Used Single Screw Extruder for sale (28)

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A Ijdpfsfnvwqsx Ah Djtk - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *Technical specification: -air-cooled, 25.5 kW referred to +10°C flow temperature at an ambient temperature of +32°C. -temperature range flow: +5°C to +30°C (optionally lower temperatures down to -5°C possible) -air flow rate: 8,000 m³/h -max. air inlet temperature: +30°C -Optionally with heating capacity up to 24kW *Pumps: -Delivery capacity up to 150 ltr/ min. -Delivery pressure up to max. 4 or 7 bar -Motor output 1.1 or 2.2 kW *Dimensions: -L/W/H: 1,450 mm x 750 mm x 1,680 mm -empty weight: approx. 480 kg -Circulation medium connection: DN 32 IG *Details & Highlights: -Internal refrigerant: R 123 a -Power supply: 380-425V/ 50Hz -Regulation and control unit SBC-T -Setpoint and actual value display, alarm display -Fully hermetic reciprocating compressor -Refrigerant receiver with safety valve according to DIN EN 378 Itedpfx Aog Ewwrsh Dsk -capacity control -frost protection monitoring -Flow monitoring -grid cover over condenser -oil sump heater -drainage device -Level monitoring by magnetic float switch -installed dirt trap in the return line in the circulating medium -overflow valve between flow and return as pump protection, fixed setting -high and low pressure limiter according to DIN EN 378 -stainless steel tank, capacity: 80 litres, open system completely insulated Self-supporting housing with castors, mobile -system for indoor installation -control box IP 54 Other performance classes are available on request. Visit our homepage for further details. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). Ijdsg Ezarspfx Ah Dotk *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.