Used Solon 2 for sale (76,319)

Condition: excellent (used), 2 x MONO 7 TRAY OVENS (2 X ON STAND) There are two separate 7 tray ovens stacked together on a Wheeled stand. Extraction unit also available (optional) Both ovens are in excellent condition inside - They have only been used to bake macarons. 3 Phase Gsdpfeyr Ibljx Abvjtw

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI Gedpfxoyug R Re Abvotw controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: used, axle configuration: 3 axles, first registration: 06/2013, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,620 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,400 mm, color: other, Year of construction: 2013, Equipment: ABS, = Additional options and accessories = - EBS = Remarks = Number of axles: 3, Payload: 31,600 kg, Unladen weight: 11,400 kg, Gross vehicle weight: 43,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air, ABS, EBS, Body year: 2013, Refrigeration unit manufacturer: Carrier, Refrigeration unit model: Vector 1950, Cooling unit: Diesel/electric, Engine hours (electric): 1,025, Engine hours (diesel): 12,111, Wall thickness: 45 mm, Type of cooling: Refrigerated, Additional evaporator, Axle type: BPW = Further information = General information Cab: Day cab Registration number: OS-88-RS Drivetrain Fuel type: Diesel Transmission Transmission: Manual Axle configuration Tire size: 385/55R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 5 mm; Tire tread right: 6 mm Axle 2: Tire tread left: 11 mm; Tire tread right: 7 mm Axle 3: Tire tread left: 7 mm; Tire tread right: 4 mm Weights Unladen weight: 11,400 kg Payload: 31,600 kg Gross vehicle weight: 43,000 kg Functional Refrigeration unit: Diesel and electric (12,111 operating hours diesel; 1,025 electric) Wall thickness: 45 mm Environment Emission class: Euro 0 Condition General condition: moderate Technical condition: moderate Visual condition: moderate Damages: none Godpsyupbxofx Abvjtw = Company information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good pricing • Honest dealing • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • Security of 'recognizable quality' • And more.... Please visit our website for special offers and the complete stock list. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask us directly about our European warranty package.

Condition: good (used), mileage: 194,419 km, power: 110 kW (149.56 HP), first registration: 08/2016, fuel type: diesel, tire size: 205/65R16, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: grey, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 5, total length: 5,400 mm, total width: 1,900 mm, total height: 1,940 mm, loading space length: 1,600 mm, loading space width: 1,620 mm, loading space height: 1,370 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional options and equipment = - Heated mirrors - Bluetooth - Tinted windows - Halogen headlights - None - Manual - Radio/cassette - Fabric - Partition wall = Remarks = Configuration: 4x2, Payload: 1,004 kg, Curb weight: 1,996 kg, Gross weight: 3,000 kg, Unbraked trailer load: 750 kg, Braked central axle trailer load: 2,500 kg, Trailer hitch, Cabin type: Double cab, Cruise control, Air conditioning, Number of airbags: 2, Parking assistance: Park assist, Tinted windows, Electric windows, Electric mirrors, Partition wall, Radio/cassette, GPS navigation, Color: Grey, Metallic, Heated mirrors, Lighting type: Halogen headlights, Bluetooth, Engine power: 110 kW (148 hp), Fuel: Diesel, Euro 6, Drive technology: Timing belt, Transmission type: Manual gearbox, Gears: 6, Power steering, ABS, ASR, Starter battery, Side panels lined, Roof rack: None, Side doors: 1, Side windows: 2, Rear closure: Double door, Central locking, Seats: 5, Seating arrangement: 1+1+3, Seat upholstery: Fabric, Seat adjustment: Manual, Spare wheel, Tire type: Summer tires = Further information = General information Number of doors: 1 Registration number: V-16-DPL Axle configuration Tire size: 205/65R16 Brakes: Disc brakes Suspension: Coil spring suspension Axle 1: Tire tread left: 8 mm; Tire tread right: 8 mm Axle 2: Tire tread left: 8 mm; Tire tread right: 5 mm Weights Curb weight: 1,996 kg Payload: 1,004 kg Gross vehicle weight: 3,000 kg Functional Loading platform height: 59 cm Gedsyun Sispfx Abvjtw Maintenance MOT (periodic technical inspection): Valid until 03/2027 Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 2

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 1,100 mm, We offer this used Kundig Brilliant 2 wide belt sander, year of construction 2016. Working Width: 1100mm unit 1: calibrating unit unit 2: fine finish with lacquer sanding features Gjdpfoyupq Hjx Abvotw can load on lorry and help to organise shippment If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), axle configuration: > 3 axles, first registration: 07/2015, suspension: air, color: blue, Year of construction: 2015, Axle configuration Make axles: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Steering Rear axle 2: Lift axle; Steering Rear axle 3: Steering Gjdpfx Ajyt R T Hjbvjtw Weights Empty weight: 8.500 kg Carrying capacity: 45.500 kg GVW: 54.000 kg Maintenance, history and condition APK (MOT): tested until 07/2026 Technical condition: good Visual appearance: good Financial information Asking price: 24.750 (excl. BTW) Additional information Please contact Arie or Pedro for more information

Condition: good (used), axle configuration: > 3 axles, first registration: 07/2015, suspension: air, color: blue, Year of construction: 2015, Axle configuration Make axles: SAF Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Steering Rear axle 2: Lift axle; Steering Gsdpoyt R Tgsfx Abvotw Rear axle 3: Steering Weights Empty weight: 8.500 kg Carrying capacity: 45.500 kg GVW: 54.000 kg Maintenance, history and condition APK (MOT): tested until 05/2026 Technical condition: good Visual appearance: good Financial information Asking price: 24.750 (excl. BTW) Additional information Please contact Arie or Pedro for more information

Condition: used, Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V Gsdpfxswng S Ae Abvstw 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Material of press plates: Aluminium - Number of cylinders [pcs]: 10 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs.]: 3 - Table length [mm]: 2200 - Table width [mm: 1500 - X-axis travel [mm]: 2500 - Y-axis travel [mm]: 1400 Gtodpfx Aswfpbbjbvew - Z-axis travel [mm]: 1000 - Spindle diameter [mm]: 100 - Options: Digital readout Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, turning diameter: 340 mm, turning length: 2,000 mm, total length: 4,270 mm, total width: 2,130 mm, total height: 1,840 mm, overall weight: 3,900 kg, 2-Axis Teach-In / Cycle controlled CNC Lathe Gtsdpfoyr I Rtjx Abvew CNC Control Fagor 8055 I Power TC Turning diameter 340/570 mm Turning length 2000 mm Center height 275 mm Spindle bore diameter 108 mm Spindle nose D 1-8 Spindle speed 0-2.500 R/min Movement X-axis 310 mm Movement Z-axis 2000 mm If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. Gtedpfoyhc Irsx Abvew - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: used, Year of construction: 1997, Overview The following 2 component mixer was built in 1997 by the German manufacturer Krones. The machine is available immediately in its current good condition.  Technical data  capacity 45,000L/h suitable for carbonated drinks year of manufacture: 1997 Gtedpfx Absyub T Hovsw

Condition: good (used), Year of construction: 2007, operating hours: 3,082 h, load capacity: 5,000 kg, lifting height: 5,020 mm, fuel type: gas, mast type: triplex, construction height: 2,500 mm, mileage: 3,082 km, This 5-ton LPG forklift by Mitsubishi is from 2007 and is in good condition. Starts, drives, and lifts without any issues. Capacity: 5,000 kg. Lifting height up to 5,020 mm. Equipped with FREELIFT, SIDESHIFT, and FORK SPREADER. Fitted with a new starter battery. Watch the video online! Gjdpjxz Thzefx Abvotw

Condition: used, Used Cuccolini model VPM900 2/X stainless steel 3-deck screen. Screen measures approximately 900mm diameter. Unit has 0.73Kw, 1440rpm BOMEC vibrator motor. Weight: Estimated: Kg200.0 Dimensions: 1100mm X 1100mm Gtsdpfeygvncjx Abvow Equipped With: Fitted with 300 micron & 500 micron ball tray screens. Can also include spare 710micron ball tray screen.

Condition: used, Used Kason model K40-2-SS stainless steel 2-deck screen. Screens measures approximately 900mm diameter. Unit has (3) product discharges. Gedpfx Asygvm Sebvjtw

Condition: used, Little used Niro model MP3/2/3 10 bar stainless steel multi processor fluid bed dryer / granulator / coater. Rated 10 bar over pressure. Unit includes various bowl inserts, spray arms, and air handling system. Gedpjygvmlefx Abvstw

Condition: excellent (used), Year of construction: 2019, ACS Angelantoni Model: ACS WZH10-4080-2 BT Angelantoni Walk-in Climatic Chamber ACS WZH10-4080-2 BT Optimized for Battery Testing (Li-Ion) Gedpfeyg I Eysx Abvstw -40°C to +80°C Description: For sale is a walk-in climate and environmental test chamber from the renowned manufacturer Angelantoni Test Technologies (ACS), model WZH10-4080-2 BT, year of manufacture 2019. The system is designed for demanding industrial, development, and research testing and is equipped with advanced safety features specifically tailored for battery and accumulator testing (e.g., lithium-ion). Special feature: Safety equipment for battery testing: The system is specially equipped for battery and accumulator testing, including: - Pressure relief flap for controlled pressure discharge in the event of a malfunction - Gas detection system for early identification of critical gas concentrations - Aerosol fire suppression system (SalgroMAG) → Ideal for lithium-ion testing Suitable for: - Batteries & accumulators (including lithium-ion) - Electronics & control units - Automotive components - Industrial & research tests - Endurance, aging, and stress tests Technical data (from nameplates & documentation) General: Model: WZH10-4080-2 BT Year of manufacture: 2019 Standards: CE, IEC/EN 60204-1 Design: Walk-in climatic chamber, double-door Test range: Temperature: –40 °C to +80 °C Relative humidity: 10% to 95% RH Electrical data: Supply: 400 V 3-phase + N + PE 50 Hz Rated power: approx. 37 kW Full load current: approx. 115 A Protection rating: IP54 Short-circuit strength: 10 kA Refrigeration system Refrigerant: R452A Charge: approx. 50 kg CO₂ equivalent: approx. 107 t Dimensions: External dimensions (approx.): Length: ~4.5 m Width: ~2.2 m Height: ~2.4 m Weight: approx. 3,800 kg Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Year of construction: 2025, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. Gedpfsyuc Tuex Abvetw The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Gtedpfx Absyuc Rgevsw In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. Gsdjyuc I Eepfx Abvetw This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement! Gjdpfsyuc Edjx Abvetw

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-2, Our carton sealing machine, type VOGEL MH-FJ-2, is equipped with a side drive belt system. The machine automatically adjusts to the respective carton size within the specified range. Carton formats: Length 150 – ∞ mm Width 140 – 480 mm Height 120 – 480 mm Technical data: Length 1,150 mm Width 1,005 mm Weight 250 kg Operating voltage 220 V Gtodpfx Aboyuc Rajvew Air pressure 5 kg/cm² CE marking IMPORTANT: An air supply is required to operate the machine; this is not included in the delivery scope. Our carton sealer MH-FJ-2 is specifically designed for changing carton formats. Thanks to the pneumatic adjustment of height and width, a wide variety of carton sizes can be processed quickly and easily without manual intervention. The machine adapts immediately to different formats. Two side and two top conveyor belts transport your cartons safely through the sealer. The top flaps of the cartons must be folded down manually before they are fed into the machine. This machine is designed for adhesive tapes with a 76 mm core diameter and 50 mm width. We recommend using machine tapes with longer lengths per roll (compared to hand rolls), allowing you to work longer without having to change the tape. Both PP and PVC tapes as well as eco-friendly paper tapes can be used. The tape units can be easily removed for quick tape change. Additionally, this function can be used if you wish to seal cartons only on top (keyword: auto-bottom cartons). Of course, this machine is also CE marked. Please note that a compressed air connection on-site is required for operation! Accessories: For our VOGEL carton sealer range, we offer optional castors, infeed and outfeed tables, and roller conveyors.

Condition: good (used), 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: EB5 DW -Price: per piece -Quantity: 1 available Gjdob A Nrhjpfx Abvotw -Weight: 3.6 kg

Condition: used, power capacity 38 Nm volt 0 V Godeytg Tiepfx Abvstw ampere 42 A weight of the machine ca. 59 Kg

Condition: good (used), mileage: 999,500 km, power: 265 kW (360.30 HP), first registration: 09/1997, fuel type: diesel, tire size: 295/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 600 l, color: red, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro2, suspension: steel-air, Year of construction: 1997, Equipment: ABS, cruise control, differential lock, = Further Options and Accessories = - 600 liter diesel tank - Heated exterior mirrors - Comfort driver's seat - Differential lock - Speed limiter - Radio/CD player - Rotating beacon lights - Sleeper cab - Sun visor - ZF16 manual transmission = Remarks = GOOD CONDITION DAF FT95-360 ATI SPACECAB 4x2 TRACTOR UNIT (EURO 2) WITH ZF16 MANUAL GEARBOX (FORMER DUTCH REGISTRATION (BF-JT-56)!! 360 HP, EURO 2 (MECHANICAL FUEL PUMP AND INJECTORS)!! ZF16 MANUAL TRANSMISSION!! 600 LITER DIESEL TANK!! ETC!! Gsdpfx Absuy I Iuevetw PERFECT COLLECTOR'S ITEM, TRUCK IS IN GOOD DRIVING CONDITION, READY FOR WORK!! MORE DAF CF/XF 4x2 / 6x2 / 6x4 / 8x4 (EURO 2/3/4/5/6) AVAILABLE IN STOCK FOR SALE!! (>85 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, LOADING, TRANSIT REGISTRATION OR TRANSPORT? NO PROBLEM FOR US; WE ARE A "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,600 cc Transmission Gearbox: ZF16 MANUAL TRANSMISSION, 16 gears, manual Axle Configuration Tire size: 295/80R22.5 Brakes: drum brakes Front axle: Max. axle load: 7,500 kg; Steered; Tire tread left: 20%; Tire tread right: 20%; Suspension: leaf suspension Rear axle: Twin tires; Differential lock; Max. axle load: 11,500 kg; Tire tread left inside: 10%; Tire tread left outside: 10%; Tire tread right inside: 10%; Tire tread right outside: 10%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 6,960 kg Payload: 12,040 kg Gross vehicle weight: 19,000 kg Functional Bodywork brand: ZF Condition Technical condition: very good Visual condition: average Identification Registration number: BF-JT-56 Further Information For more information, please contact Sales Department or Erik Engel.