Condition: new, functionality: fully functional, power: 34.57 kW (47.00 HP), gearing type: automatic, fuel type: diesel, color: original, overall weight: 3,400 kg, maximum load weight: 1,000 kg, lifting power: 1,000 kg/m, tire condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, shovel volume: 1 m³, digging bucket width: 360 mm, brakes: other, suspension: other, Year of construction: 2025, Equipment: additional headlights, adjustable chassis, all wheel drive, cabin, crane, cruise control, gripper hydraulics, hammer hydraulics, hydraulics, low noise, onboard computer, pallet forks, rear pickup, standard shovel, NEW YANMAR COMBI EXCAVATOR!! NEW!! NEU!! NEW!! 1-YEAR WARRANTY PRICE: 29,500 EUR NET + VAT IN CROATIA. OUTSIDE CROATIA, VAT IS NOT CHARGED! Original Yanmar engine, 47 HP 1-year warranty Operating weight: 3,400 kg Width: 1.79 m Length: 6.00 m Height: 2.60 m Rear hydraulic digging arm reach: 3.90 m Digging bucket: 36 cm Various bucket sizes, hammer, etc. available. Front loading bucket with quick coupler, capacity: 1.00 m² can be purchased. Pallet forks with quick coupler available! RESPONDING ONLY TO WRITTEN REQUESTS: PLEASE ONLY SERIOUS INQUIRIES. TRADES AND RECIPROCALS ARE NOT CONSIDERED. Gtjdpfx Ajw Tkmyeadeu FINANCING OR LEASING OFFERS AVAILABLE. Larger Kubota also available for €21,500.

Condition: excellent (used), CATALOG NUMBER: 7081 TECHNICAL SPECIFICATIONS - JOINTER: - Shaft width: 260 mm - Table length: 1190 mm - Cast iron fence, angle adjustable - Adjustable tables - THICKNESSER: - Max workpiece thickness: 110 mm - Thicknesser shaft guard - From above: - Anti-kickback fingers Godsx Swwdopfx Aadjtu - Toothed feed roller - Planing shaft - Smooth outfeed roller - Extraction port diameter: 85 mm - CIRCULAR SAW: - Max blade diameter: 160 mm - Cutting height: 25 mm - Blade bore diameter: 30 mm - Blade height adjustable (up/down) - Blade guard - Cutting width with fence: 160 mm - Table dimensions: 710 x 420 mm - SPINDLE MOULDER: - Spindle diameter: 30 mm - Spindle height adjustable (up/down) - Spindle height: 110 mm - Max tool diameter: 190 mm - Fence - Motor approx. 2.2 kW - Dimensions (L/W/H): 1200 x 900 x 800 mm - Weight: 325 kg ADVANTAGES - Compact, takes up little space - Very good condition - Used multifunctional machine Net price: 7,900 PLN Net price: 1,880 EUR (based on 4.2 EUR/PLN exchange rate) (Prices are subject to change due to currency fluctuations)

Condition: as good as new (ex-display), SHOWROOM MACHINE Gsdpouv Exijfx Aadotu For sale is an as-new Record Power PT 107 planer-thicknesser with a planing width of 265 mm. The machine is in original condition, so you receive the full warranty. Technical specifications: - Planing width: 265 mm - Planing table length: 1,110 mm - Max. planing depth: 3 mm - Tiltable fence up to 45° - Cutterblock diameter: 75 mm - Large 3-knife cutterblock - Speed: 4,000 rpm - Max. thicknessing height: 190 mm - Thicknessing infeed width: 265 mm - Feed speed, thicknesser: 5 m/min - Max. depth of cut, thicknesser: 2 mm - Motor: 2.3 HP / 230 V - Power consumption: 2,200 watts - Extraction port: 100 mm - Weight: 162 kg One unit of this planer is available at both A-5431 Kuchl and A-8561 Söding, and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70 incl. VAT Germany: €90 incl. VAT South Tyrol: €130 incl. VAT Related terms: planer, thicknesser, planer-thicknesser, surfacer, thickness planing Reference: ZXPT107-A

Condition: excellent (used), For sale is a used Hammer A3-41 Silent Power surface planer and thicknesser with a jointer length of 1800 mm. The machine has been checked by our specialized staff and is in very good condition. Technical data: - Silentpower spiral cutterhead - Planing width 410 mm Gtsdswqq Dhepfx Aadou - Jointer length 1800 mm - Max. clearance 230 mm - Motor power 4 kW / 5.4 HP - Suction connection Ø 120 mm - Year of manufacture 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer, jointing, thickness Reference: R-A0117

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-41 planer-thicknesser with a planing length of 1800 mm. The machine has been checked by our specialist staff and is in mint condition. Technical data: - 3 system knife planer shaft - Planing width 410 mm - Planing length 1800 mm - Max. passage 230 mm Gjdpfov Dah Dsx Aadstu - Motor power 4 kW / 5.4 HP - Extractable Ø 120 mm - Year of manufacture 2023 - Mint condition The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-1

Condition: new, A complete working station for the production of timber frame walls including the following functions 1. Framing of the wall 2. Application of cladding 3. Nailing or stapling of cladding 4. Drilling and Routing of openings and overhangs 5. Application of breather paper Gedpjb Tmrvefx Aadjtu 6. Nailing of battens 7. Gluing of sheeting material to frames Specification Full PC control with 2 off 19” touch screens Interactive display of framing for panel assembly Automatic download from drawing software Heavy duty tables with one fixed side and one moving side 90 degree squaring corner blocks with pneumatic retraction to enable panel to move to next position when finished 1500mm minimum panel height Maximum panel height 6m Maximum panel length 20m 825mm working height 500mm maximum frame height Motorised table opening with automatic brake locking Independent retractable clamping system, for the complete access of nail guns along top and bottom rails, to enable square and accurate clamping of the panel Framing tools driven to the required position via a servo drive motor, with heights controlled by software Bridge mounted with nailing / stapling tool as standard. Options for other tools to be mounted Full integration with major software packages including Sema, Dietrich;s, HsbSoft, CADWORKS, Gang Nail, DDS, Mitek.& Inventor Batten application system with guide to ensure they battens are kept straight before nailing including batten storage area Selection of multiple nail positions in both automatic and manual modes Pneumatic lifting rollers to assist the manually transporting of the finished panel to next position. Optional stud/sheeting carriage enabling studs to remain adjacent to the operator whilst assembling the frame.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 Gjdpfjxd Thmox Aadjtu 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Model - LCWS. ✅ Serial - SO-22949/1/19. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Condition: good (used), Year of construction: 1999, Lg 33922 Unwind-straightener combination SOPREM BRH 7-200-80U-1250 BAP strip width max. 200 mm Coil weight max. 1,250 kg Spreading range approx. 380 to 430 mm Gtedpfx Aashuwacsdsu Coil outer diameter max. 1,300 mm Strip thickness approx. 0.8 to 3 mm Working direction from right to left

Condition: new, Multipurpose combination machine with aluminum sliding table for sawing, milling, surface and thickness planing, and optional long-hole boring Torsion-resistant steel and cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodized aluminum sliding table, 10-year SCM warranty on slideway wear Large crosscut frame with extendable aluminum telescopic fence and flip stops Combination saw and mitre fence with 45° quick adjustment Max. saw blade diameter 315 mm with optional scoring unit, tiltable from 90° to 45° Helical steel feed roller for consistent timber feed during thickness planing Four spindle speeds, manually selectable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Fitted with the proven million-fold SCM ball contact system Consistently smooth operation due to hardened and ground guides Not susceptible to dust and dirt thanks to minimal contact point between ball and trapezoidal rail The extraction ports for surface and thickness planing are located on the same (right) side, so the same extraction hose can be used for both planing operations. Helical steel infeed rollers for constant and even workpiece feed Massive anti-kickback pawls for operator safety 3-knife cutterblock ensures optimum planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of blade: 1660 mm Cutting width at rip fence: 800 mm Saw shaft speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutterblock diameter / number of knives: 72 mm / 3 pcs Table dimension: 300 x 450 mm Min. / Max. working height: 3 mm / 220 mm Max. stock removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. retractable tool diameter: 180 mm Spindle speed: 3500/6000/8000 rpm Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Saw blade guard extraction port Ø: 60 mm Weight: 430 kg OPTIONS: - Professional fences EUR 300.-- Saw fence with quick lock and micrometric adjustment Surface planer fence 90° ÷ 45° continuously adjustable - Scoring unit incl. blade EUR 292.-- - Handwheel with digital readout for thickness table positioning EUR 129.-- - Mobility kit EUR 119.-- - 2 additional handwheels for unit adjustment EUR 45.-- - TERSA cutterblock, diameter 72 mm EUR 212.-- Gtjdpfx Aoiiyppoadou - Xylent spiral cutterblock with 3 rows of knives EUR 717.-- - Aluminum long-hole boring device EUR 390.-- - 2 flip stops for crosscut fence EUR 150.--

Condition: new, Year of construction: 2026, Wetpaint Spray-/ Dryingcabine Internal dim. L8000 x B4000 x H3000mm 30.000m³/h Inletair/ 30.000m³/h evaporation Internal Temp. 20°C man. adjustable, Drying Temp. up to 70°C Indirect Gasburner approx 300KW (-10°C - +20°C) Software in delivered switch box Inlet air ceiling with filter G4/EU4 und NF600PA, Outside air bollom using grids and PS50 glas fiber Light (4x18W) wall integrated LED, 750LUX Grid point weight max750kg Gtedpjhzbq Tefx Aadou

Condition: used, round bar steel 33 mm square edge steel 30 mm L-beam 60 x 8 mm hole diameter in sheet thickness 20 in 13 mm Gtsdpfex Hp Ahjx Aadsu hole punhing press: pressure 35 t hole punching press: throat 320 mm hole punching press: max. length of stroke 24 mm hole punching press: capacity (dia. x thick.) 30 x 9 mm hole punching press: capacity (dia. x thick.) 20 x 13 mm total power requirement 1,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 1,5 x 0,7 x 1,8 m Profile steel shear with: - Hole punch - Notcher - Foot switch - Machine light - Mounted on a trolley

Year of construction: 2016, condition: not inspected (used), Current hours on tube 3560 (20.000 total lifetime of the tube) Gjdpfxsu E Icve Aadotu PCB width max.: 450 mm x 400 mm Inline X ray + AOI Working condition to our best knowledge. Please note that machine will be sold without warranty and in as-is condition. We always recommend our customer to do a full OEM service prior to installation of the units to production to ensure the maximum efficiency of the machines!

Condition: good (used), I have a complete Corali line for the production of wooden boxes for sale. The line's capacity is about 800-900 pcs/h. The line consists of the following machine - 1 x M125 Gsdpfovpvytjx Aadjtu - 2 x M127 - 1x M-65 Lots of spare parts. Maszyny sprawne, używane w stanie dobrym. Faktura VAT Zapraszam do kontaktu

Condition: used, Year of construction: 2022, operating hours: 919 h, Claas Lexion 6800 TT Year of manufacture: 2022 Engine hours: 918 Drum hours: 635 Hectares: 2,474 Current equipment: - LASER PILOT steering system, left - Header drive M, constant - Header feed roller with 2-way system, M - HP channel – AUTO CONTOUR, chain, open return pulley - Automatic hitch - Dust extraction for E/V/HP channel - Hydraulic top link for HP channel - Header brake - APS threshing system – grain/maize (10/18/18) - Threshing drum drive – 330-930 rpm - Threshing concave segment - Center guide for straw walkers, mounted - JET STREAM cleaning, incl. 3D and grass wind reduction - Returns volume measurement with CEBIS display - Upper and lower sieves, TM6 - Grain tank 12,500 liters - Grain tank preparation with unloading aid for grass - Grain tank discharge auger L, Ø 330 mm - Grain tank unloading rate 110 l/s - Grain tank unloading drive 80 l/s – 130 l/s - Fixed spout – grain tank discharge auger L, Ø 330 mm - Radial spreader – SPECIAL CUT - Swath former – radial spreader - Straw chopper drive for radial spreader – premium - Drive axle XL – TERRA TRAC - Support wheels for track system - Recovery lugs for TERRA TRAC front axle - TERRA TRAC track width 635 mm Godpfsxq Sfkex Aadstu - Access ladder with anti-collision protection – TERRA TRAC - Steering axle M, adjustable - Steering axle tires 500/85 R24 x 275 IMP, 8-hole - Travel speed 30 km/h - Without railings - Mercedes-Benz OM470 LA – 340 kW/462 HP (Stage V), air-cooling - Fuel tank 950 liters - Engine PTO pump - A/C-MATIC – automatic climate control with heater - Radio with MP3 function - Roller blinds for side windows - CEBIS terminal with armrest, standard - Camera system, pre-installed - Camera – rear, display in terminal - Camera – hitch, display in terminal - LAAS Remote Service incl. five-year license - TELEMATICS advanced license – 1 year - Comfort seat, air-suspended - LED work lighting – Plus - Large toolbox incl. instructor’s seat - CEMOS AUTOMATIC – AUTO SLOPE - CMOTION multi-function lever - Automatic module - Add-on module 1 - Add-on module 2 - Slope sensor - Steering angle sensor - CLAAS communication module (LTE) - Central locking system, standard - LED tail lights, extendable - CAN Ethernet Gateway (CEG) - FIELD SCANNER/LASER PILOT/AUTO PILOT ready - Automatic discharge direction adjustment - Straw chopper – counterblade/grate adjustment, hydraulic - Rear-view mirrors, electrically adjustable - Automatic chain lubrication for grain tank unloading Incl. Vario 930 header Incl. transport trailer | Internal no.: 11064749

Condition: used, Year of construction: 2011, operating hours: 1,300 h, power: 177 kW (240.65 HP), Equipment: air conditioning, cabin, crop cutter, onboard computer, rape cutter, Hectare counter | Oilseed rape side knife left: hydraulic | Oilseed rape side knife left: hydrostatic | Oilseed rape side knife right: hydraulic | Oilseed rape side knife right: hydrostatic | Fendt 5250 L Year of manufacture: 2011 Approx. 1,300 engine hours Gtsdpfxjx R N Ryo Aadou Approx. 2,400 hectares Display was recently replaced, therefore only a few hectares are shown on the meter 260 hp Iveco engine Straw chopper Loss monitoring Biso Crop Ranger 5.50 m header Hydraulic side knife for rape | Internal no.: 10519550

Condition: excellent (used), Year of construction: 2022, For sale is a used Hammer A3-31 planer-thicknesser with a planing width of 310 mm. The machine is in very good condition and has been reconditioned and checked by our specialist staff. (Fully functional) Technical data: Godsv Ianxspfx Aadotu - Planer-thickness width 310 mm - 3 knife shafts (reversible knives) - Thickness height 4-225 mm - Dual foldable planer tables - Pivoting planer stop - 2.9 kW / 4 HP motor / 400 volts - Year of manufacture 2022 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-AT0YY

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1150x980 mm Weight 900 kg Total power requirement 7,5 kw Gtsdpfsv A Hhujx Aadju

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2600x3010x1250 mm Weight 500 kg Gtjdpfovz Hlwjx Aadeu Total power requirement 3,8 kw