Used Side Milling Cutter for sale (11,843)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 16,722 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,200 rpm, controller model: Heidenhain iTNC 530, Submission of a bid obligates the buyer to collect the machine by the end of this year! TECHNICAL DETAILS Travel X: 4,000 mm Travel Y: 1,200 mm Travel Z: 1,000 mm Maximum spindle speed: 4,200 rpm Tool holder: SK50 DIN 69871 Table load capacity: 10,000 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 Operating hours Control unit on-time: 47,181 h Machine on-time: 45,697 h Program running time: 16,722 h EQUIPMENT 45° diagonal milling head with 2.5° indexing Drum-type tool changer with 24 tool positions (vertical tool change) Prsdjxx Uayepfx Adisd Machine enclosure: front guard with 2 doors Rear guard with additional door Side slats for machining of extra-long workpieces Longitudinal chip conveyor (discharge on right-hand side) Control cabinet air conditioning Swivel arm for machine control (operation from front and rear)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 130 kg, arm reach: 2,194 mm, repeat accuracy: 0.06 mm, spindle speed (max.): 24,000 rpm, number of axes: 6, The system is completely unused. The system consists of: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit - Chip conveyor - Rotary table for pallet loading - Complete enclosure of the working area - Tool carrier pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Prodpfxext Nzbj Adisd Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Reach: 2,194 mm × 370° Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: Taper ISO30 Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45°C Ambient humidity: 20–80% rH Weight: 980 kg Note regarding sale: The system was intended for milling roof racks. However, a change of shareholder for the user occurred during delivery. The new shareholder did not take over the system. Further details on the equipment can be found in the attached documentation.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: NL201FC1175, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 590 mm, controller model: MSX-850 III CONTROL, The machine has only been used for plastics! TECHNICAL DETAILS Psdpjxyidpjfx Adierd Travel X-axis: 260 mm Travel Y-axis: 100 mm (+/- 50 mm) Travel Z-axis: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Number of driven tools: 3 Tool turret: 16-position Bar capacity: 65 mm Axes: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher chuck Driven tools Tailstock Parts catcher Tool setting probe Dust extraction system

Condition: used, Used Alpine Model 630AFG stainless steel Aeroplex fluidized bed opposed jet milling system. Stainless steel classifier wheel belt driven by 15kw, 400/690volt, 2/50, 2940rpm motor. Unit includes (4) jet nozzles. Includes product feeding vessel approx 230 litre capacity with stainless steel screw feeder driven by 1.5kw, 400volt, 3/50, 1440rpm motor. Unit all mounted on common mild steel frame. Specifications: Prjdpfx Adexyxlcsied Motor Power: 20.1 hp

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: ML0107-000373, Doosan PUMA 2600 L Swing 780mm X-Axis 260 mm Z-Axis 1350 mm FANUC i Series Swarf conveyour Renishaw Toolsetter Pjdpfjxw Ilmex Adisrd

Condition: used, Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Approx. 3000mm Between Centres, 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Includes Various Tool Holders and Sleeves in Tool Turret and Boxes Prjdpfxsxzq Ufo Adiod Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, Pedpjvz A Rijfx Adijrd table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards.

Condition: excellent (used), Year of construction: 1984, Ref:11030 . 1984 Kolbus KS Cloth Cutter For slitting & cross cutting of various materials including calico, linen, gauze, PVC, etc. Equipped with: Double friction rewinder Extended delivery table Specification: Max. width of material: 1400 mm Prodpfoxyim Rox Adiod

Condition: good (used), Year of construction: 2004, turning length: 2,000 mm, Model: E-650H Control: Mazatrol 640M Pro Year: 2004 Distance Between Centres: 2000mm Swing Over Bed: 905mm Machine With: Pedpfx Adoxvyq Ejisrd C Axis Y Axis Live Tooling/Milling B Axis 800mm Power Chuck Manual Steady 375mm Open Steady 600mm Air Filer Mist

Condition: used, Mecof Bed Milling Machine, Moving Column, 9m x 2.2m Table, Angle plate 1m x 2.5 x 1.2, two sub tables 1m x 1.5m. Heidenhain 426 control Psdpfx Adoxaz E Ssierd

Condition: used, Year of construction: 2007, Mori Seiki NT5400/1800 SZ DCG CNC Twin Spindle Turn & Mill Machine with DMG Mori MSX-701 III CNC Control, Max Work Piece Swing 920mm, Max Turning Length 1921mm, Bar Work Capacity 107mm, Travels x 1 Mill Head 1040mm, Y Axis +/- 255mm, Z I Axis 1940mm, B Axis +/- 120 deg, X 2 267mm, Z 2 1830mm, Spindle Speed 2400rpm, Capto C8 Spindle Taper, Spindle Bore 120mm, Tool Head Spindle Speed 8000rpm, Tailstock Travel 1830mm, 10 Position Tool Turret, (2) x 450mm Powered 3 Jaw Chucks, High Pressure Coolant Filtration System, Clean Mist Oil Mist Extractor, Machine Weight 36000kg. S/No. NT540GE0032 (2007) Prodpfexzq R Hex Adied Location: These lots are located in Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2007, Maximum cutting diameter 820mm, maximum cutting length 1500mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, swarf conveyor Predpou Rb Snsfx Adijd

Condition: used, Year of construction: 2023, AJAX AJPR350 CNC Milling Machine Table Size 600mm x 163mm, X Axis Travel 350mm, Y Axis Travel 160mm, Z Axis Travel 400mm, Rapid Traverse 5m/min, Main Motor Power 3kw, Tool Changer 12 Tools, Max Table Load 50kg, Machine Weight 900kg, CNC Control Siemens 808D, Motor Type AC Servo, Spindle Taper BT30, Spindle Speed 18,000rpm, Machine Working Hours – 200 hours. S/No. 41840 (2023) Pjdoxzfvwspfx Adijrd Location: These lots are located in Newcastle upon Tyne, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Pjdpfx Adoxv Svmoijrd Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: good (used), Year of construction: 2009, 750mm Swing, 540mm max. machining diameter, Podpfxsw Npz Io Adisrd 1020mm max turning length, 5000rpm main spindle, 5000rpm Sub spindle, 65mm bar capacity, 12 station lower turret, 12000rpm milling 18.5kW, 22kW spindle motors, FANUC 3iTB control, 3 Jaw Power Chucks, tool setter, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2008, Maximum cutting diameter 820mm, maximum cutting length 3048mm, C axis 0.0001 degrees, B axis -30/+210 degrees, 40 ATC, spindle speed 1,600 rpm, Prodpfotmtktjx Adijd Milling speed 10,000rpm., main spindle 37Kw, spindle taper din50, Y axis -/+ 250mm, Mazatrol Matrix control, fixed steady, swarf conveyor

Condition: excellent (used), Year of construction: 2015, Maximum cutting diameter 640mm, maximum cutting length 1100mm, Psdpett Nrtofx Adierd bar capacity 80mm, B axis -120/+105 degrees, C axis 0.001 degrees, Spindle power 18.5Kw, spindle speed 3,500 rpm, milling power 15Kw, milling speed 12,000 rpm, sub spindle speed 3,500 rpm, 40 station ATC, Y axis travel -/+ 125mm, Fanuc 31i control, magazine barfeed, swarf conveyor, parts catcher.

Condition: good (used), Year of construction: 2015, Swing over bed 720mm, maximum machining diameter 420mm, Pjdpfxjvgz D Eo Adijrd maximum machining length 1274mm, bar capacity 77mm, spindle speed 4,000rpm, milling speed 4,000rpm, 12 station turret, Mazatrol smart control, swarf conveyor, parts catcher, tool setter, and 3 jaw chuck, magazine barfeed unit.

Condition: good (used), Year of construction: 2011, Maximum cutting length 118mm (spindle 1), 125mm (spindle 2), Maximum cutting diameter 165mm, bar capacity 64mm, Prsdpfou Hk Aujx Adiod spindle speed 4,000 rpm, sub spindle speed 5,000rpm, milling speed 6,000rpm, C axis 0.001 degrees, spindle power 15/11Kw, 12 station upper & lower turrets, Y axis +/- 40mm. Fanuc control, swarf conveyor, barfeed unit.

Condition: excellent (used), Year of construction: 2010, 412mm max. machining diameter, Podpowxw A Hsfx Adiord maximun turning length 753mm, 225 degree movement on B axis, 15HP spindle motor power, 6,000rpm spindle speed, 6,000 rpm sub spindle speed, 52mm bar capacity, milling speed 12,000rpm C axis & Milling, 9 station lower turret. Swarf conveyor, tool setter, Coolant, Interlocked guards, Swivelling Universal Head., C Axis (0.001deg), Mazatrol Matrix control

Condition: excellent (used), Year of construction: 2017, Mazatrol Smooth G Control, Bar capacity 65mm, maximum machining diameter 344mm, 2 off 12 Station Turrets, 1325mm between spindles, C axis to both Spindles (0.0001 degree) Y Axis on both Turrets, Spindle Speed 5000rpm, Spindle Motors 22kW, Milling 6000rpm on both Turrets, Swarf conveyor, Tool Setter, Hydrafeed Magazine Barfeed Psdpfx Ajtt Nwijdiord

Condition: good (used), Year of construction: 2012, 750mm Swing, 500mm max. machining diameter, 1300mm max turning length, 3000rpm main spindle, 65mm bar capacity, 8,000rpm milling 20kW, C axis 0.001 degrees, Y axis - 90/+120mm, 40 station ATC, , milling speed 4,000rpm, 30kW spindle motors, FANUC 31i control, Predpfoxqyg Nsx Adijd 3 Jaw Power Chuck, Swarf Conveyor, Coolant, tool setter, parts catcher, barfeed unit.

Condition: excellent (used), Year of construction: 2014, 1000mm Swing, Podpfxjw I Tnie Adijrd 760mm max. machining diameter, 1540mm max turning length, 4000rpm main spindle, 76mm bar capacity, 12000rpm milling 18.5kW, C axis 0.001 degrees, Y axis -/+115mm, 40 station ATC, 12 station lower turret, milling speed 4,000rpm, 22kW spindle motors, FANUC 31i control, 3 Jaw Power Chuck, Swarf Conveyor, Coolant

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), Psdpoxftqdofx Adierd quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control,

Condition: good (used), Year of construction: 2012, Bar capacity 51mm, maximum cutting diameter 255mm, Y axis travel +/- 40mm, C axis to both spindles 0.001 degrees, Pjdpfovzry Tox Adisrd 12 station upper & lower turrets, Spindle power 18kw, spindle speed 5,000rpm, milling power 18kw, milling speed 6,000rpm, Sub spindle travel 650mm, swarf conveyor, tool setter, parts catcher, collet chucks, tooling, magazine barfeed, & shaft unloader