Used Semi Automatic Bandsaw for sale (28,855)

Condition: new, Cutting range at 90 degrees: round 220 mm Cutting range at 90 degrees: square 210x210 mm Cutting range at 90 degrees: flat 230x185 mm Cutting range at 45 degrees left: around 150 mm Cutting range at 45 degrees left: square 150x150 mm Cutting area at 45 degrees left: flat 150x210 mm Gsdpfxshcw S Sj Abdsbg Cutting range at 60 degrees left: around 90 mm Cutting area at 60 degrees left: square 90x90 mm Cutting range at 60 degrees left: flat 90x100 mm Saw blade dimensions 2450x27x0,9 mm cutting speed 35/70 m/min working height 915 mm vice opening 265 mm total power requirement 1,2 kW Machine weight approx. 240 kg Space requirement approx. 1550x870x1740 mm The Zimmer Z241/R is a self lowering saw for mitre cuts from 0° - 60° left. After the cut the machine stops by a safety limit switch. The lowering is infinitely variable via a hydraulic system. The manual lifting of the saw arm after the cut can be done at any position. The saw arm remains in the desired position. Standard equipment: - with ICS lowering - Saw arm can be swivelled up to 60° to the right - Quick-action vice - Band guide made of carbide - hydraulic saw blade tensioning, tensioning pressure indicator, blade breakage switch-off - incl. coolant device - incl. machine base cabinet - hydraulic cylinder - emulsion pump - eccentric clamp - saw band - 400 V plug 16 A

Year of construction: 1986, condition: used, machine/vehicle number: 80.000.-978, Version A, size 1 Test force: 750 kN Type of force effect: spring load kN pre-force: max.300 kN Gbsdpel Axc Ujfx Abdjg Projection: 200 mm Test height: 14 mm Voltage: 380/220 V Type of current: 50 Hz Accessories and special equipment: - Brinell-Vickers hardness measuring electronics type 2.802.007 - Glare shield for ground-glass device Space requirement: 360 x 840 x 1250 mm Weight approx. 620 kg

Condition: good (used), Make: HESKA Model: HES 260AL Year of manufacture: 1998 Machine number: 19267 Saw blade: 3,660 x 0.9 x 25 mm Cutting diameter at 90°: - round: 260 mm - flat: 325 x 260 mm - square: 260 x 260 mm Gbjdpfxow Nyh Ee Abdeg Vice opening: 310 mm Band speed: 17 to 106 m/min Max. automatic feed: 500 mm Accessories: Support 1,500 mm Drive power: 1.1 kW Weight: 700 kg Machine dimensions: 2,000 x 1,000 x 1,800 mm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) Gbedexdr Rtjpfx Abdeg - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: new, The machine individual 520.360 DGH is a semi-automatic double mitre band saw in two-column design. The mitre range of the saw extends from 30° left continuously to 30° right. The model individual 520.360 DGH has a hydraulic full stroke vice and an easy to use control in plain text display. Standard equipment details Godpfx Aodyn H Tjbdsbg - Double mitre 30° - 45° - 90° - 45° - 30° - Hydraulic full stroke vice - Saw frame mounted on preloaded linear guides - Infinitely variable saw band speed - Infinitely adjustable saw feed and cutting pressure - Automatic cutting pressure regulation - Precision carbide saw band guides - Powerful drive motor with 3,0 kW - Modern control with plain text display and membrane keyboard - Freely positionable control panel - Large dimensioned hydraulic unit - Machine designed according to current CE standards and safety guidelines inclusive: Minimum quantity lubrication digital mitre gauge frame height adjustment at the control panel price on request

Condition: new, Year of construction: 2024, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Gbjdpfxeidun Io Abdsg Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: good (used), Year of construction: 2002, Semi-automatic divider Eberhardt Piccolo Gr. 4 Gbodjxrdrfepfx Abdjg - used - year of manufacture: 2002 - weight range: 40-140 g - 2 trays - machine from production - cleaned and technically inspected - collection from warehouse / shipping option - price on request

Year of construction: 2025, condition: new, ECOSPIR TS These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Technical specifications: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter 1500 mm • Turntable permanent load 1200 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1.5 KW • Speed of the film carriage • Adjustment of foot and head wraps • Cross windings / spiral one-way winding Gjdshfdf Eepfx Abdjbg • Height detection by photocell • can wrap black products or stretch film (optional) • CE marked machine Warranty: 24 months (single-shift operation),

Condition: used, Year of construction: 2015, functionality: unexamined, For sale: Semi-automatic capsule filling machine for capsule production. Currently set up for size 0 capsules, complete with a vacuum pump. Also included is a semi-automatic capsule counter that automatically counts out the set quantity of capsules while packaging is being placed. (Both machines are being sold together as an inseparable package.) The equipment has seen very little use (only for production testing) and has been stored in a warehouse for many years. I cannot fully guarantee the technical condition of the capsule filler; however, when connected to power, all motors run properly, but a full technical inspection is recommended. The capsule counter has been checked and operates correctly, quickly counting the specified quantity (in multiples of 5 pieces). Details below: Capsule Filler: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: DJ-C Semi-automatic capsule filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 400V 50Hz (3-phase) Power: 3.1 kW Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: 135x70x160 cm Note: The capsule filler has visible dents on the housing (see photos) caused during transport, but the working elements are not damaged. Capsule Counter: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: HA-1 Capsule counting and filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 220V 50Hz (1-phase) Power: 60 W Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: approx. 150x70x50 cm The listed price is net. A VAT invoice is issued. For EU companies, 0% VAT for intra-Community supply. Gbsdpfx Abow D Et Dsdjg Assistance in organizing transport to the customer is possible. This is a courtesy listing; price and availability to be finally confirmed. The equipment is CE-marked (no manual or other documentation is included). We reserve the right to amend or withdraw the listing at any time without notice. This listing does not constitute a commercial offer as understood by commercial law.

Condition: as good as new (ex-display), Year of construction: 2022, I sell the semi-automatic finger joint line LESSPOJ. Year 2022. Input length 180-1.000mm Input width 20-160mm / 610mm in 1 step Input thickness 20-80mm Automatic finger joint unit with glue spraying 1 side Godpfxemig Tdj Abdsbg Automatic turning of the material for the 2nd pass on turning table Automatic feeding to the press Press 3,00 - 6,10m with automatic cycle and end-cutting saw Total area covered 16.250 x 3.684mm Strong construction. Very good condition. Available immediately.

Condition: new, Semi-automatic metal band saw with high cutting accuracy. With this machine 90° cuts, as well as mitre cuts, left up to 45° and right up to 30°, are infinitely variable possible. (Swivel range left 45° and right 60°) Basic equipment: - Large rotatable support table without wear! (The cutting channel of the saw band rotates with the mitre) - band tension indicator - hydraulic control of the cast iron saw arm - hydraulic clamping of the workpiece via short stroke cylinder - Height limitation of the saw frame by means of potentiometer from the control panel - hydraulic cutting pressure regulation (solid material - pipe) - Lowering of the saw arm via hydraulic cylinder; stepless adjustment - Lifting of the saw arm manually after the cut Gjdpsd Dpz Sofx Abdsbg - easy manual shifting of the vice R/L - electrical band tension control with saw band breakage control - coolant pump with double feed to the saw band guides - carbide saw band guides and guide rollers - Bi - metal saw band M 42 - chip brush Technical Data ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 Drive power: 1.5KW//400V//50 Hz Belt speed: 20-120 m/min infinitely variable Saw band dimension: 3125 x 27 x 0.9 mm Remaining piece length: 20 mm Smallest ø: 5 mm Material support height: 775 mm Dimension: 1700 x 1500 x 2100 mm Weight: 410 kg

Condition: new, Year of construction: 2024, Aluminum circular saw UK 600 HA 90°, semi-automatic The semi-automatic circular saw UK 600 HA 90° is an "upcut" machine and is mainly used for cutting used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and quick and quick and easy change of material. Only 90° cuts are possible with this machine! The saw feed takes place automatically at the touch of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Furthermore, this machine can be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! be equipped! Equipment Large support table, powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Clearly arranged control panel Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be moved backwards to increase the cutting cutting capacity can be moved to the rear Gedspa Nxdepfx Abdobg Large protective hood covers the entire working area Minimum lubrication system with 2 liter reservoir Adjustable blade and cutting feed Air gun for cleaning the machine Saw blade ø 600 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the vice and remove or push the material forward Technical data such as cutting range, power, etc. (see data sheet attached). Plantec Maschinen GmbH

Condition: like new (used), Year of construction: 2025, operating hours: 8 h, functionality: fully functional, total length: 7,000 mm, total height: 3,000 mm, total width: 2,600 mm, warranty duration: 12 months, 🟦 Semi-automatic Powder Coating Plant – Compact Container System Modern semi-automatic powder coating line built in a container-type enclosure, consisting of a powder coating booth, curing oven, and automatic transport system. This unit is a compact and mobile solution designed for coating small metal parts — ready for operation anywhere after connecting to power supply. Ideal for production companies, workshops, or service providers looking for an efficient and flexible coating system. 🔹 Technical Specifications CURING OVEN - Working chamber dimensions: 4000 x 700 x 1300 mm (L x W x H) - Heating power: 24 kW - Motor: 2.5 kW, 1500 rpm - Radial fan capacity: 4500 m³/h - Thermal insulation: 150 mm - Maximum temperature: 250°C POWDER COATING BOOTH - Working chamber dimensions: 2000 x 600 x 1400 mm (L x W x H) Gsdpfxexlr Emj Abdsbg - Filtration unit: * Motor: 2.2 kW, radial fan 12,500 m³/h * Two conical polyester filters L600 * Twist-type filter mounts * Pneumatic powder cleaning system with adjustable cyclic discharge AUTOMATIC TRANSPORT SYSTEM - Travel length: 11,500 mm - Hanger spacing: 250 mm - Number of hangers: 45 pcs - Maximum speed: 4 m/min - Motor power: 0.75 kW 🔸 Features and Advantages * Compact container design – easy to transport and quick to install * Low energy consumption and small footprint * Continuous process ensured by automatic conveyor system * High-efficiency filtration system * Fully equipped “plug & play” unit – ready to start immediately

Year of construction: 2025, condition: new, ECOSPIR EV These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Technical specifications: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter 1500 mm • Turntable permanent load 2000 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1 KW Gbodpfshfdc Rex Abdog • CE marked machine Warranty: 24 months (single-shift operation),

Year of construction: 2025, condition: new, SEMI AUTOMATIC PASTING MACHINE Gsdpfx Abognlv Djdsbg MODEL; MAGRAFKA-100 YEAR; 2025

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: RF5060-5-2021, Year of construction: 2021, Bradman Lake SL80 Semi-Automatic End-Load Cartoner Godpfx Abexqmmpedebg • Speed: up to 80 cartons per minute • Carton Size Range: A 50–254 mm | B 19–76 mm | C 140–304 mm • Feed: manual loading area for 2 operators • Glue System: Nordson ProBlue 4 hot-melt unit • Construction: stainless steel frame & panels, hygienic design, CE compliant • Vacuum Pump: Busch • Features: SIKO digital readouts, inverter drive, castors for mobility

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Gbjdpfx Abogwt Rvodog

Year of construction: 2025, condition: as good as new (ex-display), ECOSPIR EV These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Technical specifications: • Operation via TOUCH SCREEN Gjdjmt Du Nepfx Abdebg • Storage of 8 wrapping programs • Turntable diameter 1650 mm • Turntable permanent load 2000 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1 KW • CE marked machine Warranty: 24 months (single-shift operation), Options: Ramp for pallet truck & electric ant (Price on request)

Year of construction: 2023, condition: new, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Gjdpfx Aegwt R Djbdsbg Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Large mitre range from -22.5° to +45°, Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Gedpfopa Nxaex Abdobg Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH

Condition: new, Year of construction: 2024, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Gbsdpfxoidun De Abdsg Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2023, condition: new, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling Gjdpfx Absgwt Ryedsbg • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast, convenient material changes as well as simple mitre angle adjustment. The UK 352 HA has a continuously adjustable mitre range of up to 45° on the left and 0° on the right. The saw feed is automatic at the touch of a button and the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Equipment - Precision underfloor circular saw - Mitre adjustment left 45º / 90º / right-45º degrees - incl. 2 pneumatic clamping vices (vertical) - Saw blade feed infinitely adjustable - Two-hand safety control - Adjustable material stop (rear) - Extraction device - chip extraction system - Mist spraying device for air-oil cooling - Air gun with spiral hose - incl. maintenance unit with pressure reducer - Ergonomically arranged control panel - Max. cutting height 125 mm - Saw blade 350 mm - Saw blade not included in scope of delivery! Gsdpfxegwt Rrs Abdebg It is possible for you to view the desired system in our production/demonstration hall at any time. Please do not hesitate to contact us. Plantec Maschinen GmbH

Condition: new, Year of construction: 2024, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Gbjdpfx Asgcbwgsbdsg

Condition: new, Year of construction: 2024, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed Gedpfx Abogwt Rnjdebg • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.